Italian cruiser Caprera

Last updated

Italian cruiser Caprera.jpg
Caprera in 1895, shortly after entering service
History
Flag of Italy (1861-1946) crowned.svg Italy
NameCaprera
Namesake Caprera
Builder Cantiere navale fratelli Orlando , Livorno
Laid down27 July 1891
Launched6 May 1894
Commissioned12 December 1895
FateSold for scrap in May 1913
General characteristics
Class and type Partenope-class torpedo cruiser
DisplacementNormal: 833 long tons (846  t)
Length73.1 m (239 ft 10 in)
Beam8.22 m (27 ft)
Draft3.48 m (11 ft 5 in)
Installed power
Propulsion
Speed18.1 to 20.8 knots (33.5 to 38.5 km/h; 20.8 to 23.9 mph)
Range1,800 nautical miles (3,300 km; 2,100 mi) at 10 knots (19 km/h; 12 mph)
Complement96–121
Armament
Armor

Caprera was a torpedo cruiser of the Partenope class built for the Italian Regia Marina (Royal Navy) in the 1880s. She was built by the Cantiere navale fratelli Orlando shipyard; her keel was laid in July 1891, she was launched in May 1894, and was commissioned in December 1895. Her main armament were her five torpedo tubes, which were supported by a battery of eleven small-caliber guns. Caprera spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. She served in the Red Sea during the Italo-Turkish War of 1911–1912, where she conducted shore bombardments and blockaded Ottoman ports in the area. Caprera did not remain in service long after the war, being sold for scrap in May 1913.

Contents

Design

Plan and profile of the Partenope class Partenope-class cruiser plan and profile drawing.jpg
Plan and profile of the Partenope class

The Partenope-class cruisers were derivatives of the earlier, experimental Goito-class cruisers, themselves based on the preceding cruiser Tripoli. [1] The class marked a temporary shift toward the ideas of the Jeune École in Italian naval thinking. The doctrine emphasized the use of small, torpedo-armed craft to destroy expensive ironclads. [2]

Caprera was 73.1 meters (239 ft 10 in) long overall and had a beam of 8.22 m (27 ft) and an average draft of 3.48 m (11 ft 5 in). She displaced 833 long tons (846  t ) normally. The ship had a short forecastle deck that terminated at the conning tower. She had a crew of between 96 and 121 personnel. [3]

Her propulsion system consisted of a pair of horizontal triple-expansion steam engines, each driving a single screw propeller. Steam was supplied by four coal-fired locomotive boilers, which were vented through two widely spaced funnels. Specific figures for Caprera's engine performance have not survived, but the ships of her class had top speeds of 18.1 to 20.8 knots (33.5 to 38.5 km/h; 20.8 to 23.9 mph) at 3,884 to 4,422 indicated horsepower (2,896 to 3,297 kW). The ship had a cruising radius of about 1,800 nautical miles (3,300 km; 2,100 mi) at a speed of 10 knots (19 km/h; 12 mph). [3]

Caprera was armed with a main battery of two 120 mm (4.7 in) /40 guns, one placed on the forecastle and the other toward the stern. Close-range defense against torpedo boats was provided by a secondary battery of six 57 mm (2.2 in) /43 guns mounted singly. [lower-alpha 1] She was also equipped with three 37 mm (1.5 in) /20 guns in single mounts. Her primary offensive weapon was her five 450 mm (17.7 in) torpedo tubes. The ship was protected by an armored deck that was up to 1.6 in (41 mm) thick; her conning tower was armored with the same thickness of steel plate. [3]

Service history

Caprera was laid down at the Cantiere navale fratelli Orlando (Orlando Brothers' Shipyard) in Livorno on 27 July 1891, originally under the name Clio. She was renamed Caprera on 23 February 1893 and was launched on 6 May 1894, the last member of her class to enter the water. [3] After fitting-out work was completed, she underwent sea trials in mid-1895. While testing the engines with forced draft, the ship reached 17.75 knots (32.87 km/h; 20.43 mph). [4] The ship was commissioned into the fleet on 12 December 1895. [3] Upon entering service, Caprera was initially stationed in the 2nd Maritime Department, split between Taranto and Naples, along with most of the torpedo cruisers in the Italian fleet. These included her sister ships Partenope, Aretusa, Euridice, Iride, Minerva, and Urania, the four Goito-class cruisers, and Tripoli. [5] Shortly thereafter, she was transferred to Italian East Africa. She departed with the protected cruiser Etna in late December, passing through the Suez Canal on 30 December, along with a transport carrying a battalion of infantry. The rest of the Red Sea Squadron, which included the protected cruisers Dogali and Etruria, met Caprera and Etna in Massawa. [6]

