 |
| Atchison, Topeka & Santa Fe Railway 5017 | |||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 ATSF 5017 at the National Railroad Museum, Green Bay in August 1970 | |||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||
Santa Fe 5017 is a 2-10-4 or "Texas" type steam locomotive built by the Baldwin Locomotive Works in 1944 for the Atchison, Topeka and Santa Fe Railway.
No. 5017 was built by Baldwin Locomotive Works in 1944 during World War II. The 5017, along with the 5011 Class 2-10-4's, were nicknamed "War Babies" by the AT&SF. It entered service on July 20 of that year and was assigned to freight service on the Pecos division, the Mountain Division of New Mexico. The 5017 operated between Belen, New Mexico, Waynoka, Oklahoma, and La Junta, Colorado. Between 1953 and 1955, No. 5017 was used in extra service on the Pecos division in eastern New Mexico to supplement diesel power during the peak movement of perishables, grains and other commodities. On July 25, 1955, No. 5017 made her last trip, tallying 755,088 miles. Then, the locomotive was retired by the AT&SF's newer, lower-maintenance Diesels.
No. 5017 was brought to the National Railroad Museum through the efforts of former director W.L. Thorton, who was the Director of Traffic for the Kimberly-Clark railway. It was formally donated on December 27, 1959, by E. Marsh, President of the Santa Fe Railway. Today, 5017 is one of 5 Surviving 2-10-4 Texas Type locomotives that were built for AT&SF.
Under the Whyte notation for the classification of steam locomotives, a 2-10-4 locomotive has two leading wheels on one axle, usually in a Bissel truck, ten coupled driving wheels on five axles, and four trailing wheels on two axles, usually in a bogie. These were referred to as the Texas type in most of the United States, the Colorado type on the Burlington Route, and the Selkirk type in Canada.
Under the Whyte notation for the classification of steam locomotives, 4-8-4 represents the wheel arrangement of four leading wheels on two axles, eight powered and coupled driving wheels on four axles and four trailing wheels on two axles. The type was first used by the Northern Pacific Railway, and initially named the Northern Pacific, but railfans and railroad employees have shortened the name since its introduction. It is most-commonly known as a Northern.
The Atchison, Topeka and Santa Fe Railway, often referred to as the Santa Fe or AT&SF, was one of the largest Class 1 railroads in the United States between 1859 and 1996.
Under the Whyte notation for the classification of steam locomotives, 2-10-2 represents the wheel arrangement of two leading wheels, ten powered and coupled driving wheels, and two trailing wheels. In the United States and elsewhere the 2-10-2 is known as the Santa Fe type, after the Atchison, Topeka and Santa Fe Railway that first used the type in 1903.
The California State Railroad Museum is a museum in the California State Parks system that interprets the role of railroads in the Western U.S.. It is located in Old Sacramento State Historic Park at 111 I Street, Sacramento, California.
In 1948, 14 railroads in North America owned more than 1,000 steam locomotives each. See also: Historical sizes of railroads
Atchison, Topeka and Santa Fe 2926 is a class "2900" 4-8-4 type steam locomotive built in May 1944 by the Baldwin Locomotive Works for the Atchison, Topeka & Santa Fe Railway (ATSF). It was used to pull passenger and fast freight trains, mostly throughout New Mexico, until it was retired from revenue service in 1953. Three years later, it was donated to Coronado Park in Albuquerque for static display.
The "Beep" is an individual switcher locomotive built in 1970 by the Atchison, Topeka and Santa Fe Railway at its Cleburne, Texas, workshops. Technically a rebuild, the Beep originally entered service on the Santa Fe as a Baldwin Model VO-1000. Following its successful CF7 capital rebuilding program, the company hoped to determine if remanufacturing its aging, non-EMD end cab switchers by fitting them with new EMD prime movers was an economically viable proposition. The conversion procedure proved too costly and only the one unit was modified. In 2008-2009, this locomotive was retired and stored operational at Topeka, Kansas. In May 2009 the unit was donated to the Western America Railroad Museum in Barstow, California.
The Baldwin VO-1000 is a diesel-electric switcher locomotive built by the Baldwin Locomotive Works between January 1939 and December 1946. These units were powered by a naturally aspirated eight-cylinder diesel engine rated at 1,000 horsepower (746 kW), and rode on a pair of two-axle trucks in a B-B wheel arrangement. These were either the AAR Type-A switcher trucks, or the Batz truck originally developed by the Atchison, Topeka and Santa Fe Railway as a leading truck for steam locomotives. 548 examples of this model were built for American railroads, including examples for the Army and Navy.
The Atchison, Topeka and Santa Fe Railway's 3460 class comprised six 4-6-4 "Super Hudson" type steam locomotives built in 1937 by the Baldwin Locomotive Works for service between La Junta, Colorado and Chicago, Illinois, a fairly flat division of the railroad suited for the 4-6-4 type. They were substantially larger than the road's earlier 3450 class locomotives, and all were built oil-fired, although in a manner that would allow for easy conversion to coal firing. All were fitted with SKF roller bearings on every axle.
The Santa Fe class 3450 consisted of ten 4-6-4 "Hudson" type steam locomotives built by the Baldwin Locomotive Works in 1927. Built as coal-burners, they were later converted to oil-burning during the 1930s. At the same time, the locomotives were given 79-inch (2,007 mm) driving wheels instead of their original 73-inch (1,854 mm), and the boiler pressures increased from 220 to 230 lbf/in2. Combined, these changes reduced the starting tractive effort from 44,250 to 43,300 lbf, but increased the top speed and efficiency. Their early service was in the Midwest, between Chicago and Colorado; later, some were assigned to service in the San Joaquin Valley of California between Bakersfield and Oakland.
