Bunk bed

Last updated
Children's bunk bed Bunk bed.jpg
Children's bunk bed
Bunks of French aircraft carrier Clemenceau Banettes mg 5182.jpg
Bunks of French aircraft carrier Clemenceau

A bunk bed or set of bunks [1] is a type of bed in which one bed frame (a bunk) is stacked on top of another bed, allowing two or more sleeping-places to occupy the floor space usually required by just one. Bunks are commonly seen on ships, in the military, and in hostels, dormitories, summer camps, children's bedrooms, and prisons.

Contents

Bunk beds are normally supported by four poles or pillars, one at each corner of the bed. A ladder or a flight of stairs leads to the upper bed, which normally features a railing to prevent the sleeper from falling off. Some models also have a privacy curtain for the lower bunk. Because of the need for a ladder and the height of the upper bed, the U.S. Consumer Product Safety Commission recommends using the top bunk of a bunk bed only for persons aged 6 and over. [2]

A loft bed is an elevated bed similar to a bunk bed, but without the lower beds, freeing floor space for other furniture, such as a desk, which might be built into the loft bed. Low loft-beds are lower to the ground and designed for younger children.

Types

The most common type is the standard bunk bed which has two same size mattresses stacked one directly over the other. A twin over full bunk bed is arranged as a standard except that the bottom mattress is a full size and the upper is a twin size. A full over full bunk bed is otherwise called as the wider bed, which means both top and bottom has the same wider size. They both have a double bed and a total of four people can sleep in it at the same time. A futon bunk is also arranged like a standard bunk, except the lower bunk is a Western-style futon couch, which converts into a bed rather than a standard mattress. Futon bunks can be used to save space in small apartments or rooms, because the lower bed converts to a couch for use during the daytime. In an L-shape bunk the bottom bed is oriented at a right angle to the top bed such that when viewed from above the beds form an L. This also creates a small alcove where a desk or bookshelf can be placed.

A loft bed denotes a bunk bed that has only the top bunk, creating an open space underneath that can be occupied by a chest, drawers, or even a work area. [3] [4] This makes loft beds an efficient use of small spaces by utilizing the entire vertical area that would otherwise be left unused. Some loft beds even have stowable/trundle beds while retaining the capability to contain workstations and drawers. Loft beds can be more expensive than bunk beds due to built-in storage capacity and other features.

Other names are mezzanine bed, (bunk) high sleeper (bed), loft bunk.

Triple loft bed; left, a loft bed with bookshelf below, right, a two-story bunk bed Cottage "johnny Doome" (38527615124).jpg
Triple loft bed; left, a loft bed with bookshelf below, right, a two-story bunk bed

A triple loft bed is an arrangement involving a total of three bunks. These bunks are a combination of bed types, where a loft bed is perpendicularly attached to a bunk bed to form an L-shape.

The bunk or bunks above the lowest one may have rails to keep the occupant from falling off. [5]

Related Research Articles

<span class="mw-page-title-main">Sleeping bag</span> Insulated covering for a person

A sleeping bag is an insulated covering for a person, essentially a lightweight quilt that can be closed with a zipper or similar means to form a tube, which functions as lightweight, portable bedding in situations where a person is sleeping outdoors. It is also commonly used indoors for people who do not have beds or at sleepovers. Its primary purpose is to provide warmth and thermal insulation through its synthetic or down insulation. It also typically has a water-resistant or water-repellent cover that protects, to some extent, against wind chill and light precipitation, but a tent is usually used in addition to a sleeping bag, as it performs those functions better. The bottom surface also provides some cushioning, but a sleeping pad or camp cot is usually used in addition to that purpose. The bottom surface of a sleeping bag may be moderately water repellent, but a plastic tarp or groundsheet is often used to protect against moist ground.

<i>Futon</i> Traditional Japanese bedding

A futon is a traditional Japanese style of bedding.

<span class="mw-page-title-main">Air mattress</span> Type of mattress

An air mattress is an inflatable mattress or sleeping pad.

