SR Q class

Last updated

SR Q class [1]
Hugh llewelyn 30541 (7865329282).jpg
30541 at Guildford shed, 1963
Type and origin
Power typeSteam
Designer Richard Maunsell
BuilderSR Eastleigh Works
Build date1938–1939
Total produced20
Specifications
Configuration:
​
 •  Whyte 0-6-0
 •  UIC C h2
Gauge 4 ft 8+1⁄2 in (1,435 mm) standard gauge
Driver dia.5 ft 1 in (1.549 m)
Length53 ft 9+1⁄2 in (16.40 m)
Width8 ft 4 in (2.54 m)
Height12 ft 10 in (3.91 m)
Loco weight49 long tons 10 cwt (110,900 lb or 50.3 t) (55 short tons)
Tender weight40 long tons 10 cwt (90,700 lb or 41.1 t) (45 short tons)
Total weight90 long tons 0 cwt (201,600 lb or 91.4 t) (101 short tons)
Fuel type Coal
Fuel capacity5 long tons (5.1 tonnes; 5.6 short tons)
Water cap.3,500 or 4,000 imp gal (15,900 or 18,200 l; 4,200 or 4,800 US gal)
Boiler pressure200  lbf/in2 (13.79  bar; 1.38  MPa)
Cylinders Two, inside
Cylinder size 19 in × 26 in (483 mm × 660 mm)
Performance figures
Tractive effort 26,160  lbf (116.37  kN)
Career
Operators
Class SR: Q
Power classBR: 4F
Numbers
  • SR: 530–549
  • BR: 30530–30549
Locale Southern Region
Withdrawn1962–1965
DispositionOne preserved, remainder scrapped

The Q Class is a type of 0-6-0 steam locomotive designed by Richard Maunsell of the Southern Railway and constructed immediately prior to the Second World War for use on medium-distance freight trains throughout the network. Twenty locomotives were built by Maunsell's successor, Oliver Bulleid, in 1938. The design was relatively old-fashioned and the class was soon afterwards eclipsed by Bulleid's own more powerful Q1 class. Nevertheless the locomotives performed adequately and reliably on the tasks for which they had been designed, until their withdrawal in 1965. Only one has survived, and is preserved on the Bluebell Railway.

Contents

Background

The Southern Railway was primarily a passenger-carrying railway which used most of its resources to extend its electrified lines. There was a continuing need for steam freight locomotives however, although the Traffic Department preferred mixed-traffic designs which could also haul passenger trains on the remaining non-electrified lines at peak periods. By the late 1930s, the Southern Railway was adequately served with powerful mixed traffic locomotives of the S15, N, and N1 classes, but there was a need for a smaller freight locomotive with high route availability that could also undertake light passenger duties. This role had been performed by the ex-LSWR 'Jubilee' A12 0-4-2 , which were approaching the end of their useful lives. [2] [3]

During his last year as the Chief Mechanical Engineer (CME) of the Southern Railway, Richard Maunsell decided on an inside-cylinder 0-6-0 tender locomotive to undertake this role, in what was to become the Q Class of 1938. [4] This was a relatively ‘old-fashioned’ design for the late 1930s, although each of Britain's major railways built locomotives of this pattern until the 1940s. The class nevertheless contained several ‘modern’ features such as a Belpaire firebox, a superheater and a side-window cab. [5] It was the last Southern steam locomotive design before the Second World War, and represented the final design of Maunsell's career, as he retired due to ill-health in 1937.

Construction history

Maunsell's successor, Oliver Bulleid, oversaw the building of twenty members of the class at Eastleigh Works between January 1938 and September 1939. Bulleid is reported to have found the Q class uninspiring, having been manufactured to traditional Victorian principles of locomotive design, and is said to have stated that the order for the Q Class would have been cancelled if he had been appointed CME earlier. [6] However, Bulleid had ample opportunity either to cancel the order or to build and test a single prototype, without incurring the expense of building twenty members of the class, if this was the case. [7]

The class performed adequately and reliably on the tasks for which they were designed, but were less versatile than might have been hoped. When the requirement for modern freight locomotives on the Southern increased during the Second World War, Bulleid was faced with the options of continuing production of the Q Class, or designing a completely new locomotive. Taking the latter option, Bulleid designed what was to become the highly utilitarian SR Class Q1 0-6-0 locomotives. [2]

Modifications

No. 30537 (fitted with Lemaitre blast-pipe and chimney) at Norwood Locomotive Depot 12 March 1960. Norwood Locomotive Depot Q Class geograph-2979640-by-Ben-Brooksbank.jpg
No. 30537 (fitted with Lemaitre blast-pipe and chimney) at Norwood Locomotive Depot 12 March 1960.

