Texture (geology)

Last updated

In geology, texture or rock microstructure [1] refers to the relationship between the materials of which a rock is composed. [2] The broadest textural classes are crystalline (in which the components are intergrown and interlocking crystals), fragmental (in which there is an accumulation of fragments by some physical process), aphanitic (in which crystals are not visible to the unaided eye), and glassy (in which the particles are too small to be seen and amorphously arranged). [2] The geometric aspects and relations amongst the component particles or crystals are referred to as the crystallographic texture or preferred orientation. Textures can be quantified in many ways. [3] A common parameter is the crystal size distribution. This creates the physical appearance or character of a rock, such as grain size, shape, arrangement, and other properties, at both the visible and microscopic scale.

Contents

Textures are penetrative fabrics of rocks; they occur throughout the entirety of the rock mass on microscopic, hand-sized specimen, and often outcrop scales. This is similar in many ways to foliations, except a texture does not necessarily carry structural information in terms of deformation events and orientation information. Structures occur on a hand-sized specimen scale and above.

Microstructure analysis [4] describes the textural features of the rock, and can provide information on the conditions of formation, petrogenesis, and subsequent deformation, folding, or alteration events. [5]

Crystalline textures include phaneritic, foliated, and porphyritic. [2] Phaneritic textures are where interlocking crystals of igneous rock are visible to the unaided eye. Foliated texture is where metamorphic rock is made of layers of materials. [2] Porphyritic texture is one in which larger pieces (phenocrysts) are embedded in a background mass made of much finer grains. [2]

Fragmental textures include clastic, bioclastic, and pyroclastic. [2]

A preferred mineral orientation, is the texture of metamorphic rock in which its grains have a flattened shape (inequant), and their planes tend to be oriented in the same direction. [6]

Texture in a thin section of mylonitic quartzite from the Alps, Italy Mica-fish.jpg
Texture in a thin section of mylonitic quartzite from the Alps, Italy
Texture in a thin section of tholeiitic basalt Basalto tholeitico nicol paralleli.jpg
Texture in a thin section of tholeiitic basalt

Nomenclature

Rock microstructure includes the texture and small-scale structures of a rock. The words texture and microstructure are interchangeable, with the latter preferred in modern geological literature. However, texture is still acceptable because it is a useful means of identifying the origin of rocks, how they formed, and their appearance.

Sedimentary microstructures

Description of sedimentary rock microstructure aims to provide information on the conditions of deposition of the sediment, the paleoenvironment, and the provenance of the sedimentary material.

Methods involve description of clast size, sorting, composition, rounding or angularity, sphericity and description of the matrix. Sedimentary microstructures, specifically, may include microscopic analogs of larger sedimentary structural features such as cross-bedding, syn-sedimentary faults, sediment slumping, cross-stratification, etc.

Maturity

The maturity of a sediment is related not only to the sorting (mean grain size and deviations), but also to the fragment sphericity, rounding and composition. Quartz-only sands are more mature than arkose or greywacke.

Fragment shape

Fragment shape gives information on the length of sediment transport. The more rounded the clasts, the more water or wind-worn they are. Particle shape includes form and rounding. Form indicates whether a grain is more equant (round, spherical) or platy (flat, disc-like, oblate); as well as sphericity.

Roundness

Roundness refers to the degree of sharpness of the corners and edges of a grain. The surface texture of grains may be polished, frosted, or marked by small pits and scratches. This information can usually be seen best under a binocular microscope, not in a thin section.

Composition

Composition of the clasts can give clues as to the derivation of a rock's sediments. For instance, volcanic fragments, fragments of cherts, well-rounded sands all imply different sources.

Matrix and cement

The matrix of a sedimentary rock and the mineral cement (if any) holding it together are all diagnostic.

Diagenetic features

Usually diagenesis results in a weak bedding-plane foliation. Other effects can include flattening of grains, pressure dissolution and sub-grain deformation. Mineralogical changes may include zeolite or other authigenic minerals forming in low-grade metamorphic conditions.

