Kaikai entering Sydney Cove | |
History | |
---|---|
Name | Kaikai |
Namesake | Australian Indigenous word for 'jewfish' or 'food' |
Operator | Sydney Ferries Limited |
Builder | David Drake Ltd, W M Ford Jnr, Balmain |
Cost | £13,575. [1] |
Launched | 1906 |
Completed | 1907 |
Out of service | 1942? |
Identification | O/N: 121165 [2] [3] |
Fate | To Navy 1942, broken up 1947 |
General characteristics | |
Tonnage | 303 tons |
Length | 46.3 m |
Beam | 10.1 m |
Installed power | 59 hp triple expansion steam [4] |
Propulsion | double-ended screw |
Speed | 11.5 knots [4] |
Capacity | 1,245 |
Kaikai was a "K-class" ferry on Sydney Harbour. Commissioned in 1907, the timber-hulled steamer was built for Sydney Ferries Limited during the boom in cross-harbour ferry travel prior to the 1932 opening of the Sydney Harbour Bridge. At the time of launch, Kaikai was one of Sydney's largest wooden ferries, being the longest and second largest by tonnage. She was a typical example of the "K-class"; a group of double-deck, double-ended, steam-powered screw ferries.
Kaikai was built for the short but busy cross-harbour route between Circular Quay and Milsons Point. She survived the 1932 opening of the Sydney Harbour Bridge (17 other Sydney Ferries Limited vessels were sold at the time). She was taken over by the Royal Australian Navy in 1942 and sold for breaking up in 1947.
Kaikai followed Sydney Ferries Limited's tradition of naming their vessels after Australian Indigenous words starting with "K". [5] "Kaikai" is thought to be an indigenous word for 'food' or 'jewfish'.
Kaikai was built for Sydney Ferries Limited during the early twentieth century boom in cross-Harbour travel prior to the 1932 opening of the Sydney Harbour Bridge. [6] She was typical of a broader type of timber double-ended screw ferry known as the K-class. The company built 25 of these vessels between the 1890s and early 1920s to meet the booming demand. The K-class were all propelled by triple expansion steam engines and were predominantly timber-hulled (four later K-class had steel hulls). [7]
Kaikai's design was an evolution of Sydney Ferries Limited's K-class design. The hull and deck fittings were designed by J Barber, foreman joiner of Sydney Ferries Limited, under the supervision of, and to a specification by T. Brown, works manager. [8] She followed Kareela (1905) in being the second such ferry to have rounded roofline returns into her wheelhouses, thus fully enclosing the ends of the upper decks. While upper decks had been enclosed since the 1902's Koree , she and previous K-class steamers ( Kurraba (1899), Kirribilli (1900), Kummulla (1903), and Kulgoa (1905)) all had open ended upper decks.
She was built by David Drake Ltd, Balmain for £13,575. [1] Her keel and keelson were made of ironbark, and at the time of her launch, it was noted to be specially strengthened throughout, with 14 x 14 inch hardwood belting running around the vessel. [8] The floors and frames were of hardwood with the bottom planking also of hardwood throughout, and copper-fastened up to the waterline. [8] She had four wooden bulkheads and one iron bulkhead. [9] The hull was flared out with no overhanging sponsons, with a 4 inch x 1 inch iron sponson band. [10]
Her 59 hp triple expansion steam engine and boilers were supplied by Mort's Dock and Engineering to a specification provided by Sydney Ferries Limited works manager, Mr. T Brown. [8] Of direct action, surface condensing type, her engines had cylinders of 13-inch, 21-inch, and 34-inch diameters respectively, with a stroke length of 21 inches. [4] Her two through multi-tubular cylindrical type boilers were both 2.18 m in diameter, 4.6 m in length, and carried a working pressure of 180 1b, with a total heating space of 93 m2. [8] The boilers were fitted with Deightons patent suspension furnace and automatic pumps as well as a fuel heater. [9] She was fitted with a combined steam and hand steering gear from Alley and McClelland's. [8] [9] Electric lights, still a relative recent innovation for ferries, were supplied by Aller and McLellan of Glasgow and fitted Scott Henderson and Co. [9]
When new, she was the longest of the Sydney Ferries Ltd fleet (and second largest by tonnage). A new pontoon was built at Circular Quay to accommodate her. Her 46.3 m length was significantly longer than the next largest ferry, Kulgoa's, (42.7 m) and her beam was 10.1 m compared to Kulgoa's 9.6 m. While her tonnage was smaller than Kulgoa's (303 tons vs 338 tons), her rated passenger capacity of 1,250 was similar to Kulgoa's 1,255.
