LSWR 415 class

Last updated

LSWR/SR 415 class
Tipton St Johns geograph-2647435-by-Ben-Brooksbank.jpg
415 class No. 30583 at Tipton St Johns in 1953, while on a railtour.
Type and origin
Power typeSteam
Designer William Adams
Builder Robert Stephenson & Co. (28);
Dübs & Co. (20);
Neilson & Co. (11);
Beyer Peacock (12)
Serial numberRS 2501–2518, 2601–2610
Dübs 2000–2009, 2105–2114;
Neilson 3200–3210;
BP 2167–2178
Build date18821885
Total produced71
Specifications
Configuration:
   Whyte 4-4-2 T
Gauge 4 ft 8+12 in (1,435 mm)
Leading dia. 3 ft 1 in (0.940 m)
Driver dia.5 ft 7 in (1.702 m)
Length36 ft 5+12 in (11.11 m)
Loco weight55 tons 2 cwt (124,200 lb or 56.3 t)
Fuel type Coal
Fuel capacity1 long ton (1.02 t; 1.12 short tons)
Water cap.1,200 imp gal (5,500 L; 1,400 US gal)
Boiler pressure160  psi (1.10  MPa)
Cylinders Two, outside
Cylinder size 17.5 in × 24 in (444 mm × 610 mm)
Performance figures
Tractive effort 14,919  lbf (66.36  kN)
Career
Operators London and South Western Railway,
Southern Railway,
British Railways
Class 415, later 0415
Power classLSWR / SR: K,
BR: 1P
NicknamesRadial Tank
Locale Great Britain
Withdrawn1916–1928, 1961
PreservedNo. 488
DispositionOne preserved, remainder scrapped

The LSWR 415 class is a 4-4-2T steam tank locomotive, with the trailing wheels forming the basis of its "Radial Tank" moniker. It was designed by William Adams and introduced in 1882 for service on the London and South Western Railway (LSWR).

Contents

Originally rostered for suburban traffic, the class was soon displaced to the countryside by Dugald Drummond's M7 class. Most of the class was scrapped around the end of the First World War, and further decreases meant that all of them were due to be withdrawn by 1929. However, the class was noted for its long service on the Lyme Regis branch line, and three members of this long obsolete class were utilised on this duty until 1962, when suitable replacements became available. One has survived and can be found on the Bluebell Railway.

Background

This class, designed by William Adams, was the result of the work made to replace the stop-gap 46 Class on suburban services around London. [1] In the event, they were also intended to supplement this class while members entered the works for rebuilding into "Radial Tank" configuration. [1] All were built from 1882, and were also intended for medium to heavy suburban passenger traffic around the South Coast on the LSWR railway network. [1]

Construction history

William Adams' 415 (later 0415) class was based on his earlier 46 class, and was specifically designed with London suburban services in mind. [2] The design was based on a 4-4-0 design with a trailing axle added to support an enlarged coal bunker, a necessity for the intensive suburban services of the LSWR network. [3] The radial axlebox worked in a corresponding curved hornblock the centre of which was struck near the middle of the chassis. The device was originally invented in 1863 by William Bridges Adams (no relation) [4] and could be applied to a leading or trailing axle but was generally preferred for the latter. Many other engineers used it, including Francis Webb, R. J. Billinton, Henry Ivatt, and D. E. Marsh. Many of the tank engines so fitted earned the soubriquet "Radial Tanks", or simply "Radials". The enlarged coal bunker was also designed to incorporate a back tank for extra water storage in addition to the capacity of the side tanks. Valve gear was of modified Stephenson type. [2]

Production began in 1882 when a total of four engineering companies were contracted by the LSWR to construct the new class, which numbered 71 when production ceased in 1885. [3] These were: Robert Stephenson & Co. (28 constructed); Dübs & Co. (20 constructed); Neilson & Co. (11 constructed) and finally Beyer, Peacock and Company (12 constructed). [2] This arrangement was because Nine Elms, the LSWR's own locomotive works, was already stretched to capacity in terms of production. [2]