Sorting

Sorting is used to describe the uniformity of grain sizes within a sedimentary rock. Understanding sorting is critical to making inferences on the degree of maturity and length of transport of a sediment. Sediments become sorted on the basis of density, because of the energy of the transporting medium. High energy currents can carry larger fragments. As the energy decreases, heavier particles are deposited and lighter fragments continue to be transported. [7] This results in sorting due to density. Sorting can be expressed mathematically by the standard deviation of the grain-size frequency curve of a sediment sample, expressed as values of φ (phi). Values range from <0.35φ (very well sorted) to >4.00φ (extremely poorly sorted).

Metamorphic microstructure

The study of metamorphic rock microstructures aims to determine the timing, sequence and conditions of deformations, mineral growth and overprinting of subsequent deformation events.

Metamorphic microstructures include textures formed by the development of foliation and overprinting of foliations causing crenulations. The relationship of porphyroblasts to the foliations and to other porphyroblasts can provide information on the order of formation of metamorphic assemblages or facies of minerals.

Shear textures are particularly suited to analysis by microstructural investigations, especially in mylonites and other highly disturbed and deformed rocks.

Foliations and crenulations

On the thin section and hand-sized specimen scale a metamorphic rock may manifest a planar penetrative fabric called a foliation or a cleavage. Several foliations may be present in a rock, giving rise to a crenulation.

Identifying a foliation and its orientation is the first step in analysis of foliated metamorphic rocks. Gaining information on when the foliation formed is essential to reconstructing a P-T-t (pressure, temperature, time) path for a rock, as the relationship of a foliation to porphyroblasts is diagnostic of when the foliation formed, and the P-T conditions which existed at that time.

Flinn Diagram showing degree of stretching, or lineation (L) versus flattening, or foliation (S) Tectonites.png
Flinn Diagram showing degree of stretching, or lineation (L) versus flattening, or foliation (S)

Lineations

Linear structures in a rock may arise from the intersection of two foliations or planar structures, such as a sedimentary bedding plane and a tectonically induced cleavage plane. The degree of lineation compared with the degree of foliation for certain strain markers in deformed rocks are commonly plotted on a Flinn diagram.

Ductile shear microstructures

Very distinctive textures form as a consequence of ductile shear. The microstructures of ductile shear zones are S-planes, C-planes and C' planes. S-planes or schistosity planes are parallel with the shear direction and are generally defined by micas or platy minerals. Define the flattened long-axis of the strain ellipse. C-planes or cissalement planes form oblique to the shear plane. The angle between the C and S planes is always acute, and defines the shear sense. Generally, the lower the C-S angle the greater the strain. The C' planes are rarely observed except in ultradeformed mylonites, and form nearly perpendicular to the S-plane.

Other microstructures which can give sense of shear include

Igneous microstructure

Analysis of igneous rock microstructure may complement descriptions on the hand-sized specimen and outcrop scale. This is especially vital for describing phenocrysts and fragmental textures of tuffs, as often relationships between magma and phenocryst morphology are critical for analysing cooling, fractional crystallization and emplacement.

Analysis of intrusive rock microstructures can provide information on source and genesis, including contamination of igneous rocks by wall rocks and identifying crystals which may have been accumulated or dropped out of the melt. This is especially critical for komatiite lavas and ultramafic intrusive rocks.

General principles of igneous microstructure

Igneous microstructure is a combination of cooling rate, nucleation rate, eruption (if a lava), magma composition and its relationships to what minerals will nucleate, as well as physical effects of wall rocks, contamination and especially vapor.

Grain texture

According to the texture of the grains, igneous rocks may be classified as

Crystal shapes

Crystal shape is also an important factor in the texture of an igneous rock. Crystals may be euhedral, subeuhedral or anhedral:

Rocks composed entirely of euhedral crystals are termed panidiomorphic, and rocks composed entirely of subhedral crystals are termed subidiomorphic.

Porphyritic structure

Porphyritic structure is caused by the nucleation of crystal sites and the growth of crystals in a liquid magma. Often a magma can only grow one mineral at a time especially if it is cooling slowly. This is why most igneous rocks have only one type of phenocryst mineral. Rhythmic cumulate layers in ultramafic intrusions are a result of uninterrupted slow cooling.

When a rock cools too quickly the liquid freezes into a solid glass, or crystalline groundmass. Often vapor loss from a magma chamber will cause a porphyritic texture.

Embayments or 'corroded' margins to phenocrysts infer that they were being resorbed by the magma and may imply addition of fresh, hotter magma. Ostwald ripening is also used to explain some porphyritic igneous textures, especially orthoclase megacrystic granites.

