USS Texas (1892)

Last updated

USS Texas2.jpg
USS Texas, photochrom print c. 1898
History
US flag 46 stars.svgUnited States
NameTexas
Namesake Texas
Ordered3 August 1886
Builder Norfolk Naval Shipyard, Portsmouth, Virginia
Laid down1 June 1889
Launched28 June 1892
Commissioned15 August 1895
Decommissioned11 February 1911
RenamedSan Marcos, 15 February 1911
Stricken10 October 1911
Nickname(s)Old Hoodoo
FateSunk as gunnery target, 21–22 March 1911
Class overview
Succeeded by Indiana class
General characteristics
Type Pre-dreadnought battleship
Displacement6,316 long tons (6,417  t) (full load) (1896)
Length308 ft 10 in (94.1 m)
Beam64 ft 1 in (19.5 m)
Draft24 ft 6 in (7.5 m)
Installed power
Propulsion
Speed17.8 knots (33.0 km/h; 20.5 mph)
Complement392 officers and men (1896)
Armament
Armor

USS Texas was a pre-dreadnought battleship built by the United States in the early 1890s. The first American battleship commissioned, [1] she was built in reaction to the acquisition of modern armored warships by several South American countries, and meant to incorporate the latest developments in naval tactics and design. This includes the mounting of her main armament en echelon to allow maximum end-on fire and a heavily-armored citadel amidships to ensure defensive strength. However, due to the state of U.S. industry at the time, Texas's building time was lengthy, and by the time she was commissioned, she was already out of date. Nevertheless, she and the armored cruiser USS Maine were considered advancements in American naval design.

Contents

Texas developed a reputation as a jinxed or unlucky ship after several accidents early in her career; she consequently earned the nickname "Old Hoodoo". [1] These mishaps included problems during construction, a grounding off Newport, Rhode Island, and flooding shortly afterwards while at dock in New York City. In the last, she settled to the bottom with her gun deck awash and several crew members drowned. She also received significant damage to her hull in drydock after being raised. Her reputation improved with her service in the Spanish–American War, [2] when she blockaded the coast of Cuba and fought in the Battle of Santiago de Cuba.

After the war, Texas returned to peacetime duty, interrupted by several refits. She became the station ship in Charleston, South Carolina, by 1908 and was renamed San Marcos in 1911 to allow her name to be used by USS Texas, a new battleship. She became a target ship that same year and was sunk in shallow water in Chesapeake Bay. She was used as a gunnery target throughout World War II and was partially demolished in 1959 because her remains were considered a navigational hazard.

Design and description

Background

Plan view of Texas from the 1900 edition of Jane's Fighting Ships. 'A' are the main guns and 'D' shows the locations of the six-inch guns USSTexas(1892)Diagram.png
Plan view of Texas from the 1900 edition of Jane's Fighting Ships. 'A' are the main guns and 'D' shows the locations of the six-inch guns

The delivery of the Brazilian battleship Riachuelo in 1883 and the acquisition of other armored warships by Brazil, Argentina, and Chile shortly afterward alarmed the United States government, as the Brazilian Navy was now the most powerful in the Western Hemisphere. The United States Navy now felt capable only of defending its own ports. The Chairman of the House Naval Affairs Committee, Congressman Hilary A. Herbert characterized the situation thus: "if all this old navy of ours were drawn up in battle array in mid-ocean and confronted by the Riachuelo it is doubtful whether a single vessel bearing the American flag would get into port." [3]

The Navy Advisory Board, confronted with the possibility of hostile ironclads operating off the American coast, began planning for a pair of ships to protect that coast in 1884. Both had to fit within existing docks and had to have a shallow draft to enable them to use all the major American ports and bases. They had to have a minimum speed of 17 knots (31 km/h; 20 mph) and were to displace about 6,000 long tons (6,096 t). They were both optimized for end-on fire and had their gun turrets sponsoned out over the sides of the ship and echeloned to allow them to fire across the deck, much like the battleships Riachuelo and Aquidabã. The first ship, laid down for the then-traditional cruiser mission of battleship substitute on overseas deployment and armed with four 10 in (250 mm) guns, became Maine. The other, armed with two 12 in (300 mm) guns, became Texas, [4] the first ship named in honor of that state to be built by the United States. [lower-alpha 1]

