This article needs additional citations for verification . (November 2018) (Learn how and when to remove this template message)
1962 Studebaker Champ Pickup
|Assembly|| Studebaker Automotive Plant, South Bend, Indiana, United States |
Studebaker Canada, Hamilton, Ontario, Canada
Studebaker Australia, Melbourne, Victoria, Australia
|Body and chassis|
|Body style||2-door pickup truck|
|Related|| Studebaker Lark |
|Engine||194 cu in (3.18 L) I6 |
3.8 L Chevrolet 230 I6
283 cu in (4.64 L) V8
The Studebaker Champ was a light-duty pickup truck produced by the Studebaker Corporation from 1960-1964.
Designed at a time when Studebaker's truck line had not seen major upgrading in over 10 years, the company, which had endured years of declining sales, was forced to use a number of existing components.
The chassis and cargo box of the Champ were basically the same as what had been used for Studebaker's ½ and ¾-ton E-series trucks since 1949, but the cab section was very different in an attempt to compete with the Ford Ranchero and Chevrolet El Camino.
An entirely new cab was out of the question because of cost considerations, but the new Lark compact car's body proved to be just the right size and shape to suit the purpose. The engineering staff took a four-door sedan, cut it in half behind the front doors and modified the front half slightly to fit the truck chassis. The only new sheetmetal stamping that was required was the back wall of the new cab. Minor modifications for mounting of the cab to the 1949-vintage truck frame were also made.
The Lark's front end sheetmetal was retained as well, but funds were allocated to give the Champ a new horizontal-bar grille that delivered a "tougher" look.
Studebaker equipped the Champ with engines that had served well in the company's lineup for years. Buyers in 1960 could choose the last of the company's flathead sixes, either the Lark's 170 in³ (90 hp (67 kW)) or the time-honored 245 in³ "Big Six" (110 hp (82 kW)) which dated to the early 1930s.
The 170 engine was upgraded to overhead valves (OHV) for 1961, gaining 22 hp (16 kW) in the process (up to 112 hp (84 kW)), enough of an improvement that Studebaker saw fit to finally discontinue the Big Six.
The new OHV six was a novel design, retaining as many existing components as possible while modernizing an engine that had been introduced in 1939. Unfortunately, the little engine's quality came into question early on, with a number of engines developing cracks in the cylinder head. The problem, which occurred most often in engines that had improperly-adjusted valves, was never completely solved, but with proper care, the 170 remains a serviceable engine for many owners more than 40 years after it went out of production.
From the start of production, those desiring V8 power could choose between Studebaker's 259- and 289 in³ engines with either a two- or four-barrel carburetor. Both engines remained largely unchanged during the truck's production run.
A wide variety of transmissions, both manual and automatic, were available in Champs. Base models came with a three-speed column shifted manual (AKA: 3 on the tree), with four- and five-speeds optional, as well as overdrive (with the three-speed). Studebaker's Flight-O-Matic (built by Borg-Warner) was the automatic option. This same transmission was used by other manufacturers, including Ford.
Given the cobbled-up nature of the truck, sales were fairly good for the 1960 model year "5E" series. Unfortunately, it was all downhill from there.
1961's 6E series saw the addition of a full-width cargo box, the Spaceside, for which Studebaker had purchased the tooling from Dodge. It didn't help sales, however, nor did the problems which developed early on with the redesigned six-cylinder engine.
Few changes were made to the Champ in 1962 (7E series) or 1963 (8E series), and the few 1964 models built actually continued the 8E series started for the '63 models. The only new feature introduced for the 8E trucks was air conditioning.
By December 1963, Studebaker's board of directors announced the closure of its South Bend, Indiana factory, and the trucks were among the casualties of the company's consolidation around an abbreviated family-car lineup in its Hamilton, Ontario, Canada assembly plant.
When they purchased the rights and tooling to the Studebaker Avanti in 1964, Nate Altman and Leo Newman also acquired the rights and tooling to Studebaker's trucks. However, Altman and Newman, for reasons which are lost to history, never built as much as a single truck, and the AM General truck and Hummer plant took over Studebaker's former Chippewa Avenue truck plant in South Bend for military production in late 1964. This plant is now used to store every stock Studebaker part that was left after the company's closing. a section of this plant is used as a store that sells parts to collectors and people taking on restorations.
