Cutch (steamship)

Last updated

Cutch (steamship) circa 1895.jpg
Cutch in Canadian service before 1898.
History
NameCutch
Routecoastal British Columbia
In service1884
IdentificationCanada registry #100202; US registry 77526; flag signal K.R.Q.S.
FateTransferred to Colombia, renamed Bogota
General characteristics
TypeCoastal steamship
Tonnageas built : 324 gross tons; rebuilt: 676 gross tons
Length180 ft (54.9 m)
Beam23 ft (7.0 m)
Depth12 ft (3.7 m) depth of hold
Installed powerdouble expansion steam engine, coal-fired boiler.
Sail planauxiliary schooner
Speed12 miles per hour nominal
Capacity1890: 150 pass.; 1898: 210 pass.

Cutch was a steamship built in 1884 in Hull, England. The ship served as a pilgrimage vessel and a yacht in India from 1884 to 1890, then as a steamship in British Columbia from 1890 to 1900 under the ownership of the Union Steamship Company. The ship was wrecked in August 1900, then salvaged and registered in the United States as Jessie Banning. In 1902 the ship was transferred to the navy of Colombia where it was armed with cannon and served in the Colombian navy as the gunboat Bogota. Bogota shelled the city of Panama on November 3, 1903 during the secession of Panama from Colombia.

Contents

Design and construction

Cutch was built in 1884 in Hull, England by the firm of James Brunner & Co. [1] Cutch was built to the order of Jumabhoy Lolljee, of Bombay to be used to carry people on religious pilgrimages. This required a high speed. On July 1, 1884 the ship was taken on the trial run on July 1 this vessel went for her trial trip at Withernsea, at the Humber Estuary. Trial speeds of over 12 knots were obtained over a measured mile. [2] As built, Cutch was 180 feet long, with a beam of 23 feet and 12-foot depth of hold. Overall size of the ship as built was 324 gross tons. The hull was iron. [1]

The original power plant was a double-expansion steam engine, with high-pressure cylinder 25 inches in diameter, low-pressure of 48-inch diameter, and a stroke of 30 inches, and drove the ship, at least nominally, at 12 miles per hour. Coal consumption was 12 tons in 24 hours. [3] [4] Boiler pressure was 100 pounds of steam and the engine turned 92 revolutions per minute at top speed. [2]

Cutch had an auxiliary sailing rig as a schooner. [4] [5]

Transfer to Canada

In 1890, the Union Steamship Company bought the ship from the estate of the Maharajah of Cutch (India), who had been using it as a yacht. The ship was brought from India to British Columbia under the command of Capt. William Webster, manager of the company. Cutch arrived in British Columbia in June 1890. [1] Cutch was originally licensed in Canada to carry 150 passengers. [4]

Operation

Cutch in 1898 following reconstruction Cutch (steamship) in 1898.jpg
Cutch in 1898 following reconstruction

From 1892 to 1896, Cutch was used on the route from Vancouver to Nanaimo, British Columbia, stopping en route at Steveston. [5] Cutch carried passengers for the Canadian Pacific Railway, which had rail terminals at both Vancouver and Nanaimo, but which had not then entered into the steamship business. [1]

Cutch was rebuilt in 1898, with new machinery and cabins for 60 additional passengers. The overall size of the vessel was more than doubled, from 324 to 676 gross tons. [3] In 1898 and 1899, Union Steamship Company placed Cutch and two other steamships on the run north on the Inside Passage to Skagway and Dyea, Alaska. [6]

Cutch was wrecked on August 24, 1900, in Stephens Passage, Alaska. The vessel was sold for salvage and then towed to Portland, Oregon. In 1901 the ship was registered in the United States under the name Jessie Banning and given US registry number 77526. Dimensions of the vessel according to the US registry were 175.3 feet in length, beam of 23.6 feet, and 11.7-foot depth of hold. Overall size of the ship as listed on the US registry was 639 gross tons and 267 registered tons. As Jessie Banning the ship operated out of Seattle, Washington as a homeport. [7]

