Lytton (sternwheeler)

Last updated
Lytton (sternwheeler).jpg
Lytton
History
Canadian Red Ensign (1868-1921).svg Canada
NameLytton [1] [2] [3] [4]
Owner Columbia & Kootenay Steam Navigation Co.; Canadian Pacific Railway
Route Arrow Lakes
Builder Alexander Watson
Cost$38,000 [4] [5]
Laid downDecember, 1889 at Revelstoke, BC
Maiden voyageJuly 2, 1890
In service1890
Out of service1904
IdentificationCAN 94905
FateScrapped
General characteristics
Typeinland shallow-draft boat passenger/freighter
Tonnage452 gross; 285 net
Length131 ft (40 m)
Beam25.5 ft (8 m)
Depth4.8 ft (1 m) depth of hold
Installed powertwin steam engines manufactured by Albion Iron Works of Victoria, British Columbia, twin single-cylinder, horizontally mounted, 16" bore by 54" stroke, 16 hp (12 kW) nominal
Propulsionsternwheel
Speed12.3 miles per hour average (varied greatly depending on river currents)

Lytton was a sternwheel steamboat that ran on the Arrow Lakes and the Columbia River in southeastern British Columbia and northeastern Washington from 1890 to 1904.

Contents

Design and construction

Lytton was built at Revelstoke, British Columbia. She was the first vessel constructed for the newly formed Columbia and Kootenay Steam Navigation Company. Construction began in December 1889, but winter ice conditions forced a suspension of work until April 1890. Alexander Watson, a veteran shipbuilder, supervised the construction, for which he had recruited a crew of carpenters from Victoria, British Columbia. The engines for Lytton were second-hand, coming from the steamer Gertrude which ran on the Stikine and lower Fraser rivers from 1875 to 1887. [1] [2]

Lytton was a typical Columbia River steamer. She had three decks, the first one being reserved for freight, machinery and crew quarters, the second for passengers, including cabins and an observation saloon. Down the center of the passenger deck was a dining room with raised clerestory windows At the front of the top deck was placed the pilot house. Just behind the pilot house was a small structure called the "texas", which contained cabins for the officers. Behind the texas was the vessel's single funnel, and on the front of the funnel was the steamer's whistle.[ citation needed ] In the case of Lytton, the funnel flared out in cone near the top, and may have been fitted with a spark arrestor. This detail was somewhat unusual and allows Lytton to be more readily identified in photographs of the period. The foredeck was open, and was often heavily loaded with cordwood fuel or cargo.[ citation needed ]

Lytton was designed to be a shallow draft vessel to allow her to negotiate rapids and other areas of low water. With no cargo on board, Lytton drew only 19 inches (480 mm) of water. When fully loaded with approximately 60 tons of cargo, the draft increased to 2 feet 6 inches (0.76 m) The flat shallow draft hull was kept in shape by "hog chains" carried on large posts which, tuned by turnbuckles, supported the hull much like a bridge truss.

Operations

First voyage down the river and the lakes

Capt. Frank Odlin took Lytton out of Revelstoke for her first commercial trip in early July 1890. Lytton was not a large or luxurious vessel even compared to other steamboats of the time. However, for Revelstoke, Lytton, the first significant steam vessel built in the town, was big news. Historian Downs, relying on accounts of the day described Lytton's departure on her first voyage, leaving Revelstoke:

[with 'hearty good wishes and ... waving of handkerchiefs.' At midnight ' a grand display of thunder and lightning ... greeted the steamboat, whose well-tinned and painted decks shed the water like a canvasback. [6]

The downriver voyage began on July 2, 1890 at the dock near where the new large bridge of the Canadian Pacific Railway crossed the Columbia River. Lytton then steamed over to the Revelstoke smelter dock, where 65 tons of steel rails, fishplates and other track building supplies were loaded on board. [2]

The destination for these rail supplies was far down the lakes at Sproats Landing, BC or modern day Castlegar, where the Kootenay River joins the Columbia. The CPR was building a portage railway from Nelson to Trail to allow it to access the mines in those towns and trans-ship ore and supplies from that train to the lake steamers enabling the freight to be moved one hundred miles north over the lake to the CPR port and dock at Arrowhead where a branch line stopped. The Kootenay River connected to the Nelson Arm of Kootenay Lake. The Kootenay river could not be navigated from the Columbia through to the Nelson Arm, as it was blocked by Bonnington Falls. In place of steamboat navigation, in the early 1890s a railroad, the Columbia and Kootenay was being built along the Kootenay River from Sproats Landing on the Columbia eastward to Nelson on Kootenay Lake. [2]

