Allyl chloride

Last updated
Allyl chloride
Allyl chloride.svg
Allyl-chloride-3D-balls.png
Allyl-chloride-3D-vdW.png
Names
Preferred IUPAC name
3-Chloroprop-1-ene
Other names
3-Chloropropene
1-Chloro-2-propene [1]
3-Chloropropylene [1]
Identifiers
3D model (JSmol)
ChEBI
ChEMBL
ChemSpider
ECHA InfoCard 100.003.144 OOjs UI icon edit-ltr-progressive.svg
EC Number
  • 209-675-8
KEGG
PubChem CID
RTECS number
  • UC7350000
UNII
UN number 1100
  • InChI=1S/C3H5Cl/c1-2-3-4/h2H,1,3H2 Yes check.svgY
    Key: OSDWBNJEKMUWAV-UHFFFAOYSA-N Yes check.svgY
  • InChI=1/C3H5Cl/c1-2-3-4/h2H,1,3H2
    Key: OSDWBNJEKMUWAV-UHFFFAOYAQ
  • C=CCCl
Properties
C3H5Cl
Molar mass 76.52 g·mol−1
AppearanceColorless, brown, yellow, or purple liquid [1]
Odor pungent, unpleasant [1]
Density 0.94 g/mL
Melting point −135 °C (−211 °F; 138 K)
Boiling point 45 °C (113 °F; 318 K)
0.36 g/100 ml (20 °C)
Solubility soluble in ether, acetone, benzene, chloroform
Vapor pressure 295 mmHg [1]
1.4055
Viscosity 0.3130 mPa·s [2]
Hazards
GHS labelling:
GHS-pictogram-flamme.svg GHS-pictogram-exclam.svg GHS-pictogram-silhouette.svg GHS-pictogram-pollu.svg
Danger
H225, H302, H312, H315, H319, H332, H335, H341, H351, H373, H400
P201, P202, P210, P233, P240, P241, P242, P243, P260, P261, P264, P270, P271, P273, P280, P281, P301+P312, P302+P352, P303+P361+P353, P304+P312, P304+P340, P305+P351+P338, P308+P313, P312, P314, P321, P322, P330, P332+P313, P337+P313, P362, P363, P370+P378, P391, P403+P233, P403+P235, P405, P501
NFPA 704 (fire diamond)
NFPA 704.svgHealth 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasFlammability 3: Liquids and solids that can be ignited under almost all ambient temperature conditions. Flash point between 23 and 38 °C (73 and 100 °F). E.g. gasolineInstability 1: Normally stable, but can become unstable at elevated temperatures and pressures. E.g. calciumSpecial hazards (white): no code
3
3
1
Flash point −32 °C (−26 °F; 241 K)
390 °C (734 °F; 663 K)
Explosive limits 2.9–11.2%
Lethal dose or concentration (LD, LC):
11000 mg/m3 (rat, 2 hr)
11500 mg/m3 (mouse, 2 hr)
5800 mg/m3 (guinea pig, 2 hr)
22500 mg/m3 (rabbit, 2 hr)
10500 mg/m3 (cat, 2 hr) [3]
NIOSH (US health exposure limits):
PEL (Permissible)
TWA 1 ppm (3 mg/m3) [1]
REL (Recommended)
TWA 1 ppm (3 mg/m3)
ST 2 ppm (6 mg/m3) [1]
IDLH (Immediate danger)
250 ppm [1]
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
X mark.svgN  verify  (what is  Yes check.svgYX mark.svgN ?)