Caprera joined the 2nd Division of the active fleet in 1897, which also included the ironclad Andrea Doria, the armored cruiser Marco Polo, the protected cruisers Etna, Stromboli, and Liguria, and the torpedo cruisers Urania and Partenope. [7] The ship was assigned to the Atlantic Naval Division in 1899, along with Marco Polo and the protected cruisers Etna, Dogali, and Giovanni Bausan. [8] In 1903, Caprera was sent to strengthen the Red Sea Station, which also included the old screw corvette Cristoforo Colombo, the gunboat Volturno, and the aviso Barbarigo. [9] By 1907, Caprera had been transferred to the Reserve Squadron, along with four of the older ironclad battleships. [10] The following year, she was stationed in Italian East Africa. While there, an Italian meteorologist conducted several experiments aboard the ship with a hot air balloon to study the monsoon winds in the region, beginning in Zanzibar. [11] The tests, which were conducted in the last week of July, were unsuccessful, as the weather was unfavorable. [12]

At the start of the Italo-Turkish War in September 1911, Caprera was stationed in Italy, alternating between the ports of La Spezia and Naples, along with her sister ships Urania and Iride. The threat of an Ottoman attack from the Arabian Peninsula across the Red Sea to Italian Eritrea led the Italian High Command to reinforce the Red Sea Squadron. Caprera and several destroyers were sent to strengthen the Italian defenses. The protected cruiser Piemonte and two destroyers annihilated a force of seven Ottoman gunboats in the Battle of Kunfuda Bay on 7 January 1912, wiping out the core of Ottoman naval forces in the area. Caprera and the rest of the Italian ships then commenced a bombardment campaign against the Turkish ports in the Red Sea before declaring a blockade of the city of Al Hudaydah on 26 January. On 27 July and 12 August, Caprera, her sister ship Aretusa, and the protected cruiser Piemonte conducted two bombardments of Al Hudaydah. During the second attack, they destroyed an Ottoman ammunition dump. On 14 October, the Ottoman government agreed to sign a peace treaty, ending the war. [13] Caprera did not remain in service long after the end of the war. She was sold for scrap in May 1913 and thereafter broken up. [3]

Footnotes

Notes

  1. ↑ "/40" refers to the length of the gun in terms of calibers, meaning that the length of the barrel is 40 times its internal diameter.

Citations

  1. ↑ Fraccaroli, pp. 347–348.
  2. ↑ Sondhaus, p. 149.
  3. 1 2 3 4 5 6 Fraccaroli, p. 347.
  4. ↑ Notes on Ships and Torpedo Boats — Italy, p. 68.
  5. ↑ Garbett 1895, p. 90.
  6. ↑ The Italians in Africa, p. 23.
  7. ↑ Garbett 1897, p. 789.
  8. ↑ Garbett 1899, p. 792.
  9. ↑ Garbett 1903, p. 1069.
  10. ↑ Garbett 1907, p. 93.
  11. ↑ Geikie & Newbigin, p. 432.
  12. ↑ Lockyer, p. 506.
  13. ↑ Beehler, pp. 9, 51, 90, 95.

Related Research Articles

Italian ironclad <i>Ruggiero di Lauria</i> Ironclad warship of the Italian Royal Navy

Ruggiero di Lauria was an ironclad battleship built in the 1880s for the Italian Regia Marina. She was the lead ship of the Ruggiero di Lauria class, which included two other ships, Francesco Morosini and Andrea Doria. Ruggiero di Lauria, named for the medieval Sicilian admiral Ruggiero di Lauria, was armed with a main battery of four 432 mm (17 in) guns, was protected with 451 mm (17.75 in) thick belt armor, and was capable of a top speed of 17 knots.

Italian corvette <i>Cristoforo Colombo</i> (1892) Screw corvette of the Italian Regia Marina

Cristoforo Colombo was a steel-hulled corvette built in the early 1890s for the Italian Regia Marina. The ship was built as a replacement for an earlier vessel of the same name, based on a nearly identical design. The new ship was intended to serve in Italy's colonial empire in eastern Africa, and was designed to be able to operate at long range, far from home ports, for an extended period of time.

Italian cruiser <i>Etruria</i> Protected cruiser of the Italian Royal Navy

Etruria was a protected cruiser of the Italian Regia Marina built in the 1891 by the Cantiere navale fratelli Orlando shipyard of Livorno. She was the third of six vessels of the Regioni class, all of which were named for current, or in the case of Etruria, former regions of Italy. The ship was equipped with a main armament of four 15 cm (5.9 in) and six 12 cm (4.7 in) guns, and she could steam at a speed of 18 knots.

Italian cruiser <i>Etna</i> Protected cruiser of the Italian Royal Navy

Etna was a protected cruiser of the Italian Regia Marina built in the 1880s. She was the lead ship of the Etna class, which included three sister ships. Named for Mount Etna on the island of Sicily, the ship was laid down in January 1883, was launched in September 1885, and was completed in December 1887. She was armed with a main battery of two 254 mm (10 in) and a secondary battery of six 152 mm (6 in) guns, and could steam at a speed of around 17 knots.