The Champ is seldom given credit for introducing a feature that is nearly universal among today's pickup trucks: the sliding rear window, which was available from the start, proved to be quite popular among Champ buyers.It was truly one of Studebaker's better ideas, and caught on later among the major truck makers.
With a cab based on a sedan body, the Champ was among the first pickups to offer true "car-like" comfort, with a wide, comfortable bench seat and a handsomely-styled interior. Other manufacturers took until the late 1960s and early 1970s to follow the Champ's lead.
Finally, the last Champs of 1963-64 were among the first American trucks — if not the first — to offer service bodies constructed of fiberglass. Today, such bodies made of fiberglass and composites are still gaining acceptance, with the steel service body remaining the norm.
While it didn't prove to be the savior of the Studebaker truck line, the Champ also pointed the way to a smaller yet still rugged pickup, something Dodge later claimed as a "first" with their mid-sized Dakota, which was introduced as a 1987 model, nearly 27 years after the Champ.
Today, the Champs that still exist are highly prized for their interesting combination of passenger-car comfort and style and their rugged mechanical durability (the sixes' head problems notwithstanding). About the only major failing of the Champ is shared with many Studebaker models: rust. Champs tend to rust most severely in the cab floor and front fenders. If left unchecked, it can be extensive and very costly to repair, if it is repairable at all.
The Studebaker-Packard Hawk series were cars produced by the merged Studebaker-Packard corporation between 1956 and 1964. All but the 1958 Packard Hawk were badged Studebaker. Described by the company as "family sports cars", they were all two-door, four-seat coupes and hardtops. They were an evolution of the long wheelbase (120") 1953 C/K models designed by Robert Bourke, lead designer with the Raymond Loewy Agency. The 1962 redesign as the GT Hawk was by another famed stylist, Brooks Stevens.
The Chevrolet El Camino is a pickup / coupé utility vehicle that was produced by Chevrolet between 1959–60 and 1964–1987. Unlike a standard pickup truck, the El Camino was adapted from the standard two-door Chevrolet station wagon platform and integrated the cab and cargo bed into the body.
The Chevrolet S-10 is a compact pickup truck that was produced by Chevrolet. It was the first domestically built compact pickup of the big three American automakers. When it was first introduced as a "quarter-ton pickup" in 1981 for the 1982 model year, the GMC version was known as the S-15 and later renamed the GMC Sonoma. A high-performance version was released in 1991 and given the name of GMC Syclone. The pickup was also sold by Isuzu as the Hombre from 1996 through 2000, but only in North America. There was also an SUV version, the Chevrolet S-10 Blazer/GMC S-15 Jimmy. An electric version was leased as a fleet vehicle in 1997 and 1998. Together, these pickups are often referred to as the S-series.
C/K is a series of trucks that were manufactured by General Motors. Marketed under the Chevrolet and GMC brands, the C/K series included a wide range of vehicles. While most commonly associated with pickup trucks, the model line also included chassis-cab trucks and medium-duty trucks and served as the basis for GM full-size SUVs. Used for both the model branding and the internal model code, "C" denoted two-wheel drive; "K" denoted four-wheel drive. For third-generation examples produced between 1987 and 1991, these were replaced by "R" and "V", respectively.
The Ford E-Series is a range of full-size vans produced by the American automaker Ford. Introduced for the 1961 model year as the replacement for the Ford F-series panel van, the model line is currently in its fourth generation.
The Dodge Dakota, known as the Ram Dakota for the final two years of production, is a mid-size pickup truck from Chrysler's Ram division. The first Dakota was introduced in late 1986 as a 1987 model. From its introduction through 2009, it was marketed under the Dodge brand.
The Studebaker Lark is a compact car that was produced by Studebaker from 1959 to 1966.
The Scotsman was an automobile series produced by the Studebaker Packard Corporation of South Bend, Indiana, during model years 1957 and 1958, and a low-priced series of pickup trucks in 1958 and 1959. The name was based on the reputation of Scottish frugality, the cars being built for function and minimalism.
The Chevrolet S-10 Blazer and its badge engineered GMC S-15 Jimmy counterpart are compact/mid-size SUVs manufactured and marketed by Chevrolet and GMC from the 1983 through 2005 model years across two generations.
The D/W series was a line of pickup trucks that was sold by Dodge from October 1960 to September 30, 1993. The same basic design was retained until the October 1993 introduction of a completely redesigned Ram. The D/W series shared its AD platform with the Dodge Ramcharger/Plymouth Trail Duster twins. 4x2 models were designated D, while 4x4 models were designated W.