Allyl chloride is the organic compound with the formula C H 2=CHCH2 Cl. This colorless liquid is insoluble in water but soluble in common organic solvents. It is mainly converted to epichlorohydrin, used in the production of plastics. It is a chlorinated derivative of propylene. It is an alkylating agent, which makes it both useful and hazardous to handle. [4]

Contents

Production

Laboratory scale

Allyl chloride was first produced in 1857 by Auguste Cahours and August Hofmann by reacting allyl alcohol with phosphorus trichloride. [5] [4] Modern preparation protocols economize this approach, replacing relatively expensive phosphorus trichloride with hydrochloric acid and a catalyst such as copper(I) chloride. [6]

Industrial scale

Allyl chloride is produced by the chlorination of propylene. At lower temperatures, the main product is 1,2-dichloropropane, but at 500 °C, allyl chloride predominates, being formed via a free radical reaction:

CH3CH=CH2 + Cl2 → ClCH2CH=CH2 + HCl

An estimated 800,000 tonnes were produced this way in 1997. [4]

Reactions and uses

The great majority of allyl chloride is converted to epichlorohydrin. [4] Other commercially significant derivatives include allyl alcohol, allylamine, allyl isothiocyanate (synthetic mustard oil), [7] and 1-bromo-3-chloropropane.

As an alkylating agent, it is useful in the manufacture of pharmaceuticals and pesticides, such as mustard oil.

Illustrative reactions

Illustrative of its reactivity is its cyanation to allyl cyanide (CH2=CHCH2CN). [8] Being a reactive alkyl halide, it undergoes reductive coupling to give diallyl: [9]

2 ClCH2CH=CH2 + Mg → (CH2)2(CH=CH2)2 + MgCl2

It undergoes oxidative addition to palladium(0) to give allylpalladium chloride dimer, (C3H5)2Pd2Cl2. Dehydrohalogenation gives cyclopropene.

Safety

Allyl chloride is highly toxic and flammable. Eye effects may be delayed and may lead to possible impairment of vision. [10]

See also

Related Research Articles

Chloromethane, also called methyl chloride, Refrigerant-40, R-40 or HCC 40, is an organic compound with the chemical formula CH3Cl. One of the haloalkanes, it is a colorless, sweet-smelling, flammable gas. Methyl chloride is a crucial reagent in industrial chemistry, although it is rarely present in consumer products, and was formerly utilized as a refrigerant.

<span class="mw-page-title-main">Allyl group</span> Chemical group (–CH₂–CH=CH₂)

In organic chemistry, an allyl group is a substituent with the structural formula −CH2−HC=CH2. It consists of a methylene bridge attached to a vinyl group. The name is derived from the scientific name for garlic, Allium sativum. In 1844, Theodor Wertheim isolated an allyl derivative from garlic oil and named it "Schwefelallyl". The term allyl applies to many compounds related to H2C=CH−CH2, some of which are of practical or of everyday importance, for example, allyl chloride.

<span class="mw-page-title-main">Hydrogen bromide</span> Chemical compound

Hydrogen bromide is the inorganic compound with the formula HBr. It is a hydrogen halide consisting of hydrogen and bromine. A colorless gas, it dissolves in water, forming hydrobromic acid, which is saturated at 68.85% HBr by weight at room temperature. Aqueous solutions that are 47.6% HBr by mass form a constant-boiling azeotrope mixture that boils at 124.3 °C. Boiling less concentrated solutions releases H2O until the constant-boiling mixture composition is reached.

Organochlorine chemistry is concerned with the properties of organochlorine compounds, or organochlorides, organic compounds containing at least one covalently bonded atom of chlorine. The chloroalkane class includes common examples. The wide structural variety and divergent chemical properties of organochlorides lead to a broad range of names, applications, and properties. Organochlorine compounds have wide use in many applications, though some are of profound environmental concern, with TCDD being one of the most notorious.

<span class="mw-page-title-main">Phosphorus trichloride</span> Chemical compound

Phosphorus trichloride is an inorganic compound with the chemical formula PCl3. A colorless liquid when pure, it is an important industrial chemical, being used for the manufacture of phosphites and other organophosphorus compounds. It is toxic and reacts readily with water to release hydrogen chloride.

