SR Lord Nelson class

Last updated

SR Lord Nelson class [1]
SR LN 850 "Lord Nelson".jpg
850 "Lord Nelson"
Type and origin
Power typeSteam
Designer Richard Maunsell
BuilderSR Eastleigh Works
Build date19261929
Total produced16
Specifications
Configuration:
   Whyte 4-6-0
   UIC 2′C h4
Gauge 4 ft 8+12 in (1,435 mm) standard gauge
Leading dia. 3 ft 1 in (0.940 m)
Driver dia.6 ft 7 in (2.007 m)
6 ft 3 in (1.905 m) (one-off modification on E859)
Length69 ft 9+34 in (21.3 m)
Loco weight83 long tons 10 cwt (187,000 lb or 84.8 t)
Tender weight57 long tons 19 cwt (129,800 lb or 58.9 t)
Fuel type Coal
Fuel capacity5  long tons  0 cwt (11,200 lb or 5.1 t) (5.6 short tons)
Water cap.5,000 imp gal (23,000 L; 6,000 US gal)
Firebox:
  Grate area33 sq ft (3.1 m2)
Boiler pressure220 lbf/in2 (1.52 MPa)
Cylinders Four
Cylinder size 16+12 in × 26 in (419 mm × 660 mm)
Performance figures
Tractive effort 33,510 lbf (149.06 kN)
35,298 lbf (157.01 kN) (E859 w/6 ft 3 in. driving wheels)
Career
Operators
Power classBR: 7P
NumbersSR:850-865, BR:30850-30865
Locale Great Britain
Withdrawn1961–1962
Preserved850 Lord Nelson
DispositionOne preserved, remainder scrapped

The SR class LN or Lord Nelson class is a type of 4-cylinder 4-6-0 steam locomotive designed for the Southern Railway by Richard Maunsell in 1926. They were intended for Continental boat trains between London (Victoria) and Dover harbour, but were also later used for express passenger work to the South-West of England. Sixteen of them were constructed, representing the most powerful (although not the most successful) Southern 4-6-0 design. They were all named after famous admirals. [2]

Contents

The class continued to operate with British Railways until withdrawn during 1961 and 1962. Only one example of the class – the first engine, Lord Nelson itself – has been saved from scrapping. This has been seen running on mainline tours and preserved railways throughout Britain.

Background

Although the improved ”King Arthur” class 4-6-0 locomotives were capable of the heaviest express passenger work between London and South West England, there was a growth in demand for Continental traffic travelling via Dover and Folkestone. By the mid-1920s the Southern Railway Traffic Department wished to begin operating 500-long-ton (510 t; 560-short-ton) express trains on these routes during peak periods. These would require a more powerful locomotive, able to pull heavier loads at sustained speeds of 55 mph (89 km/h), so as not to impede the congested electrified lines around London. However, any enlargement of the existing 2-cylinder design was not possible due to weight restrictions imposed by the railway's Civil Engineer. [3] [4] [5]

After examining the practice of other British railways, Richard Maunsell, the Chief Mechanical Engineer, secured agreement for a 4-cylinder design, with an improved boiler and Belpaire firebox. The drive would be divided between the front coupled axle for the inside cylinders and the middle coupled axle for the outside cylinders giving better weight distribution and reduced hammer blow. [6] The new design was an inevitable compromise between the need for additional power and to keep the weight down to an acceptable limit.[ citation needed ]

There were two unusual features of the design: the first of which was the setting of the crank axles at 135°, rather than the standard 90° of other locomotive types. This design necessitated four sets of valve gear, and gave rise to eight beats per revolution, rather than the usual four, designed to give a more even draw on the fire and less chance of wheelslip when starting. The second difference was that fire grate was in two sections, the rear portion was horizontal and the front sloped away sharply. [7]

