Sioux as shown on an old postcard. | |
History | |
---|---|
Name | Sioux later Olympic and Franklin R. Leisenburg |
Owner | Puget Sound Navigation Co., U.S. Army, others |
Route | Puget Sound, Strait of Juan de Fuca |
Builder | The Moran Company |
Completed | 1911 |
Identification | US registry #208278 |
General characteristics | |
Type | coastal steamship and ferry |
Tonnage | as built : 466 gross tons, 266 regist. tons |
Length | 148.3 ft (45.20 m) |
Beam | 24.2 ft (7.38 m) |
Depth | 14.8 ft (4.51 m) depth of hold |
Installed power | compound steam engine; four cylinders, 14 in (35.6 cm), 22 in (55.9 cm)and two 26 in (66.0 cm); stroke 20 in (50.8 cm), 1,400 hp (1,000 kW) |
Speed | 16 knots (following 1924 rebuild) |
Sioux was a steamship which was operated on Puget Sound and the Strait of Juan de Fuca from 1912 to 1941. From 1924 to 1941, following reconstruction, the vessel operated as an auto ferry under the name Olympic. During the Second World War (1941-1945) this vessel was taken under the control of the U.S. Army and renamed the Franklin R. Leisenburg. The Liesenburg served as a ferry in the Panama Canal area under Army control, and then was sold to a firm which ran the vessel on the Surinam river in South America.
Following the loss of the nearly-new but wooden steamship Clallam in 1904, Joshua Green, president of the Puget Sound Navigation Company, owner of the Clallam and the dominant Puget Sound shipping concern, announced that the company would replace its wooden steamships with ones built of steel. As part of this effort, in 1910, the steel steamers Sioux and Kulshan. were built nearly simultaneously in Seattle by The Moran Company. Sol Duc was specifically designed for the Seattle – Tacoma. [1]
Dimensions for Sioux were 461 gross tons, length 148.3 ft (45.20 m) beam of 24.2 ft (7.38 m) and depth of hold of 14.8 ft (4.51 m). Power was supplied by a four-cylinder, compound steam engine, with cylinder bores sized14 in (35.6 cm), 22 in (55.9 cm)and two 26 in (66.0 cm); stroke 20 in (50.8 cm). Two oil-fired boilers produced steam at 250 pounds pressure, with whole power plant developing 1,400 horsepower (1,000 kW).
Originally Sioux was intended to be placed on the route from Seattle to Irondale, where an important ironworks had been established, and which had provided much of the steel for the construction of the vessel. In May 1911 Sioux was placed on the Irondale route but only ran until July 1911, when she was replaced by the City of Everett. The ironworks was in trouble financially and about to file bankruptcy, so the traffic on the route didn't appear to justify use of the new steamer. Instead, Sioux was placed on the route from Seattle to the new municipal dock at Tacoma, alternating with the Indianapolis so that a steamer left Seattle every two hours bound for Tacoma. [1]
Sioux was later placed on the Hood Canal route, running with the sternwheeler State of Washington for the rest of the summer of 1911. Afterwards the steamship's permanent route became Seattle-Edmonds-Everett. Sioux could make the run in two hours, not as fast as the Flyer, but still considered good time. [1] When the Lake Washington Ship Canal was completed, the Sioux was the first commercial vessel to pass through the locks during the opening ceremony on July 4, 1917. [1]
Sioux was involved in an accident at Everett on August 16, 1912, which as it was said, resulted in "seriously depleting the local mosquito fleet". [2] Steamships had no direct speed control from the bridge of the vessel. The captain signaled the engine room using a system of bells and dials called the engine room telegraph. Accidents could and did happen when engine telegraph signals were misinterpreted by the engine room. On this particular occasion, Sioux, coming in from Seattle, was approaching the Everett dock. From the bridge, Capt. William Thorton signaled the engine room for "half astern" to slow the vessel down. Instead the engine room gave him "half ahead" which caused the steamer to ram into the dock. Captain Thorton then signaled for "full astern". [1]
Another mistake was made and the Sioux went full ahead, smashing into the stern of the Camano, driving Camano forward into the 75 ft (22.86 m) gasoline launch Island Flyer which in turn struck another gasoline launch, the newly built Alverene. Island Flyer was sunk as a result and Alverene was seriously damaged. Camano then sank at the dock. The small launch Arrow was demolished and the steam launches Ranger and Daphne suffered lesser damage. [1] [3]
It turned out that an engine room assistant, known as an oiler had been left in charge of the telegraph. No one was killed although there was at least one close call. [1] The destruction showed the vulnerability of wooden-hulled steamers, one of the reasons why the Puget Sound Navigation Company switched to steel-hulled vessels.
In 1923, the Puget Sound Navigation Company decided to rebuild Sioux, then running the Seattle - Port Townsend route into an automobile ferry, and late in the year gave the reconstruction contract to the Todd Dry Dock corporation in Seattle. The reconstruction was completed in the first part of 1924. Sioux was renamed Olympic. [1]
Sioux, renamed Olympic was placed on the Victoria, British Columbia to Port Angeles, Washington route across the Strait of Juan de Fuca, departed from Seattle on Saturday, June 14, 1924, making her first run on June 15, 1924, under Capt. Louis Van Bogaert, Chief Officer Harry Carter, and Chief Engineer I. Terado. Olympic had been scheduled to depart on Friday the 13th, but company management felt this supposedly ill-omened date would create too much adverse comment, and postponed the departure by one day. [1]
Olympic is also reported to have been run on the Victoria, BC-Bellingham, Washington route. [4]
In 1941, the U.S. Army bought Olympic from the Puget Sound Navigation Company and rebuilt her for service in the Panama Canal area as the Franklin R. Leisenburg. After the war the vessel was sold to a firm in Dutch Guiana for service out of Paramaribo on the Surinam River. [1] As of the late 1950s the ship was reported to be still in operation on the Surinam river. [4]
The Puget Sound mosquito fleet was a multitude of private transportation companies running smaller passenger and freight boats on Puget Sound and nearby waterways and rivers. This large group of steamers and sternwheelers plied the waters of Puget Sound, stopping at every waterfront dock. The historical period defining the beginning and end of the mosquito fleet is ambiguous, but the peak of activity occurred between the First and Second World Wars.
