Arthur O. Austin

Last updated

Arthur O. Austin
Arthur O. Austin 1933.jpg
Austin in 1933
Born(1879-12-28)December 28, 1879
Stockton, California, U.S.
DiedJune 7, 1964(1964-06-07) (aged 84)
Barberton, Ohio, U.S.
Alma mater Leland Stanford University
OccupationEngineer
Known for Austin transformer
Engineering career
DisciplineElectrical

Arthur Oswin Austin (December 28, 1879 – June 7, 1964) was an American electrical engineer and inventor. He is best known as the inventor of the Austin transformer, a double-ring toroidal transformer used to supply power for lighting circuits on radio towers. Austin's research included improvements to radio transmission equipment and the effects of lightning on high-voltage transmission lines and aircraft. He was a fellow of the American Institute of Electrical Engineers and of the Institute of Radio Engineers, and was known as an expert in high-voltage insulators and fittings. His work on transmitting antennas included both military and civilian projects.

Contents

A native of California, Austin graduated from Leland Stanford University with a degree in electrical engineering. He lived for a few years in New York where he worked for General Electric and the Lima Insulator Company, but spent most of his adult life in Ohio where he married, worked for the Ohio Brass Company and founded the Austin Insulator Company. He bought a large estate in Barberton, Ohio, lived in the mansion, and built an extensive outdoor electrical laboratory on the grounds.

Career

Austin (center foreground) in a lab in 1905. Probably either General Electric or Pacific Gas and Electric. Arthur O. Austin 1905.jpg
Austin (center foreground) in a lab in 1905. Probably either General Electric or Pacific Gas and Electric.

After graduating from college in 1903, Austin worked for General Electric in Schenectady, New York. He left General Electric in 1904 and worked for Stanley Electric Company in Pittsfield, Massachusetts for a short time. [1] He was hired by Pacific Gas and Electric, initially acting as their eastern representative doing insulator testing, and then moving to the San Francisco office in 1905. [2] [1] In 1906, he moved to Lima, New York, to work for the Lima Insulator Company, serving as manager and chief engineer. The company's factory was destroyed by fire in 1908, after which Austin moved to Ohio to work for Akron Hi-Potential Porcelain Company. [3] Akron Porcelain became a subsidiary of the Ohio Brass Company [2] which in turn was purchased by Hubbell in 1978. [4]

During the First World War, the US Navy planned work on a military radio facility in Monroe, North Carolina, using arc converter transmitters produced by the Federal Telegraph Company, generating approximately 1 MW of power. Ohio Brass was contracted to supply the antenna insulators, with Austin assigned to the project. [2] The war ended before Federal could deliver the arc converters and the station was never built. [5]

Austin invented an electrically heated, oil filled porcelain insulator used to support radio transmission towers. Previous porcelain insulator designs had sufficient mechanical strength and electrical insulation for their intended purpose, but could be fragile enough that a tower might be brought down by a vandal with a .22 caliber rifle. Austin's design used a porcelain tube in combination with a bakelite sleeve, the later having sufficient strength to support the tower if the porcelain was damaged. The porcelain was kept under compression, increasing its strength. The assembly was filled with oil kept warm by a 120-watt electric heater; a thermostat kept the exterior of the insulator above the dew point, preventing moisture from condensing on its surface which would result in leakage of radio frequency (RF) energy. [6] The resistance to condensation in damp weather led Spokane Washington's radio station KHQ to use this type of insulator [6] in their 826-foot (252 m) 5,000 watt transmission tower [7] which the Spokesman-Review described in 1945 as "the tallest self-supporting tower in the world". [8]

A 1928 patent described an insulated perch which prevented birds from resting on electrical transmission line insulator strings. [9] [10] Austin was a fellow of both the American Institute of Electrical Engineers and the Institute of Radio Engineers. [11] He was a member of several other professional societies including the American Ceramic Society, the American Society for Testing Materials, the American Electric Chemical Society, the Sigma Xi scientific fraternity [1] and the National Academy of Science. [12]

WHK transmitter antenna

U.S. Patent 1,968,868 for an insulated radio tower. US Patent 1968868 (A. O. Austin, Radiotower).pdf
U.S. Patent 1,968,868 for an insulated radio tower.