Once the rail supplies were loaded, the trip down the Columbia and the lakes began on July 3, 1890 at 11:30 a.m., as crowds cheered on the dock and the nearby steamer Kootenai. Three of the principals of the Columbia and Kootenay Steam Navigation had supplied most of the money for the construction of the Lytton and two of them, J. A. Mara and Frank Barnard were on board for the steamer's first trip. [2]

Revelstoke was 28 miles (45 km) up the Columbia River from the head of the upper Arrow Lake. On her first trip, Lytton took three hours to cover this distance, reaching the upper lake at 2:30 in the afternoon of July 3. This was still considered good time, as the steamer had encountered mechanical problems on the way down, forcing the vessel to stop. This was not surprising for a first run, and her actual steaming speed while underway had been 14 miles (23 km) an hour, which was helped by the swift flowing current in the river, ranging between 3 and 7 miles per hour. [2]

Lytton at Sproats Landing, BC, on lower Arrow Lake Lytton sternwheeler at Sproats Landing BC.jpg
Lytton at Sproats Landing, BC, on lower Arrow Lake

Upper Arrow Lake opened up wide and deep after the Columbia River, and Lytton traversed the entire lake by 6:30 p.m. on the evening of July 3. After this point came the Narrows, a 16-mile (26 km) stretch of shallow water which lay between the upper and lower Arrow Lakes. After a stop for fuel (called "wooding up"), Lytton passed through the Narrows, reaching the head of the lower lake at 8:10 p.m. The vessel continued steaming down the lake into the night, reaching Sproat's Landing five and one-half hours later. Lytton's actual steaming time subtracting delays was 12.33 miles per hour, and was considered good speed. On the return trip up the river and the lakes, Lytton covered the entire 150 miles (240 km) back to Revelstoke in 13.75 hours, for an average speed of 11 miles per hour up river, also considered good. [2]

Connection between transcontinental rail lines

On August 15, 1890, a railroad, the Spokane Falls and Northern been built up to Northport, then called Little Dalles (not to be confused with the other Little Dalles north of Revelstoke.) This railroad connected with the Northern Pacific and there would shortly be a link to the Great Northern at Spokane. There were however no rail links in the Kootenay region between these transcontinental lines and the Canadian Pacific Railway, and steamers on the Arrow Lakes, including the Lytton were for a time the only connections between the railhead at Northport and the C.P.R. 150 miles (240 km) north at Revelstoke. From 1890 to 1897, Lytton was operated on the Arrow Lakes route between Revelstroke and Northport, Washington, although the northern terminus changed to Wigwam, BC as the C.P.R. built an extension south down the eastern bank of the Columbia north of upper Arrow Lake. [2]

Mining boom transport

W.P. Short, an early captain of Lytton W P Short (steamboat captain).jpg
W.P. Short, an early captain of Lytton

This became especially important when in the same month that mountains that Lytton was taken on her first voyage, the fabulous Le Roi mining claim was staked at Red Mountain near Trail, B.C. Over 6 million tons of lead/zinc/tin and gold ore were taken out of the claim, worth more than $125 million. One stakeholder bought his stake for $12.50 and sold it for $30,000. The resulting ore boom created a demand for steamboat and rail transportation to the mines near Trail and other parts of the Kootenay mountains. Lytton became part of the ore boom, hauling ore barges to the smelter at Trail. [4]

Runs up to Dalles des Morts (Death Rapids) on the Columbia

Lytton at Arrowhead, BC on upper Arrow Lake Lytton sternwheeler at Arrowhead BC.jpg
Lytton at Arrowhead, BC on upper Arrow Lake

From 1897 to 1901, when the water was high enough Lytton was worked on the Columbia above Revelstoke to La Porte, which was at a place called Dalles des Morts, or in English, Death Rapids. Lytton was the first steamboat to work the Columbia River above Revelstoke after the Forty-Nine in the 1860s and 1870s. One difficult stretch of water, called the Little Dalles, took Lytton six hours to work through upriver. Coming down, the run was timed with a stopwatch, and took only 6 minutes and 51 seconds. [1] [4]

