A rocket mass heater (RMH), also known as rocket stove mass heater, is a form of slow-release radiant heating system, designed to primarily heat people and secondarily to warm areas in line of sight around it. Variations of RMH can also be extended for the functions of cooking, heating water, and producing warm air for distribution. [1]
Rocket mass heaters are developed from rocket stoves, a type of wood-burning stove, and masonry heaters. A primary design of a rocket mass heater consists of an insulated combustion chamber where fuel is burned with high efficiency at high temperature, and a large thermal mass in contact with the exhaust gases, which absorbs most of the generated heat before the gases are released to the atmosphere. [2] According to anecdotes a rocket mass heater might reduce fuel consumption by 80–90% compared to "conventional" stoves. [3] [4]
In contrast to conventional wood-burning stoves and fireplaces, in a rocket mass heater, combustion is close to complete. In a rocket mass heater, by-products of combustion, such as smoke, soot, and creosote compounds, are sucked into the insulated tunnel of the unit, where some[ who? ] claim they further combust, releasing even more heat energy to drive the rocket process, unlike a normal fire, where they are blown out the chimney. [5]
The word rocket was adopted from the rocket stove developed by Aprovecho for cooking, described in 1982. [6] Mass refers to the mass of masonry where it stores heat. [1] Masonry heaters have been used since pre-historic times and have evolved into various designs in Europe, Russia, and China. The key principle is the incorporation of a large thermal mass built of masonry which absorbs heat from exhausting combustion products directed in a sinuous path through channels embedded in the masonry. [7]
The first prototype was built in the 1980s. Although in some sense simply a variation on a masonry heater, most rocket mass heaters are distinct in producing immediate radiant heat (from the metal "burn" barrel), in being constructed of much cheaper materials (usually a cob mass, 55 gallon steel drum, and small brick firebox), and in requiring less robust a base to be constructed on, since a rocket mass heater's weight is distributed over a larger area. [7]
There are several types of rocket mass heaters depending on how they are designed. In all designs, an internal insulated chimney called a "heat riser", produces an efficient high-temperature burn creating sufficient draft to push exhaust gases through the rest of the system. Flue gases are cooled to a relatively low temperature within the thermal store, approximately at 50 °C (122 °F). In some designs, steam within these gases condenses into liquid, releasing the associated latent heat of condensation which further increases the efficiency in the manner of a condensing (gas) boiler.
In the earliest and most popular form, wood is gravity-fed into a "J-shaped" combustion tube, from where the hot gases enter a well-insulated firebrick or ceramic refractory vertical secondary combustion chamber, the exhaust from which then passes along horizontal metal ducting embedded within a massive thermal store. The thermal store is large enough to retain heat for many hours and may form part of the structure of the building. They can be used with natural buildings and within permaculture designs; where they are normally self-built and are recognized by many (but not all) building codes which regulate the design and construction of heating systems within buildings. [5]
More recent alternate developments have instituted a batch-fed horizontal firebox called "batch box", which feeds into the vertical heat riser or secondary combustion chamber. Compared to a conventional J-tube style RMH, a batch-box style RMH can be loaded with more wood at once so that it can run by itself for a longer period of time. The horizontal duct flow through the mass may be replaced by a heavy "bell" of larger cross section where the hot gases slow and stratify, where the cooled gases exit near the bottom as in some masonry heaters. [8] To allow proper airflow, the vertical port at the back of the box should never be blocked. Compared to j-tube style RMH, it can take more time to build a batch-box style RMH. [9]
The heat riser of a cob style rocket mass heater is made of cob, which is a clay and sand mixture reinforced with straw. [10] Because of the relatively low thermal conductivity, a mass consisting of cob can absorb heat and retain it for a longer period. [11]
Invented by Paul Wheaton in 2010, a pebble-style rocket mass heater uses pebbles and rocks to facilitate its thermal mass. [12] Compared to cob style rocket mass heaters, pebble style heaters weigh less, allowing them to be moved and modified easily. The lightweight design also makes them more suitable for installing in places that have wood floor. A pebble core also provides a different aesthetic look compared to cob. [13]
Different types of rocket mass heaters are made with different components and different materials for specific purposes. All types of rocket mass heaters have three main components, named a wood feed, a heat riser and heat exchange mass. Depending on the design, a rocket mass heater can have different architecture within these components, and may also contain several other components designed for different purposes. [1]
The wood feed is the opening through which wood and air enter the system. In a J-tube design, the wood feed is a small and narrow opening that receives wood in a vertical orientation. [1] A wood feed is designed in a way that when wood sticks are inserted into the feed, only the bottom end of the sticks burn. Due to the direction of the airflow, the fire burns sideways, toward the combustion chamber and the heat riser. The horizontal direction of the fire prevents smoke from escaping the wood feed to the environment. As the bottom of the wood sticks burn, they get slowly pushed in to the feed. [14] The wood feed in a batch-box style rocket mass heater allows more wood to be loaded at the same time. [8]
