Albatros C.V

Last updated
Albatros C.V
C.VI.jpg
RoleReconnaissance aircraft
Manufacturer Albatros Flugzeugwerke
Primary user Luftstreitkräfte
Number built~400

The Albatros C.V was a military reconnaissance aircraft designed and produced by the German aircraft manufacturer Albatros Flugzeugwerke.

Contents

It was developed to make use of the newly-available Mercedes D.IV eight-cylinder engine. While the C.V drew greatly upon the company's previous aircraft, it featured greater use of balanced flight control surfaces and a new tail design. These changes also resulted in a heavier aircraft than its predecessors. Initially internally designated C.V/16, initial flight testing found that the aircraft's performance was lacking, particularly in terms of the flight controls being cumbersome and demanding, thus redesign work commenced. The resulting aircraft, which was designated C.V/17 by the company, showed improved handling and thus proceeded into quantity production.

The Luftstreitkräfte promptly accepted delivery of the type, using it active combat during the First World War. However, the unreliable Mercedes D.IV engine hurt aircraft availability and its manufacturer was unable to resolve the engine issues. Instead, production of the power plant stopped, leaving the C.V without an engine, thus forcing an early end of production of the type. It was replaced by the Albatros C.VII while existing C.Vs were quickly withdrawn from service due to the engine issues.

Design and development

The availability of a powerful new eight-cylinder engine in the form of the Mercedes D.IV was a major impetus for the development of the C.V. [1] Albatros Flugzeugwerke had quickly determined that the increased weight and length of the engine made it unpractical to install upon its existing airframes without a redesign. Numerous changes from its immediate predecessors were enacted by the design team, such as the decision to almost entirely enclose the engine with removable panels; further aerodynamic improvements were achieved via the addition of a sizable blunt spinner. [1]

The fuselage of the C.V was largely reminiscent of the Albatros C.III and various other prior aircraft by the company, consisting of slab-sided plywood construction; deviations included the somewhat more spacious arrangement and the use of an integral vertical fin, which was also covered with plywood. [1] For the first time on an operational Albatros-designed twin-seat aircraft, a balanced rudder was used, which had a steel tube structure and fabric covering. The elevator, while remaining unbalanced, was redesigned to use a one-piece control system without any division. [1] Armament comprised a forward-firing machine gun that was aligned with a gun synchronizer in addition to the single 7.92 mm (0.312 in) Parabellum MG14 machine gun on a rotating mounting that was operated by the observer; it could also carry bombs and be furnished with a radio set dependent upon mission role. [2]

Albatros C.V with crew, circa 1917 German military biplane Albatros C.V with crew LCCN2018646056.jpg
Albatros C.V with crew, circa 1917

The wings had a greater span than that of the C.III while the chord of the lower wing was increased to match the upper wing, but otherwise followed the same general configuration. [3] The undercarriage of the C.V was of a conventional design, its structure largely comprising steel tubing, in conjunction with an externally-spring tailskid mounted on inverted pyramidal struts. Engine cooling was originally achieved via radiators fitted to the sides of the forward fuselage just above the leading edge of the lower wing; their presence somewhat detracted from the overall cleanliness of the airframe. [3]

Primarily due to the increased weight and size of the C.V, early flight testing found that the aircraft was demanding and somewhat cumbersome to fly, to the extent that the design team opted to make numerous changes to the design, the original configuration being referred to as the C.V/16. [3] Albatros elected to reorientate the exhaust manifold from a horizontal to a sideways position, while a new aerofoil-shaped radiator arrangement installed within the center-section of the upper wing. Perhaps the most substantial element of the redesign was the adoption of an entirely new lower wing, which had an elliptical tip profile; the ailerons of the upper wing were also altered, adopting large rectangular balanced sections. [4] Balanced elevators were also adopted along with an internally-sprung tailskid. [2]

The redesigned aircraft, which had the factory designation of C.V/17, possessed improved performance and superior handling characteristics. [2] The C.V was Albatros' first revision of their B- and C-type reconnaissance aircraft since Ernst Heinkel's departure from the firm to join rival aircraft manufacturer Hansa-Brandenburg.[ citation needed ]

Operational history

The Luftstreitkräfte introduced the revised C.V, but quickly became dissatisfied with its performance, being unable to match the reliability of the Albatros D.III. [2] This was largely attributable to the continuous and serious issues of its Mercedes D.IV engine, which frequently suffered from crankshaft failures amongst other troubles. Unable to overcome this pitfall, production of the engine was terminated, which also forced production of the C.V to be ended after the completion of no more than 424 aircraft. [2] It was promptly replaced in production by the Albatros C.VII. [5]

Variants

C.V/16
Original design with radiators on fuselage sides.
C.V/17
Revised aircraft with radiator on upper wing, and redesigned lower wing.

Operators

Flag of the German Empire.svg  German Empire

Specifications (C.V)

Data fromGerman Aircraft of the First World War [6]

General characteristics

Performance

Armament

See also

Related Research Articles

<span class="mw-page-title-main">AEG C.IV</span> Type of aircraft

The AEG C.IV was a two-seat biplane reconnaissance aircraft designed and produced by the German aircraft manufacturer Allgemeine Elektrizitäts-Gesellschaft.

<span class="mw-page-title-main">AEG C.V</span> Type of aircraft

The AEG C.V was a prototype two-seat biplane reconnaissance aircraft of World War I. Designed to use a more powerful engine than previous AEG C-class reconnaissance aircraft, results were disappointing enough that further development was cancelled.