YearBuilder serial numberQuantityLSWR numbersNotes
1882 Beyer, Peacock & Co. 2167–217812415–426
1883 Robert Stephenson & Co. 2501–251818427–432, 45, 47–57
1884 Dübs & Co. 2000–200910169–171, 173, 490–495
1885 Neilson & Co. 3200–321011479–489
1885Robert Stephenson & Co. 2601–26101068, 77–78, 82, 104, 106–107, 125–126, 12968, 77–78 renumbered 58–60 in 1889–90
1885Dübs & Co. 2105–211410516–525

Although all were constructed to the same basic design, the locomotives that were outshopped from 1884 had slightly larger side water tanks and deeper fireboxes, therefore increasing efficiency. [3] All carried the trademark Adams stove pipe chimney throughout his tenure as Locomotive Superintendent of the LSWR. [3] In order to facilitate the speedy overhaul of these locomotives in the confined spaces of Nine Elms, spare boilers were constructed. Coupled to a short wheelbase and guiding bogies, the locomotive was relatively manoeuvrable on tight curves, a feature that was to ensure the survival of some of the class later on. [2]

Upon the appointment of Dugald Drummond as Superintendent of the LSWR after Adams' departure, the class was modified slightly, with the application of his lipped chimney in place of the stovepipe version that the locomotives were equipped with when built. [3] This also coincided with the addition of coal rails to the bunker in an attempt to increase capacity. Because the class was not considered to have a long working life under Robert Urie, they were not equipped with superheating. [2]

Operational details and preservation

Despite being well received in service by locomotive crews, the 0415's tenure on the London suburban services was relatively short-lived. [3] This was especially true with the introduction of the Adams T1 class of 0-4-4 tanks displacing some of the class from the London area. [2] However, it was not until the introduction of Drummond's M7 class 0-4-4 tanks and electrification of the suburban railway network that the class was generally removed from the London section of the LSWR to rural branch duties from 1895. [2]

Despite this, in 1903 the inextricable link was made between the class and the severely curved Lyme Regis branch. Unsuccessful trials were carried out with the Stroudley Terriers and the Adams O2 class; however with the trailing axle modified [5] the flexible 0415 class tanks proved to be highly suited to the operating conditions of that line. [2] As a result, two were allocated to Exmouth Junction shed for the Axminster to Lyme Regis service, joined in 1946 by a third example retrieved from the East Kent Railway.

War service and Colonel Holman F. Stephens

The class also saw service during World War I, which effectively extended their working lives until the mass withdrawal of 38 engines in 1921. [2] Many of the class became surplus to requirements during the later years of the war. Several of the class were utilised in Scotland where the Highland Railway was experiencing a locomotive shortage. [2] In September 1917 number 0488 was sold to the Ministry of Munitions, and then worked at Ridham Dock near Sittingbourne either as a rather unsuitable dock shunter or more likely on staff trains. It was purchased from the Ministry of Munitions Disposal and Liquidation Commission in March 1923 for £375 by Colonel Holman F. Stephens, for use on the East Kent Light Railway – a system serving the coalfield of East Kent – and was delivered to Shepherdswell on 13 April 1923.

As a purely passenger engine, the new arrival was little suited to the East Kent Light Railway's primarily industrial needs; it was only used when absolutely necessary, and then largely on coal trains, taking 14 wagons on the Tilmanstone shuttle. Latterly it seems to have worked only about once a month, and was last used on 29 May 1943.

Southern Railway ownership

These decreases in the class strength meant that only 30 locomotives entered into Southern Railway stock in 1923. The continued electrification and subsequent intensification of timetables meant that the remaining two members of the class still in service, numbers 0125 and 0520, were retired in 1929. [3] The intention was to replace the class on the Lyme Regis branch with two ex-LB&SCR D1 class tanks, though these proved highly unsatisfactory. This led to the decision to recommission and rebuild numbers 0125 and 0520 at Eastleigh Works, where they were outshopped as 3125 and 3520. [2] [3]

In 1946, the Southern Railway needed a third 'Radial' tank for the Lyme Regis branch to cover locomotive unavailability, and found 0488 (East Kent Light Railway number 5) out of use, but intact. In March 1946, the SR purchased it for £120. It was extensively overhauled for SR service at Eastleigh, where it received its updated number, 3488.