The heat riser is an insulated, vertical channel that draws flames upward and powers the rest of the firebox. The heat riser should be insulated to help hold the flames at high temperatures for a complete combustion. [15] The low thermal conductivity of the insulation material allows temperature to build up within the heat riser to high temperatures. When the hot gases reach the enclosing barrel, it gives off a significantly higher amount of heat, which cools the hot air to a relatively lower temperature. This flow causes a strong convective current within the heat riser, which creates a forward airflow which helps wood to burn sideways in the wood feed. [14]
The barrel which encloses the heat riser is typically of 0.2 m3 (7 cu. ft.) which serves as a radiation heat source for the space, and whose top can also serve as a cooking surface. To allow efficient convective currents, the barrel should be made of steel or materials with higher thermal conductivity. [7]
The thermal mass which encloses the exhaust duct and absorbs heat from the hot combustion gases is the interface that radiates heat to the environment. It can be made of cob, rocks, sand, or pebbles. The thermal mass is often sculpted into a bench which can become an architectural feature of the home. [11]
A rocket mass heater is powered by the heat of combustion of wood inserted into the wood feed in vertical orientation. [1] To start the combustion process, the bottom end of the bundle of wood should be set on fire. The fire can only burn sideways toward the direction of the heat riser, since the insulated tube which connects the wood feed to the heat riser is the only available path for the flow of air. [14]
When fire reaches the heat riser, the J-tube design diverts flames upwards into the highly insulated combustion chamber, which allows heat energy to accumulate and create high temperature gases. The higher temperature also allows complete combustion of wood fuel. [7] When the hot air comes in contact with the enclosing barrel, the high thermal conductivity of the barrel draws a significant amount of heat from the gas. Because the barrel has a high rate of heat loss, it quickly warms the room. [7]
The remaining exhaust gases, which mainly consists of carbon dioxide and steam, exit sideways through a serpentine duct through the heat exchange mass, giving up much of their heat in the process. [3] The heat absorbed by the heat exchange mass stores that energy and slowly radiates it away to the surrounding environment. [11] [16]
An autonomous building is a building designed to be operated independently from infrastructural support services such as the electric power grid, gas grid, municipal water systems, sewage treatment systems, storm drains, communication services, and in some cases, public roads.
Liquid hydrogen (H2(l)) is the liquid state of the element hydrogen. Hydrogen is found naturally in the molecular H2 form.
A furnace, referred to as a heater or boiler in British English, is an appliance used to generate heat for all or part of a building. Furnaces are mostly used as a major component of a central heating system. Furnaces are permanently installed to provide heat to an interior space through intermediary fluid movement, which may be air, steam, or hot water. Heating appliances that use steam or hot water as the fluid are normally referred to as a residential steam boilers or residential hot water boilers. The most common fuel source for modern furnaces in North America and much of Europe is natural gas; other common fuel sources include LPG, fuel oil, wood and in rare cases coal. In some areas electrical resistance heating is used, especially where the cost of electricity is low or the primary purpose is for air conditioning. Modern high-efficiency furnaces can be up to 98% efficient and operate without a chimney, with a typical gas furnace being about 80% efficient. Waste gas and heat are mechanically ventilated through either metal flue pipes or polyvinyl chloride (PVC) pipes that can be vented through the side or roof of the structure. Fuel efficiency in a gas furnace is measured in AFUE.
A chimney is an architectural ventilation structure made of masonry, clay or metal that isolates hot toxic exhaust gases or smoke produced by a boiler, stove, furnace, incinerator, or fireplace from human living areas. Chimneys are typically vertical, or as near as possible to vertical, to ensure that the gases flow smoothly, drawing air into the combustion in what is known as the stack, or chimney effect. The space inside a chimney is called the flue. Chimneys are adjacent to large industrial refineries, fossil fuel combustion facilities or part of buildings, steam locomotives and ships.
A rocket engine is a reaction engine, producing thrust in accordance with Newton's third law by ejecting reaction mass rearward, usually a high-speed jet of high-temperature gas produced by the combustion of rocket propellants stored inside the rocket. However, non-combusting forms such as cold gas thrusters and nuclear thermal rockets also exist. Rocket vehicles carry their own oxidiser, unlike most combustion engines, so rocket engines can be used in a vacuum, and they can achieve great speed, beyond escape velocity. Vehicles commonly propelled by rocket engines include missiles, artillery shells, ballistic missiles and rockets of any size, from tiny fireworks to man-sized weapons to huge spaceships.