The Navy Department conducted an international design competition for Texas and the winner was the Naval Construction & Armaments Co. of Barrow-in-Furness, England. The winning design placed Texas's forward turret on the port side and her aft turret to starboard. The need for cross-deck fire caused the superstructure to be separated into three pieces to allow for each gun to fire between the sections of the superstructure. This significantly limited the gun's ability to fire to the opposite beam as the superstructure still restricted each gun's arc of fire. [5] Furthermore, neither the deck nor the superstructure was reinforced to withstand the muzzle blast as the gun fired, as demonstrated during the Battle of Santiago de Cuba when her starboard deck was damaged. [2]

Even five years before Texas was complete, the blast effects from end-on fire were considered prohibitive and en echelon mounting of main guns was abandoned in European navies and new American builds. This made Texas's armament arrangement obsolete. The Bureau of Construction and Repair in conjunction with the newly established Board on Construction, considered a thorough re-design which would have placed Texas's main guns on the centerline, either in two single turrets or one twin turret, and the heavy redoubt eliminated. Construction by this time was too far advanced for such a plan, however, and Navy Secretary Benjamin Tracy limited the Board to detail improvements. [6]

General characteristics

Texas was 308 feet 10 inches (94.1 m) long overall. She had a beam of 64 feet 1 inch (19.5 m) and a maximum draft of 24 feet 6 inches (7.5 m). She displaced 6,315 long tons (6,416  t ) at full load as built. [7] Her hull had two wing compartments on each side of her machinery spaces as well as a centerline longitudinal watertight bulkhead separating the engines and boilers. Asymmetric flooding of the wing compartments posed a grave danger to her stability. [8] Her double bottom protected most of her hull and extended up the side to the lower edge of the armor deck. [9] She had a metacentric height of 2.54 feet (0.8 m) and was fitted with a ram bow. [7]

Propulsion

Texas's machinery was built by the Richmond Locomotive and Machine Works of Richmond, Virginia. [1] She had two inverted vertical triple-expansion steam engines with a total designed output of 8,610 indicated horsepower (6,420  kW ), each driving one propeller shaft using steam provided by four double-ended cylindrical boilers at a working pressure of 175  psi (1,210  kPa ; 12.3  kgf/cm2 ). On trials, she reached a speed of 17.8 knots (33.0 km/h; 20.5 mph), exceeding her contract speed of 17 knots (31 km/h; 20 mph). [7] She carried a maximum load of 877 short tons (796 t) of coal. [10] She carried two Edison electric dynamos to power her searchlights and provide interior lighting. [11]

Armament

Texas's main armament consisted of two 12-inch (305 mm)/35 caliber Mark I guns mounted in single Mark 2 hydraulically powered turrets inside her armored redoubt. These guns had a maximum elevation of 15° and could depress to −5°. Eighty rounds per gun were carried. They fired a 870-pound (394.6 kg) shell at a muzzle velocity of 2,100 ft/s (640 m/s) to a range of about 12,000 yards (11,000 m) at maximum elevation. [12] The fixed rammers were below and outside the turrets. Initially, they could only be loaded at one positions, dead-ahead and at 0° elevation, but they were modified to load at all angles of train just before the start of the Spanish–American War. [13]

Four of the six 6-inch (152 mm) guns were mounted in casemates in the hull and the other two were mounted on the main deck in open pivot positions. [13] The two main deck guns were 35-caliber weapons, while the casemate guns were 30-caliber guns. Data is lacking, but they could probably depress to −7° and elevate to +12°. They fired shells that weighed 105 pounds (47.6 kg) with a muzzle velocity of about 1,950 ft/s (590 m/s). They had a maximum range less than 9,000 yd (8,200 m) when fired at maximum elevation. [14]