Operation during nationalisation and preservation

These three locomotives continued on the Lyme Regis branch after Nationalisation due to the lack of better motive power to cope with the curve restrictions in place on the line. By 1958 all three were showing their age, and the end finally came in 1961. [2] Modifications were undertaken on the trackwork to enable Ivatt 2-6-2 tanks to be passed for use on the line. This resulted in numbers 30582 (née 125) and 30584 (née 520) being withdrawn and scrapped. Steam on the branch was however short lived after the demise of the 0415 class, and the Ivatt tanks were soon replaced by diesel railcars. The branch was closed under the Beeching cuts in 1965. [2] No. 30582 was the subject of a preservation attempt by the Kent & East Sussex Railway. [6]

However the final example, 30583 (née 488), was purchased by the Bluebell Railway, chosen because of the three it was the only one retaining the original pattern of boiler. After arriving at the line under its own steam, it proved a capable machine, and was painted in two different LSWR and BR liveries, up until 1990. At present, it is displayed as a static exhibit, as extensive overhaul (probably involving replacement of the boiler barrel) is required before it can steam again.

Accidents and incidents

Livery and numbering

LSWR and Southern Railway

No. 488 at Sheffield Park on the Bluebell Railway 25 October 1975. Fletching Bluebell Railway Adams 4-4-2T at Sheffield Park geograph-2982220-by-Ben-Brooksbank.jpg
No. 488 at Sheffield Park on the Bluebell Railway 25 October 1975.

Initially outshopped in early LSWR passenger Yellow Ochre/Brown livery with the initials 'LSW' on the water tank sides. This was eventually superseded by the later LSWR Passenger Sage Green livery, with black edging and black and white lining. [3] Numbering was in gilt, as was the 'LSWR' lettering on the water tank side. [3]

Numbering under the LSWR depended on batch, which therefore led to a confusing system of numbers that were granted to locomotives as they were outshopped. [3] Beyer-Peacock constructed the first batch, which was allocated the series 415432. Stephenson constructed several batches including the series 4557, 68, 82, 77 and 78, with the final examples being 104, 106, 107, 125, 126 and 129. Dubs produced numbers 169173, 490495 and finally 516525. Neilson produced the batch 479489. [3]

A duplicate number was granted to class members between 1903 and 1924, so that after grouping in 1923, the Southern Railway inherited locomotives with a '0' prefix to the LSWR numbers. The final three class members that survived the mass withdrawal of 1929 were renumbered 3488, 3125 and 3520 after overhaul.

Livery under the Southern was Richard Maunsell's darker version of the LSWR Sage Green livery, with yellow numbering and lettering on the water tank sides and coal bunker. This livery also featured black and white lining.

Post-1948 (nationalisation)

The class was given the Power Classification of 1P, and initially carried the Southern livery, though this was promptly changed to the BR Standard Mixed-Traffic Black livery with red and white lining. [8] Numbering was of the BR standard system, the three locomotives being allocated the numbers 30582, 30583 and 30584. [8]

Table of withdrawals
YearQuantity in
service at
start of year
Quantity
withdrawn
Locomotive numbersNotes
19167110424
19177010488sold Ministry of Munitions; to East Kent Light Railway 5
19186920479, 0489
19216737047–049, 051–053, 056–057, 060, 082, 0104, 0107, 0171, 0173,
0415, 0417–0421, 0423, 0425, 0427, 0430, 0432, 0482, 0484, 0491–0495, 0516–518, 0523, 0525
19233010106
1924298E045, E055, E0126, E0129, E0426, E0481, E0485, E0487
19252112E058, E059, E0416, E0422, E0428, E0429,
E0431, E0480, E0483, E0517, E0521, E0524
192694E0169, E0490, E0519, E0522
192752E050, E054
192831E0486
19462-1EKLR 5 repurchased as SR 3488
19613330582–30584ex-3125, 3488, 3520

Related Research Articles

<span class="mw-page-title-main">BR Standard Class 2 2-6-2T</span>

The British Railways standard class 2 2-6-2T was a class of steam locomotive, one of the standard classes of the 1950s.