Phenocryst shape: implications

A crystal growing in a magma adopts a habit (see crystallography) which best reflects its environment and cooling rate. The usual phenocryst habit is the ones commonly observed. This may imply a 'normal' cooling rate.

Abnormal cooling rates occur in supercooled magmas, particularly komatiite lavas. Here, low nucleation rates due to superfluidity prevent nucleation until the liquid is well below the mineral growth curve. Growth then occurs at extreme rates, favoring slender, long crystals. Additionally, at crystal vertices and terminations, spikes and skeletal shapes may form because growth is favoured at crystal edges. Spinifex or dendritic texture is an example of this result. Hence, the shape of phenocrysts can provide valuable information on cooling rate and initial magma temperature.

Spherulites

Spherulitic texture is the result of cooling and nucleation of material in a magma which has achieved supersaturation in the crystal component. Thus it is often a subsolidus process in supercooler felsic rocks. Often, two minerals will grow together in the spherulite. Axiolitic texture results from spherulitic growth along fractures in volcanic glass, often from invasion of water.

Graphic and other intergrowth textures

Intergrowths of two or more minerals can form in a variety of ways, and interpretations of the intergrowths can be critical in understanding both magmatic and cooling histories of igneous rocks. A few of the many important textures are presented here as examples.

Graphic granite from Norway SKRIFTGRANITT 03 Einerkilen-Evje.jpg
Graphic granite from Norway

Graphic, micrographic, and granophyric textures are examples of intergrowths formed during magmatic crystallization. They are angular intergrowths of quartz and alkali feldspar. When well-developed, the intergrowths may resemble ancient cuneiform writing, hence the name. These intergrowths are typical of pegmatite and granophyre, and they have been interpreted as documenting simultaneous crystallization of the intergrown minerals in the presence of a silicate melt together with a water-rich phase.

Intergrowths that form by exsolution are aids in interpreting cooling histories of rocks. Perthite is an intergrowth of K-feldspar with albite feldspar, formed by exsolution from an alkali feldspar of intermediate composition: the coarseness of perthitic intergrowths is related to cooling rate. Perthite is typical of many granites. Myrmekite is a microscopic, vermicular (worm-like) intergrowth of quartz and sodium-rich plagioclase common in granite; myrmekite may form as alkali feldspar breaks down by exsolution and silicon is transported by fluids in cooling rocks.

Iron-titanium oxides are extremely important, as they carry the predominant magnetic signatures of many rocks, and so they have played a major role in our understanding of plate tectonics. These oxides commonly have complex textures related both to exsolution and oxidation. For instance, ulvospinel in igneous rocks such as basalt and gabbro commonly oxidizes during subsolidus cooling to produce regular intergrowths of magnetite and ilmenite. The process can determine what magnetic record is inherited by the rock.

See also

Related Research Articles

<span class="mw-page-title-main">Metamorphic rock</span> Rock that was subjected to heat and pressure

Metamorphic rocks arise from the transformation of existing rock to new types of rock in a process called metamorphism. The original rock (protolith) is subjected to temperatures greater than 150 to 200 °C and, often, elevated pressure of 100 megapascals (1,000 bar) or more, causing profound physical or chemical changes. During this process, the rock remains mostly in the solid state, but gradually recrystallizes to a new texture or mineral composition. The protolith may be an igneous, sedimentary, or existing metamorphic rock.

<span class="mw-page-title-main">Metamorphism</span> Change of minerals in pre-existing rocks without melting into liquid magma

Metamorphism is the transformation of existing rock to rock with a different mineral composition or texture. Metamorphism takes place at temperatures in excess of 150 °C (300 °F), and often also at elevated pressure or in the presence of chemically active fluids, but the rock remains mostly solid during the transformation. Metamorphism is distinct from weathering or diagenesis, which are changes that take place at or just beneath Earth's surface.

<span class="mw-page-title-main">Trachyte</span> Extrusive igneous rock

Trachyte is an extrusive igneous rock composed mostly of alkali feldspar. It is usually light-colored and aphanitic (fine-grained), with minor amounts of mafic minerals, and is formed by the rapid cooling of lava enriched with silica and alkali metals. It is the volcanic equivalent of syenite.