Construction history

The prototype E850 named Lord Nelson was ordered from Eastleigh railway works in June 1925 but production proceeded slowly, at Maunsell's insistence, to ensure that the weight was kept to a minimum at every stage, [8] so the locomotive did not appear until August 1926. It was tested on a variety of duties over the next year, with sufficiently encouraging results for an initial order for ten more locomotives for delivery between May 1928 and April 1929 to be placed. [7] These were originally scheduled to be allocated to Battersea depot and fitted with 4,000 gallon 6-wheeled tenders suitable for the Continental ports. However, during construction, it was decided to equip half of the class with 5,000 gallon 8-wheeled tenders necessary for the longer West of England routes and to allocate them to Nine Elms depot. A further batch of ten locomotives was ordered in 1928, before the previous batch had been delivered, but when it became apparent that the Stock Market Crash of 1929 would be likely to reduce the demand for Continental travel, this second order was reduced to five. [9]

Naming the locomotives

The locomotives were all named after famous Royal Navy admirals, with the doyen of the class being named Lord Nelson. As a result, the rest of the locomotives belonged to the Lord Nelson (LN) class. [10]

Modifications

The performance of the new locomotives was mixed, depending upon the experience of the crew and the circumstances under which they were operating. At times it was no better than their smaller predecessors. Maunsell therefore undertook a number of experiments to try to improve the performance of the new locomotives. No. E859 was fitted with smaller 6 ft 3 in (1.905 m) driving wheels to see if this would improve performance over the heavily graded London-Dover line, but the difference was marginal. No. E860 was fitted with a longer, heavier boiler but once again with little improvement. The whole class however benefitted from the fitting of smoke deflectors during the late 1920s.[ citation needed ]

Maunsell was aware of the reputation for poor steaming enjoyed by the class and attempted to address it by the fitting of twin Kylchap blastpipes to No. 860 in 1934. [11] However, the problem was ultimately solved by Oliver Bulleid, Maunsell's replacement as Chief Mechanical Engineer of the Southern in 1938. He fitted larger diameter chimneys and Lemaître multiple jet blastpipes, which effectively transformed their performance. [1] Thereafter the class was highly respected.[ citation needed ]

Operational details

30860 Lord Hawke at Basingstoke in 1959. Basingstoke Bournemouth - Birkenhead express geograph-2680904-by-Ben-Brooksbank.jpg
30860 Lord Hawke at Basingstoke in 1959.
851 Sir Francis Drake SR Lord Nelson class, 851 Sir Francis Drake (CJ Allen, Steel Highway, 1928).jpg
851 Sir Francis Drake

For a period after its introduction to the Southern Railway network, the Lord Nelson class held the title of "most powerful locomotive in Britain" – a claim based on its tractive effort. [12] The advanced design of the locomotive led to the GWR introducing the GWR 6000 Class in order to regain the title lost by their GWR 4073 Class locomotives when the Lord Nelsons were constructed. [1] The planned 500-ton trains never materialised, but the class was regularly used on 460 ton trains such as the Golden Arrow. After the Second World War they were also frequently used on heavily laden Boat Trains between London Waterloo station and Southampton docks. [13]

The Lord Nelsons were notoriously difficult for inexperienced crews to fire properly, due to their long firebox, [14] and specific crews who had proven experience in firing the locomotives were therefore allocated to them. [15] This was due to the relatively few locomotives in the class for crews to train on. [12] The LMS Royal Scot Class was loosely based on this design. [16]

Accidents and incidents

Withdrawal

The class was gradually superseded on top link expresses during the 1940s by growing numbers of Bulleid Pacifics, [12] although throughout the 1950s they were frequently called upon during peak periods or to deputise for failures. [22] [ page needed ] The rebuilding of the Pacifics in the late 1950s and their subsequent increased reliability rendered the Lord Nelson surplus to operational requirements, and they were gradually phased out of service. [23] The entire class was withdrawn during 1961 and 1962. [1]

Livery and numbering

Southern Railway

The Lord Nelson class was initially painted in Maunsell lined olive green, which later changed to a lighter shade in the mid-1930s. From 1938, some of the locomotives were painted in a semi-matt Malachite Green finish when Bulleid replaced Maunsell as CME of the Southern. During the war years, the locomotives were painted in wartime black livery, though retained the word "Southern" in yellow on the tender. [24] After the war, the livery was reverted to the Southern Railway Malachite Green standard with "Sunshine Yellow" lining on the boiler rings.[ citation needed ]