Italian cruiser <i>Stromboli</i> Protected cruiser of the Italian Royal Navy

Stromboli was a protected cruiser of the Italian Regia Marina built in the 1880s. She was the second member of the Etna class, which included three sister ships. She was named for the volcanic island of Stromboli, and was armed with a main battery of two 254 mm (10 in) and a secondary battery of six 152 mm (6 in) guns, and could steam at a speed of around 17 knots. Her career was relatively uneventful; the only significant action in which she took part was the campaign against the Boxer Uprising in China in 1900. She returned to Italy in 1901 and spent the rest of her career in reserve or as an ammunition ship, apart from a brief stint in active service in 1904. Stromboli was stricken from the naval register in 1907 and sold for scrapping in 1911.

Italian cruiser <i>Partenope</i> Torpedo cruiser of the Italian Royal Navy

Partenope was a torpedo cruiser built for the Italian Regia Marina in the 1880s, the lead ship of her class, which included seven other vessels. The ship was built by the Regio Cantiere di Castellammare di Stabia; she was laid down in June 1888, was launched in December 1889, and was completed in September 1890. Her main armament were her five torpedo tubes, which were supported by a battery of ten small-caliber guns.

Italian cruiser <i>Minerva</i> Torpedo cruiser of the Italian Royal Navy

Minerva was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. The second of eight ships, Minerva was built by Gio. Ansaldo & C.; her keel was laid down in February 1889, she was launched in February 1892, and she was commissioned in August that year. Her main armament were her five torpedo tubes, which were supported by a battery of ten small-caliber guns. Minerva spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. She was converted into a minelayer in 1909–1910. She did not see significant action during the Italo-Turkish War in 1911 or World War I in 1915–1918, though she was used to lay defensive minefields during the latter conflict. The ship was sold for scrap in 1921.

Italian cruiser <i>Euridice</i> Torpedo cruiser of the Italian Royal Navy

Euridice was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. She was built by the Regio Cantiere di Castellammare di Stabia shipyard, with her keel laying in February 1889, her launching in September 1890, and her commissioning in May 1891. Her main armament was her six torpedo tubes, which were supported by a battery of ten small-caliber guns. Euridice spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. She was withdrawn from service in 1907 and sold for scrapping.

Italian cruiser <i>Urania</i> Torpedo cruiser of the Italian Royal Navy

Urania was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. She was built by the Cantieri navali Odero shipyard; her keel was laid in February 1889, she was launched in June 1891, and was commissioned in July 1893. Her main armament were her six torpedo tubes, which were supported by a battery of ten small-caliber guns. Urania spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. She was still in service at the outbreak of the Italo-Turkish War in September 1911, but she did not take part in any operations. Instead, she remained in Italian waters and was broken up for scrap in January 1912.

Italian cruiser <i>Iride</i> Torpedo cruiser of the Italian Royal Navy

Iride was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. Laid down in February 1889 at the Regio Cantiere di Castellammare di Stabia shipyard, she was launched in July 1890 and was commissioned in November 1892. Her main armament were her six torpedo tubes, which were supported by a battery of ten small-caliber guns. Iride spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. During the Italo-Turkish War in September 1911, she remained in Italian waters until late in the conflict; she escorted a troop convoy to North Africa in April 1912 and bombarded Ottoman positions in June and July. Iride was eventually broken up for scrap in December 1920.

Italian cruiser <i>Aretusa</i> Torpedo cruiser of the Italian Royal Navy

Aretusa was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. Laid down in June 1889 at the Cantiere navale fratelli Orlando shipyard, she was launched in March 1891 and was commissioned in September 1892. Her main armament were her six torpedo tubes, which were supported by a battery of ten small-caliber guns. Aretusa spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. At the start of the Italo-Turkish War in September 1911, she was assigned to the Red Sea Squadron in Italian Eritrea. She bombarded Ottoman positions in the Arabian Peninsula and took part in a blockade of the coast. Worn out by the end of the war in October 1912, Aretusa was sold for scrap that December and broken up.

Italian cruiser <i>Calatafimi</i> Torpedo cruiser of the Italian Royal Navy

Calatafimi was a torpedo cruiser of the Partenope class built for the Italian Regia Marina in the 1880s. She was built by the Cantiere navale fratelli Orlando shipyard; her keel was laid in July 1891, she was launched in May 1894, and was commissioned in December 1895. Her main armament were her five torpedo tubes, which were supported by a battery of eleven small-caliber guns. Calatafimi spent most of her career in the main Italian fleet, where she was primarily occupied with training exercises. The ship was sold in March 1907 and broken up for scrap.