Transfer to Colombia

In 1902, the vessel was transferred to Colombia under the name Bogota. [3] The ship was placed in service with the navy of Colombia and was their most powerful vessel on the Pacific Coast. The ship was armed with one 14-pounder gun, eight rapid fire 6-pounder cannon, and two Vickers-Maxim machine guns. In theory the ship was still capable of moving at 12 miles per hour, although the state the machinery generally did not allow a speed of greater than 9 miles per hour. [8]

On November 3, 1903, in the course of the secession of Panama from Colombia (an event linked to the construction of the Panama Canal, Bogota fired several shells into the city of Panama, killing one resident of the city. [9]

Notes

  1. 1 2 3 4 Newell, ed., McCurdy Marine History, at page 78.
  2. 1 2 Marine engineer and naval architect, Volumes 5-6, (August 1, 1884), page 139. (accessed 06-19-11).
  3. 1 2 3 The New Mills' List, “Registered Canadian Steamships 1817-1930 over 75 feet” Archived October 3, 2011, at the Wayback Machine (accessed 06-17-11).
  4. 1 2 3 E.W. Wright. Lewis Dryden's marine history of the Pacific Northwest. Lewis & Dryden. pp. 376–377. ISBN   978-5-88401-319-3.
  5. 1 2 Steveston Museum, Richmond, BC (accessed 06-18-11).
  6. Newell, ed., McCurdy Marine History, at pages 37 and 46.
  7. U.S. Dept. of the Treasury, Bureau of Statistics, Annual List of Merchant Vessels of the United States (for year ending June 30, 1902). (accessed 06-19-11).
  8. Dutton, Arthur H., “The Colombian Army and Navy”, Overland Monthly, Volume 44, San Francisco, CA (July-December 1904), page 150 (accessed 06-19-11).
  9. McCain, William David, The United States and the Republic of Panama, page 16. (accessed 06-19-11).

Related Research Articles

Union Steamship Company of British Columbia Pioneer firm on coastal British Columbia

The Union Steamship Company of British Columbia was a pioneer firm on coastal British Columbia. It was founded in November 1889 by John Darling, a director of the Union Steamship Company of New Zealand, and nine local businessmen. The company began by offering local service on Burrard Inlet near Vancouver and later expanded to servicing the entire British Columbia coast.

<i>Ramona</i> (1892 sternwheeler)

The river sternwheeler Ramona operated from 1892 to 1908 on the Willamette River in Oregon, on the Stikine River running from Wrangell, Alaska into British Columbia, and the Fraser River, in British Columbia. This vessel should not be confused with the coastal steamship Ramona which also ran in Alaskan waters.

<i>Alice Gertrude</i>

Alice Gertrude was a wooden steamship which operated on the Strait of Juan de Fuca and Puget Sound from 1898 to January 1907, when she was wrecked at Clallam Bay in Washington.

<i>General Miles</i>

General Miles was a steamship constructed in 1882 which served in various coastal areas of the states of Oregon and Washington, as well as British Columbia and the territory of Alaska. It was apparently named after US General Nelson A. Miles.

<i>Sioux</i> (steamship)

Sioux was a steamship which was operated on Puget Sound and the Strait of Juan de Fuca from 1912 to 1941. From 1924 to 1941, following reconstruction, the vessel operated as an auto ferry under the name Olympic. During the Second World War (1941-1945) this vessel was taken under the control of the U.S. Army and renamed the Franklin R. Leisenburg. The Liesenburg served as a ferry in the Panama Canal area under Army control, and then was sold to a firm which ran the vessel on the Surinam river in South America.

Pier 2, Seattle

Pier 2 in Seattle, Washington was an important shipping terminal.

<i>Atlanta</i> (1908 steamboat)

Atlanta was a steamboat built in 1908 at Houghton, Washington which served on Lake Washington and Puget Sound until 1938, when it was converted into a diesel-powered houseboat.

<i>Speeder</i> (motor vessel)

Speeder was a motor launch built in 1908 which served on Puget Sound and in the San Juan Islands. From 1908 to 1922 this vessel was named Bainbridge.