The antitorpedo boat armament consisted of a dozen 57 mm (2.2 in) six-pounder guns (of unknown type) in casemates spaced along the hull. [7] They fired a shell weighing about 6 lb (2.7 kg) at a muzzle velocity of about 1,765 ft/s (538 m/s) at a rate of 20 rounds per minute. Their range was less than 8,700 yd (8,000 m). [15] Two 37 mm (1.5 in) Hotchkiss five-barrel revolving guns each were mounted on the fore and aft superstructures. In addition, two 37-mm Driggs-Schroeder one-pounder guns were mounted in each fighting top. [16] They fired a shell weighing about 1.1 lb (0.50 kg) at a muzzle velocity of about 2,000 ft/s (610 m/s) to a range about 3,500 yd (3,200 m). They had a rate of fire of about 30 rounds per minute. [17]

Texas carried four 14-inch (356 mm) torpedo tubes, all above water. One tube each was in the bow and stern and another on each side, towards the rear of the hull. [7] She was originally intended to carry two small steam torpedo boats, each with a one-pounder gun, and a trainable torpedo tube, but they were cancelled after the poor performance of the boat built for the Maine. [11]

Armor

Texas prior to the Spanish-American War USS Texas (1895-1911).jpg
Texas prior to the Spanish–American War

The main waterline belt, made of Harvey armor, had a maximum thickness of 12 inches and tapered to 6 inches (152 mm) at its lower edge. It was 188 feet (57.3 m) long and covered the machinery spaces. It was 7 feet (2.1 m) high, of which 3 feet (0.9 m) was above the design waterline. It angled inwards for 17 feet (5.2 m) at each end, thinning to 8 inches (203 mm), to provide protection against raking fire. It sloped downwards to meet the top of the protective deck. It was 2 inches (51 mm) thick and sloped downwards at the ends of the ship. It also sloped downwards to the sides, but its thickness increased to 3 inches (76 mm). A 12-inch-thick diagonal armored citadel on the gun deck protected the turret machinery and the supports of the conning tower. The deck above it was two inches thick. [18] [19]

The sides of the circular turrets were 12 inches thick, and they had 1-inch-thick (25 mm) roofs. The conning tower had 9-inch (23 cm) walls. Turret hoists, voicepipes and electrical leads were protected by armored tubes. The lateral hydraulic pipes that ran along the underside of the gun deck were initially unprotected, but armored tubes were installed to protect them during Texas's 1902 refit. Along the center of the ship, they were one inch thick, but increased to two inches closer to the sides of the ship. [20] [21]

No light armor was fitted above the main belt or at either end of the ship. This made Texas highly vulnerable to rapid-fire guns using high-explosive shells. This was not considered a significant threat at the time Texas was designed but would become so within a few years. [22]

Construction

Texas was authorized by the U.S. Congress on 3 August 1886. [23] The start of construction was delayed for nearly eight months over concerns about her stability and general characteristics. [1] Her keel was laid down on 1 June 1889, at Portsmouth, Virginia, by the Norfolk Navy Yard. She was launched on 28 June 1892, sponsored by Miss Madge Houston Williams, granddaughter of Sam Houston; and commissioned on 15 August 1895, with Captain Henry Glass in command. [24]

Service

Early years

When drydocked in the New York Navy Yard for the first time after her trials several structural flaws came to light. The floors had buckled their brackets and the cement near the keel had cracked. Her floor brackets were reinforced with 4 in × 4 in (10 cm × 10 cm) angle iron and the cement was repaired. But this raised issues regarding her structural integrity so a Board of Survey in January 1896 was formed to evaluate her condition and suggest improvements. The Board determined that further strengthening of her hull was needed, but the exact measures taken are not known, although they would cost $39,450 and take 100 working days. However, the Board wished to know what effect these changes would have on the draft, stability, and metacentric height of the Texas. The Board received a reply on 4 February that they would increase her displacement by 31 long tons (31 t), deepen her draft by less than 2 in (51 mm) and raise her metacentric height to 2.76 ft (0.84 m). [25]

The ship ran aground near Newport, Rhode Island, in September 1896. Operator error combined with signal failure were blamed. A few officers, including future Governor of Guam Alfred Walton Hinds, were publicly reprimanded. [26] While under repairs in New York, the yoke that secured the main injection valve in the starboard engine room broke on 9 November 1896. Water pressure unseated the valve and allowed the compartment to flood as the receiving pipe had earlier been removed for repair. Leaks in the watertight doors, voicepipes and holes in the bulkheads for electrical cables allowed the flooding to spread to the other engine and boiler rooms, the coal bunkers adjacent to them, as well as most of the magazines and shell rooms. The ship settled to the bottom, but the water was so shallow as to aid salvage efforts. By the 11th most of the water had been pumped out, but she was still drawing too much water to enter the drydock. An estimated 300 short tons (270 t) of coal would have to be removed to lighten Texas enough to enter the drydock. [27]