<span class="mw-page-title-main">LSWR H15 class</span>

The LSWR/SR H15 class was a class of 2-cylinder 4-6-0 steam locomotives designed by Robert Urie for mixed-traffic duties on the LSWR. Further batches were constructed by Richard Maunsell for the Southern Railway after 1923. They were given the nickname of "Junior King Arthur" due to the size of their driving wheels, the S15 and their N15 cousins had driving wheels which had a diameter of 5 foot and 7 inches and 6 foot and 7 inches respectively.

<span class="mw-page-title-main">LB&SCR A1 class</span> Class of British 0-6-0T steam locomotives

The London, Brighton and South Coast Railway (LB&SCR) A1 class is a class of British 0-6-0T steam locomotive. Designed by William Stroudley, 50 members of the class were built in 1872 and between 1874 and 1880, all at Brighton railway works. The class has received several nicknames, initially being known as "Rooters" by their south London crews. However, the engines were more famously known as "Terriers" on account of the distinctive 'bark' of the exhaust beat. Later in their careers, some engines were known as "Hayling Billy" on account of their work on the Hayling Island branch line. A pub of this name on the island was briefly home to the engine which is now No. W8 Freshwater.

<span class="mw-page-title-main">LSWR M7 class</span> Class of 105 two-cylinder 0-4-4T locomotives

The LSWR M7 class is a class of 0-4-4T passenger tank locomotive built between 1897 and 1911. The class was designed by Dugald Drummond for use on the intensive London network of the London and South Western Railway (LSWR), and performed well in such tasks. Because of their utility, 105 were built and the class went through several modifications over five production batches. For this reason there were detail variations such as frame length. Many of the class were fitted with push-pull operation gear that enabled efficient use on branch line duties without the need to change to the other end of its train at the end of a journey.

<span class="mw-page-title-main">LSWR O2 class</span>

The LSWR O2 class is a class of 0-4-4T steam locomotive designed for the London and South Western Railway by William Adams. Sixty were constructed during the late nineteenth century. They were also the last steam engines to work on the Isle of Wight, with the final two being withdrawn in 1967.

<span class="mw-page-title-main">SR USA class</span>

The SR USA class are some ex-United States Army Transportation Corps S100 Class steam locomotives purchased and adapted by the Southern Railway (SR) after the end of the Second World War to replace the LSWR B4 class then working in Southampton Docks. SR staff nicknamed them "Yank Tanks".

<span class="mw-page-title-main">LSWR L12 class</span>

The London and South Western Railway L12 class was a class of 20 4-4-0 steam locomotives designed for express passenger work by Dugald Drummond. They were introduced to the London and South Western Railway network in 1904. Despite the class being an unremarkable continuation of the Drummond lineage, one member was involved in the infamous Salisbury rail crash in June 1906. None of the class survived into preservation after their brief career in British Railways ownership.

<span class="mw-page-title-main">William Adams (locomotive engineer)</span> English railway engineer

William Adams was an English railway engineer. He was the Locomotive Superintendent of the North London Railway from 1858 to 1873; the Great Eastern Railway from 1873 until 1878 and the London and South Western Railway from then until his retirement in 1895. He is best known for his locomotives featuring the Adams bogie, a device with lateral centring springs to improve high-speed stability. He should not be mistaken for William Bridges Adams (1797–1872) a locomotive engineer who, confusingly, invented the Adams axle – a radial axle that William Adams incorporated in designs for the London and South Western Railway.

<span class="mw-page-title-main">LSWR T9 class</span>

The London and South Western Railway T9 class is a class of 66 4-4-0 steam locomotive designed for express passenger work by Dugald Drummond and introduced to services on the LSWR in 1899. One example has been preserved after British Railways ownership. They were given the nickname of "Greyhounds" due to their speed, up to 85 miles per hour (137 km/h), and reliability.