In common with most Maunsell designs, the Q Class locomotives were reliable; but there were complaints of poor steaming when used on main-line trains (for which they were never designed). In 1940 Bulleid fitted one member of the class with a Lemaître blast pipe in an attempt to improve efficiency. This proved to be successful and the remainder of the class were so fitted between 1946 and 1949. [7] During the 1950s further experiments were carried out with the fitting of a British Railways Standard Class 4 plain blast pipe and small stovepipe chimney to no. 30549 in 1955, resulting in further improvements in both steaming and fuel consumption; in 1958–61 more received the same blast pipe with a BR Standard Class 4 chimney. [8] [9]

Operational details and preservation

The locomotives were adequate and reliable on secondary services throughout their working lives, their utility compounded by their light weight and steady handling. [1] They were however disappointing on main-line traffic until the draughting was improved after the war. They were fitted with steam carriage heating, and despite being primarily a freight design, periodically deputised in this duty. [2]

British Railways was responsible for the class from 1948 and gave it a 4F power classification, F denoting a freight locomotive in power class 4. [9] Withdrawals from service began during 1962 and were completed by 1965. Loco 30548 served more than 15 years at Bournemouth shed (71B).

Preservation

30541 running round at Sheffield Park 30541 running round at Sheffield Park.jpg
30541 running round at Sheffield Park

The class was not considered sufficiently important for official preservation, and had it not been for Woodham Brothers's scrapyard in Barry, South Wales, no examples would have survived. Only one, number 541 (BR No. 30541), was rescued, and has operated on the Bluebell Railway in Sussex. It is operational in BR Black livery after returning to service in April 2015 (following its absence since 1993).

Livery and numbering

Southern Railway

Due to its primary role as a freight locomotive, the Q Class carried the Southern Black livery. The locomotive number and "Southern" were located on the tender, and were painted in Sunshine Yellow. [10] The numbering of the locomotives under the Southern Railway ranged from 530 to 549. Even though they were built under the tenure of Bulleid, the locomotives never followed his adaptation of the UIC classification system which refers to the number of leading, trailing and driving axles – in this case three. Under this system, this class would have had the prefix "C" before the numbers, such as C30. In the event this form of numbering was applied to Bulleid's Q1 Class locomotives of 1942.

Post-1948 (nationalisation)

Early livery included the temporary retention of the Southern number and remained black, although in certain cases "British Railways" was applied to the tender in place of "Southern", in Sunshine Yellow. Under British Railways the class was given the power classification 4F. Immediately after nationalisation the Q Class was given a temporary "S" prefix to the original Southern Railway number. As overhauls and re-paints became due, the class was eventually re-numbered within the British Railways standard numbering system and the livery was changed to British Railways goods plain black with the crest on the tender and numbering on the side of the cab. These locomotive numbers ranged from 30530 to 30549. [11] [ page needed ]

Locomotive summary

Related Research Articles

<span class="mw-page-title-main">SR Z class</span>

The SR Z class was an 0-8-0T 3-cylinder tank engine designed by Richard Maunsell and intended for heavy shunting on the Southern Railway, the first eight entering into service in 1929. It was a successful design and would have been built in greater numbers, but an order for a further ten was cancelled in 1930 due to the reduction in freight traffic as a result of the Great Depression.

<span class="mw-page-title-main">LSWR H15 class</span>

The LSWR/SR H15 class was a class of 2-cylinder 4-6-0 steam locomotives designed by Robert Urie for mixed-traffic duties on the LSWR. Further batches were constructed by Richard Maunsell for the SR. They were given the nickname of "Junior King Arthur" due to the size of their driving wheels, the S15 and their N15 cousins had driving wheels which had a diameter of 5 foot and 7 inches and 6 foot and 7 inches respectively.

<span class="mw-page-title-main">SR W class</span>

The SR Class W were 3-cylinder 2-6-4T tank engines designed in 1929 by Richard Maunsell for use on the Southern Railway. They were introduced in 1932 and constructed at Eastleigh and Ashford. The class was intended for short distance, inter-company/regional freight traffic transfer in London, and were standardised with parts from the N, N1, U and U1 classes.

The SR N15X class or Remembrance class were a design of British 4-6-0 steam locomotives converted in 1934 by Richard Maunsell of the Southern Railway from the large LB&SCR L class 4-6-4 tank locomotives that had become redundant on the London–Brighton line following electrification. It was hoped that further service could be obtained from these locomotives on the Southern's Western Section, sharing the duties of the N15 class locomotives. The locomotives were named after famous Victorian engineers except for Remembrance, which was the LBSCR's memorial locomotive for staff members who died in the First World War.