Kaikai was launched on 7 November 1906, and christened by Miss Nina Massic, [11] eldest daughter of H H Massie and granddaughter of J A Dibbs. [8] She was the eighth Sydney Ferries Limited vessel to use Indigenous names starting with 'K'. Kookooburra also under construction at the time of Kaikai's launch would be the ninth such vessel. She reached 11.5 knots on her trials on 13 March 1907 which made her the fastest boat in the Sydney Ferries fleet. [10]
An important event in the history of the ferry traffic of Port Jackson was celebrated yesterday afternoon, when the new steamer Kaikai, the largest and best appointed and, equipped ferry steamer yet built for the Sydney Ferries, Limited, was taken on her official speed trials.
—Report in the Sydney Morning Herald on Kaikai's trials. [12]
Kaikai began service on Saturday 23 March 1907 on the Milsons Point run. [13]
Following the opening of the Bridge, Sydney Ferries Limited patronage fell from a 1927 peak of 47 million annually to 15 million in 1933. [14] The Milsons Point service, which crossed the harbour at the location of the new bridge, was quickly redundant. 17 vessels from the fleet were retired from service, including K-class ferries of similar age Koree, Kummulla , Kurraba and Kirribilli. [15] Kaikai, however, remained in service. With the Milsons Point and Lavender Bay routes discontinued following the bridge opening, she was used on other routes and for charter and concert events. She was modified with a flying bridge to provide her master with greater visibility in order to follow yacht races.
She was taken over by the Navy in 1942 for use as accommodation ship as part of the War effort. She was purchased by the Navy in 1943 and register closed on 10 March of that year. [4] Following the War, she was sold for breaking up 1947.
HMAS Kuttabul, formerly SS Kuttabul, was a Royal Australian Navy depot ship, converted from a Sydney Ferries Limited ferry.
Koompartoo was a 1922 Sydney Ferries Limited K-class ferry later converted to an Royal Australian Navy boom defence vessel. Koompartoo, described in the press as a "Dreadnought for the Milsons Point run" and "a titan amongst ferries", was along with her sister ferry, Kuttabul, the highest capacity ferries ever on Sydney Harbour.
HMAS Kuramia was a Royal Australian Navy boom defence vessel, converted from a Sydney Ferries Limited K-class ferry.
Sydney Ferries Limited operated ferry services on Sydney Harbour from 1900 until June 1951.
Bellubera was a ferry operated by the Port Jackson & Manly Steamship Company on the Manly service. Launched in 1910, she was the third of six "Binngarra-type" vessels. Upon her 1936 conversion from steam power, she became the first diesel-electric vessel in Australia. She was decommissioned in 1973, and scuttled at sea in 1980.
The K-class ferries were a group of double-ended screw steam ferries run by Sydney Ferries Limited and its government successors on Sydney Harbour. The company introduced more than two dozen of the vessels from the 1890s through to the early twentieth century to meet the booming demand for ferry services across Sydney Harbour prior to the opening of the Sydney Harbour Bridge in 1932.
Kirawa was a ferry on Sydney Harbour. She was a near identical sister vessel with Kanangra both of which were launched in 1912 during the early-twentieth pre-Sydney Harbour Bridge boom years of Sydney Ferries Limited.
Koree was a "K-class" ferry on Sydney Harbour. Launched in 1902, the timber-hulled steamer was built for Sydney Ferries Limited during the boom in cross-harbour ferry travel prior to the opening of the Sydney Harbour Bridge.
