International at Kaslo Bay. | |
History | |
---|---|
Name | International |
Owner | International Navigation & Trading Co.1896-1898; Kootenay Railway and Navigation Co.1898-1911 |
Route | Kootenay Lake |
Builder | James Carson |
In service | 1896 |
Out of service | 1908 |
Identification | Canada 103489 |
Fate | Taken out of service in 1908; sold for use as a floating hotel in 1912; lay derelict until 1952 when destroyed by fire. |
General characteristics | |
Type | inland passenger/freighter |
Tonnage | 526 GT; 281 NT |
Length | 142 ft (43.28 m) |
Beam | 24.9 ft (7.59 m) |
Draft | 3.5 ft (1.07 m) |
Depth | 5.6 ft (1.71 m) depth of hold |
Installed power | twin high pressure steam engines, horizontally mounted: cylinder bore 16 in (41 cm); stroke 6 ft 6 in (198 cm) |
Propulsion | stern-wheel |
Speed | 15 miles (24 km) per hour (max) |
International was a stern-wheel driven steam boat that operated on Kootenay Lake in British Columbia from 1896 to 1908. International was owned by a Canadian subsidiary of the Great Northern Railway and was involved in sharp competition, including steamboat racing, with similar vessels owned by the Canadian Pacific Railway.
International was built at the Mirror Lake shipyard just south of Kaslo, British Columbia by James Carson for the International Navigation & Trading Company. [1] [2] The IN&T's rival, the Columbia and Kootenay Steam Navigation Company had launched the steamer Kokanee in April 1906 at Nelson, prompting IN&T to build International in response. [2] The frames for International were pre-manufactured and shipped to Mirror Lake, where they arrived in April 1896, and construction began soon afterwards. [2]
International was 142 ft (43.28 m) long measured over the hull, and exclusive of the extension over the stern, called the fantail, on which the stern-wheel was mounted. [1] The beam was 24.9 ft (7.59 m) and the vessel had a 5.6 ft (1.71 m) depth of hold. [1] International drew 3.5 ft (1.07 m) feet of water. [2]
The overall size of International was 526 gross tons and 281 net tons, with ton in this instance being a measure of volume and not of weight. [1]
The Canadian merchant vessel registry number for International was 103489. [1] International was licensed to carry 300 passengers. [3]
International was propelled by a stern-wheel, which was turned by twin high pressure steam engines, horizontally mounted, each with a cylinder bore 16 in (41 cm) and a piston stroke of 6 ft 6 in (198 cm). [1] The engines were manufactured by the Iowa Iron Works Co., of Dubuque, Iowa. [1] The boiler was manufactured by John Inglis and Company, of Ottawa, Ontario. [2]
International was launched in November 1896. [4] Despite early expectations that International would be a “flyer,” the boat struggled to maintain a speed of 15 miles (24 km) per hour. [4] Even so, International was raced against other steamers on the lake, and on December 12, 1896, was able to outrun Kokanee by two boat lengths. [4] International was favored by the townspeople of Kaslo, while its rival Kokanee was popular in Nelson. [2] Although International and Kokanee raced on at least two occasions, which of the two was the faster boat was never settled. [2] International also raced against Moyie and Kuskanook [5]
In February 1897, IN&T's time card for International showed a departure time from Kaslo bound for Nelson, at 5:30 a.m., stopping at Ainsworth, Pilot Bay, Balfour and way points. [2] Returning, International departed Nelson at 4:40 p.m. [2] Rail connections to Spokane and Northport, Washington, and Rossland, BC were made at Five Mile Point, near Nelson. [2] The run between Kaslo and Nelson took about two hours. [5]
From 1896 to 1901, International was placed on the route between Nelson, British Columbia and Kaslo. [1] From 1902 to 1906, International was operated on the same run, but as a relief vessel for the newer steamer Kaslo. [1]
In 1898, the Great Northern Railway organized a Canadian subsidiary, the Kootenay Railway and Navigation Company. [6] KR&N took over the operations of IN&T, including the International. [6] In 1906 International was rebuilt at the Mirror Lake shipyard. [6]
From 1906 to 1908 International returned to the Kaslo-Nelson route, as the primary vessel. [7]
.
At about the same time, the Great Northern began to wind up its operations in the Kootenay region, and other than Kaslo, very little maintenance was done on its boats after 1906. [7]
In 1909 International’s boiler failed. [7] The boiler was removed in 1910. [7] The new boiler was never delivered, and International was never returned to service. [1] [7] When KR&N ceased operations, International was taken to Mirror Lake and beached. [7] In March 1912 International was sold to Gus Mathew for use as a tourist lodge at Riondel, British Columbia. [1] International lay derelict at Riondel for many years, and was finally destroyed by fire in 1952. [1]
The Moyie is a paddle steamer sternwheeler that worked on Kootenay Lake in British Columbia, Canada from 1898 until 1957.