Numbers allocated to the locomotives were a variation of LSWR practice and, being constructed at Eastleigh, were given the prefix "E" before the number to distinguish from the locomotives of other pre-grouping railway companies that also carried the same number. [25] In the case of the Lord Nelson class the numbering ranged from E850 to E865. This was eventually superseded by numbers without the "E" prefix, becoming 850 to 865 from 1931. [26]

Post-1948 (nationalisation)

The initial livery applied following the nationalisation of the railways in 1948 was modified Southern malachite green and sunshine yellow with "British Railways" on the tender, and the Southern numbering system was temporarily retained with an "S" prefix (such as S850) until superseded by the British Railways numbering system. [27] The locomotives then carried British Railways Brunswick green livery with orange and black lining. [28] By this stage the locomotives were renumbered under standard British Railways procedure, from 30850 to 30865. [29]

Preservation

850 Lord Nelson at Minehead, WSR in 2006 SR 850 Lord Nelson.jpg
850 Lord Nelson at Minehead, WSR in 2006

The only survivor, first-of-class (30)850 Lord Nelson, has been preserved as part of the National Railway Collection, and has run on the national rail network. [30] [31] As of 2020 it is based on the Mid-Hants Railway. Its boiler certificate expired in 2015. It is now stored awaiting overhaul. [32]

See also

Related Research Articles

<span class="mw-page-title-main">Southern Railway (UK)</span> British "Big 4" railway company, active 1923–1947

The Southern Railway (SR), sometimes shortened to 'Southern', was a British railway company established in the 1923 Grouping. It linked London with the Channel ports, South West England, South coast resorts and Kent. The railway was formed by the amalgamation of several smaller railway companies, the largest of which were the London and South Western Railway (LSWR), the London, Brighton and South Coast Railway (LB&SCR) and the South Eastern and Chatham Railway (SE&CR). The construction of what was to become the Southern Railway began in 1838 with the opening of the London and Southampton Railway, which was renamed the London & South Western Railway.

<span class="mw-page-title-main">SR Z class</span>

The SR Z class was an 0-8-0T 3-cylinder tank engine designed by Richard Maunsell and intended for heavy shunting on the Southern Railway, the first eight entering into service in 1929. It was a successful design and would have been built in greater numbers, but an order for a further ten was cancelled in 1930 due to the reduction in freight traffic as a result of the Great Depression.

<span class="mw-page-title-main">LSWR H15 class</span>

The LSWR/SR H15 class was a class of 2-cylinder 4-6-0 steam locomotives designed by Robert Urie for mixed-traffic duties on the LSWR. Further batches were constructed by Richard Maunsell for the Southern Railway after 1923. They were given the nickname of "Junior King Arthur" due to the size of their driving wheels, the S15 and their N15 cousins had driving wheels which had a diameter of 5 foot and 7 inches and 6 foot and 7 inches respectively.

The SR N15X class or Remembrance class were a design of British 4-6-0 steam locomotives converted in 1934 by Richard Maunsell of the Southern Railway from the large LB&SCR L class 4-6-4 tank locomotives that had become redundant on the London–Brighton line following electrification. It was hoped that further service could be obtained from these locomotives on the Southern's Western Section, sharing the duties of the N15 class locomotives. The locomotives were named after famous Victorian engineers except for Remembrance, which was the LBSCR's memorial locomotive for staff members who died in the First World War.

<span class="mw-page-title-main">LSWR N15 class</span> Class of 74 two-cylinder 4-6-0 locomotives

The LSWR N15 class was a British 2–cylinder 4-6-0 express passenger steam locomotive designed by Robert Urie. The class has a complex build history spanning three sub-classes and ten years of construction from 1918 to 1927. The first batch of the class was constructed for the London and South Western Railway (LSWR), where they hauled heavy express passenger trains to the south coast ports and further west to Exeter. After the Lord Nelsons, they were the second biggest 4-6-0 passenger locomotives on the Southern Railway. They could reach speeds of up to 90 mph (145 km/h).

