LSWR H15 class [1] [ page needed ] | |||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| |||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||
|
The LSWR/SR H15 class was a class of 2-cylinder 4-6-0 steam locomotives designed by Robert Urie for mixed-traffic duties on the LSWR. Further batches were constructed by Richard Maunsell for the Southern Railway after 1923. They were given the nickname of "Junior King Arthur" due to the size of their driving wheels, the S15 and their N15 cousins had driving wheels which had a diameter of 5 foot and 7 inches and 6 foot and 7 inches respectively. [2]
The H15 class represented Robert Urie's first design for the LSWR. It was created in response to a desperate lack of adequate locomotives in service on the LSWR that could be utilised for heavy freight duties. Reliability was also an issue, with ageing locomotive designs taking their toll on the LSWR's resources. [1] [ page needed ]
The resultant design was an outside 2-cylinder locomotive fitted with outside Walschaerts valve gear for ease of maintenance, with all the working parts relatively accessible when compared to previous designs operating on the LSWR system. [3] [ page needed ]
Ten locomotives (numbers 482–491) were built new by Eastleigh Works with 180 lbf/in2 (1.24 MPa) boilers. They appeared in January to July 1914. Urie was a proponent of superheating, [4] so in order to gain experience and data on performance and fuel economy, four of the locomotives (482–485) were fitted with Schmidt superheaters, four (486–489) with Robinson superheaters, and two (490–491) were built as saturated locomotives. [5] The last two had a lower weight than the first eight.
While the data gained from this small experiment showed the benefits of superheating, [6] neither design of superheater was deemed suitable by Urie, so he designed and patented his own: the Eastleigh superheater, [4] [6] which was subsequently fitted to all members of the H15 class. [7]
An additional locomotive was a rebuild of the 1905 E14 class No. 335 undertaken in December 1914. The locomotive had been scheduled for major modifications by Urie's predecessor Dugald Drummond in the light of poor operational performance. [3] [ page needed ] Urie, instead of modifying it, rebuilt it as the eleventh member of the H15 class. [1] [ page needed ] It was the first locomotive to be fitted with an Eastleigh superheater, but it retained its original boiler pressure of 175 lbf/in2 (1.21 MPa). [8]
However, improvements were made to the overall design whilst the locomotive was under production at Eastleigh Works. The earlier class members mounted a lower running plate that was raised above the cylinders for clearance. [3] [ page needed ] These locomotives also sported a single, straight splasher above the driving wheels, an embellishment that would feature on Urie's later N15 class. The later production locomotives did not feature this design, with a higher-mounted straight running plate above the driving wheels, a feature that was perpetuated on the later S15 class design by Urie. [3] [ page needed ]
A total of 26 locomotives were completed in six batches, including number 335, over a period of twelve years. The first two batches of five in each were constructed in 1914. A further fifteen locomotives were constructed in three consecutive batches during 1924, the final one appearing in January 1925, and these were constructed under the auspices of Richard Maunsell, Urie's successor. Amongst the final batches of the class was another rebuild project concerning five members of the Drummond F13 Class. Maunsell's own batch of ten locomotives were a continuation of the design set out by Urie with number 491.
Year | Order | Quantity | LSWR/SR numbers | Notes |
---|---|---|---|---|
1914 | H15 | 5 | 482, 483, 485–487 | |
1914 | K15 | 5 | 484, 488–491 | |
1914 | — | 1 | 335 | rebuilt from E14 class |
1924 | R16 | 5 | 473–477 | |
1924 | T16 | 5 | 478, 521–524 | |
1924 | A17 | 5 | 330–334 | F13 class rebuilds |
The class was provided with a 5,000 gallon Drummond 'watercart' eight-wheeled tender design that enabled them to travel on the long distances of the LSWR network which never had water troughs. Further modifications to the class were made by Maunsell during the mid-1930s with the provision of smoke deflectors.
With their 21 × 28 inch cylinders allied with 6 ft 0 in driving wheels and a free-steaming boiler, they proved to be very capable of handling heavy trains. General overhauls revealed that they were very well built. When 30487 was stripped down for general repairs in 1954, it was found that the frames showed little sign of forty years of regular use. During their careers they were used on fast, heavy freights, and were particularly familiar around Okehampton hauling stone trains. [1] [ page needed ]
The Drummond F13 rebuild were notable for having very tall cabs, requiring footplate staff shorter than 6 foot in height to stand on improvised stools to reach some controls. This resulted in those class members with this feature being nicknamed 'Cathedrals'. This nickname does not seem to have been applied to the rest of the class, although crews from Guildford depot referred to the others as the 'City Breed'. [1] [ page needed ] All members of the class had been withdrawn by 1961 as a result of the BR 1955 Modernisation Plan, and no locomotives survived into preservation.