In the late 1920s, AM radio station WHK in Cleveland, Ohio was investigating ways to improve their signal coverage. Chief engineer E. L. Grove believed that the station's poor signal coverage was due to the effect of other steel-frame buildings in the vicinity of their transmitter site atop a downtown office building, poor grounding, and power loss from the antenna's support towers. After obtaining permission from the Federal Radio Commission, a new transmitter was built on a hill nine miles south of the city, leaving the studio downtown. Grove consulted with the Ohio Brass Company, where Austin was the chief engineer. A plan was devised to build a transmitting tower in several sections, with each section isolated from the others by insulators, eliminating the parasitic electrical currents induced in the steel structure by the antenna's radiating element. [13] Austin had previously worked on sectionalized high-tension power line towers and held a patent on that design. [14]

Some radio stations had already built towers which were insulated from the ground, but WHK's design was the first to use insulators in the tower itself, dividing it into multiple isolated sections. In addition to the structural insulators, the tower included special ladders with "jack knife" sections at the insulated joints; during transmitter operation, the ladder sections were kept open to preserve the electrical isolation, but could be closed to allow workers to climb the tower for maintenance. During initial testing, the 1,000 watt WHK signal could be heard in New Zealand whereas the previous transmitter, with the same power level, was not even audible throughout all of Cleveland. [13] Austin was granted U.S patent 1,968,868 for this tower design. [15]

Tower lighting was provided by gas carried through copper pipes which transitioned to non-conductive porcelain tubes at the tower joints. [13] A 1932 article in Radio Engineering magazine described the use of gas lighting in towers consisting of multiple electrically isolated segments as in the WHK design, stating that electrical lighting would be impractical due to the need for isolation transformers at every insulating joint. The author speculated that external floodlighting, neon tubes driven from the radiated RF energy, or wind generators might all be practical alternatives to the use of gas. [16]

Austin transformer

Example of an Austin transformer at the base of a radio tower. Austin Ring WMCA WNYC cropped and annotated.jpg
Example of an Austin transformer at the base of a radio tower.

Austin is best known for inventing the Austin ring transformer, [2] a type of toroidal transformer with an air gap providing radio frequency isolation between the primary and secondary windings while passing 50/60 Hz power. [17] These are used at the bases of radio transmission towers to allow electrical power to be fed to the tower lights without interfering with the radio-frequency feed. [18] : 143–144  The primary winding is mounted on the ground or on the tower's foundation, with the secondary on the energized tower structure. [19] The windings are usually at right angles to each other [20] and oriented so rain water can drip off the secondary without hitting the primary ring. [19] If an optional [21] lightning protection spark gap is installed, it is oriented with the arc path horizontal, so as to make the arc self-extinguishing. [19]

Austin ring transformers are well suited for use on towers which are approximately one half wavelength tall. This type of tower will have a large base impedance leading to high voltages across the base insulators which make choke-type power feeds impractical. The large air gap between the primary and secondary windings results in a low coupling capacitance and high breakdown voltage. [22]

The 1971 Austin Insulator product catalog listed 21 standard types with power ratings from 0.7 to 7.0 kVA weighing 70–340 pounds (32–154 kg), with the larger units only available on special order. [21] Despite Austin having been issued a large number of patents, there are no known patents on this particular invention. Patrick Warr of Austin Insulators [23] was quoted by Radio World: [2]

I'm not aware that there was ever any patent. There was a story related to me by my predecessors when I first came to work here. It seems that Arthur Austin was happily making ring transformers when he was approached by Hughey and Phillips, a company based somewhere around Los Angeles that was into several types of lighting. Austin told them he wasn't interested in the West Coast market, as he had enough to do in Ohio, and told them how to make the transformer, and to 'go ahead and make it.'

Personal life

Austin in undated photo, 1928 or earlier. Arthur O. Austin 1928 Akron Beacon Journal.png
Austin in undated photo, 1928 or earlier.