Ferry operations on lower Arrow Lake

From 1898 to 1902 functioned as a ferry and towboat on the south end of lower Arrow Lake between Robson, BC and Robson West. This involved pushing barges across the lake loaded with rail cars and engines run out onto tracks mounted on the barges, and supported the work being done to extend the Columbia and Kootenay Railway westward from Castlegar, BC to Grand Forks and Midway. Lytton continued in ferry service until replaced by a bridge in March 1902. [1] [2]

Dismantled

Historian Affleck summed up Lytton as "a very hard working, profitable vessel." [7] Lytton lasted over ten years, which was a long time for a heavily-worked wooden steamboat on frontier river. After the end of her service life, Lytton was beached above Robson. In 1904, Lytton was dismantled. Some houses in Burton, BC were constructed with materials from the vessel's hull. [1] [2] [4]

See also

Notes

  1. 1 2 3 4 5 Affleck, Edward L., A Century of Paddlewheelers in the Pacific Northwest, the Yukon, and Alaska, at 18 and 52, Alexander Nicholls Press, Vancouver, BC 2000 ISBN   0-920034-08-X
  2. 1 2 3 4 5 6 7 8 9 10 Turner, Robert D., Sternwheelers and Steam Tugs -- An Illustrated History of the Canadian Pacific Railway's British Columbia Lake and River Service, at 4, 6, 7, 8, 9-13, 17, 18, 19, 27-29, 49, 61, 63, 107, 117, 118, 119, 122, Sono Nis Press, Victoria, BC 1984 ISBN   0-919203-15-9
  3. Newell, Gordon R. ed., H.W. McCurdy Marine History of the Pacific Northwest, Superior Publishing, Seattle, WA 1966
  4. 1 2 3 4 5 Downs, Art, Paddlewheels on the Frontier -- The Story of British Columbia and Yukon River Sternwheel Steamers, 117-118, 122-123, 125, 128, Superior Publishing, Seattle, WA 1972
  5. Affleck gives cost of steamer as $20,941; Turner and Downs give $38,000
  6. Downs, at 117. Downs is probably quoting the Kootenay Star, also relied on by Turner.
  7. Affleck, at 18

Further reading

Related Research Articles

<i>Bonnington</i> (sternwheeler)

Bonnington was a sternwheel steamboat that ran on the Arrow Lakes in British Columbia from 1911 to 1931. Bonnington and two sisterships were the largest sternwheelers ever built in British Columbia. Bonnington was partially dismantled in the 1950s, and later sank, making the vessel the largest freshwater wreck site in British Columbia.

Steamboats of the Arrow Lakes

The era of steamboats on the Arrow Lakes and adjoining reaches of the Columbia River is long-gone but was an important part of the history of the West Kootenay and Columbia Country regions of British Columbia. The Arrow Lakes are formed by the Columbia River in southeastern British Columbia. Steamboats were employed on both sides of the border in the upper reaches of the Columbia, linking port-towns on either side of the border, and sometimes boats would be built in one country and operated in the other. Tributaries of the Columbia include the Kootenay River which rises in Canada, then flows south into the United States, then bends north again back into Canada, where it widens into Kootenay Lake. As with the Arrow Lakes, steamboats once operated on the Kootenay River and Kootenay Lake.

Robson is an unincorporated community in the West Kootenay region of southeastern British Columbia. The former steamboat landing and railway terminal is on the northeast side of the Columbia River. The residential area is off Broadwater Road, within the northwest part of Greater Castlegar.

<i>Rossland</i> (sternwheeler)

The Rossland was a sternwheel steamboat that ran on the Arrow Lakes in British Columbia. It was named after Rossland, British Columbia, once a prosperous mining town in the region.

<i>Minto</i> (sternwheeler)

Minto was a sternwheel steamboat that ran on the Arrow Lakes in British Columbia from 1898 to 1954. In those years of service, Minto had steamed over 3.2 million kilometers serving the small communities on Arrow Lakes. Minto and her sister Moyie were the last sternwheelers to run in regularly scheduled passenger service in the Pacific Northwest. The "Minto" class of sailing dinghies is named after this vessel.

<i>Kootenai</i> (sternwheeler) Sternwheel steamboat

Kootenai was a sternwheel steamboat that ran on the Arrow Lakes in British Columbia from 1885 to 1895. Kootenai was the second sternwheeler to run on the Arrow Lakes. This vessel should not be confused with the similarly named Kootenay, an 1897 sternwheeler that also ran on the Arrow Lakes.