The Lyme Regis branch line was a railway branch line connecting the seaside town of Lyme Regis with the main line railway network at Axminster, running through picturesque rural countryside on the Dorset - Devon border.

The LSWR 46 Class was a class of 4-4-0 passenger tank locomotive designed by William Adams for the London and South Western Railway. No examples have been preserved.

<span class="mw-page-title-main">LSWR G6 class</span>

The LSWR G6 class was an 0-6-0T tank locomotive designed by William Adams for the London and South Western Railway.

<span class="mw-page-title-main">LSWR S11 class</span>

The LSWR Class S11 was a class of 10 4-4-0 steam locomotives designed for express passenger work by Dugald Drummond. They were introduced to services on the London and South Western Railway in 1903. None of the class survived into preservation after their brief career in British Railways ownership.

<span class="mw-page-title-main">LSWR F13 class</span>

The London and South Western Railway F13 class was a class of 4-6-0 locomotives designed by Dugald Drummond for the London and South Western Railway (LSWR).

<span class="mw-page-title-main">LSWR T14 class</span>

The LSWR Class T14 was a class of ten 4-6-0 locomotives designed by Dugald Drummond for express passenger use on the London and South Western Railway and constructed at Eastleigh in 1911–12.

The LSWR G14 class was a class of 4-6-0 locomotive designed by Dugald Drummond for the London and South Western Railway.

The LSWR P14 class was a class of 4-6-0 locomotive designed by Dugald Drummond for the London and South Western Railway.

<span class="mw-page-title-main">LSWR D15 class</span>

The LSWR D15 class 4-4-0 was the last steam locomotive design by Dugald Drummond for the London and South Western Railway in 1912. By 1912, Dugald Drummond had built several classes of unsuccessful 4-6-0 express passenger locomotives. The result of these failures was that when he designed what was to be his last class in 1911, a new 4-4-0 design emerged from Eastleigh Works in February 1912, with what was to be the first of his D15 class.

LSWR O2 Class W24 <i>Calbourne</i>

W24 Calbourne is an example of the Adams LSWR O2 class 0-4-4T, which is based at the Isle of Wight Steam Railway. It is the sole survivor of its class.

<span class="mw-page-title-main">LB&SCR A1X Class W8 Freshwater</span>

W8 Freshwater is a Stroudley A1X Terrier class 0-6-0T steam locomotive, which is based at the Isle of Wight Steam Railway.

References

Notes

  1. 1 2 3 Burtt, F. (1949)
  2. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Herring 2000 , pp. 44–45.
  3. 1 2 3 4 5 6 7 8 9 10 11 12 Bradley, D.L.: LSWR Locomotives: The Adams Classes(Didcot: Wild Swan Publications, 1985)
  4. Ahrons 1927 , p. 160
  5. Casserly (1971).
  6. "30582". Rail UK. Retrieved 9 December 2020.
  7. Earnshaw 1991, p. 6.
  8. 1 2 Longworth (2005).

Bibliography

  • Ahrons, E. L. (1927), The British Steam Railway Locomotive 1825 to 1925, London: Locomotive Publishing Company
  • Bradley, D.L. (1985), LSWR Locomotives: The Adams Classes, Didcot, Oxon: Wild Swan Publications, ISBN   0-906867-38-X
  • Burtt, F. (1949), L. & S.W.R. Locomotives: 1872–1923, London: Ian Allan
  • Casserly, H.C. (1971), The London & South Western Locomotives (enlarged ed.), London: Ian Allan Limited
  • Earnshaw, Alan (1991). Trains in Trouble: Vol. 7. Penryn: Atlantic Books. ISBN   0-906899-50-8.
  • Herring, Peter (2000), Classic British Steam Locomotives, London: Abbeydale Press, ISBN   1-86147-057-6
  • Longworth, Hugh (2005), British Railway Steam Locomotives: 1948–1968, Oxford Publishing Company, ISBN   0-86093-593-0
  • ABC of British Railways Locomotives, part 2 (1949 ed.), Ian Allan, p. 14