Arthur Oswin Austin (who preferred to be called A. O. Austin) was born on December 28, 1879 in Stockton, California to Oswin Alonzo and Mary Louisa Austin. [3] He attended high school in Stockton [1] then went to Leland Stanford University, graduating in 1903 with an Bachelors of Arts degree in electrical engineering. [1] [24]

Austin married Eleanor Briggs on December 28, 1907, in New York City. [3] In 1919, Eleanor was killed (and Arthur injured) in an automobile accident on Massachusetts's Mohawk Trail. [25] Two years later, Austin married Eleanor's sister Augusta in Los Gatos, California; the couple had two daughters, Barbara and Martha. [3] Austin had a brother, Edward, who worked on building Ohio Brass's manufacturing facility in Niagara Falls, Ontario. [26]

O. C. Barber mansion Residence of O. C. Barber, Anna Dean Farm (12840459315).jpg
O. C. Barber mansion

By the 1920s, Austin was a wealthy man. [2] In 1926, he purchased 275 acres from the estate of O. C. Barber in Barberton, Ohio, for an undisclosed price. The parcel included the Barber mansion, the gate house, and several barns and other buildings. [27] Construction was of red brick, white concrete block, royal blue trim, and red terra cotta tile roofs. [28] The house, which had gold-leaf ceilings, [29] was described in 2005 by the Akron Beacon Journal as having 52 rooms, "a breathtaking vista from its east-side perch", and being "the most opulent residence between New York City and Chicago". [30] The house was surrounded by 35 ancillary buildings including barns. [30]

Austin died at the age of 84 on June 7, 1964, in Barberton after a two-month illness. The Akron Beacon Journal described him in an obituary as "one of the foremost electrical experts of the century". [12] After his death, his heirs were unable to maintain the estate. There was an effort on the part of the Barberton community to preserve the property for its historic value, but funding could not be secured and the house was torn down. It was estimated at the time that upkeep of the mansion cost $3,000 (equivalent to $29,000in 2023) per month. [30]

In addition to his professional activities, Austin was involved in a number of civic duties. He was a director of the Barberton Citizens Hospital, a charter member of the local chamber of commerce (serving as president in 1928) and the Barberton Rotary Club (serving as president in 1941–1942). He was a Republican, a Mason and a member of the Order of the Eastern Star, and a member of the First United Presbyterian Church of Barberton. His hobbies included photography and gardening. [3] As of 2024 the Barberton Community Foundation manages the A.O. Austin Engineering Scholarship Fund, awarded to Barberton students seeking post-secondary engineering degrees. [31]

High-voltage laboratories

Ohio Insulator Company high voltage lab number 1, Park & 9th Streets in Barberton, Ohio. Ohio Insulator Company high voltage lab.jpg
Ohio Insulator Company high voltage lab number 1, Park & 9th Streets in Barberton, Ohio.

Between 1910 and 1968 the Ohio Insulator Company (which later changed its name to Ohio Brass) built a series of four high-voltage testing labs, with Austin being involved in the first two. The need for such a lab had been driven by the increase in voltages used for electrical transmission. Lines running at 25 kV were typical in 1891 but by the early 1920s lines were commonly running at 220 kV and it was not yet fully understood how these lines would be affected by storms, rain, fog, or snow. The high voltages necessitated physically large equipment and clearances, which meant the labs could no longer fit inside buildings and had to be built outdoors. [11]

The first lab was built in 1910. [11] In 1926, Austin built another outdoor electrical testing laboratory on the grounds of the Barber estate. In operation until 1933, this was the second of the four high-voltage labs established by Ohio Brass. It has been described as, "a juxtaposition of Victorian elegance and high-tech equipment". [11] Equipment included four iron-core, 60 Hz transformers manufactured by Allis-Chalmers, rated at 2.2 kV input, 600 kV output. By over-exciting the transformers, Austin was able to increase the output rating to 750 kV and produced up to 900 kV in tests. R. P. Cronin of the Sandusky Register wrote that these were connected in series and were "three of the largest transformers in the world". [32] A capacitor and synchronous switch was used to produce a transient overvoltage and a spark across a sphere gap which could be applied to objects being studied. [11] A 1933 newspaper report wrote about the lab: [33]

The courtyard of the laboratory, where most of the experiments have been conducted, is a weird place, filled with cage-like structural towers, and dominated by three mammoth transformers. From an insulated ball suspended in the air, at Austin's will 30-foot flashes of lightning leap to the ground with a crack like a rifle shot.