<span class="mw-page-title-main">SR Q1 class</span> Class of 0-6-0 freight engines designed by Oliver Bulleid

The SR Q1 class is a type of austerity steam locomotive constructed during the Second World War. The class was designed by Oliver Bulleid for use on the intensive freight turns experienced during wartime on the Southern Railway network. A total of 40 locomotives were built. Bulleid incorporated many innovations and weight-saving concepts to produce a highly functional design. The class lasted in service until July 1966, and the first member of the class, number C1, has been preserved by the National Railway Museum.

<span class="mw-page-title-main">SR V class</span> Class of 40 three-cylinder 4-4-0 locomotives

The SR V class, more commonly known as the Schools class, is a class of steam locomotive designed by Richard Maunsell for the Southern Railway. The class was a cut down version of his Lord Nelson class but also incorporated components from Urie and Maunsell's LSWR/SR King Arthur class. It was the last locomotive in Britain to be designed with a 4-4-0 wheel arrangement, and was the most powerful class of 4-4-0 ever produced in Europe. All 40 of the class were named after English public schools, and were designed to provide a powerful class of intermediate express passenger locomotive on semi-fast services for lines which could cope with high axle loads but some of which had short turntables.

<span class="mw-page-title-main">SR U class</span> Class of 50 two-cylinder 2-6-0 locomotives

The SR U class are 2-6-0 steam locomotives designed by Richard Maunsell for passenger duties on the Southern Railway (SR). The class represented the penultimate stage in the development of the Southern Railway's 2-6-0 "family", which improved upon the basic principles established by GWR Chief Mechanical Engineer (CME) George Jackson Churchward for Great Western Railway (GWR) locomotives. The U class design drew from experience with the GWR 4300s and N classes, improved by applying Midland Railway ideas to the design, enabling the SECR to influence development of the 2-6-0 in Britain.

<span class="mw-page-title-main">LSWR S15 class</span> British 2-cylinder 4-6-0 steam locomotive

The LSWR S15 class is a British 2-cylinder 4-6-0 freight steam locomotive designed by Robert W. Urie, based on his H15 class and N15 class locomotives. The class had a complex build history, spanning several years of construction from 1920 to 1936. The first examples were constructed for the London and South Western Railway (LSWR), where they hauled freight trains to the south coast ports and further west to Exeter, as well as occasional passenger work in conjunction with their larger-wheeled N15 class counterparts.

<span class="mw-page-title-main">SR Q class</span> Class of 20 two-cylinder 0-6-0 steam locomotives

The Q Class is a type of 0-6-0 steam locomotive designed by Richard Maunsell of the Southern Railway and constructed immediately prior to the Second World War for use on medium-distance freight trains throughout the network. Twenty locomotives were built by Maunsell's successor, Oliver Bulleid, in 1938. The design was relatively old-fashioned and the class was soon afterwards eclipsed by Bulleid's own more powerful Q1 class. Nevertheless the locomotives performed adequately and reliably on the tasks for which they had been designed, until their withdrawal in 1965. Only one has survived, and is preserved on the Bluebell Railway.

<span class="mw-page-title-main">LSWR L12 class</span>

The London and South Western Railway L12 class was a class of 20 4-4-0 steam locomotives designed for express passenger work by Dugald Drummond. They were introduced to the London and South Western Railway network in 1904. Despite the class being an unremarkable continuation of the Drummond lineage, one member was involved in the infamous Salisbury rail crash in June 1906. None of the class survived into preservation after their brief career in British Railways ownership.

<span class="mw-page-title-main">SECR N class</span> Class of English steam locomotives

The SECR N class was a type of 2-6-0 ("mogul") steam locomotive designed in 1914 by Richard Maunsell for mixed-traffic duties on the South Eastern and Chatham Railway (SECR). Built between 1917 and 1934, it was the first non-Great Western Railway (GWR) type to use and improve upon the basic design principles established by GWR Chief Mechanical Engineer (CME) George Jackson Churchward. The N class was based on the GWR 4300 Class design, improved with Midland Railway concepts.