<span class="mw-page-title-main">Nightwear</span> Garments worn at night, especially to sleep in

Nightwear – also called sleepwear, or nightclothes – is clothing designed to be worn while sleeping. The style of nightwear worn may vary with the seasons, with warmer styles being worn in colder conditions and vice versa. Some styles or materials are selected to be visually appealing or erotic in addition to their functional purposes.

<span class="mw-page-title-main">Bedroom</span> Private room where people usually sleep for the night or relax during the day

A bedroom or bedchamber is a room situated within a residential or accommodation unit characterised by its usage for sleeping. A typical western bedroom contains as bedroom furniture one or two beds, a clothes closet, and bedside table and dressing table, both of which usually contain drawers. Except in bungalows, ranch style homes, ground floor apartments, or one-storey motels, bedrooms are usually on one of the floors of a dwelling that is above ground level. Beds range from a crib for an infant; a single or twin bed for a toddler, child, teenager or single adult; to bigger sizes like a full, double, queen, king or California king). Beds and bedrooms are often devised to create barriers to insects and vermin, especially mosquitoes, and to dampen or contain light or noise to aid sleep and privacy.

<span class="mw-page-title-main">Mattress</span> Large soft sheet for lying on to sleep

A mattress is a large, usually rectangular pad for supporting a lying person. It is designed to be used as a bed, or on a bed frame as part of a bed. Mattresses may consist of a quilted or similarly fastened case, usually of heavy cloth, containing materials such as hair, straw, cotton, foam rubber, or a framework of metal springs. Mattresses may also be filled with air or water.

<span class="mw-page-title-main">Bed size</span> Dimensions of sleeping mattresses

Standard bed sizes are based on standard mattress sizes, which vary from country to country. Bed sizes also vary according to the size and degree of ornamentation of the bed frame. Dimensions and names vary considerably around the world, with most countries having their own standards and terminology. In addition, two mattresses with the same nominal size may have slightly different dimensions, due to manufacturing tolerances, amount of padding, and support type. Mattress sizes may differ from bedding sizes.

<span class="mw-page-title-main">Bedding</span> Bed covering fabrics

Bedding, also called bedclothes or bed linen, is the materials laid above the mattress of a bed for hygiene, warmth, protection of the mattress, and decorative effect. Bedding is the removable and washable portion of a human sleeping environment. Multiple sets of bedding for each bed are often washed in rotation and/or changed seasonally to improve sleep comfort at varying room temperatures. Most standardized measurements for bedding are rectangular, but there are also some square-shaped sizes, which allows the user to put on bedding without having to consider its lengthwise orientation.

<span class="mw-page-title-main">U.S. Consumer Product Safety Commission</span> United States government agency

The United States Consumer Product Safety Commission is an independent agency of the United States government. The CPSC seeks to promote the safety of consumer products by addressing "unreasonable risks" of injury ; developing uniform safety standards ; and conducting research into product-related illness and injury. In part due to its small size, the CPSC attempts to coordinate with outside parties—including companies and consumer advocates—to leverage resources and expertise to achieve outcomes that advance consumer safety. The agency was created in 1972 through the Consumer Product Safety Act. The agency reports to Congress and the President; it is not part of any other department or agency in the federal government. The CPSC has five commissioners, who are nominated by the president and confirmed by the Senate for staggered seven-year terms. Historically, the commission was often run by three commissioners or fewer. Since 2009, however, the agency has generally been led by five commissioners, one of whom serves as chairman. The commissioners set policy for the CPSC. The CPSC is headquartered in Bethesda, Maryland.

<span class="mw-page-title-main">Bed</span> Piece of furniture used as a place to sleep or relax

A bed is an item of furniture that is used as a place to sleep, rest, and relax.

<span class="mw-page-title-main">Troop sleeper</span> Type of military railroad passenger car

In United States railroad terminology, a troop sleeper was a railroad passenger car which had been constructed to serve as something of a mobile barracks for transporting troops over distances sufficient to require overnight accommodations. This method allowed part of the trip to be made overnight, reducing the amount of transit time required and increasing travel efficiency.