<span class="mw-page-title-main">LSWR N15 class</span> Class of 74 two-cylinder 4-6-0 locomotives

The LSWR N15 class was a British 2–cylinder 4-6-0 express passenger steam locomotive designed by Robert W. Urie. The class has a complex build history spanning three sub-classes and eight years of construction from 1918 to 1927. The first batch of the class was constructed for the London and South Western Railway (LSWR), where they hauled heavy express trains to the south coast ports and further west to Exeter. After the Lord Nelsons, they were the second biggest 4-6-0 passenger locomotives on the Southern Railway. They could reach speeds of up to 90 mph (145 km/h).

<span class="mw-page-title-main">SR Q1 class</span> Class of 0-6-0 freight engines designed by Oliver Bulleid

The SR Q1 class is a type of austerity steam locomotive constructed during the Second World War. The class was designed by Oliver Bulleid for use on the intensive freight turns experienced during wartime on the Southern Railway network. A total of 40 locomotives were built. Bulleid incorporated many innovations and weight-saving concepts to produce a highly functional design. The class lasted in service until July 1966, and the first member of the class, number C1, has been preserved by the National Railway Museum.

<span class="mw-page-title-main">SR Lord Nelson class</span> Class of 16 four-cylinder 4-6-0 locomotives

The SR class LN or Lord Nelson class is a type of 4-cylinder 4-6-0 steam locomotive designed for the Southern Railway by Richard Maunsell in 1926. They were intended for Continental boat trains between London (Victoria) and Dover harbour, but were also later used for express passenger work to the South-West of England. Sixteen of them were constructed, representing the most powerful Southern 4-6-0 design. They were all named after famous admirals.

<span class="mw-page-title-main">SR U class</span> Class of 50 two-cylinder 2-6-0 locomotives

The SR U class are 2-6-0 steam locomotives designed by Richard Maunsell for passenger duties on the Southern Railway (SR). The class represented the penultimate stage in the development of the Southern Railway's 2-6-0 "family", which improved upon the basic principles established by GWR Chief Mechanical Engineer (CME) George Jackson Churchward for Great Western Railway (GWR) locomotives. The U class design drew from experience with the GWR 4300s and N classes, improved by applying Midland Railway ideas to the design, enabling the SECR to influence development of the 2-6-0 in Britain.

<span class="mw-page-title-main">LSWR S15 class</span> British 2-cylinder 4-6-0 steam locomotive

The LSWR S15 class is a British 2-cylinder 4-6-0 freight steam locomotive designed by Robert W. Urie, based on his H15 class and N15 class locomotives. The class had a complex build history, spanning several years of construction from 1920 to 1936. The first examples were constructed for the London and South Western Railway (LSWR), where they hauled freight trains to the south coast ports and further west to Exeter, as well as occasional passenger work in conjunction with their larger-wheeled N15 class counterparts.

<span class="mw-page-title-main">SR U1 class</span>

The SR U1 class were three-cylinder 2-6-0 ('mogul') steam locomotives designed by Richard Maunsell for passenger duties on the Southern Railway. The fifth member of the Maunsell "family" of standardised moguls and 2-6-4 locomotives, the U1 was the final development of the Maunsell mogul, and marked a continuation of the basic principles established by CME George Jackson Churchward for the GWR. Developed from Maunsell's previous SR U class design, the U1 class shared characteristics with Churchward's GWR 4300 Class.

<span class="mw-page-title-main">British Rail Class D3/12</span>

British Rail class D3/12 was a class of three experimental diesel-electric shunting locomotives designed by Richard Maunsell of the Southern Railway in 1937. They quickly proved their effectiveness, and although they were not immediately replicated due to the advent of the Second World War, the class were the basis for a larger class of similar locomotives introduced by Oliver Bulleid in 1949.

<span class="mw-page-title-main">LSWR L11 class</span>

The London and South Western Railway L11 class was a class of 4-4-0 steam locomotives designed for mixed traffic work. They were introduced in 1903 and were nicknamed "Large Hoppers". As with most other Drummond productions, the locomotive had two inside cylinders and Stephenson link valve gear.

<span class="mw-page-title-main">LSWR L12 class</span>

The London and South Western Railway L12 class was a class of 20 4-4-0 steam locomotives designed for express passenger work by Dugald Drummond. They were introduced to the London and South Western Railway network in 1904. Despite the class being an unremarkable continuation of the Drummond lineage, one member was involved in the infamous Salisbury rail crash in June 1906. None of the class survived into preservation after their brief career in British Railways ownership.