<span class="mw-page-title-main">Extrusive rock</span> Mode of igneous volcanic rock formation

Extrusive rock refers to the mode of igneous volcanic rock formation in which hot magma from inside the Earth flows out (extrudes) onto the surface as lava or explodes violently into the atmosphere to fall back as pyroclastics or tuff. In contrast, intrusive rock refers to rocks formed by magma which cools below the surface.

<span class="mw-page-title-main">Amphibolite</span> Metamorphic rock type

Amphibolite is a metamorphic rock that contains amphibole, especially hornblende and actinolite, as well as plagioclase feldspar, but with little or no quartz. It is typically dark-colored and dense, with a weakly foliated or schistose (flaky) structure. The small flakes of black and white in the rock often give it a salt-and-pepper appearance.

<span class="mw-page-title-main">Porphyritic</span> Igneous rock with large and small crystals

Porphyritic is an adjective used in geology to describe igneous rocks with a distinct difference in the size of mineral crystals, with the larger crystals known as phenocrysts. Both extrusive and intrusive rocks can be porphyritic, meaning all types of igneous rocks can display some degree of porphyritic texture. Most porphyritic rocks have bimodal size ranges, meaning the rock is composed of two distinct sizes of crystal.

<span class="mw-page-title-main">Volcanic rock</span> Rock formed from lava erupted from a volcano

Volcanic rocks are rocks formed from lava erupted from a volcano. Like all rock types, the concept of volcanic rock is artificial, and in nature volcanic rocks grade into hypabyssal and metamorphic rocks and constitute an important element of some sediments and sedimentary rocks. For these reasons, in geology, volcanics and shallow hypabyssal rocks are not always treated as distinct. In the context of Precambrian shield geology, the term "volcanic" is often applied to what are strictly metavolcanic rocks. Volcanic rocks and sediment that form from magma erupted into the air are called "pyroclastics," and these are also technically sedimentary rocks.

<span class="mw-page-title-main">Lithology</span> Description of the physical characteristics of a rock unit

The lithology of a rock unit is a description of its physical characteristics visible at outcrop, in hand or core samples, or with low magnification microscopy. Physical characteristics include colour, texture, grain size, and composition. Lithology may refer to either a detailed description of these characteristics, or a summary of the gross physical character of a rock. Examples of lithologies in the second sense include sandstone, slate, basalt, or limestone.

<span class="mw-page-title-main">Matrix (geology)</span> Finer-grained material in a rock within which coarser material is embedded

The matrix or groundmass of a rock is the finer-grained mass of material in which larger grains, crystals, or clasts are embedded.

<span class="mw-page-title-main">Phenocryst</span> Crystal larger than the rock grains that surround it in an igneous rock

A phenocryst is an early forming, relatively large and usually conspicuous crystal distinctly larger than the grains of the rock groundmass of an igneous rock. Such rocks that have a distinct difference in the size of the crystals are called porphyries, and the adjective porphyritic is used to describe them. Phenocrysts often have euhedral forms, either due to early growth within a magma, or by post-emplacement recrystallization. Normally the term phenocryst is not used unless the crystals are directly observable, which is sometimes stated as greater than 0.5 mm (0.020 in) in diameter. Phenocrysts below this level, but still larger than the groundmass crystals, are termed microphenocrysts. Very large phenocrysts are termed megaphenocrysts. Some rocks contain both microphenocrysts and megaphenocrysts. In metamorphic rocks, crystals similar to phenocrysts are called porphyroblasts.

<span class="mw-page-title-main">Intrusive rock</span> Magmatic rock formed below the surface

Intrusive rock is formed when magma penetrates existing rock, crystallizes, and solidifies underground to form intrusions, such as batholiths, dikes, sills, laccoliths, and volcanic necks.

<span class="mw-page-title-main">Rock cycle</span> Transitional concept of geologic time

The rock cycle is a basic concept in geology that describes transitions through geologic time among the three main rock types: sedimentary, metamorphic, and igneous. Each rock type is altered when it is forced out of its equilibrium conditions. For example, an igneous rock such as basalt may break down and dissolve when exposed to the atmosphere, or melt as it is subducted under a continent. Due to the driving forces of the rock cycle, plate tectonics and the water cycle, rocks do not remain in equilibrium and change as they encounter new environments. The rock cycle explains how the three rock types are related to each other, and how processes change from one type to another over time. This cyclical aspect makes rock change a geologic cycle and, on planets containing life, a biogeochemical cycle.