<i>Columbia</i> (Arrow Lakes sternwheeler)

Columbia was a sternwheel steamboat that ran on the Arrow Lakes in British Columbia from 1891 to 1894. Columbia should be distinguished from the many other vessels with the same or similar names, including in particular the propeller-driven steamboat Columbia that ran on the Arrow Lakes for many years.

<i>Nakusp</i> (sternwheeler)

The Nakusp was a sternwheel steamboat that operated from 1895 to 1897 on the Arrow Lakes of British Columbia.

<i>North Star</i> (sternwheeler 1897) Sternwheel steamer that operated in western Montana and southeastern British Columbia on the Kootenay and Columbia rivers from 1897 to 1903

North Star was a sternwheel steamer that operated in western Montana and southeastern British Columbia on the Kootenay and Columbia rivers from 1897 to 1903. The vessel should not be confused with other steamers of the same name, some of which were similarly designed and operated in British Columbia and the U.S. state of Washington.

<i>Gwendoline</i> (sternwheeler) Sternwheel steamer that operated on the Kootenay River in British Columbia and northwestern Montana from 1893 to 1899

Gwendoline was a sternwheel steamer that operated on the Kootenay River in British Columbia and northwestern Montana from 1893 to 1899. The vessel was also operated briefly on the Columbia River in the Columbia Valley.

<i>Marion</i> (sternwheeler)

Marion was a small sternwheel steamboat that operated in several waterways in inland British Columbia from 1888 to 1901.

Annerly

Annerly was a sternwheel steamboat that operated on the upper Kootenay River in British Columbia and northwestern Montana from 1892 to 1896.

<i>Pert</i> (sidewheeler)

Pert was a sidewheel steamboat that operated in British Columbia on the Columbia River from 1887 to 1905, often transporting large loads of timber. Pert was also known as Alert and City of Windermere at times.

James D. Miller

James D. Miller was a steamboat captain in the Pacific Northwest from 1851 to 1903. He became well known for his long length of service, the large number of vessels he commanded, and the many different geographical areas in which he served.

Frank P. Armstrong Steamboat captain

Francis Patrick Armstrong was a steamboat captain in the East Kootenay region of British Columbia. He also operated steamboats on the Kootenay River in Montana and on the Stikine River in western British Columbia. Steam navigation in the Rocky Mountain Trench which runs through the East Kootenay region was closely linked to Armstrong's personality and career. In addition to being a steamboat captain, Armstrong was also a prospector, white-water boat pilot and guide in the Big Bend country of the Columbia River.

Steamboats of the upper Columbia and Kootenay Rivers Overview of the steamboats of the upper Columbia and Kootenay Rivers

From 1886 to 1920, steamboats ran on the upper reaches of the Columbia and Kootenay in the Rocky Mountain Trench, in western North America. The circumstances of the rivers in the area, and the construction of transcontinental railways across the trench from east to west made steamboat navigation possible.

<i>Charles R. Spencer</i>

Charles R. Spencer was a steamboat built in 1901 to run on the Willamette and Columbia rivers from Portland, to The Dalles, Oregon. This vessel was described as an "elegant passenger boat". After 1911 this vessel was rebuilt and renamed Monarch.

<i>Kuskanook</i>

Kuskanook was a wooden, stern-wheel driven steamboat that operated on Kootenay Lake, in British Columbia from 1906 to 1931. After being taken out of service, Kuskanook was sold for use as a floating hotel, finally sinking in 1936. The vessel name is also seen spelled Kooskanook.

<i>International</i> (sternwheeler)

International was a stern-wheel driven steam boat that operated on Kootenay Lake in British Columbia from 1896 to 1908. International was owned by a Canadian subsidiary of the Great Northern Railway and was involved in sharp competition, including steamboat racing, with similar vessels owned by the Canadian Pacific Railway.

<i>Nasookin</i>

Nasookin was a sternwheel-driven steamboat that operated on Kootenay Lake in British Columbia from 1913 to 1947. Nasookin was one of the largest inland steam vessels ever to operate in British Columbia and the Columbia River and its tributaries. Nasookin became surplus to its original owner, the Canadian Pacific Railway, and was transferred to the British Columbia Provincial government which used it as an auto ferry until 1947. Negligent mooring of the steamer in 1948 led to irreparable damage to its hull, and it was later scrapped. Portions of the upper works were salvaged and used as a house.