The space available on the Barber estate was outgrown by 1933 and in 1934 the third lab was built by Ohio Brass adjacent to their factory. [11] In 1968 the fourth lab, which includes a 5000 kV impulse generator, was built in Wadsworth, Ohio. As of 2024 it operates as Hubbell's Frank B. Black Research Center, named in honor of Ohio Brass's founder. [34] [35]

Effects of lightning on aircraft

Austin used his lab to experiment with the effects of lightning on aircraft, both airplanes and lighter-than-air airships from the Goodyear Zeppelin Corporation [33] with his research leading to methods of protecting aircraft from these strikes. [11] Austin's interest in this area stemmed from a 1929 Transcontinental Air Transport crash. [32] In 1930 Popular Mechanics described the lab as "the most powerful outdoor high-voltage laboratory in the world". [36] The article observed that aircraft lightning strikes had not previously been a major problem because there were few planes and most would stay on the ground during thunderstorms but the increasing popularity of air travel would make lightning a greater hazard. [36]

Preliminary experiments at the Barber estate lab were done on scale models of airplanes. The models were hit by artificial lightning strikes measuring millions of volts and hundreds of thousands of amps. These experiments showed that lightning would typically enter and leave the plane at projecting points on the structure; the two points might be the opposite wingtips, the propeller and the tail skid, or other pairs. In one experiment, the pitot tube was struck. The hot engine exhaust gas did not appear to attract strikes, contrary to speculation that it would. [36]

Later tests used a full-sized Barling NB-3, a monoplane with a fabric-covered all-metal frame which had been provided to Austin by Popular Mechanics for testing. The plane was subjected to repeated lightning strikes while on the ground. Additional tests on the plane's LeBlond 60 engine showed that it would continue to run at idle speed after being struck. Lightning strikes on the tip of the rudder resulted in small holes burned through the fabric covering where it contacted the duralumin frame. [36] Austin's experiments showed bare sheet metal was undamaged by lightning strikes, and only minor damage was caused when the metal was covered by fabric. [37] As of 1930 when these findings were published by Popular Mechanics, additional experiments were planned to investigate the effect of lightning on fuel tanks, the engine crankcase, flight instruments, and control cables. [36]

Austin Insulator Company

In 1933, Austin started the A. O. Austin Insulator Company. After Austin's death in 1964, the company passed through a number of ownership changes, being at various times part of Decca Navigator Company (a division of Decca Records). Racal-Decca, and Litton Marine. [38] The purchase by Decca in 1971 was accompanied by a move to the Decca Radar plant in Toronto, Canada. [21] Decca had previously been a customer and relied on the specialized insulators which Austin provided; to ensure the continued availability of these components, Decca bought the company. [2]

After further changes of ownership, the Austin company was bought by Patrick Warr, who had been a Decca employee in the 1960s. [2] As of 2024, Warr is running it as an independent company known as Austin Insulators Inc. [38] The company's main products are high-voltage insulators and transformers mostly used by the radio transmission industry. [39] Insulator strings of the "safety core" type with mechanical ratings up to 1,000,000 pounds (450,000 kg) are available. [18] : 34 

Related Research Articles

<span class="mw-page-title-main">Insulator (electricity)</span> Material that does not conduct an electric current

An electrical insulator is a material in which electric current does not flow freely. The atoms of the insulator have tightly bound electrons which cannot readily move. Other materials—semiconductors and conductors—conduct electric current more easily. The property that distinguishes an insulator is its resistivity; insulators have higher resistivity than semiconductors or conductors. The most common examples are non-metals.