<span class="mw-page-title-main">LSWR T9 class</span>

The London and South Western Railway T9 class is a class of 66 4-4-0 steam locomotive designed for express passenger work by Dugald Drummond and introduced to services on the LSWR in 1899. One example has been preserved after British Railways ownership. They were given the nickname of "Greyhounds" due to their speed, up to 85 miles per hour (137 km/h), and reliability.

<span class="mw-page-title-main">SECR N1 class</span> Class of 6 three-cylinder 2-6-0 locomotives

The SECR N1 class was a type of 3-cylinder 2-6-0 ('mogul') steam locomotive designed by Richard Maunsell for mixed traffic duties, initially on the South Eastern and Chatham Railway (SECR), and later operated for the Southern Railway (SR). The N1 was a development of the basic principles established by the Great Western Railway's (GWR) Chief Mechanical Engineer (CME) George Jackson Churchward and by Maunsell's previous N class design.

<span class="mw-page-title-main">LSWR S11 class</span>

The LSWR Class S11 was a class of 10 4-4-0 steam locomotives designed for express passenger work by Dugald Drummond. They were introduced to services on the London and South Western Railway in 1903. None of the class survived into preservation after their brief career in British Railways ownership.

<span class="mw-page-title-main">LSWR T14 class</span>

The LSWR Class T14 was a class of ten 4-6-0 locomotives designed by Dugald Drummond for express passenger use on the London and South Western Railway and constructed at Eastleigh in 1911–12.

<span class="mw-page-title-main">LSWR D15 class</span>

The LSWR D15 class 4-4-0 was the last steam locomotive design by Dugald Drummond for the London and South Western Railway in 1912. By 1912, Dugald Drummond had built several classes of unsuccessful 4-6-0 express passenger locomotives. The result of these failures was that when he designed what was to be his last class in 1911, a new 4-4-0 design emerged from Eastleigh Works in February 1912, with what was to be the first of his D15 class.

<span class="mw-page-title-main">SECR K and SR K1 classes</span> Two classes of 20 two-cylinder (K) and 1 three-cylinder (K1) 2-6-4T locomotives

The SECR K class was a type of 2-6-4 tank locomotive designed in 1914 by Richard Maunsell for express passenger duties on the South Eastern and Chatham Railway (SECR), which operated between London and south-east England. The Southern Railway (SR) K1 class was a three-cylinder variant of the K class, designed in 1925 to suit a narrower loading gauge. They were among the first non-Great Western Railway (GWR) types to use and improve upon the basic design principles of power and standardisation established by GWR Chief Mechanical Engineer (CME) George Jackson Churchward. The locomotives were based on the GWR 4300 class, improved by the Midland Railway's ideals of simplicity and ease of maintenance.

<span class="mw-page-title-main">SR Merchant Navy class</span> Class of 30 three-cylinder 4-6-2 locomotives

The SR Merchant Navy class is a class of air-smoothed 4-6-2 (Pacific) steam locomotives designed for the Southern Railway by Oliver Bulleid. The Pacific design was chosen in preference to several others proposed by Bulleid. The first members of the class were constructed during the Second World War, and the last of the 30 locomotives in 1949.

SR Lord Nelson Class 850 <i>Lord Nelson</i>

Southern Railway (SR) No. 850 Lord Nelson is a preserved British steam locomotive of the Lord Nelson class. It forms part of the United Kingdom's National Railway Collection.

