Leschi circa 1915 on Lake Washington. | |
History | |
---|---|
Name | Leschi |
Owner | Seattle Port Commission, others. |
Builder | J. F. Duthie & Company. |
Launched | December 6, 1913 |
In service | 1913 |
Out of service | 1986 |
Identification | US registry #11875 |
Fate | Capsized. |
General characteristics | |
Type | steam and motor ferry, later a cannery vessel |
Tonnage | 433 gross; 272 registered |
Length | 169 ft (51.51 m) |
Beam | 33 ft (10.06 m) |
Depth | 8.3 ft (2.53 m) depth of hold |
Installed power | as built: steam engines, 700 hp (520 kW); converted to 500 hp (370 kW) diesel in 1931. |
Propulsion | originally sidewheels; rebuilt as propeller in 1931. |
Speed | 14 kn (25.93 km/h)to 15 kn (27.78 km/h) |
Capacity | 400 passengers, 40 automobiles |
Crew | eight (8) |
Leschi was a steam ferry that operated on Lake Washington from 1913 to 1950, and afterwards on Puget Sound until 1967. From 1969 to 1986 the vessel was a floating cannery in Alaska.
The first ship ever commissioned by the Seattle Port Commission, and the first automobile ferry in Western Washington, [1] Leschi was originally built as a side-wheel ferry by the Seattle firm of J. F. Duthie & Company. The paddle wheels were designed to give less water resistance by "feathering" which allowed the vessel to move faster through the water. [2]
The steel hull was built on the East Waterway of the Duwamish River. Once the hull was complete, it was disassembled and transported to Rainier Beach on Lake Washington. Once there, the hull was reassembled by J.F Dulthie, the machinery was installed, and the upper works (these were of wood) were constructed. The ferry was launched on December 6, 1913. Conducting the christening was Eleanor Chittenden, daughter of the well-known Army engineer Hiram M. Chittenden (1858–1917), chairman of the Port Commission, who spoke at the ceremony. [2]
In 1931 Leschi was rebuilt. The sidewheelers were removed and the ferry was converted to propeller drive. The steam engine was replaced by a 500 horsepower (370 kW) diesel. [2] This increased the speed from 8 kn (14.82 km/h)to 12 kn (22.22 km/h). [3] Later in 1931 the ferry was renamed the Ballard and placed on the Ballard to Suquamish run. [4] Leschi continued to operate on Lake Washington even after the completion of the first floating bridge across the lake in 1940.
In 1948, Leschi was the last ferry operating on Lake Washington. Mrs. J.L. Anderson, the widow of Capt. John L. Anderson (1868–1941), was operating the vessel at that time. The city of Kirkland then took over operation of the ferry, with King County maintaining the two terminals at Madison Park and Kirkland.
Leschi remained in service on Lake Washington until 1950. The ferry was then transferred to the Vashon – Fauntleroy and the Mukilteo ferry routes. [2] [5] In 1951 the then new Washington State Ferry system purchased Leschi. [5]
In 1967, Leschi was sold to Cape St. Elias Ocean Products Company. In 1969, at a cost of $200,000, Leschi was refitted at the Ballard Marine Center to serve as a cannery. The vessel then was transferred to Alaska where it was operated as floating salmon and crab cannery off Cordova and Valdez until 1986 when near Whittier the vessel capsized. [2] [6]
Lake Washington steamboats and ferries operated from about 1875 to 1951, transporting passengers, vehicles and freight across Lake Washington, a large lake to the east of Seattle, Washington. Before modern highways and bridges were built, the only means of crossing the lake, other than the traditional canoe or rowboat, was by steamboat, and, later, by ferry. While there was no easily navigable connection to Puget Sound, the Lake Washington Ship Canal now connects Lake Washington to Lake Union, and from there Puget Sound is reached by way of the Hiram M. Chittenden Locks.
The steamboat Fortuna was a vessel that operated on Lake Washington in the first part of the 20th century.
The steamboat Defiance operated in the early 1900s as part of the Puget Sound Mosquito Fleet. In later years this vessel was called Kingston.
The Seattle–Bremerton ferry is a ferry route across Puget Sound between Seattle and Bremerton, Washington. Since 1951, the route has primarily been operated by the state-run Washington State Ferries system, currently the largest ferry system in the United States. Kitsap Transit also runs passenger-only "fast ferries" service on the route.
Hyak was a wooden-hulled steamship that operated on Puget Sound from 1909 to 1941. This vessel should not be confused with the sternwheeler Hyak which ran on the extreme upper reach of the Columbia River at about the same time. The name means "swift" or "fast" in the Chinook Jargon.
Lady of the Lake was a wooden steamboat that operated on Puget Sound from 1897 to 1903. Following a fire in 1903, the vessel was rebuilt as the tug Ruth.
The City of Seattle was a side-wheel driven steam-powered ferry built in 1888. This vessel was the first ferry to operate on Puget Sound. City of Seattle was also used in the San Francisco Bay area starting in 1913. The ferry was known as YFB54 when owned by the U.S. navy in World War II, and as Magdalena during naval service and for a time following the war. The upper works of the ferry have been mounted on a barge hull, and are now in use as a houseboat in Sausalito, California.
West Seattle was a side-wheel driven steam-powered ferry built in 1907.
Issaquah was a steam ferry built in 1914 that operated on Lake Washington and in San Francisco Bay.
City of Mukilteo was a steam ferry built in 1927 which served on Puget Sound until April 1932, when the ferry was destroyed by fire.
City of Clinton was a small steam ferry built in 1922 which served on Puget Sound until March 23, 1929, when the vessel caught fire and sank near the city of Mukilteo, Washington, USA.
King County was a steam ferry built in 1900 which served on Lake Washington until 1908.
C.C. Calkins was a small steamboat built in 1890 which served on Lake Washington.
Kirkland was a sidewheel steamboat that ran on Lake Washington from 1888 to 1898.
Atlanta was a steamboat built in 1908 at Houghton, Washington which served on Lake Washington and Puget Sound until 1938, when it was converted into a diesel-powered houseboat.
Speeder was a motor launch built in 1908 which served on Puget Sound and in the San Juan Islands. From 1908 to 1922 this vessel was named Bainbridge.
Princess Beatrice was a steamship built for and owned by the marine division of the Canadian Pacific Railway (CPR). The ship served from 1903 to 1928 in the coastal waters of British Columbia. The ship also operated on Puget Sound on a route from Victoria, British Columbia to Seattle, Washington. Princess Beatrice was the first ship to operate in the year-round steamship service between Seattle and Victoria that was run by CPR from 1904 to 1959. This ship should not be confused with an earlier Princess Beatrice, built in Scotland in 1874, which served on the Atlantic coast of Canada.
The steamboat Acme operated on Lake Washington and also on the Sammamish Slough to Bothell, Washington from 1899 to 1910, when it was destroyed by fire.
Falcon was a 26 registered ton gasoline-powered launch built in Bellingham, Washington in 1909. She operated in Puget Sound and nearby regions, and also on Lake Washington during the first part of the 1900s. The wreck of this vessel has been discovered in Lake Washington not far from Kirkland and is in good condition under 190 feet (58 m) of water. This vessel should not be confused with the steam tug Falcon built in Tacoma, Washington in 1902.