Bonnington was a sternwheel steamboat that ran on the Arrow Lakes in British Columbia from 1911 to 1931. Bonnington and two sisterships were the largest sternwheelers ever built in British Columbia. Bonnington was partially dismantled in the 1950s, and later sank, making the vessel the largest freshwater wreck site in British Columbia.
The era of steamboats on the Arrow Lakes and adjoining reaches of the Columbia River is long-gone but was an important part of the history of the West Kootenay and Columbia Country regions of British Columbia. The Arrow Lakes are formed by the Columbia River in southeastern British Columbia. Steamboats were employed on both sides of the border in the upper reaches of the Columbia, linking port-towns on either side of the border, and sometimes boats would be built in one country and operated in the other. Tributaries of the Columbia include the Kootenay River which rises in Canada, then flows south into the United States, then bends north again back into Canada, where it widens into Kootenay Lake. As with the Arrow Lakes, steamboats once operated on the Kootenay River and Kootenay Lake.
James William Troup was an American steamship captain, Canadian Pacific Railway administrator and shipping pioneer.
The Rossland was a sternwheel steamboat that ran on the Arrow Lakes in British Columbia. It was named after Rossland, British Columbia, once a prosperous mining town in the region.
Minto was a sternwheel steamboat that ran on the Arrow Lakes in British Columbia from 1898 to 1954. In those years of service, Minto had steamed over 3.2 million kilometers serving the small communities on Arrow Lakes. Minto and her sister Moyie were the last sternwheelers to run in regularly scheduled passenger service in the Pacific Northwest. The "Minto" class of sailing dinghies is named after this vessel.
Kootenai was a sternwheel steamboat that ran on the Arrow Lakes in British Columbia from 1885 to 1895. Kootenai was the second sternwheeler to run on the Arrow Lakes. This vessel should not be confused with the similarly named Kootenay, an 1897 sternwheeler that also ran on the Arrow Lakes.
Lytton was a sternwheel steamboat that ran on the Arrow Lakes and the Columbia River in southeastern British Columbia and northeastern Washington from 1890 to 1904.
Columbia was a sternwheel steamboat that ran on the Arrow Lakes in British Columbia from 1891 to 1894. Columbia should be distinguished from the many other vessels with the same or similar names, including in particular the propeller-driven steamboat Columbia that ran on the Arrow Lakes for many years.
The Nakusp was a sternwheel steamboat that operated from 1895 to 1897 on the Arrow Lakes of British Columbia.
Klahowya was a sternwheel steamer that operated in British Columbia on the Columbia River from 1910 to 1915. The name "Klahowya" is the standard greeting in the Chinook Jargon.
Marion was a small sternwheel steamboat that operated in several waterways in inland British Columbia from 1888 to 1901.
Francis Patrick Armstrong was a steamboat captain in the East Kootenay region of British Columbia. He also operated steamboats on the Kootenay River in Montana and on the Stikine River in western British Columbia. Steam navigation in the Rocky Mountain Trench which runs through the East Kootenay region was closely linked to Armstrong's personality and career. In addition to being a steamboat captain, Armstrong was also a prospector, white-water boat pilot and guide in the Big Bend country of the Columbia River.
The river sternwheeler Ramona operated from 1892 to 1908 on the Willamette River in Oregon, on the Stikine River running from Wrangell, Alaska into British Columbia, and the Fraser River, in British Columbia. This vessel should not be confused with the coastal steamship Ramona which also ran in Alaskan waters.
Steamboats operated on the Stikine River in response to gold finds in along that river and in the Cassiar Country of northwestern British Columbia, Canada.
Monte Cristo was a sternwheel steamboat which was operated in Puget Sound and the coastal rivers of the state of Washington and the province of British Columbia.
SS Aberdeen was a steamship commissioned by Canadian Pacific Railway company. It was the first CPR steamship on Okanagan Lake and carried passengers and cargo from Okanagan Landing to Penticton from 1893 to 1919. Aberdeen connected communities along Okanagan Lake for the first time, creating a new era in the Okanagan Valley and greatly aiding the economy and settlement of the interior of British Columbia.
SS Kootenay was a Canadian Pacific Railway (CPR) wooden-hulled sternwheeler that serviced the Arrow Lakes in British Columbia, Canada from 1897 to 1919. She was a large freight and passenger steamship and the first in a series of CPR riverboats built for the Arrow Lakes.
Kuskanook was a wooden, stern-wheel driven steamboat that operated on Kootenay Lake, in British Columbia from 1906 to 1931. After being taken out of service, Kuskanook was sold for use as a floating hotel, finally sinking in 1936. The vessel name is also seen spelled Kooskanook.
Nasookin was a sternwheel-driven steamboat that operated on Kootenay Lake in British Columbia from 1913 to 1947. Nasookin was one of the largest inland steam vessels ever to operate in British Columbia and the Columbia River and its tributaries. Nasookin became surplus to its original owner, the Canadian Pacific Railway, and was transferred to the British Columbia Provincial government which used it as an auto ferry until 1947. Negligent mooring of the steamer in 1948 led to irreparable damage to its hull, and it was later scrapped. Portions of the upper works were salvaged and used as a house.