<span class="mw-page-title-main">AEG G.IV</span> Type of aircraft

The AEG G.IV was a biplane bomber aircraft designed and produced by the German aircraft manufacturer Allgemeine Elektrizitäts-Gesellschaft. It saw action during the First World War with the Luftstreitkräfte.

<span class="mw-page-title-main">AEG J.I</span> Type of aircraft

The AEG J.I was a German biplane ground attack aircraft designed and produced by the German aircraft manufacturer Allgemeine Elektricitäts-Gesellschaft. It was a mission-specific derivative of the AEG C.IV reconnaissance aircraft.

<span class="mw-page-title-main">Albatros C.III</span> Type of aircraft

The Albatros C.III was a twin-seat general-purpose biplane designed and produced by the German aircraft manufacturer Albatros Flugzeugwerke. It was produced in greater numbers than any other C-type aircraft by Albatros as well as being the company's most-produced twin-seat aircraft.

<span class="mw-page-title-main">Albatros C.I</span> 1910s German aircraft

The Albatros C.I,, was a twin-seat general-purpose biplanes designed and produced by the German aircraft manufacturer Albatros Flugzeugwerke. It was the first of the successful C-series aircraft operated by the Luftstreitkräfte.

<span class="mw-page-title-main">Albatros B.II</span> Type of aircraft

The Albatros B.II, was an unarmed two-seat reconnaissance biplane designed and produced by the German aircraft manufacturer Albatros Flugzeugwerke. It was the aircraft that brought Albatros Flugzeugwerke to the world's attention.

<span class="mw-page-title-main">Pfalz D.III</span> Type of aircraft

The Pfalz D.III was a fighter aircraft used by the Luftstreitkräfte during the First World War. The D.III was the first major original design from Pfalz Flugzeugwerke. Though generally considered inferior to contemporary Albatros and Fokker fighters, the D.III was widely used by the Jagdstaffeln from late 1917 to mid-1918. It continued to serve as a training aircraft until the end of the war.

<span class="mw-page-title-main">AGO C.IV</span> German biplane reconnaissance aircraft

The AGO C.IV was a German biplane reconnaissance aircraft designed and produced by the German aircraft manufacturer AGO Flugzeugwerke. It was active with the Luftstreitkräfte during the latter half of the First World War.

<span class="mw-page-title-main">Albatros C.VII</span> Type of aircraft

The Albatros C.VII was a military reconnaissance aircraft designed and produced by the German aircraft manufacturer Albatros Flugzeugwerke. It was a revised and re-engined development of the Albatros C.V, which had proved disappointing in service.

<span class="mw-page-title-main">Albatros C.X</span> Type of aircraft

The Albatros C.X was a German military reconnaissance aircraft that saw service during World War I.

<span class="mw-page-title-main">Halberstadt CL.IV</span> Type of aircraft

The Halberstadt CL.IV was a German ground attack aircraft of World War I.

<span class="mw-page-title-main">Gotha G.II</span> Type of aircraft

The Gotha G.II series was a heavy bomber used by the Luftstreitkräfte during World War I.

<span class="mw-page-title-main">Rumpler C.IV</span> Type of aircraft

The Rumpler C.IV was a German single-engine, two-seat reconnaissance biplane. It was a development of C.III with different tail surfaces and using a Mercedes D.IVa engine in place of the C.III's Benz Bz.IV. The Rumpler 6B 2 was a single-seat floatplane fighter variant with a 120 kW (160 hp) Mercedes D.III engine built for the Kaiserliche Marine.

<span class="mw-page-title-main">LVG C.II</span> Type of aircraft

The LVG C.II was a 1910s German two-seat reconnaissance biplane designed at the Luft-Verkehrs-Gesellschaft for the Luftstreitkräfte.

<span class="mw-page-title-main">Rumpler D.I</span> Type of aircraft

The Rumpler D.I was a fighter-reconnaissance aircraft produced in Germany at the end of World War I. It was a conventional single-bay biplane with wings of unequal span braced by I-struts. It featured an open cockpit and a fixed, tailskid undercarriage. The upper wing was fitted with aerodynamically balanced ailerons and fuselage had an oval cross-section.

<span class="mw-page-title-main">Albatros C.IV</span> Type of aircraft

The Albatros C.IV,. was a German military reconnaissance aircraft built in the autumn of 1915 by Albatros Flugzeugwerke. It was a single-engined biplane, and was based on the Albatros C.III, with which it shared many parts. It was eventually abandoned, in favour of the C.V.

<span class="mw-page-title-main">LFG Roland D.XV</span> 1910s German fighter aircraft

The LFG Roland D.XV was a World War I German single seat fighter aircraft, ordered as a test-bed for engine comparisons. It was distinguished from earlier Roland biplane designs by the elimination of flying wires. Two later aircraft, also called LFG Roland D.XV, were completely different designs with slab sided fuselages.

<span class="mw-page-title-main">Albatros C.XIII</span> Type of aircraft

The Albatros C.XIII was a German two-seat, single-engine, biplane light fighter aircraft built in 1917. Only one was constructed.

<span class="mw-page-title-main">Albatros C.XIV</span> Type of aircraft

The Albatros C.XIV was a German two seat, single engine, biplane fighter aircraft built in 1918. Only one was constructed.

References

Citations

  1. 1 2 3 4 Grey and Thetford 1962, p. 27.
  2. 1 2 3 4 5 Grey and Thetford 1962, p. 29.
  3. 1 2 3 Grey and Thetford 1962, p. 28.
  4. Grey and Thetford 1962, pp. 28-29.
  5. Grey and Thetford 1962, p. 31.
  6. Grey and Thetford 1962, pp. 28-30.

Bibliography