 | This article needs additional citations for verification .(December 2015) |
| LSWR/SR T7 [1] and E10 | |||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 LSWR T7 4-2-2-0 | |||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||
The LSWR Class T7 4-2-2-0 was a prototype express steam locomotive design by Dugald Drummond for the London and South Western Railway introduced in 1897. Five similar locomotives, classified E10, were introduced in 1901. [2]
Number 720 was a prototype locomotive built in 1897 and classified T7. The layout was unusual and influenced by Francis Webb's 3-cylinder compound locomotives introduced in 1883 on the London and North Western Railway (LNWR) that employed two pairs of uncoupled driving wheels; the Drummond locomotives were always known as the "double singles". Five similar locomotives, numbers 369-373, were built in 1901 and classified E10.
Throughout locomotive history, this type of layout with independent uncoupled trains of driving wheels mounted on a common rigid chassis has been repeatedly tried with various aims in mind (the best-known more recent example is the Duplex locomotive).
In the case of Drummond, the main motive appears to have been to obtain maximum grate area in a period where low-pitched boilers were the norm and the firebox had to be set low between the frames. This limited the width of the grate whilst its length depended on the distance between the coupled axles minus the throw of eventual inside cranks; at the same time there was a reluctance to make the coupling rods too long due to concerns about material resistance, for a broken coupling rod could impact the locomotive or anything by the track. One way to resolve this was to eliminate the coupling rods and to have two independent pairs of driving wheels each pair driven by its own cylinders.
The first engineer known to have adopted this solution was Francis Webb, followed by Alfred de Glehn in France who initially combined divided drive and independent driving axles, finally opting solely for the former whilst coupling the driving wheels. The aforementioned engineers' locomotives were compounds, and the layout was also a way of separating high-pressure from low-pressure drive trains.
Drummond's T7 and E10 worked with simple expansion so that the principal benefit sought would be the increased grate area. Compared with Drummond's standard boilers, the T7's barrel length was increased by 1 ft 6 in (0.46 m) to 12 ft (3.7 m).
Another unusual feature of the T7 and E10 locomotives was the valve gear. The valves for the inside cylinders were operated by Stephenson valve gear and the valves for the outside cylinders were operated by Joy valve gear.
In 1905, number 720 was rebuilt with a larger boiler with the diameter increased by 5.25 in (0.133 m) to 4 ft 10.75 in (1.4923 m). The E10s were not rebuilt.
Main components found on a typical steam locomotive include:
Under the Whyte notation for the classification of steam locomotives, 4-2-2 represents the wheel arrangement of four leading wheels on two axles, two powered driving wheels on one axle, and two trailing wheels on one axle.
The GWR 4100 Class was a class of steam locomotives in the Great Western Railway (GWR) of the United Kingdom.
Locomotion No. 1 is an early steam locomotive that was built in 1825 by the pioneering railway engineers George and Robert Stephenson at their manufacturing firm, Robert Stephenson and Company. It became the first steam locomotive to haul a passenger-carrying train on a public railway, the Stockton and Darlington Railway (S&DR).
An 0-2-2, in the Whyte notation for the classification of steam locomotives by wheel arrangement, is one that has two coupled driving wheels followed by two trailing wheels, with no leading wheels. The configuration was briefly built by Robert Stephenson and Company for the Liverpool and Manchester Railway.
The AA20 was a one-off steam locomotive constructed by the Soviet Union.
The London and South Western Railway K10 Class was a class of 40 4-4-0 steam locomotives designed for mixed traffic work. They were introduced on the London and South Western Railway in 1901 and 1902 to the design of Dugald Drummond, where they earned the nickname "Small Hoppers".
During the 1880s and 1890s, William Dean constructed a series of experimental locomotives to test various new ideas in locomotive construction for the Great Western Railway.
The SECR N1 class was a type of 3-cylinder 2-6-0 ('mogul') steam locomotive designed by Richard Maunsell for mixed traffic duties, initially on the South Eastern and Chatham Railway (SECR), and later operated for the Southern Railway (SR). The N1 was a development of the basic principles established by the Great Western Railway's (GWR) Chief Mechanical Engineer (CME) George Jackson Churchward and by Maunsell's previous N class design.
The LSWR T14 class was a class of ten 4-6-0 locomotives designed by Dugald Drummond for express passenger use on the London and South Western Railway and constructed at Eastleigh in 1911–12.
The LSWR D15 class 4-4-0 was the last steam locomotive design by Dugald Drummond for the London and South Western Railway in 1912. By 1912, Dugald Drummond had built several classes of unsuccessful 4-6-0 express passenger locomotives. The result of these failures was that when he designed what was to be his last class in 1911, a new 4-4-0 design emerged from Eastleigh Works in February 1912, with what was to be the first of his D15 class.
London and North Western Railway (LNWR) 2-2-2 No. 3020 Cornwall is a preserved steam locomotive. She was built as a 4-2-2 at Crewe Works in 1847, but was extensively rebuilt and converted into her current form in 1858.
A compound locomotive is a steam locomotive which is powered by a compound engine, a type of steam engine where steam is expanded in two or more stages. The locomotive was only one application of compounding. Two and three stages were used in ships, for example.
The South African Railways Class 16E 4-6-2 of 1935 is a class of passenger steam locomotive.
A divided drive locomotive is a steam locomotive that divides the driving force on its wheels by using different cylinders to power different pairs of driving wheels in order to give better weight distribution and reduce "hammer blow" which can be damaging to the track, or else to enable the wider spacing of the driving wheels to accommodate a larger firebox.
Under the Whyte notation for the classification of steam locomotives, 4-2-2-0 represents the wheel arrangement of four leading wheels on two axles, four independently driven driving wheels on two axles, and no trailing wheels. The arrangement became known as double single.
A steam motor is a form of steam engine used for light locomotives and light self-propelled motor cars used on railways. The origins of steam motor cars for railways go back to at least the 1850s, if not earlier, as experimental economizations for railways or railroads with marginal budgets. These first examples, at least in North America, appear to have been fitted with light reciprocating engines, and either direct or geared drives, or geared-endless chain drives. Most incorporated a passenger carrying coach attached to the engine and its boiler. Boiler types varied in these earlier examples, with vertical boilers dominant in the first decade and then with very small diameter horizontal boilers. Other examples of steam motor cars incorporated an express-baggage or luggage type car body, with coupling apparatus provided to allow the steam motor car to draw a light passenger coach.
The Central South African Railways Rack 4-6-4RT of 1905 was a South African steam locomotive from the pre-Union era in Transvaal Colony.
The MÁV class 601 was a class of Hungarian four-cylinder Mallet locomotives, which was designed to haul long and very heavy cargo on very steep railway tracks. At 22.5 m long and outputting 2,200 kW (3,000 hp), they were the largest and most powerful steam locomotives built in Europe before and during World War I.
The L&YR 2-10-0 was a prospective design for a class of 2-10-0 steam locomotives on the Lancashire and Yorkshire Railway. Initial designs were made by George Hughes between 1913 and 1914, but none of the class were built. If they had been, these would have been the UK's first 10-coupled locomotives in regular service.