After repairs Texas was assigned to the North Atlantic Squadron, and patrolled the Eastern Seaboard of the United States. In February 1897, she left the Atlantic for a brief cruise to the Gulf coast ports of Galveston, Texas, and New Orleans. [24] She arrived in Galveston on 16 February 1897 and anchored in 6 fathoms (36  ft ; 11  m ) of water. The local pilot assured her captain that this was the best berth in the harbor for a ship of Texas's length. However a strong tide swung her around onto a mud bank and held there. She was not able to get herself off and even the assistance of the U.S. Revenue Steamer Galveston was to no effect. Late the next day she was hauled off by the use of her port anchor and a tug. [28] These two incidents gave her a reputation as being a jinxed or unlucky ship and earned her the nickname "Old Hoodoo". [1]

She returned to the Eastern Seaboard in March 1897 and remained there until the beginning of 1898. [24] During this period, her bow and stern torpedo tubes were removed in June 1897 and additional telescopic sights were added to her turret roofs between 14 July and 12 August. [29] At the beginning of 1898, she visited Key West, Florida, and the Dry Tortugas en route to Galveston for a return visit, which she made in mid-February. Returning to the Atlantic via the Dry Tortugas in March, she arrived in Hampton Roads on 24 March and resumed duty with the North Atlantic Squadron. [24]

Spanish–American War

Texas in Cuban waters, May-July 1898 USS Texas in Cuba waters.jpg
Texas in Cuban waters, May–July 1898

Early in the spring, war between the United States and Spain erupted over conditions in Cuba and the supposed Spanish destruction of Maine in Havana harbor in February 1898. By 18 May, under the command of Captain J. W. Philip, Texas was at Key West, readying to prosecute that war. [24]

On 21 May, the battleship arrived off Cienfuegos, Cuba, with the Flying Squadron to blockade the Cuban coast. After a return to Key West for coal, Texas arrived off Santiago de Cuba on 27 May. She patrolled off that port until 11 June, when she made a reconnaissance mission to Guantánamo Bay in support of the Marine landings there. The next day the Texas landed three field pieces and two M1895 Colt–Browning machine guns at the request of the Marine expeditionary commander, Lt. Col. Robert W. Huntington. [lower-alpha 2] For the next five weeks, the Texas patrolled between Santiago de Cuba and Guantánamo Bay. On 16 June, the warship joined the cruiser Marblehead for a bombardment of the fort on South Toro Cay in Guantánamo Bay. The two ships opened fire just after 14:00 and ceased fire about an hour and 16 minutes later, having reduced the fort to impotency. [24]

On 3 July, she was steaming off Santiago de Cuba when the Spanish Fleet under Admiral Cervera attempted to escape past the American Fleet. Texas took four of the enemy ships under fire immediately. While the battleship's main battery pounded the armored cruisers Vizcaya and Cristobal Colon, her secondary battery joined Iowa, Gloucester, and Indiana in battering two torpedo-boat destroyers. [24]

"The two Spanish destroyers fell out of the action quickly and beached themselves, damaged heavily. One by one, the larger enemy warships also succumbed to the combined fire of the American Fleet. Each, in turn, sheered off toward shore and beached herself. Thus, Texas and the other ships of the Flying Squadron annihilated the Spanish Fleet." [24] Texas was lightly damaged during the battle by a single 6 in (152 mm) high explosive shell that hit her on the starboard side above the main deck, immediately forward of the ash hoist. Fragments from the shell badly damaged the ash hoist and destroyed the doors of both air shafts and the adjacent bulkheads. Splinters riddled much of the adjacent structure as well. [2]

"The defeat of Cervera's Fleet helped to seal the doom of Santiago de Cuba. The city fell to the besieging American forces on 17 July, just two weeks after the great American naval victory. The day after the surrender at Santiago, Spain sought peace through the good offices of the French government. Even before the peace protocol was signed in Washington, DC, on 12 August, American ships began returning home. Texas arrived in New York on 31 July. Captain Philip was promoted to Commodore on 10 August 1898." [24]