<span class="mw-page-title-main">Ground (electricity)</span> Reference point in an electrical circuit from which voltages are measured

In electrical engineering, ground or earth may be a reference point in an electrical circuit from which voltages are measured, a common return path for electric current, or a direct physical connection to the Earth.

<span class="mw-page-title-main">Electrical substation</span> Part of an electrical transmission, and distribution system

A substation is a part of an electrical generation, transmission, and distribution system. Substations transform voltage from high to low, or the reverse, or perform any of several other important functions. Between the generating station and consumer, electric power may flow through several substations at different voltage levels. A substation may include transformers to change voltage levels between high transmission voltages and lower distribution voltages, or at the interconnection of two different transmission voltages. They are a common component of the infrastructure. There are 55,000 substations in the United States.

<span class="mw-page-title-main">Lightning arrester</span> Device used on power lines to protect against sudden surges from lightning

A lightning arrester is a device, essentially an air gap between an electric wire and ground, used on electric power transmission and telecommunication systems to protect the insulation and conductors of the system from the damaging effects of lightning. The typical lightning arrester has a high-voltage terminal and a ground terminal. When a lightning surge travels along the power line to the arrester, the current from the surge is diverted through the arrester, in most cases to earth.

<span class="mw-page-title-main">Transmission tower</span> Structure used to support an overhead power line

A transmission tower is a tall structure, usually a lattice tower made of steel that is used to support an overhead power line. In electrical grids, transmission towers carry high-voltage transmission lines that transport bulk electric power from generating stations to electrical substations, from which electricity is delivered to end consumers; moreover, utility poles are used to support lower-voltage sub-transmission and distribution lines that transport electricity from substations to electricity customers.

<span class="mw-page-title-main">Electrical breakdown</span> Conduction of electricity through an insulator under sufficiently high voltage

In electronics, electrical breakdown or dielectric breakdown is a process that occurs when an electrically insulating material, subjected to a high enough voltage, suddenly becomes a conductor and current flows through it. All insulating materials undergo breakdown when the electric field caused by an applied voltage exceeds the material's dielectric strength. The voltage at which a given insulating object becomes conductive is called its breakdown voltage and, in addition to its dielectric strength, depends on its size and shape, and the location on the object at which the voltage is applied. Under sufficient voltage, electrical breakdown can occur within solids, liquids, or gases. However, the specific breakdown mechanisms are different for each kind of dielectric medium.

<span class="mw-page-title-main">Guy-wire</span> Tensioned cable designed to add stability to a freestanding structure

A guy-wire, guy-line, guy-rope, down guy, or stay, also called simply a guy, is a tensioned cable designed to add stability to a freestanding structure. They are used commonly for ship masts, radio masts, wind turbines, utility poles, and tents. A thin vertical mast supported by guy wires is called a guyed mast. Structures that support antennas are frequently of a lattice construction and are called "towers". One end of the guy is attached to the structure, and the other is anchored to the ground at some distance from the mast or tower base. The tension in the diagonal guy-wire, combined with the compression and buckling strength of the structure, allows the structure to withstand lateral loads such as wind or the weight of cantilevered structures. They are installed radially, usually at equal angles about the structure, in trios and quads. As the tower leans a bit due to the wind force, the increased guy tension is resolved into a compression force in the tower or mast and a lateral force that resists the wind load. For example, antenna masts are often held up by three guy-wires at 120° angles. Structures with predictable lateral loads, such as electrical utility poles, may require only a single guy-wire to offset the lateral pull of the electrical wires, at a spot where the wires change direction.

<span class="mw-page-title-main">HVDC converter station</span> Type of substation

An HVDC converter station is a specialised type of substation which forms the terminal equipment for a high-voltage direct current (HVDC) transmission line. It converts direct current to alternating current or the reverse. In addition to the converter, the station usually contains:

<span class="mw-page-title-main">Utility pole</span> Post used by public utilities to support overhead wires and related equipment

A utility pole is a column or post, usually made out of wood or aluminum alloy, used to support overhead power lines and various other public utilities, such as electrical cable, fiber optic cable, and related equipment such as transformers and street lights. It can be referred to as a transmission pole, telephone pole, telecommunication pole, power pole, hydro pole, telegraph pole, or telegraph post, depending on its application. A Stobie pole is a multi-purpose pole made of two steel joists held apart by a slab of concrete in the middle, generally found in South Australia.