Atchison, Topeka and Santa Fe Railway No. 1010 is a 2-6-2 type steam locomotive built by the Baldwin Locomotive Works in 1901 for Atchison, Topeka and Santa Fe Railway. It started out as a Vauclain compound locomotive before it was rebuilt into a conventional locomotive in the 1910s. It was primarily used for various passenger trains across the Southwestern United States, including the record breaking 1905 Scott Special on the segment between Needles, California, and Seligman, Arizona, before it was reassigned to freight service in the 1940s. It was retired in 1955 and was kept by the Santa Fe for several years for preservation purposes. In 1979, Santa Fe donated No. 1010 to the California State Railroad Museum, where the locomotive resides there in Sacramento as of 2024.
Santa Fe No. 5000 is a 2-10-4 "Texas" type steam locomotive constructed by Baldwin Locomotive Works in 1930 for the Atchison, Topeka and Santa Fe Railway. No. 5000 was immediately nicknamed the "Madame Queen" and remained a unique member of its own class. It was donated to the City of Amarillo, Texas in 1957. As of 2023, Santa Fe 5000 is maintained by the Railroad Artifact Preservation Society. Santa Fe 5000 is on the National Register of Historic Places.
Atchison, Topeka and Santa Fe 3759 is a class 3751 4-8-4 "Heavy Mountain" type steam railway locomotive built by the Baldwin Locomotive Works in 1928. It is on display in Locomotive Park, located between Andy Devine Avenue and Beale Street in Kingman, Arizona. The park was established in August 1957 with AT&SF 3759 donated to the City of Kingman in recognition of Kingman's history with the railroad. The locomotive is termed a Mountain type on the nearby information plaque, and also in the city's descriptive material which is correct for the Santa Fe. ATSF 4-8-4s were referenced in documentation as type "Heavy Mountain", "New Mountain" or "Mountain 4-wheel trailer."
Atchison, Topeka and Santa Fe 3415 is a preserved class "3400" 4-6-2 "Pacific" type steam locomotive built in June 1919 by the Baldwin Locomotive Works for the Atchison, Topeka and Santa Fe Railway. Retired in 1954, it sat in Eisenhower Park in Abilene, Kansas, until 1996. At that point, it was put on display in the Abilene and Smoky Valley yard. Restoration began in 2005 and was completed in early 2009. The engine was taken out of service in October 2023, undergoing its federally mandated 15-year overhaul. Restoration began in April 2024, and is expected to take a minimum of 18 months. The engine is the only operating steam locomotive in Kansas and is one of four Santa Fe steam engines still operating can the U.S. In April 2024, the iconic locomotive was designated as the Kansas steam locomotive by an act of the Kansas Legislature, effectively making it a state symbol.
The Southern Transcon is a main line of the BNSF Railway comprising 11 subdivisions between Southern California and Chicago, Illinois. Completed in its current alignment in 1908 by the Atchison, Topeka and Santa Fe Railway, when it opened the Belen Cutoff in New Mexico and bypassed the steep grades of Raton Pass, it now serves as a mostly double-tracked intermodal corridor.
The Atchison, Topeka and Santa Fe Railway class 5011 was the last class of steam locomotives to be purchased by AT&SF. The class was introduced by Baldwin Locomotive Works in 1944.
The Santa Fe 2900 Class was a series of 30 4-8-4 type steam locomotives built between 1943 and 1944 for Atchison, Topeka and Santa Fe Railroad and pulled freight and passenger trains until retirement in the early to late-1950s.
Atchison, Topeka and Santa Fe No. 769 is a preserved 769 class 2-8-0 "consolidation" type steam locomotive originally built by the Richmond Locomotive Works in 1900 as one of the Santa Fe Pacific Railroad's final locomotives. It was originally numbered 266 before the SFP had completely merged into its parent company, the Atchison, Topeka and Santa Fe Railway, and the locomotive was renumbered 3045, and it was eventually renumbered again to 769. The locomotive was put into use for short-distance freight trains and for yard switching before being sold again in 1950 to the Albuquerque and Cerrillos Coal Company in Madrid, New Mexico for more yard switching and short distance coal trains. As the 1950s progressed, however, the company shut down due to bankruptcy, and No. 769 was abandoned along with the rest of the locomotive yard and the rest of Madrid. In the late 1970s the town was recovered and converted into a heritage town, and No. 769 was then put on static display just behind the shed it was stored in, which was converted to the Engine House Theatre. In early 2020, No. 769 was selected for a future project to restore it to operating condition to eventually run on reconstructed trackage between Madrid and a nearby BNSF interchange near Los Cerrillos.
Atchison, Topeka and Santa Fe No. 1316 is a preserved 1309 class 4-6-2 "Pacific" type steam locomotive built by the Baldwin Locomotive Works in 1911 for the Atchison, Topeka and Santa Fe Railway. It was frequently used for pulling fast passenger trains in Texas, until it was reassigned to freight service in the late 1940s. After being retired in 1954, it was donated to the Fort Concho Museum in San Angelo, Texas for static display. In 1980, No. 1316 was acquired by the Texas State Railroad, who moved it to Rusk, Texas and restored it in 1982 as their No. 500. It continued to operate there until 2002, when it was found to be due for an overhaul, and it spent several years in storage, disassembled. As of 2024, No. 1316 has been put back together during a cosmetic restoration and it is awaiting the necessary overhaul required to operate it again.