"In late November, Texas moved south to Hampton Roads where she arrived on 2 December. The warship resumed her peacetime routine patrolling the Atlantic coast of the United States. Though her primary field of operations once again centered on the northeastern coast, she also made periodic visits to such places as San Juan, Puerto Rico, and Havana, Cuba, where her crew could view some of the results of their own ship's efforts in the recent war." [24]

Post-war service

USS Texas at Brooklyn Navy Yard circa 1903 USS Texas LOC det.4a15442u.jpg
USS Texas at Brooklyn Navy Yard circa 1903

Texas was decommissioned for a lengthy refit on 3 November 1900 at the Norfolk Navy Yard but was commissioned again on 3 November 1902. [23] During this refit, her funnel and topmasts were raised. Furthermore, the protection for her 12 in (300 mm) ammunition hoists was doubled and her broadside torpedo tubes were removed. [30] On one voyage to New Orleans in February 1904, Texas could only make 13.9 knots (25.7 km/h; 16.0 mph) under forced draft. [2] During 1904 her armament was upgraded when she exchanged her four 6 in (150 mm)/30 cal guns for more powerful 35-caliber weapons and two one-pounder guns were landed. She served as flagship for the Coast Squadron until 1905, and remained assigned to it after its commander shifted his flag. [24]

Texas was briefly decommissioned between 11 January 1908 and 1 September 1908. [23] By 1908 she had become the station ship at Charleston, South Carolina. [24] By 1910, she had lost her 37 mm (1.5 in) revolving cannon and one more one-pdr gun in exchange for two additional six-pounder guns. [7] Regarded as obsolete by 1911, she was relegated for use as a gunnery target to allow the Navy to evaluate the effects of modern shells on armored and unarmored parts of the ship, the probabilities of underwater hits and their depths, the effects of shock loads on pipes, etc., the flammability of the ship's fittings and the direction in which shells were pointing when striking at long range. As part of this evaluation, she was fully fitted out and only items which normally would have been allowed to be removed before action and those items added to her for service as a station ship were removed. Dummies were also rigged to evaluate the effects of hits on the crew. It is uncertain if her ammunition and powder remained on board for the tests. Preparing Texas for these tests cost $29,422.70. [31]

San Marcos

"On 15 February 1911, her name was changed to San Marcos to allow the name Texas to be assigned to Battleship No. 35." [24] She was sunk in shallow water in Tangier Sound in Chesapeake Bay on 21–22 March 1911 by gunfire from the battleship New Hampshire. No detailed examination was made afterward, but it was noted that there were so many holes below the waterline that the water in the forward and rear compartments generally took on the motion of the outside water. The interior above the waterline was generally demolished. She was used as a target for a torpedo experiment on 6 April. [32] "On 10 October 1911, her name was struck from the Naval Vessel Register." [24] A cage mast, a duplicate of those used on the Florida-class dreadnoughts, was built atop the San Marcos's remains in 1912 and tested against 12-inch (305 mm) shells fired by the monitor Tallahassee from a range of 1,000 yards (910 m) on 21 August 1912. Although the mast had been knocked down by nine hits, it was considered to have withstood the fire exceedingly well. [33]

San Marcos was used for gunnery practice throughout World War II, although generally as an anchor for a canvas target screen. Sitting two to six feet below the surface and marked by an unlit buoy, she was responsible for the sinking of the cargo ship Lexington in 1940 following a collision. [34] Tons of explosives were used to demolish her upperworks and drive her hull deep into the mud; by January 1959, they were successful and she remains there today. [7]

Related Research Articles

USS <i>Oregon</i> (BB-3) Indiana-class pre-dreadnought battleship of the United States Navy

USS Oregon (BB-3) was the third and final member of the Indiana class of pre-dreadnought battleships built for the United States Navy in the 1890s. The three ships were built as part of a modernization program aimed at strengthening the American fleet to prepare for a possible conflict with a European navy. Designed for short-range operations in defense of the United States, the three Indiana-class ships had a low freeboard and carried a main battery of four 13-inch (330 mm) guns in a pair of gun turrets. Oregon and her sister ships were the first modern battleships built for the United States, though they suffered from significant stability and seakeeping problems owing to their small size and insufficient freeboard.