Athlon was a typical passenger steamboat of the Puget Sound Mosquito Fleet.
The steamboat Dart operated in the early 1900s as part of the Puget Sound Mosquito Fleet.
The steamboat Monticello (2) operated in the early 1900s as part of the Puget Sound Mosquito Fleet. The vessel went through several reconstructions and remained in service until 1962, when she was lost in Alaska waters. Her later names were Penaco and Sea Venture. (This Puget Sound steamer should not be confused with the smaller Monticello, which also ran on Puget Sound, but was built in 1895 for Captain Z.J. Hatch of the Monticello Steamship Company.
The steamboat Clallam operated for about six months from July 1903 to January 1904 in Puget Sound and the Strait of Juan de Fuca. She was sunk in a storm on what should have been an ordinary voyage to Victoria, British Columbia.
The steamboat Rosalie operated from 1893 to 1918 as part of the Puget Sound Mosquito Fleet, also operating out of Victoria, B.C. In 1898, Rosalie went north with many other Puget Sound steamboats to join the Klondike Gold Rush.
Flyer was an American steamboat that served from 1891 to 1929 on Puget Sound. From 1918 until the end of her service, she was officially known as the Washington. The Flyer ran for millions of miles at high speed, more than any inland vessel in the world. This 1891 steamer Flyer should not be confused with the steamboat Flyer built on Lake Coeur d'Alene in 1905, although the Coeur d'Alene vessel was inspired both in design and name by the success of the Puget Sound ship.
Tacoma was a steamship that served from 1913 to 1938 on Puget Sound. Built of steel, Tacoma was known for being one of the fastest and best-designed vessels to operate on Puget Sound. Tacoma was particularly noted for high-speed service from 1913 to 1930 on the route between Tacoma and Seattle.
Hyak was a wooden-hulled steamship that operated on Puget Sound from 1909 to 1941. This vessel should not be confused with the sternwheeler Hyak which ran on the extreme upper reach of the Columbia River at about the same time. The name means "swift" or "fast" in the Chinook Jargon.
Florence K was a steamboat that was operated on Puget Sound from 1903. This vessel was later renamed Gloria and was rebuilt as a steam ferry and renamed Beeline.
Inland Flyer was a passenger steamboat that ran on Puget Sound from 1898 to 1916. From 1910 to 1916 this vessel was known as the Mohawk. The vessel is notable as the first steamer on Puget Sound to use oil fuel. Inland Flyer was one of the most famous vessels of the time on Puget Sound.
General Miles was a steamship constructed in 1882 which served in various coastal areas of the states of Oregon and Washington, as well as British Columbia and the territory of Alaska. It was apparently named after US General Nelson A. Miles.
The Seattle–Bainbridge ferry is a ferry route across Puget Sound between Seattle and Bainbridge Island, Washington. The route was called the Seattle–Winslow ferry before the city of Winslow annexed the rest of the island and changed its name. Since 1951 the only ferries employed on the route have belonged to the Washington state ferry system, currently the largest ferry system in the United States.
Kulshan was a steamship which operated on Puget Sound from 1910 until 1929. When built, Kulshan was one of a newer type of inland steamships constructed entirely of steel, and was then considered one of the finest vessels ever to operate on Puget Sound.
Potlatch was a steamship which was operated on Hood Canal from 1912 to 1917, on Puget Sound from 1917 to 1937, although the vessel was little used after 1917.
Sol Duc was a steamship which was operated on northern Puget Sound from 1912 to 1935, chiefly on a route connecting ports on the Olympic Peninsula with Seattle. During the Second World War (1941–1945) Sol Duc served as a barracks ship.
Camano was a steamboat built in 1906 at Coupeville, Washington which operated on Puget Sound from 1906 to 1917. Camano was later known as Tolo. As Tolo the vessel was sunk in 1917 as a result of a collision at sea. Four people died as a result.
Alverene was a gasoline launch built in 1912 which operated on northern Puget Sound and in the San Juan Islands.
Princess Beatrice was a steamship built for and owned by the marine division of the Canadian Pacific Railway (CPR). The ship served from 1903 to 1928 in the coastal waters of British Columbia. The ship also operated on Puget Sound on a route from Victoria, British Columbia to Seattle, Washington. Princess Beatrice was the first ship to operate in the year-round steamship service between Seattle and Victoria that was run by CPR from 1904 to 1959. This ship should not be confused with an earlier Princess Beatrice, built in Scotland in 1874, which served on the Atlantic coast of Canada.
Telegraph was a sternwheel-driven steamboat built in 1903 in Everett, Washington. Except for the summer of 1905, from 1903 to 1912, Telegraph served in Puget Sound, running mainly on the route from Seattle to Everett, and also from Seattle to Tacoma and Olympia, Washington.