In organic chemistry a halohydrin is a functional group in which a halogen and a hydroxyl are bonded to adjacent carbon atoms, which otherwise bear only hydrogen or hydrocarbyl groups. The term only applies to saturated motifs, as such compounds like 2-chlorophenol would not normally be considered halohydrins. Megatons of some chlorohydrins, e.g. propylene chlorohydrin, are produced annually as precursors to polymers.

The chemical compound 1,2-dichloroethane, commonly known as ethylene dichloride (EDC), is a chlorinated hydrocarbon. It is a colourless liquid with a chloroform-like odour. The most common use of 1,2-dichloroethane is in the production of vinyl chloride, which is used to make polyvinyl chloride (PVC) pipes, furniture and automobile upholstery, wall coverings, housewares, and automobile parts. 1,2-Dichloroethane is also used generally as an intermediate for other organic chemical compounds, and as a solvent. It forms azeotropes with many other solvents, including water and other chlorocarbons.

<span class="mw-page-title-main">Acryloyl chloride</span> Chemical compound

Acryloyl chloride, also known as 2-propenoyl chloride or acrylic acid chloride, is the organic compound with the formula CH2=CHCO(Cl). It is a colorless liquid, although aged samples appear yellow. It belongs to the acid chlorides group of compounds.

<span class="mw-page-title-main">Allyl alcohol</span> Organic compound (CH2=CHCH2OH)

Allyl alcohol is an organic compound with the structural formula CH2=CHCH2OH. Like many alcohols, it is a water-soluble, colourless liquid. It is more toxic than typical small alcohols. Allyl alcohol is used as a raw material for the production of glycerol, but is also used as a precursor to many specialized compounds such as flame-resistant materials, drying oils, and plasticizers. Allyl alcohol is the smallest representative of the allylic alcohols.

<span class="mw-page-title-main">Adiponitrile</span> Chemical compound

Adiponitrile is an organic compound with the chemical formula (CH2)4(CN)2. This viscous, colourless dinitrile is an important precursor to the polymer nylon 66. In 2005, about one million tonnes of adiponitrile were produced.

Benzyl chloride, or α-chlorotoluene, is an organic compound with the formula C6H5CH2Cl. This colorless liquid is a reactive organochlorine compound that is a widely used chemical building block.

1,1-Dichloroethene, commonly called 1,1-dichloroethylene or vinylidene chloride or 1,1-DCE, is an organochloride with the molecular formula C2H2Cl2. It is a colorless liquid with a sharp odor. Like most chlorocarbons, it is poorly soluble in water, but soluble in organic solvents. 1,1-DCE was the precursor to the original clingwrap, Saran, for food, but this application has been phased out.

<span class="mw-page-title-main">Arsenic trichloride</span> Chemical compound

Arsenic trichloride is an inorganic compound with the formula AsCl3, also known as arsenous chloride or butter of arsenic. This poisonous oil is colourless, although impure samples may appear yellow. It is an intermediate in the manufacture of organoarsenic compounds.

<span class="mw-page-title-main">Epichlorohydrin</span> Chemical compound

Epichlorohydrin is an organochlorine compound and an epoxide. Despite its name, it is not a halohydrin. It is a colorless liquid with a pungent, garlic-like odor, moderately soluble in water, but miscible with most polar organic solvents. It is a chiral molecule generally existing as a racemic mixture of right-handed and left-handed enantiomers. Epichlorohydrin is a highly reactive electrophilic compound and is used in the production of glycerol, plastics, epoxy glues and resins, epoxy diluents and elastomers.

<span class="mw-page-title-main">Propargyl alcohol</span> Chemical compound

Propargyl alcohol, or 2-propyn-1-ol, is an organic compound with the formula C3H4O. It is the simplest stable alcohol containing an alkyne functional group. Propargyl alcohol is a colorless viscous liquid that is miscible with water and most polar organic solvents.