USS <i>Indiana</i> (BB-1) Battleship of the United States Navy

USS Indiana was the lead ship of her class and the first battleship in the United States Navy comparable to foreign battleships of the time. Authorized in 1890 and commissioned five years later, she was a small battleship, though with heavy armor and ordnance. The ship also pioneered the use of an intermediate battery. She was designed for coastal defense and as a result, her decks were not safe from high waves on the open ocean.

USS <i>Iowa</i> (BB-4) Pre-dreadnought battleship of the United States Navy

USS Iowa was a pre-dreadnought battleship built for the United States Navy in the mid-1890s. The ship was a marked improvement over the previous Indiana-class battleships, correcting many of the defects in the design of those vessels. Among the most important improvements were significantly better seaworthiness owing to her greater freeboard and a more efficient arrangement of the armament. Iowa was designed to operate on the high seas, which had been the impetus to increase the freeboard. She was armed with a battery of four 12-inch (305 mm) guns in two twin-gun turrets, supported by a secondary battery of eight 8-inch (203 mm) guns.

USS <i>Maine</i> (1889) Battleship of the United States Navy

Maine was a United States Navy ship that sank in Havana Harbor on February 15, 1898, contributing to the outbreak of the Spanish–American War in April. U.S. newspapers, engaging in yellow journalism to boost circulation, claimed that the Spanish were responsible for the ship's destruction. The phrase, "Remember the Maine! To hell with Spain!" became a rallying cry for action. Although the Maine explosion was not a direct cause, it served as a catalyst that accelerated the events leading up to the war.

USS <i>Massachusetts</i> (BB-2) Indiana-class battleship of the United States Navy

USS Massachusetts was an Indiana-class, pre-dreadnought battleship and the second United States Navy ship comparable to foreign battleships of its time. Authorized in 1890, and commissioned six years later, she was a small battleship, though with heavy armor and ordnance. The ship class also pioneered the use of an intermediate battery. She was designed for coastal defense and as a result, her decks were not safe from high waves on the open ocean.

USS <i>New Hampshire</i> (BB-25) Pre-dreadnought battleship of the United States Navy

New Hampshire (BB-25) was the sixth and final Connecticut-class pre-dreadnought battleship, the last vessel of that type built for the United States Navy. Like most contemporary battleships, she was armed with an offensive armament that consisted of four large-caliber 12-inch (305 mm) guns and several medium-caliber 7 and 8-inch guns. The ship was laid down in May 1905, launched in June 1906, and commissioned in March 1908, a little over a year after the revolutionary all-big-gun HMS Dreadnought rendered ships like New Hampshire obsolescent.

USS <i>Washington</i> (BB-47) Cancelled dreadnought battleship of the United States Navy

USS Washington (BB-47), a Colorado-class battleship, was the second ship of the United States Navy named in honor of the 42nd state. Her keel was laid down on 30 June 1919, at Camden, New Jersey, by the New York Shipbuilding Corporation. She was launched on 1 September 1921, sponsored by Miss Jean Summers, the daughter of Congressman John W. Summers of Washington.

USS <i>Kearsarge</i> (BB-5) Kearsarge-class pre-dreadnought battleship

USS Kearsarge (BB-5), was a pre-dreadnought battleship of the United States Navy and lead ship of her class of battleships. She was named after the sloop-of-war Kearsarge, famous for sinking the CSS Alabama, and was the only United States Navy battleship not named after a state.

USS <i>Kentucky</i> (BB-6) Kearsarge-class pre-dreadnought battleship of the United States Navy

USS Kentucky (BB-6), was the second and final Kearsarge-class pre-dreadnought battleship built for the United States Navy in the 1890s. Designed for coastal defense, the Kearsarge-class battleships had a low freeboard and heavy armor. The ships carried an armament of four 13-inch (330 mm) and four 8-inch (203 mm) guns in an unusual two-story turret arrangement. The Newport News Shipbuilding Company of Virginia laid down her keel on 30 June 1896. She was launched on 24 March 1898 and was commissioned on 15 May 1900.