<span class="mw-page-title-main">Blanket sleeper</span> One-piece, footed sleeping suit

The blanket sleeper is a type of especially warm sleeper or footie pajama worn primarily during the winter in the United States and Canada. The garment is worn especially by young children.

<span class="mw-page-title-main">Infant bed</span> Small bed for infants and very young children

An infant bed is a small bed especially for infants and very young children. Infant beds are a historically recent development intended to contain a child capable of standing. The cage-like design of infant beds restricts the child to the bed. Between one and two years of age, children are able to climb out and are moved to a toddler bed to prevent an injurious fall while escaping the bed.

<span class="mw-page-title-main">Fly system</span> Rigging above a theater stage

A fly system, or theatrical rigging system, is a system of ropes, pulleys, counterweights and related devices within a theater that enables a stage crew to fly (hoist) quickly, quietly and safely components such as curtains, lights, scenery, stage effects and, sometimes, people. Systems are typically designed to fly components between clear view of the audience and out of view, into the large space, the fly loft, above the stage.

<span class="mw-page-title-main">Sofa bed</span> Form of sofa that converts into a bed

A sofa bed or sofa-bed is a multifunctional furniture typically consisting of a sofa or couch that, underneath its seating cushions, hides a metal frame and thin mattress that can be unfolded or opened up to make a bed. A western-style futon differs from a sofa bed, although sofa beds using futon mattresses are common.

<span class="mw-page-title-main">Mattress protector</span> Bedding product

A mattress protector is an item of removable bedding that sits on top of, or encases, a mattress to protect it. Some mattress protectors also provide protection to the person sleeping on the mattress from allergens and irritants such as dust mites, bed bugs, mold, and dead skin.

<span class="mw-page-title-main">Mattress pad</span>

A mattress pad, mattress topper, or underpad is designed to lie atop a mattress. Made from a variety of materials including wool, cotton, memory foam, feather and latex, its function is to provide an extra layer of comfort, especially when the existing mattress is worn or uncomfortable.

<span class="mw-page-title-main">Bed base</span> Component of a bed that supports the mattress

A bed base, sometimes called a foundation, is the part of a bed that supports the mattress. The bed base can itself be held in place and framed by the bedstead. In the United States, box-spring bed bases are very common. In Europe, sprung slats are much more common.

<span class="mw-page-title-main">Sleeping berth</span> Type of bed in a vehicle

A sleeping berth is a bed or sleeping accommodation on vehicles. Space accommodations have contributed to certain common design elements of berths.

<span class="mw-page-title-main">Bedside sleeper</span> Bed for an infant attached to bed in which parent sleeps

A bedside sleeper, also referred to as a sidecar sleeper or bedside bassinet, is a bassinet or baby cot that attaches to the parents' bed, allowing newborns to sleep next to their parents safely. This is a form of safe co-sleeping, and has little risks associated with sudden infant death syndrome, unlike bedsharing. Bedside sleepers are a component of rooming-in, a practice followed in hospitals to keep the baby by the mother's bed, giving her time to establish a stronger bond with her baby.

References

  1. Weed, Frank W. (1926). "2:4: Troop Shelter". In Ireland, M. W. (ed.). The Medical Dept. of the U.S. Army in the World War. Vol. 6: Sanitation. Washington: Government Printing Office. p. 594. Retrieved 22 June 2023. Each bunk was 2 feet 8 inches wide by 6 1/2 feet long [...]. [...] Each set of bunks was separated by a space measuring 2 feet 8 inches.
  2. "US Consumer Product Safety Commission: CPSC Document #5007". Cpsc.gov. Archived from the original on 2010-12-16. Retrieved 2013-07-24. 1. Never allow children under 6 years-old on the upper bunk.
  3. "How To Build A Dorm Loft" Archived 2016-03-25 at the Wayback Machine , Elephant Staircase
  4. Tim Carter, "Building a Loft Bed" and "Build a Loft Bed" Archived October 25, 2007, at the Wayback Machine , Ask The Builder
  5. Jan 17, 2002. WIRED. "Sleeping 101" Archived November 8, 2012, at the Wayback Machine .