<span class="mw-page-title-main">Allyl bromide</span> Chemical compound

Allyl bromide (3-bromopropene) is an organic halide. It is an alkylating agent used in synthesis of polymers, pharmaceuticals, synthetic perfumes and other organic compounds. Physically, allyl bromide is a colorless liquid with an irritating and persistent smell, however, commercial samples are yellow or brown. Allyl bromide is more reactive but more expensive than allyl chloride, and these considerations guide its use.

<span class="mw-page-title-main">Chloroacetaldehyde</span> Chemical compound

Chloroacetaldehyde is an organic compound with the formula ClCH2CHO. Like some related compounds, it is highly electrophilic reagent and a potentially dangerous alkylating agent. The compound is not normally encountered in the anhydrous form, but rather as the hemiacetal (ClCH2CH(OH))2O.

<span class="mw-page-title-main">Allyl acetate</span> Chemical compound

Allyl acetate is an organic compound with formula C3H5OC(O)CH3. This colourless liquid is a precursor to especially allyl alcohol, which is a useful industrial intermediate. It is the acetate ester of allyl alcohol.

<span class="mw-page-title-main">1,2-Dichloropropane</span> Chemical compound

1,2-Dichloropropane is an organic compound classified as a chlorocarbon. It is a colorless, flammable liquid with a sweet odor. it is obtained as a byproduct of the production of epichlorohydrin, which is produced on a large scale.

<span class="mw-page-title-main">Perchloromethyl mercaptan</span> Chemical compound

Perchloromethyl mercaptan is the organosulfur compound with the formula CCl3SCl. It is mainly used as an intermediate for the synthesis of dyes and fungicides (captan, folpet). It is a colorless oil, although commercial samples are yellowish. It is insoluble in water but soluble in organic solvents. It has a foul, unbearable, acrid odor. Perchloromethyl mercaptan is the original name. The systematic name is trichloromethanesulfenyl chloride, because the compound is a sulfenyl chloride, not a mercaptan.

References

  1. 1 2 3 4 5 6 7 8 NIOSH Pocket Guide to Chemical Hazards. "#0018". National Institute for Occupational Safety and Health (NIOSH).
  2. ↑ Viswanath, D.S.; Natarajan, G. (1989). Data Book on the Viscosity of Liquids. Hemisphere Publishing Corporation. ISBN   0-89116-778-1.
  3. ↑ "Allyl chloride". Immediately Dangerous to Life or Health Concentrations (IDLH). National Institute for Occupational Safety and Health (NIOSH).
  4. 1 2 3 4 Ludger Krähling, Jürgen Krey, Gerald Jakobson, Johann Grolig, Leopold Miksche “Allyl Compounds” in Ullmann's Encyclopedia of Industrial Chemistry Wiley-VCH, Weinheim, 2005. Published online: 15 June 2000.
  5. ↑ Hofmann. Augustus William and Cahours. Augustus (1857) "Researches on a new class of alcohols," Philosophical Transactions of the Royal Society of London, 147: 555–574 ; see pp. 558–559.
  6. ↑ Furniss, Brian; Hannaford, Antony; Smith, Peter; Tatchell, Austin (1996). Vogel's Textbook of Practical Organic Chemistry (5th ed.). London: Longman Science & Technical. pp.  558. ISBN   9780582462366.
  7. ↑ F. Romanowski, H. Klenk "Thiocyanates and Isothiocyanates, Organic" in Ullmann's Encyclopedia of Industrial Chemistry, 2005, Wiley-VCH: Weinheim. doi : 10.1002/14356007.a26_749
  8. ↑ J. V. Supniewski & P. L. Salzberg (1941). "Allyl Cyanide". Organic Syntheses .; Collective Volume, vol. 1, p. 46
  9. ↑ Amos Turk; Henry Chanan (1947). "Biallyl". Org. Synth. 27: 7. doi:10.15227/orgsyn.027.0007.
  10. ↑ International Programme on Chemical Safety & the Commission of the European Communities. "Allyl Chloride". International Chemical Safety Cards. © IPCS CEC 1993. Archived from the original on 2016-03-04. Retrieved 13 February 2012.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.