<i>Indiana</i>-class battleship Pre-dreadnought battleship class of the United States Navy

The Indiana class was a class of three pre-dreadnought battleships launched in 1893. These were the first battleships built by the United States Navy comparable to contemporary European ships, such as the British HMS Hood. Authorized in 1890 and commissioned between November 1895 and April 1896, these were relatively small battleships with heavy armor and ordnance that pioneered the use of an intermediate battery. Specifically intended for coastal defense, their freeboard was insufficient to deal well with the waves of the open ocean. The turrets lacked counterweights, and the main belt armor was placed too low to be effective under most conditions.

<i>Iowa</i>-class battleship Fast battleship class of the United States Navy

The Iowa class was a class consisting of six fast battleships ordered by the United States Navy in 1939 and 1940. They were initially intended to intercept fast capital ships such as the Japanese Kongō class and serve as the "fast wing" of the U.S. battle line. The Iowa class was designed to meet the Second London Naval Treaty's "escalator clause" limit of 45,000-long-ton (45,700 t) standard displacement. Beginning in August 1942, four vessels, Iowa, New Jersey, Missouri, and Wisconsin, were completed; two more, Illinois and Kentucky, were laid down but canceled in 1945 and 1958, respectively, before completion, and both hulls were scrapped in 1958–1959.

<span class="mw-page-title-main">16-inch/50-caliber Mark 7 gun</span> Naval gun

The 16"/50 caliber Mark 7 – United States Naval Gun is the main armament of the Iowa-class battleships and was the planned main armament of the cancelled Montana-class battleship.

<i>Colorado</i>-class battleship Dreadnought battleship class of the United States Navy

The Colorado-class battleships were a group of four United States Navy super-dreadnoughts, the last of its pre-Treaty battleships. Designed during World War I, their construction overlapped the end of that conflict and continued in its immediate aftermath. Though all four keels were laid, only three ships entered service: Colorado, Maryland, and West Virginia. Washington was over 75% completed when she was canceled under the terms of the Washington Naval Treaty in 1922. As such, the 16" gun Colorado-class ships were the last and most powerful battleships built by the U.S. Navy until the North Carolina class entered service on the eve of World War II.

<i>Kearsarge</i>-class battleship Pre-dreadnought battleship class of the United States Navy

The Kearsarge-class was a group of two pre-dreadnought battleships built for the United States Navy in the 1890s. The two ships—USS Kearsarge and USS Kentucky—represented a compromise between two preceding battleship designs, the low-freeboard Indiana class and the high-freeboard USS Iowa, though their design also incorporated several improvements. Their primary advances over earlier designs consisted of new quick-firing guns and improved armor protection, but their most novel feature was their two-story gun turrets that consisted of a secondary 8-inch (203 mm) gun turret fixed to the top of their primary 13-inch (330 mm) turrets. The ships suffered from a number of problems, however, including a tertiary battery mounted too low in the hull and poorly-designed turrets, though the latter were attempted again with the Virginia class in the early 1900s, also with negative results.

<i>Mississippi</i>-class battleship Class of American pre-dreadnoughts

The Mississippi class of battleships comprised two ships which were authorized in the 1903 naval budget: Mississippi and Idaho; these were named for the 20th and 43rd states, respectively. These were the last pre-dreadnought battleships to be designed for the United States Navy, but not the last to be built, because one more ship of a prior design was completed later under the 1904 naval budget. While the quality and technology of the weaponry and armor were first-rate, these ships included a variety of main, intermediate, secondary, and tertiary gun sizes in a predreadnought configuration which became obsolete before the ships were completed.

<i>Pennsylvania</i>-class cruiser Class of American naval ships

The Pennsylvania class of six armored cruisers served in the United States Navy from 1905 to 1927. All six were renamed for cities 1912–1920, to make the state names available for the new battleships beginning with the Pennsylvania-class battleships. All of these served during World War I, with California being the only ship of the class to be lost. The remaining five armored cruisers were scrapped between 1930 and 1931 in accordance with the London Naval Treaty.