Livery was initially LSWR Drummond Lined Passenger Green livery, this being complemented by purple-brown edging and double yellow lining. The initials 'LSWR' were located on the tender, and the number was placed on the cabside.
The first Southern livery, as displayed by the 1924 batch, continued that of the LSWR, though with the number displayed on the tender. However, from 1925, a darker Olive-type green was substituted, and the entire class was so outshopped. [12] [ page needed ] Wheels were green with black tyres. Primrose Yellow 'Southern' and locomotive number transfers were placed on the tender tank. [12] [ page needed ]
By 1939, after Oliver Bulleid's appointment as Chief Mechanical Engineer, the locomotives had been outshopped in an unlined black livery to denote their freight status subject to livery experimentation. 'Southern' remained on the tender, though the number transfer was moved to the cabside, both in 'Sunshine Yellow' lettering. [12] [ page needed ] During wartime service, a further modification to the livery was made with a green shading on the 'Sunshine' lettering. The final Southern livery reverted to 'Sunshine Yellow' lettering and numbering.
The first two batches of five were numbered 482–491. The later batches received the numbers 521–524, 330–334 (F13 rebuilds) and 473–478, and the final member was number E14 rebuild 335, which provided the basis for the entire class.
The class was given the BR Power Classification of 4P5F. Livery immediately after Nationalisation was transitional, with 'British Railways' on the tender in Southern Yellow. Numbers were initially given an 'S' prefix. From the early 1950s the class was given the new BR mixed traffic Black with red/white lining. [13] [ page needed ]
The class was numbered according to the BR Standard Numbering System, given the series 30482–30491; 30521–30524; 30330–30334 (F13 rebuilds) and finally 30473–30478. [13] [ page needed ]
Year | Quantity in service at start of year | Quantity withdrawn | Locomotive numbers | Notes |
---|---|---|---|---|
1955 | 26 | 2 | 30485/90 | 30485 accident damage |
1956 | 24 | 1 | 30332 | |
1957 | 23 | 3 | 30330, 30483/87 | |
1958 | 20 | 2 | 30333–34 | |
1959 | 18 | 8 | 30335, 30473/77–78/82/84/86/88 | |
1960 | 10 | 1 | 30474 | |
1961 | 9 | 9 | 30331, 30475–76/89/91, 30521–30524 |
The SR Class W were 3-cylinder 2-6-4T tank engines designed in 1929 by Richard Maunsell for use on the Southern Railway. They were introduced in 1932 and constructed at Eastleigh and Ashford. The class was intended for short distance, inter-company/regional freight traffic transfer in London, and were standardised with parts from the N, N1, U and U1 classes.
The SR N15X class or Remembrance class were a design of British 4-6-0 steam locomotives converted in 1934 by Richard Maunsell of the Southern Railway from the large LB&SCR L class 4-6-4 tank locomotives that had become redundant on the London–Brighton line following electrification. It was hoped that further service could be obtained from these locomotives on the Southern's Western Section, sharing the duties of the N15 class locomotives. The locomotives were named after famous Victorian engineers except for Remembrance, which was the LBSCR's memorial locomotive for staff members who died in the First World War.
The LSWR N15 class was a British 2–cylinder 4-6-0 express passenger steam locomotive designed by Robert Urie. The class has a complex build history spanning three sub-classes and ten years of construction from 1918 to 1927. The first batch of the class was constructed for the London and South Western Railway (LSWR), where they hauled heavy express passenger trains to the south coast ports and further west to Exeter. After the Lord Nelsons, they were the second biggest 4-6-0 passenger locomotives on the Southern Railway. They could reach speeds of up to 90 mph (145 km/h).
The SR V class, more commonly known as the Schools class, is a class of steam locomotive designed by Richard Maunsell for the Southern Railway. The class was a cut down version of his Lord Nelson class but also incorporated components from Urie and Maunsell's LSWR/SR King Arthur class. It was the last locomotive in Britain to be designed with a 4-4-0 wheel arrangement, and was the most powerful class of 4-4-0 ever produced in Europe. All 40 of the class were named after English public schools, and were designed to provide a powerful class of intermediate express passenger locomotive on semi-fast services for lines which could cope with high axle loads but some of which had short turntables.