The Mazda B series is a series of pickup trucks that was manufactured by Mazda. Produced across five generations from 1961 to 2006, the model line began life primarily as a commercial vehicle, slotted above a kei truck in size. Through its production, Mazda used engine displacement to determine model designations; a B1500 was fitted with a 1.5 L engine and a B2600, a 2.6 L engine.
The Ford Super Duty is a series of trucks manufactured by the Ford Motor Company. Introduced in 1998 for the 1999 model year, the F-Series Super Duty trucks marked the addition of a heavy-duty pickup to the Ford F-Series range with the new versions of the F-250, F-350, and F-450 trucks, while the previous 1987–1997 F-Super Duty chassis cabs were replaced by the F-450 chassis cab and F-550 Super Duty.
The Datsun Truck is a compact pickup truck made by Nissan in Japan from 1955 through 1997. It was originally sold under the Datsun brand, but this was switched to Nissan in 1983. It was replaced in 1997 by the Frontier and Navara. In Japan, it was sold only in Nissan Bluebird Store locations.
Transtar was the model name given to the line of pickup trucks produced by the Studebaker Corporation of South Bend, Indiana, from 1956-1958 and 1960-1963. The name was used on most trucks in the Studebaker E-series, but not all. The Transtar name was first introduced for the 1956 model year in 1/2-ton, 3/4-ton, 1-ton, 2-ton, and 2-ton heavy duty capacities. The three smaller models were available with factory-built pick-up bodies. The basic styling of these trucks dated back to the 1949 models, though they had received some styling and engineering changes in 1954 and 55. The Transtar name continued to be used on most of the 1957-58 3E series trucks, though a stripped-down Studebaker Scotsman model without the Transtar name was introduced in the 1958 model year. The 57-58 Transtars received an aggressive new fiberglass grille that attempted to make Studebaker's outdated cab design look fresh and new. For unknown reasons, the Transtar name was dropped for the 1959 4E series Studebaker trucks and changed to Deluxe.
The Studebaker Coupe Express was a passenger car based pickup truck, produced by the Studebaker Corporation of South Bend, Indiana, between 1937 and 1939. Unlike other concurrent pick-up trucks, the coupe express mated Studebaker's passenger car styling to a full size truck bed.
The E series Studebaker trucks are the original 1955 E series Studebaker trucks, sold in half-ton, 3/4-ton, and 1-, 1.5-, and 2-ton capacities, and the1956: 2E series; 1957-58: 3E series; 1959: 4E series; 1960: 5E series; 1961: 6E series; 1962: 7E series; and 1963-64: 8E series. Given these model-year designations, "E series" has come to mean all Studebaker trucks built between 1955 and the end of all vehicle production in the US in December 1963. Within each tonnage rating, these trucks were all fairly similar, since Studebaker was in dire financial straits during this entire period and invested virtually nothing to update its truck division products. For the 1956 and 1957-58 models, all Studebaker trucks were called Transtar.
The International R series is a model range of trucks that was manufactured by International Harvester. Introduced in 1953 as the replacement for the International L series, the model line marked the introduction of the IH "tractor" grille emblem on International road vehicles. Sharing a cab with its predecessor, the R-series marked the introduction of four-wheel drive vehicles and the wider use of diesel engines.
The Ford P100 is a car-based pickup truck that was built by Ford from 1971 to 1993, initially in South Africa, and later Portugal. It was based on medium-sized Ford passenger cars, originally the Ford Cortina and from 1988 the Ford Sierra. Initially marketed as the Ford Cortina Pickup, the P100 name was adopted in 1982. The P-100 name had previously been used on a small North American panel van in the 1960s.
The Chevrolet Van is a range of vans that was manufactured by General Motors from the 1964 to 1995 model years. Introduced as the successor for the rear-engine Corvair Corvan/Greenbrier, the model line also replaced the panel van configuration of the Chevrolet Suburban. The model line was sold in passenger van and cargo van configurations as well as a cutaway van chassis that served as the basis for a variety of custom applications.
In 1939 Dodge presented a completely new designed line of pickups and trucks. Formally the T series for 1939, V series for 1940, and the W series from 1941 through 1947, the trucks became mostly known as the Dodge Job-Rated trucks.
|Six||Light Six||Standard Six||Dictator||Champion||Champion||Lark|
|Big Six||Land Cruiser||Land Cruiser||Scotsman|