<span class="mw-page-title-main">Porphyroblast</span> Large mineral crystal in a metamorphic rock

A porphyroblast is a large mineral crystal in a metamorphic rock which has grown within the finer grained matrix. Porphyroblasts are commonly euhedral crystals, but can also be partly to completely irregular in shape.

<span class="mw-page-title-main">Foliation (geology)</span> Repetitive layering in metamorphic rocks

Foliation in geology refers to repetitive layering in metamorphic rocks. Each layer can be as thin as a sheet of paper, or over a meter in thickness. The word comes from the Latin folium, meaning "leaf", and refers to the sheet-like planar structure. It is caused by shearing forces, or differential pressure. The layers form parallel to the direction of the shear, or perpendicular to the direction of higher pressure. Nonfoliated metamorphic rocks are typically formed in the absence of significant differential pressure or shear. Foliation is common in rocks affected by the regional metamorphic compression typical of areas of mountain belt formation.

<span class="mw-page-title-main">Porphyroclast</span>

A porphyroclast is a clast or mineral fragment in a metamorphic rock, surrounded by a groundmass of finer grained crystals. Porphyroclasts are fragments of the original rock before dynamic recrystallisation or cataclasis produced the groundmass. This means they are older than the groundmass. They were stronger pieces of the original rock, that could not as easily deform and were therefore not or hardly affected by recrystallisation. They may have been phenocrysts or porphyroblasts in the original rock.

<span class="mw-page-title-main">Augen</span>

Augen are large, lenticular eye-shaped mineral grains or mineral aggregates visible in some foliated metamorphic rocks. In cross section they have the shape of an eye.

<span class="mw-page-title-main">Igneous textures</span> Property of igneous rocks

Igneous textures include the rock textures occurring in igneous rocks. Igneous textures are used by geologists in determining the mode of origin of igneous rocks and are used in rock classification. The six main types of textures are phaneritic, aphanitic, porphyritic, glassy, pyroclastic, and pegmatitic.

This glossary of geology is a list of definitions of terms and concepts relevant to geology, its sub-disciplines, and related fields. For other terms related to the Earth sciences, see Glossary of geography terms.

<span class="mw-page-title-main">Igneous rock</span> Rock formed through the cooling and solidification of magma or lava

Igneous rock, or magmatic rock, is one of the three main rock types, the others being sedimentary and metamorphic. Igneous rocks are formed through the cooling and solidification of magma or lava.

References

  1. Vernon, R. H. (2004). A practical guide to rock microstructure. Cambridge University Press. ISBN   0-521-81443-X.
  2. 1 2 3 4 5 6 Texture & Genesis of Rocks, Introductory Geology Laboratory, Christopher DiLeonardo, Ph.D., Marek Cichanski, Ph.D., Earth & Space Sciences, De Anza College
  3. Higgins, M. D. (2006). Quantitative Textural Measurements in Igneous and Metamorphic Petrology. Cambridge: Cambridge University Press. ISBN   0-521-13515-X.
  4. Fu, Jinlong; Thomas, Hywel R.; Li, Chenfeng (January 2021). "Tortuosity of porous media: Image analysis and physical simulation" (PDF). Earth-Science Reviews. 212: 103439. Bibcode:2021ESRv..21203439F. doi:10.1016/j.earscirev.2020.103439. S2CID   229386129.
  5. Voznesensky, A. S.; Kidima-Mbombi, L. K. (2021-07-14). "Formation of synthetic structures and textures of rocks when simulating in COMSOL Multiphysics". Gornye Nauki I Tekhnologii = Mining Science and Technology (Russia). 6 (2): 65–72. doi: 10.17073/2500-0632-2021-2-65-72 . ISSN   2500-0632. S2CID   237797248.
  6. Essentials of Geology, 3rd Ed, Stephen Marshak
  7. Nelson, Stephen A. "Sedimentary Rocks". Tulane University - Earth & Environmental Sciences. Archived from the original on 3 July 2012. Retrieved 8 April 2021.

Further reading