A stove or range is a device that generates heat inside or on top of the device, for -local heating or cooking. Stoves can be powered with many fuels, such as natural gas, electricity, gasoline, wood, and coal.
A combined cycle power plant is an assembly of heat engines that work in tandem from the same source of heat, converting it into mechanical energy. On land, when used to make electricity the most common type is called a combined cycle gas turbine (CCGT) plant, which is a kind of gas-fired power plant. The same principle is also used for marine propulsion, where it is called a combined gas and steam (COGAS) plant. Combining two or more thermodynamic cycles improves overall efficiency, which reduces fuel costs.
A flue is a duct, pipe, or opening in a chimney for conveying exhaust gases from a fireplace, furnace, water heater, boiler, or generator to the outdoors. Historically the term flue meant the chimney itself. In the United States, they are also known as vents for boilers and as breeching for water heaters and modern furnaces. They usually operate by buoyancy, also known as the stack effect, or the combustion products may be "induced" via a blower. As combustion products contain carbon monoxide and other dangerous compounds, proper "draft", and admission of replacement air is imperative. Building codes, and other standards, regulate their materials, design, and installation.
A pellet stove is a stove that burns compressed wood or biomass pellets to create a source of heat for residential and sometimes industrial spaces. By steadily feeding fuel from a storage container (hopper) into a burn pot area, it produces a constant flame that requires little to no physical adjustments. Today's central heating systems operated with wood pellets as a renewable energy source can reach an efficiency factor of more than 90%.
A masonry oven, colloquially known as a brick oven or stone oven, is an oven consisting of a baking chamber made of fireproof brick, concrete, stone, clay, or cob. Though traditionally wood-fired, coal-fired ovens were common in the 19th century, and modern masonry ovens are often fired with natural gas or even electricity. Modern masonry ovens are closely associated with artisan bread and pizza, but in the past they were used for any cooking task involving baking. Masonry ovens are built by masons.
In thermodynamics, the thermal efficiency is a dimensionless performance measure of a device that uses thermal energy, such as an internal combustion engine, steam turbine, steam engine, boiler, furnace, refrigerator, ACs etc.
A masonry heater is a device for warming an interior space through radiant heating, by capturing the heat from periodic burning of fuel, and then radiating the heat at a fairly constant temperature for a long period. Masonry heaters covered in tile are called Kachelofen. The technology has existed in different forms, from back into the Neoglacial and Neolithic periods. Archaeological digs have revealed excavations of ancient inhabitants utilizing hot smoke from fires in their subterranean dwellings, to radiate into the living spaces. These early forms eventually evolved into modern systems.
Renewable heat is an application of renewable energy referring to the generation of heat from renewable sources; for example, feeding radiators with water warmed by focused solar radiation rather than by a fossil fuel boiler. Renewable heat technologies include renewable biofuels, solar heating, geothermal heating, heat pumps and heat exchangers. Insulation is almost always an important factor in how renewable heating is implemented.
A wood-burning stove is a heating or cooking appliance capable of burning wood fuel, often called solid fuel, and wood-derived biomass fuel, such as sawdust bricks. Generally the appliance consists of a solid metal closed firebox, often lined by fire brick, and one or more air controls. The first wood-burning stove was patented in Strasbourg in 1557. This was two centuries before the Industrial Revolution, so iron was still prohibitively expensive. The first wood-burning stoves were high-end consumer items and only gradually became used widely.
The outdoor wood boiler is a variant of the classic wood stove adapted for set-up outdoors while still transferring the heat to interior buildings.
Rocket propellant is used as reaction mass ejected from a rocket engine to produce thrust. The energy required can either come from the propellants themselves, as with a chemical rocket, or from an external source, as with ion engines.
A storage water heater, or a hot water system (HWS), is a domestic water heating appliance that uses a hot water storage tank to maximize water heating capacity and provide instantaneous delivery of hot water. Conventional storage water heaters use a variety of fuels, including natural gas, propane, fuel oil, and electricity. Less conventional water heating technologies, such as heat pump water heaters and solar water heaters, can also be categorized as storage water heaters.
Paul Wheaton is an American permaculture author, master gardener, software engineer, and disciple of the natural agriculturist Sepp Holzer. He is known for writing his book, "Building a Better World in Your Backyard", founding Permies, the largest website devoted to permaculture, as well as for creating and publishing articles, videos, and podcasts on the subject of permaculture.
Ernie and Erica Wisner are a couple from Tonasket, Washington, United States, best known for their innovative rocket mass heater designs. They are often referred to as the worldwide leaders and trainers in rocket stove technology. They have made over 700 rocket stoves all over the world.