Kulgoa was a "K-class" ferry on Sydney Harbour. Launched in 1905, the timber-hulled steamer was built for Sydney Ferries Limited during the boom in cross-harbour ferry travel prior to the 1932 opening of the Sydney Harbour Bridge. Kulgoa was Sydney's largest ever wooden ferry. She was a typical early example of the "K-class"; a group of double-deck, double-ended, steam-powered screw ferries. Kulgoa was one of the first Sydney ferries built with the sides of her promenade (upper) deck enclosed, although the ends near the wheelhouses remained open.
The Kirrule-type ferries - Kiandra, Kirrule and Kubu - were three identical K-class ferries that operated on Sydney Harbour by Sydney Ferries Limited.
Kummulla was a "K-class" ferry on Sydney Harbour. Launched in 1903, the timber-hulled steamer was built for Sydney Ferries Limited during the boom in cross-harbour ferry travel prior to the opening of the Sydney Harbour Bridge. She was decommissioned in 1934 after the 1932 opening of the Bridge.
Wallaby was a ferry that operated on Sydney Harbour.
Kanimbla was a "K-class" ferry on Sydney Harbour. Launched in 1910, the timber-hulled steamer was built for Sydney Ferries Limited during the boom in cross-harbour ferry travel prior to the opening of the Sydney Harbour Bridge. Kanimbla was renamed "Kurra-Ba" in 1935. She was laid up in the 1940s and broken up in the 1950s.
Kareela was a "K-class" ferry on Sydney Harbour. Launched in 1905, the double-ended timber-hulled steamer was built for Sydney Ferries Limited in response to the early twentieth century boom in cross-harbour ferry travel prior to the opening of the Sydney Harbour Bridge. She was the first of Sydney Ferries Limited's boats to have a fully enclosed upper deck.
Kosciusko was a "K-class" ferry on Sydney Harbour. Launched in 1911, the timber-hulled steamer was built for Sydney Ferries Limited during the boom in cross-harbour ferry travel prior to the opening of the Sydney Harbour Bridge.
Sydney Harbour ferry services date back to the first years of Sydney's European settlement. Slow and sporadic boats ran along the Parramatta River from Sydney to Parramatta and served the agricultural settlements in between. By the mid-1830s, speculative ventures established regular services. From the late-nineteenth century the North Shore developed rapidly. A rail connection to Milsons Point took alighting ferry passengers up the North Shore line to Hornsby, New South Wales via North Sydney. Without a bridge connection, increasingly large fleets of steamers serviced the cross harbour routes and in the early twentieth century, Sydney Ferries Limited was the largest ferry operator in the world.
Kookooburra was a "K-class" ferry on Sydney Harbour. Commissioned in 1907, the timber-hulled steamer was built for Sydney Ferries Limited during the boom in cross-harbour ferry travel prior to the opening of the Sydney Harbour Bridge. She was retired from Sydney Harbour service in 1947 after which she was sent to Newcastle. She is thought to have been broken up in 1959.
Kurraba and Kirribilli were two similar "K-class" ferries on Sydney Harbour. Launched in 1899 and 1900 respectively, the two timber-hulled steamers were built for Sydney Ferries Limited during the boom in cross-harbour ferry travel prior to the opening of the Sydney Harbour Bridge.
Kaludah was a K-class ferry on Sydney Harbour, Australia. Commissioned in 1909, the timber-hulled steamer was built for Sydney Ferries Limited during the boom in cross-harbour ferry travel prior to the 1932 opening of the Sydney Harbour Bridge. Like the other "K-class" ferries, she was double-deck, double-ended, steam-powered screw ferry. However, she and the larger but otherwise similar Kookooburra (1907), were the only two K-class ferries designed by naval architect Walter Reeks and not Sydney Ferries Limited's Captain Summerbell.
Kanangra is a retired ferry on Sydney Harbour. She was launched in 1912 during the early-twentieth century pre-Sydney Harbour Bridge boom years of Sydney Ferries Limited.