<span class="mw-page-title-main">Overhead power line</span> Above-ground structure for bulk transfer and distribution of electricity

An overhead power line is a structure used in electric power transmission and distribution to transmit electrical energy along large distances. It consists of one or more conductors suspended by towers or poles. Since the surrounding air provides good cooling, insulation along long passages and allows optical inspection, overhead power lines are generally the lowest-cost method of power transmission for large quantities of electric energy.

<span class="mw-page-title-main">Mast radiator</span> Type of radio frequency antenna

A mast radiator is a radio mast or tower in which the metal structure itself is energized and functions as an antenna. This design, first used widely in the 1930s, is commonly used for transmitting antennas operating at low frequencies, in the LF and MF bands, in particular those used for AM radio broadcasting stations. The conductive steel mast is electrically connected to the transmitter. Its base is usually mounted on a nonconductive support to insulate it from the ground. A mast radiator is a form of monopole antenna.

<span class="mw-page-title-main">WHK (AM)</span> Talk radio station in Cleveland, Ohio

WHK is a commercial AM radio station licensed to Cleveland, Ohio, carrying a talk format known as "AM 1420 The Answer". Owned by the Salem Media Group, the station serves both Greater Cleveland and the Northeast Ohio region as an affiliate for the Salem Radio Network. WHK's studios are currently located in the Cleveland suburb of Independence while the transmitter site resides in neighboring Seven Hills.

<span class="mw-page-title-main">WKDD</span> Radio station in Munroe Falls, Ohio, serving Akron

WKDD is a commercial radio station licensed to Munroe Falls, Ohio, United States, featuring a hot adult contemporary format known as "98.1 KDD". Owned by iHeartMedia, Inc., the station serves both the Akron-Canton metro area, with additional coverage in Greater Cleveland and much of surrounding Northeast Ohio. WKDD's studios are located in North Canton, while the transmitter is located in Cuyahoga Falls. In addition to a standard analog transmission, WKDD broadcasts over two HD Radio channels, and streams online via iHeartRadio.

<span class="mw-page-title-main">Arcing horns</span>

Arcing horns are projecting conductors used to protect insulators or switch hardware on high voltage electric power transmission systems from damage during flashover. Overvoltages on transmission lines, due to atmospheric electricity, lightning strikes, or electrical faults, can cause arcs across insulators (flashovers) that can damage them. Alternately, atmospheric conditions or transients that occur during switching can cause an arc to form in the breaking path of a switch during its operation. Arcing horns provide a path for flashover to occur that bypasses the surface of the protected device. Horns are normally paired on either side of an insulator, one connected to the high voltage part and the other to ground, or at the breaking point of a switch contact. They are frequently to be seen on insulator strings on overhead lines, or protecting transformer bushings.

<span class="mw-page-title-main">Strain insulator</span>

A strain insulator is an electrical insulator that is designed to work in mechanical tension (strain), to withstand the pull of a suspended electrical wire or cable. They are used in overhead electrical wiring, to support radio antennas and overhead power lines. A strain insulator may be inserted between two lengths of wire to isolate them electrically from each other while maintaining a mechanical connection, or where a wire attaches to a pole or tower, to transmit the pull of the wire to the support while insulating it electrically. Strain insulators were first used in telegraph systems in the mid 19th century.

China XD Group is a Chinese state-owned power engineering company and manufacturer of electrical equipment. The company was established in July 1959 and was formerly known as Xi'an Electric Machinery Manufacturing Company, it was also known as Xi'an XD, Xi'an Xidian, and Xi'an Electric

<span class="mw-page-title-main">Austin transformer</span> Type of isolating electrical transformer

An Austin ring transformer is a special type of isolation transformer with low capacitance between the primary and secondary windings and high isolation.