Italian cruiser <i>Saetta</i> Torpedo cruiser of the Italian Royal Navy

Saetta was a Folgore-class torpedo cruiser built for the Italian Regia Marina in the 1880s. Armed with three 14 in (356 mm) torpedo tubes and six light guns, she was capable of a top speed of 17 knots. She was built in the mid-1880s, was launched in May 1887, and was completed in February 1888. Saetta spent the first decade of her career serving in the main Italian fleet, where she conducted peacetime training exercises. In 1897, she was withdrawn from front-line service and employed as a gunnery training ship, a role she filled for another decade. The Regia Marina ultimately sold Saetta for scrap in May 1908.

Italian cruiser <i>Goito</i> Torpedo cruiser of the Italian Royal Navy

Goito was a torpedo cruiser built for the Italian Regia Marina in the 1880s. She was the lead ship of the Goito class, which included three other vessels. Goito was built by the Regio Cantiere di Castellammare di Stabia shipyard between September 1885 and February 1888. She was armed with a variety of light guns and five 14-inch (356 mm) torpedo tubes, and was capable of a top speed of 18 knots. The ship served the duration of her career in the main Italian fleet. Her early service was primarily occupied with training exercises; front-line duties ended in 1897 when she was converted into a minelayer, though she continued to participate in fleet exercises. During World War I, Goito laid defensive minefields in the Adriatic Sea. She was eventually sold for scrap in 1920 and broken up.

Italian cruiser <i>Montebello</i> Torpedo cruiser of the Italian Royal Navy

Montebello was the second of four Goito-class torpedo cruisers built for the Italian Regia Marina in the 1880s. She was built at the Arsenale di La Spezia between September 1885 and January 1889, when she entered service. She was armed with a variety of light guns and four 14-inch (356 mm) torpedo tubes, and was capable of a top speed of 18 knots. Montebello spent her active-duty career with the main Italian fleet, where she frequently took part in annual training exercises. In 1903, she was withdrawn from front-line service and converted into a training ship for engine room personnel; she served in this capacity until 1920, when she was sold for scrap.

Italian cruiser <i>Monzambano</i> Torpedo cruiser of the Italian Royal Navy

Monzambano was a torpedo cruiser of the Goito class built for the Italian Regia Marina in the 1880s. The ship was built at the Arsenale di La Spezia, beginning with her keel laying in August 1885 and ending with her completion in August 1889. She was armed with a variety of light guns and five 14-inch (356 mm) torpedo tubes, and was capable of a top speed of 18 knots. The ship spent her career in the main Italian fleet conducting training exercises, and did not see action. She spent 1898 patrolling the eastern Mediterranean Sea with the Levant Squadron. Monzambano was withdrawn from service in 1901 and broken up for scrap that year.

Italian cruiser <i>Confienza</i> Torpedo cruiser of the Italian Royal Navy

Confienza was the last of four Goito-class torpedo cruisers built for the Italian Regia Marina in the 1880s. She was armed with a variety of light guns and five 14-inch (356 mm) torpedo tubes, and was capable of a top speed of 17 knots. The ship was built in the late 1880s, with her keel laying in September 1887 at the Arsenale di La Spezia; she was completed in April 1890 and thereafter entered service with the Italian fleet. Confienza had a short and uneventful career; she spent her time in Italian waters and did not see any action. Stricken from the naval register in August 1901, she was thereafter broken up for scrap.

<i>Partenope</i>-class cruiser Torpedo cruiser class of the Italian Royal Navy

The Partenope class was a group of eight torpedo cruisers built for the Italian Regia Marina in the 1880s and 1890s. The class comprised Partenope, Minerva, Euridice, Urania, Iride, Aretusa, Caprera, and Calatafimi. Based on the earlier cruiser Tripoli, the Partenope class represented a temporary embrace of the Jeune École, which emphasized the use of cheap torpedo-armed vessels as a means to defeat the much more expensive ironclad battleships of the day. To fulfill their intended role, the vessels were armed with five or six 450 mm (17.7 in) torpedo tubes.

Italian cruiser <i>Tripoli</i> Torpedo cruiser of the Italian Royal Navy

Tripoli was the first modern torpedo cruiser built for the Italian Regia Marina. She was built by the Regio Cantiere di Castellammare di Stabia shipyard in 1885–86. The only vessel of her class, she provided the basis for the Goito and Partenope classes that followed. She was armed with five 14-inch (356 mm) torpedo tubes and a battery of light guns, and was capable of a top speed of 17.5 knots. Tripoli spent her career in the main Italian fleet, where she was occupied primarily with peacetime training exercises. She was modernized several times throughout her career, and in 1910, was converted into a minelayer, a role she served in for another thirteen years, including during World War I. She was the longest serving torpedo cruiser in the Italian fleet, with over 36 years in service by the time she was discarded in March 1923.

References

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.