References

Notes

  1. 1 2 3 4 Herring 2000, pp. 110–111.
  2. Hillier-Graves, Tim (2020). Southern Railway, Lord Nelson Class 4-6-0s Their Design and Development. Pen & Sword Books Limited. ISBN   978-1-5267-4474-6. OCLC   1202458524.
  3. "SR Maunsell "Lord Nelson" class 4-6-0". Southern Railway E-mail Group. Retrieved 18 September 2022.
  4. "Britain's Most Powerful Loco - Railway Wonders of the World". www.railwaywondersoftheworld.com. Retrieved 18 September 2022.
  5. Maggs, Colin (2017). A History of the Southern Railway. Amberley Publishing. ISBN   9781445652719.
  6. Bradley 1975, pp. 2–3.
  7. 1 2 Bradley 1975, pp. 3 & 9.
  8. Bradley 1975, p. 3.
  9. Bradley 1975, p. 6.
  10. Burridge 1975, pp. 54–55.
  11. Bradley 1975, p. 13.
  12. 1 2 3 Whitehouse & Thomas 2002, p. 47.
  13. "Southern Railway Express 4-6-0 - Wonders of World Engineering". wondersofworldengineering.com. Retrieved 18 September 2022.
  14. Swift 2007, pp. 9–10.
  15. Sawford 2007, p. 30.
  16. "Maunsell "Lord Nelson" class 4-6-0". Southern E-Group. 2004. Archived from the original on 8 January 2008. Retrieved 3 May 2007. For information on influence.
  17. Anderson, Introduction
  18. 1 2 Bishop 1984, pp. 21, 42–47.
  19. Bradley 1975, p. 17.
  20. 1 2 Bradley 1975, p. 18.
  21. Hoole 1982, p. 37.
  22. Townroe, section: "Lord Nelson class"
  23. Swift 2007, p. 59.
  24. Swift 2007, p. 40.
  25. Swift 2007, p. 39.
  26. "Newsletter No. 5". Maunsell Locomotive Society. February 1979. Archived from the original on 7 February 2012. Retrieved 16 May 2007. For information on the "E" numbering system.
  27. Scott-Morgan 2002, p. 44.
  28. Scott-Morgan 2002, p. 43.
  29. "SR Maunsell "LN" Class 4-6-0". BRDatabase, Complete BR Locomotive Database 1948-1997. Retrieved 14 May 2022.
  30. "Southern Railway "Lord Nelson" | Science Museum Group Collection". collection.sciencemuseumgroup.org.uk. Retrieved 18 September 2022.
  31. "850 - SR Lord Nelson Class 'Lord Nelson' - Watercress Line". 29 April 2021. Retrieved 18 September 2022.
  32. "30850 Lord Nelson (SR E850, SR 850 & BR 30850)". Preserved British Steam. Retrieved 14 May 2022.

Bibliography

  • Anderson, E.P. (1930). "Report on the partial derailment of the engine of an express passenger train that occurred on the 23rd January, near Kent House"; Ministry of Transport: Railway accidents ... which occurred during the three months ending 31 March 1930. London: HMSO.
  • Bishop, Bill (1984). Off the Rails. Southampton: Kingfisher. ISBN   0 946184 06 2.
  • Bradley, D.L. (1975). Locomotives of the Southern Railway. Part 1. London: Railway Correspondence and Travel Society.
  • Burridge, Frank (1975). Nameplates of the Big Four. Oxford: Oxford Publishing Company. ISBN   0-902888-43-9.
  • Hardingham, Roger (2009). 850 Lord Nelson - flagship of the Southern Railway. York: FNRM Enterprises. ISBN   978-0-9546685-9-4.
  • Haresnape, Brian (1977). Maunsell Locomotives - a pictorial history. Ian Allan Ltd.
  • Herring, Peter (2000). Classic British Steam Locomotives. London: Abbeydale Press. ISBN   1-86147-057-6.
  • Hoole, Ken (1982). Trains in Trouble: Vol. 3. Redruth: Atlantic Books. p. 30. ISBN   0-906899-05-2.
  • Ian Allan ABC of British Railways Locomotives (Winter 1958–59 ed.).
  • Sawford, Eric (2007). Southern Steam in Retrospect. Stroud: Alan Sutton. ISBN   978-0-7509-4627-8.
  • Scott-Morgan, John (2002). Maunsell Locomotives. Hinckley: Ian Allan Publishing. ISBN   0-7110-2872-9.
  • Swift, Peter (2007). Maunsell 4-6-0 Lord Nelson Class. Locomotives in Detail. Vol. 8. Hinckley: Ian Allan Publishing. ISBN   0-7110-3247-5.
  • Townroe, S.C. (1973). 'Arthurs', 'Nelsons' & 'Schools' at work. London: Ian Allan.
  • Whitehouse, Patrick; Thomas, David St. John (2002). SR 150: A Century and a Half of the Southern Railway. Newton Abbot: David and Charles. ISBN   0-7153-9148-8.