<i>Lotus</i> (motor vessel) Houseboat yacht

Lotus is a motor yacht, launched in 1909 in Seattle, Washington. Lotus was employed as a pleasure vessel on Puget Sound, and in the waters of British Columbia and southeastern Alaska. Lotus was of a unique design and is now on the National Register of Historic Places.

<i>Comox</i> (steamboat)

Comox was a steamship built in 1891 in British Columbia which served until 1920. Comox was the first steel ship built on the west coast of North America north of San Francisco.

<i>Lady Alexandra</i>

Lady Alexandra was a steamship built in 1924 in Montrose, Scotland which served in British Columbia from 1924 to 1952, mostly on Howe Sound.

<i>Cheslakee</i>

Cheslakee was a steamship that operated from 1910 to 1913 under the ownership of the Union Steamship Company of British Columbia. In 1913, the ship sank, killing seven people. This was the only accident involving a passenger fatality in the 70-year history (1889-1959) of the Union Steamship Company. Following the sinking Cheslakee was raised, reconstructed, and launched again under a different name.

<i>Cowichan</i> (steamship)

Cowichan was a steamship which was operated in British Columbia under the ownership of the Union Steamship Company. Cowichan sank in 1925 following a collision with another ship.

SS <i>Princess Beatrice</i>

Princess Beatrice was a steamship built for and owned by the marine division of the Canadian Pacific Railway. The ship served from 1903 to 1928 in the coastal waters of British Columbia. The ship also operated on Puget Sound on a route from Victoria, British Columbia to Seattle, Washington. Princess Beatrice was the first ship to operate in the year-round steamship service between Seattle and Victoria that was run by CPR from 1904 to 1959. This ship should not be confused with an earlier Princess Beatrice, built in Scotland in 1874, which served on the Atlantic coast of Canada.

<i>Princess Louise</i> (sidewheeler)

Princess Louise was a sidewheel steamboat built in 1869. From 1869 to 1879 this ship was named Olympia. In 1879 the name was changed to Princess Louise, after Princess Louise, Duchess of Argyll, a daughter of Queen Victoria who was married to Marquess of Lorne (1845-1914), Governor General of Canada from 1878 to 1883. Princess Louise was the last sidewheeler to be operated commercially on the coast of British Columbia.

<i>Cheakamus</i> (steamship)

Cheakamus was a steamship built in 1913 in North Vancouver, British Columbia. This ship was originally built as the Cheslakee in Scotland. After Cheslakee capsized in 1913, the hulk was raised, lengthened, and placed back into service as Cheakamus.

<i>Chasina</i>

Chasina was an iron-hulled, steam-powered ship, originally built as a steam yacht, but later converted to a passenger-freighter vessel that served in coastal British Columbia and other areas during the early decades of the 1900s under the ownership several different companies. The ship disappeared in 1931 after leaving Hong Kong.

<i>Aquilo</i> (steam yacht)

Aquilo was a steam yacht which was built in Boston in 1901 for William Phelps Eno, a wealthy man who was the inventor of the stop sign. In 1910, Eno sold Aquilo and the yacht was brought to the west coast of North America, where it was operated principally in Puget Sound and coastal British Columbia. Aquilo had a long succession of wealthy owners. In 1966, the yacht caught fire and sank while en route from Seattle to Los Angeles.

<i>Arcadia</i> (steamboat)

The steamboat Arcadia, built in 1929, was one of the last commercial steamboats placed into service on Puget Sound. The vessel later served as a prison tender under the name J.E. Overlade, and after that, as Virginia VI, as an excursion vessel.

Callendar Navigation Company

The Callendar Navigation Company, sometimes seen as the Callendar Transportation Company, started in business in the early 1900s. Callendar was formed in the early 1900s, and was based in Astoria, Oregon. Callender was to become one of six large towing companies of the Columbia and Willamette rivers in the early decades of the 1900s, the others being Shaver Transportation, Smith Transportation, Hosford, Knappton Towing Co., and Willamette and Columbia River Towing Co. In 1922, Callendar Navigation merged with Knappton Towboat Co., which existed, with a name change in 1990, and which became part of Foss Marine in 1993.

References

Further reading