<span class="mw-page-title-main">LSWR K10 class</span>

The London and South Western Railway K10 Class was a class of 40 4-4-0 steam locomotives designed for mixed traffic work. They were introduced on the London and South Western Railway in 1901 and 1902 to the design of Dugald Drummond, where they earned the nickname "Small Hoppers".

<span class="mw-page-title-main">SECR N class</span> Class of English steam locomotives

The SECR N class was a type of 2-6-0 ("mogul") steam locomotive designed in 1914 by Richard Maunsell for mixed-traffic duties on the South Eastern and Chatham Railway (SECR). Built between 1917 and 1934, it was the first non-Great Western Railway (GWR) type to use and improve upon the basic design principles established by GWR Chief Mechanical Engineer (CME) George Jackson Churchward. The N class was based on the GWR 4300 Class design, improved with Midland Railway concepts.

SECR N1 class Class of 6 three-cylinder 2-6-0 locomotives

The SECR N1 class was a type of 3-cylinder 2-6-0 ('mogul') steam locomotive designed by Richard Maunsell for mixed traffic duties, initially on the South Eastern and Chatham Railway (SECR), and later operated for the Southern Railway (SR). The N1 was a development of the basic principles established by the Great Western Railway's (GWR) Chief Mechanical Engineer (CME) George Jackson Churchward and by Maunsell's previous N class design.

LSWR S11 class

The LSWR Class S11 was a class of 10 4-4-0 steam locomotives designed for express passenger work by Dugald Drummond. They were introduced to services on the London and South Western Railway in 1903. None of the class survived into preservation after their brief career in British Railways ownership.

<span class="mw-page-title-main">LSWR T14 class</span>

The LSWR Class T14 was a class of ten 4-6-0 locomotives designed by Dugald Drummond for express passenger use on the London and South Western Railway and constructed at Eastleigh in 1911–12.

LSWR D15 class

The LSWR D15 class 4-4-0 was the last steam locomotive design by Dugald Drummond for the London and South Western Railway in 1912. By 1912, Dugald Drummond had built several classes of unsuccessful 4-6-0 express passenger locomotives. The result of these failures was that when he designed what was to be his last class in 1911, a new 4-4-0 design emerged from Eastleigh Works in February 1912, with what was to be the first of his D15 class.

<span class="mw-page-title-main">SECR K and SR K1 classes</span> Two classes of 20 two-cylinder (K) and 1 three-cylinder (K1) 2-6-4T locomotives

The SECR K class was a type of 2-6-4 tank locomotive designed in 1914 by Richard Maunsell for express passenger duties on the South Eastern and Chatham Railway (SECR), which operated between London and south-east England. The Southern Railway (SR) K1 class was a three-cylinder variant of the K class, designed in 1925 to suit a narrower loading gauge. They were among the first non-Great Western Railway (GWR) types to use and improve upon the basic design principles of power and standardisation established by GWR Chief Mechanical Engineer (CME) George Jackson Churchward. The locomotives were based on the GWR 4300 class, improved by the Midland Railway's ideals of simplicity and ease of maintenance.

References

Notes

  1. 1 2 Haresnape 1977, p. 112.
  2. 1 2 3 Scott-Morgan 2003, p. 9.
  3. ↑ Bradley 1975, pp. 54–59.
  4. ↑ Haresnape 1977, p. 115.
  5. ↑ Bradley 1975, pp. 54–58.
  6. ↑ Maunsell Q class 0-6-0, Southern E-Group, 17 March 2004. Retrieved 18 April 2007. For information on Bulleid's dislike of the design.
  7. 1 2 Bradley 1975, p. 55.
  8. ↑ Bradley 1975, p. 58.
  9. 1 2 Banks 2001, p. 54.
  10. ↑ Haresnape 1977, p. 114.
  11. ↑ Ian Allan ABC, 1962

Bibliography

  • Banks, Chris (2001), BR Locomotives 1955, Oxford: Oxford Publishing Company, ISBN   0-86093-560-4
  • Bradley, D.L. (October 1975), Locomotives of the Southern Railway. Part 1, London: Railway Correspondence and Travel Society, ISBN   0-901115-30-4
  • Haresnape, Brian (1977), Maunsell Locomotives - a pictorial history, Ian Allan Ltd, ISBN   0-7110-0743-8
  • Longworth, Hugh (2005), British Railway Steam Locomotives: 1948–1968, Oxford: Oxford Publishing Company, ISBN   0-86093-593-0
  • "New 0-6-0 goods engines for the Southern Railway", Railway Magazine, 82, 1938
  • Scott-Morgan, John (2003), The Story of the Q1s, Bishop's Waltham: KRB Publications, ISBN   0-9544859-1-2
  • Ian Allan ABC of British Railways Locomotives (1962 ed.).

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.