<span class="mw-page-title-main">History of the Tesla coil</span> An electric circuit which produces very high voltage alternating current

Nikola Tesla patented the Tesla coil circuit on April 25, 1891. and first publicly demonstrated it May 20, 1891 in his lecture "Experiments with Alternate Currents of Very High Frequency and Their Application to Methods of Artificial Illumination" before the American Institute of Electrical Engineers at Columbia College, New York. Although Tesla patented many similar circuits during this period, this was the first that contained all the elements of the Tesla coil: high voltage primary transformer, capacitor, spark gap, and air core "oscillation transformer".

Louis Dijour Smullin was an American electrical engineer who spend most of his career at the Massachusetts Institute of Technology (MIT). He is best known for his work with Giorgio Fiocco to measure the distance to the Moon using a ruby laser in 1962, shortly after that device was invented. Earlier, he had worked in the microwave radar field at the MIT Radiation Laboratory and was instrumental in creating the Lincoln Laboratory that carried on this work. Later he worked on developing instrumentation for nuclear fusion research and many other projects. He retired in 1986 but worked in the department until 2001.

References

  1. 1 2 3 4 5 "We Congratulate – A. O. Austin". Akron Beacon Journal . December 28, 1928. p. 15.
  2. 1 2 3 4 5 6 7 8 O'Neal, James E. (April 21, 2017). "Arthur O. Austin's Continuing Legacy". Radio World . Archived from the original on November 20, 2022. Retrieved November 20, 2022.
  3. 1 2 3 4 5 Dodge, Edward N., ed. (1967). "Austin, Arthur Oswin". Encyclopedia of American Biography New Series. Vol. XXXVI. The American Historical Company. pp. 464–466.
  4. ↑ "Ohio Brass". Hubbell Power Systems. Archived from the original on November 21, 2022. Retrieved November 21, 2022.
  5. ↑ O'Neal, James E. (April 26, 2020). "When Brute Force Transmitters Ruled the Air". Radio World . Retrieved March 16, 2024.
  6. 1 2 "Heated Insulators Safeguard Radio-Range Beacons". Popular Science . 139 (6): 122–123. December 1941 – via Google Books.
  7. ↑ Kershner, Jim (March 9, 2022). "KHQ Radio (Spokane)". History Link . Retrieved March 23, 2024.
  8. ↑ "Chronicle Seeks Purchase of KHQ". The Spokesman-Review . Spokane, Washington. October 24, 1945. p. 6. Retrieved March 22, 2024.
  9. ↑ "Patents: Insulated Perch for Preventing Bird Trouble in Connection with Electrical Transmission Lines". Ceramic Abstracts . 7 (12): 850. December 1928 – via Google Books.
  10. ↑ US 1685663,"Insulated Perch for Preventing Bird Trouble in Connection with Electrical Transmission Lines.",published September 25, 1928
  11. 1 2 3 4 5 6 7 Colburn, Robert (April 1, 2014). "From Matches to Lightning: The Ohio Brass High-Voltage Laboratories". IEEE-USA InSight. Archived from the original on November 21, 2022. Retrieved November 21, 2022.
  12. 1 2 "Barberton Leader A. O. Austin Dies". Akron Beacon Journal . June 8, 1964. p. 15 – via newspapers.com.
  13. 1 2 3 "Station WHK Introduces Important Refinements into Radio Transmitting" (PDF). Radio Engineering. XI (8): 21–22. August 1931 – via World Radio History.
  14. ↑ O'Neal, James E. (February 24, 2015). "A Most Unusual Transmitter Plant". Radio World . Retrieved March 10, 2024.