The LSWR S15 class is a British 2-cylinder 4-6-0 freight steam locomotive designed by Robert W. Urie, based on his H15 class and N15 class locomotives. The class had a complex build history, spanning several years of construction from 1920 to 1936. The first examples were constructed for the London and South Western Railway (LSWR), where they hauled freight trains to the south coast ports and further west to Exeter, as well as occasional passenger work in conjunction with their larger-wheeled N15 class counterparts.
The London and South Western Railway L11 class was a class of 4-4-0 steam locomotives designed for mixed traffic work. They were introduced in 1903 and were nicknamed "Large Hoppers". As with most other Drummond productions, the locomotive had two inside cylinders and Stephenson link valve gear.
The London and South Western Railway L12 class was a class of 20 4-4-0 steam locomotives designed for express passenger work by Dugald Drummond. They were introduced to the London and South Western Railway network in 1904. Despite the class being an unremarkable continuation of the Drummond lineage, one member was involved in the infamous Salisbury rail crash in June 1906. None of the class survived into preservation after their brief career in British Railways ownership.
The SECR N class was a type of 2-6-0 ("mogul") steam locomotive designed in 1914 by Richard Maunsell for mixed-traffic duties on the South Eastern and Chatham Railway (SECR). Built between 1917 and 1934, it was the first non-Great Western Railway (GWR) type to use and improve upon the basic design principles established by GWR Chief Mechanical Engineer (CME) George Jackson Churchward. The N class was based on the GWR 4300 Class design, improved with Midland Railway concepts.
Robert Wallace Urie was a Scottish locomotive engineer who was the last chief mechanical engineer of the London and South Western Railway.
The London and South Western Railway T9 class is a class of 66 4-4-0 steam locomotive designed for express passenger work by Dugald Drummond and introduced to services on the LSWR in 1899. One example has been preserved after British Railways ownership. They were given the nickname of "Greyhounds" due to their speed, up to 85 miles per hour (137 km/h), and reliability.
The LSWR 415 class is a 4-4-2T steam tank locomotive, with the trailing wheels forming the basis of its "Radial Tank" moniker. It was designed by William Adams and introduced in 1882 for service on the London and South Western Railway (LSWR).
The LSWR Class S11 was a class of 10 4-4-0 steam locomotives designed for express passenger work by Dugald Drummond. They were introduced to services on the London and South Western Railway in 1903. None of the class survived into preservation after their brief career in British Railways ownership.
The London and South Western Railway F13 class was a class of 4-6-0 locomotives designed by Dugald Drummond for the London and South Western Railway (LSWR).
The LSWR Class T14 was a class of ten 4-6-0 locomotives designed by Dugald Drummond for express passenger use on the London and South Western Railway and constructed at Eastleigh in 1911–12.
The LSWR E14 Class was a class of 4-6-0 locomotive designed by Dugald Drummond for the London and South Western Railway.
The LSWR G14 class was a class of 4-6-0 locomotive designed by Dugald Drummond for the London and South Western Railway.
The LSWR P14 class was a class of 4-6-0 locomotive designed by Dugald Drummond for the London and South Western Railway.
The LSWR D15 class 4-4-0 was the last steam locomotive design by Dugald Drummond for the London and South Western Railway in 1912. By 1912, Dugald Drummond had built several classes of unsuccessful 4-6-0 express passenger locomotives. The result of these failures was that when he designed what was to be his last class in 1911, a new 4-4-0 design emerged from Eastleigh Works in February 1912, with what was to be the first of his D15 class.
The LSWR G16 class was a class of steam tank locomotives with a 4-8-0T wheel arrangement. It was designed by Robert Urie and introduced in 1921 specifically for heavy shunting over humps at Feltham marshalling yard, on the London and South Western Railway (LSWR). They were based upon Urie's previous S15 class freight design, and apart from several periods of operating elsewhere on the LSWR and Southern railway network, they remained at Feltham for most of their operational careers.
The SECR K class was a type of 2-6-4 tank locomotive designed in 1914 by Richard Maunsell for express passenger duties on the South Eastern and Chatham Railway (SECR), which operated between London and south-east England. The Southern Railway (SR) K1 class was a three-cylinder variant of the K class, designed in 1925 to suit a narrower loading gauge. They were among the first non-Great Western Railway (GWR) types to use and improve upon the basic design principles of power and standardisation established by GWR Chief Mechanical Engineer (CME) George Jackson Churchward. The locomotives were based on the GWR 4300 class, improved by the Midland Railway's ideals of simplicity and ease of maintenance.