<i>Delaware</i>-class battleship Dreadnought battleship class of the United States Navy

The Delaware-class battleships of the United States Navy were the second class of American dreadnoughts; the class comprised two ships: Delaware and North Dakota. With this class, the 16,000 long tons (16,257 t) limit imposed on capital ships by the United States Congress was waived, which allowed designers at the Navy's Bureau of Construction and Repair to correct what they considered flaws in the preceding South Carolina class and produce ships not only more powerful but also more effective and rounded overall. Launched in 1909, these ships became the first in US naval history to exceed 20,000 long tons (20,321 t).

<i>Tennessee</i>-class cruiser Class of American naval ships

The Tennessee-class cruisers were four armored cruisers built for the United States Navy between 1903 and 1906. Their main armament of four 10-inch (254 mm) guns in twin turrets was the heaviest carried by any American armored cruiser. Their armor was thinner than that of the six Pennsylvanias which immediately preceded them, a controversial but inevitable decision due to newly imposed congressional restraints on tonnage for armored cruisers and the need for them to be able to steam at 22 knots. However, the fact their armor covered a wider area of the ship than in the Pennsylvanias and their increased firepower caused them to be seen by the Navy as an improvement.

<span class="mw-page-title-main">16-inch/45-caliber Mark 6 gun</span> Naval gun

The 16"/45-caliber Mark 6 gun is a naval gun designed in 1936 by the United States Navy for their Treaty battleships. It was introduced in 1941 aboard their North Carolina-class battleships, replacing the originally intended 14"/50-caliber Mark B guns and was also used for the follow-up South Dakota class. These battleships carried nine guns in three three-gun turrets. The gun was an improvement to the 16"/45-caliber Mark 5 guns used aboard the Colorado class, and the predecessor to the 16"/50-caliber Mark 7 gun used aboard the Iowa class.

References

Explanatory notes

  1. The Confederacy built a twin-screw ironclad named Texas during the American Civil War, but she was the first United States ship to carry the name. See DANFS Texas (1892).
  2. The USS Texas landed three field pieces and two additional M1895 Colt–Browning machine guns on 12 June, the latter procured from the ship's own armory. See Venzon 1992, p.  8

Citations

  1. 1 2 3 4 5 Reilly & Scheina 1980, p. 35.
  2. 1 2 3 4 Allen 1993, p. 244.
  3. Reilly & Scheina 1980, p. 21.
  4. Reilly & Scheina 1980, pp. 21, 33, 35.
  5. Reilly & Scheina 1980, p. 22, 24.
  6. Friedman 1985, p. 20.
  7. 1 2 3 4 5 6 7 Reilly & Scheina 1980, p. 48.
  8. Reilly & Scheina 1980, p. 42.
  9. Allen 1993, pp. 226–227.
  10. Allen 1993, p. 238.
  11. 1 2 Reilly & Scheina 1980, p. 39.
  12. NavWeaps 12"/35 Mark 1 and Mark 2.
  13. 1 2 Reilly & Scheina 1980, p. 36.
  14. NavWeaps 6"/30,35,40 Marks 1, 2, 3, 4 and 7.
  15. NavWeaps 6-pdr Marks 1 through 13.
  16. Reilly & Scheina 1980, pp. 36, 44.
  17. NavWeaps 1-pdr Marks 1 through 15.
  18. Reilly & Scheina 1980, p. 37.
  19. Allen 1993, pp. 227, 229.
  20. Reilly & Scheina 1980, pp. 37–38.
  21. Allen 1993, pp. 227, 229, 231.
  22. Friedman 1985, p. 21.
  23. 1 2 3 Reilly & Scheina 1980, p. 19.
  24. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 DANFS Texas (1892).
  25. Allen 1993, pp. 238–39.
  26. The New York Times& 21 October 1896.
  27. Allen 1993, p. 239.
  28. Allen 1993, pp. 239, 241.
  29. Allen 1993, p. 242.
  30. Reilly & Scheina 1980, pp. 45–46.
  31. Allen 1993, pp. 247–48.
  32. Allen 1993, p. 250.
  33. Allen 1993, p. 256.
  34. "Baltimore, Crisfield & Onancock Line v. United States, 140 F.2d 230 (4th Cir. 1944)". Justia Law. Retrieved 24 September 2017.

Bibliography

Online sources

37°43′10″N76°05′00″W / 37.71944°N 76.08333°W / 37.71944; -76.08333