  15. ↑ US 1968868,Austin, Arthur O.,"Radiotower",issued August 7, 1934, assigned to The Ohio Brass Company
  16. ↑ Gunsolley, Verne V. (June 1932). "Radio Tower Tuning and Lighting" (PDF). Radio Engineering . XII (6): 7, 8, 12 – via World Radio History.
  17. ↑ "Austin Ring Transformers". Austin Insulators Inc. Retrieved June 6, 2024.
  18. 1 2 Laport, E. A. (1952). Radio Antenna Engineering. McGraw-Hill – via Internet Archive.
  19. 1 2 3 Lockwood, Stephen S.; Cox, Bobby L. "New Tools to Co-Locate Wireless Facilities with AM Antennas" (PDF). Kitronic Labs. p. 2.
  20. ↑ Thomas, Roland E.; Rosa, Albert J.; Toussaint, Gregory J. (2023). The Analysis and Design of Linear Circuits (ebook). John Wiley & Sons. p. 726. ISBN   978-1-119-91344-3.
  21. 1 2 3 "Austin Insulator Division product catalog" (PDF). Decca Radar. July 1971. pp. 3, 33-35 (un-numbered in original).
  22. ↑ Whitfield, Griffith B Jr. (1962). Radio-Electronic Transmission Fundamentals. McGraw-Hill. p. 367 – via Internet Archive.
  23. ↑ "Austin Insulators Inc". Dun & Bradstreet Business Directory. Retrieved March 10, 2024.
  24. ↑ "Bachelors Of Arts". The Daily Palo Alto (Commencement Edition). May 25, 1903. p. 9. Retrieved June 9, 2024.
  25. ↑ "Woman Killed on Mohawk Trail". Hartford Courant . September 20, 1919. p. 10. Retrieved May 31, 2024– via Newspapers.com.
  26. ↑ "Canadian Ohio Brass Co. Marks 50th Year in City". Niagara Falls Review. Niagara Falls, Ontario, Canada. August 12, 1972. p. 3. Retrieved June 15, 2024– via newspapers.com.
  27. ↑ "O. C. Barber Farm of 275 Acres Sold". Akron Beacon Journal . June 14, 1926. p. 15. Retrieved June 6, 2024– via newspaper.com.
  28. ↑ Bissler, Bob (Fall 2001). "UA Alumni are Protecting the Dream of Barberton Founder and Buchtel Collect Supporter O.C. Barber" (PDF). Akron Magazine. University of Akron. pp. 18–21. Retrieved March 16, 2024.
  29. ↑ "Anna Dean Farm Mansion Photograph". Ohio Memory Connection. Retrieved March 15, 2024.
  30. 1 2 3 "Barberton Still Regrets its Loss: O.C. Barber's Mansion Remembered 40 Years After Demise". Akron Beacon Journal . April 29, 2005.
  31. ↑ "A.O. Austin Engineering Scholarship Fund". Barberton Community Foundation. Retrieved March 10, 2024.
  32. 1 2 Cronin, R. P. Jr. (March 14, 1930). "Man-Made Lightning Hits Planes in Experiments to Reduce Hazard". Sandusky Register . p. 3. Retrieved March 25, 2024– via Newspaper Archive.
  33. 1 2 "Seek to Tame Lightning as Menace to Aircraft". Dayton Daily News . May 19, 1933. p. 37 – via newspapers.com.
  34. ↑ "Hubbell Laboratories Capability Guide" (PDF). Hubbell Power Systems . Retrieved March 14, 2024.
  35. ↑ "Visionary" (PDF). Hubbell Incorporated. p. 6. Bulletin EU1194-HR4.
  36. 1 2 3 4 5 Burton, W. E. (March 1930). "The Lightning Hazard in Flying". Popular Mechanics . Vol. 53, no. 3. Hearst Magazines. pp. 359–362. Retrieved March 14, 2024.
  37. ↑ "Taming Lightning as Air Peril". Piqua Daily Call . June 1, 1933. p. 9. Retrieved March 25, 2024– via Newspaper Archive.
  38. 1 2 "History of Austin Insulators". Austin Insulators Inc. Archived from the original on November 20, 2022. Retrieved November 20, 2022.
  39. ↑ "Product Catalogue". Austin Insulators Inc. Archived from the original on November 20, 2022. Retrieved November 20, 2022.

Further reading

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.