Cleviceras Temporal range: Early Jurassic, | |
---|---|
Cleviceras exaratum | |
Scientific classification | |
Kingdom: | Animalia |
Phylum: | Mollusca |
Class: | Cephalopoda |
Subclass: | † Ammonoidea |
Order: | † Ammonitida |
Family: | † Hildoceratidae |
Subfamily: | † Harpoceratinae |
Genus: | † Cleviceras Howarth, 1992 |
Type species | |
Ammonites exaratus Young & Bird, 1828 | |
Species | |
|
Cleviceras is an extinct genus of cephalopod belonging to the family Hildoceratidae. These cephalopods existed in the Jurassic period, during Toarcian and possibly even uppermost Pliensbachian age. [1] [2] Sometimes, it is considered to be a synonym of Eleganticeras . [3]
Genus is named after Cleveland, and area in north England. Fossils of Cleviceras exaratum, type species of this genus are very abundant there. [4]
Fossils of species contained in this genus have been found in the lower to middle Toarcian of Europe, Canada, Japan, Tibet, Siberia, Africa, or South America. [1] [2] [5] [6]
First two described members of this genus (C. exaratum and C. elegans) were described as members of today invalid genus Ammonites. Later, they were reassigned into genus Harpoceras, into which was added third member of genus Cleviceras (C. chrysanthemum), formerly member of Hildoceras. In 1992, due to recognized different evolutionary history of Harpoceras and C. exaratum with C. elegans, genus Cleviceras has been erected, but with only two members, as C. chrysanthemum has been transferred into this genus only in 1994. [2] [4] [7]
Sometimes, this genus is not considered as valid. Reasoning for this is, that when Howarth described it, he considered only specimens from Great Britain. According to him, reason for not adding species of this genus into Eleganticeras are much stronger ribs. But outside of Great Britain, there are some specimens of E. elegantulum, which also have strong ribs and on the other hand, specimens of C. exaratum are thicker, with bigger ventral area and are also more rounded than E. elegantulum. [3] This opinion is not general and Cleviceras is often considered to be a valid genus. [1] [6]
Shells of Cleviceras show dimorphism in their size. While microconchs reach 16–62 mm in diameter, macroconchs shells width is 85–200 mm. They are moderately involute, compressed and have flat whorl sides. Umbilical walls can be sloping, vertical, or undercut. Keel is strong and floored, but in abnormal specimens might be missing. This kind of abnormality has been described as invalid genus Monestieria. Under this name were added not only specimens of Cleviceras, but also members of genera Protogrammoceras and Harpoceras . Ribs are falcoid and in small sizes of shell are bifurcating, later they are single. On the outer part of whorl, they are broad and flat. In adults, ribs become striate. There are no tubercules. [1]
It differs from Eleganticeras by having stronger ribs and bigger sizes of adults in the case of both dimorphs. It is more evolute than Polyplectus. Difference between Cleviceras and early species of Harpoceras is, that Cleviceras does not have spiral groove, nor series of undulations at the falcate bend of the ribbing (but these are not appearing even in the case of all Harpoceras species). Ribs of Cleviceras are always falcoid, while in the case of some Harpoceras species, they are falcate. [1] [4] But, on some specimens of C. exaratum, there can appear grooved furrow, as in the case of type specimen. [8]
Cleviceras exaratum has probably evolved from Eleganticeras during Exaratum subzone of early Toarcian by getting much stronger ribs than its predecessor and evolved into C. elegans. This one might gave rise to Polyplectus [4] and possibly even to Pseudolioceras . [3] On the other hand, C. chrysanthemum is a possible evolutionary predecessor of Hildaites , but this genus might have also evolved from Protogrammoceras. [1] [7]
'Exaratus' is Latin word for ploughed. This name has been used because of grooved furrow on the type specimen. [8]
Involute shells that have compressed whorl section and strong keel. Umbilical walls can be vertical or undercut. There is huge size dimorphism. While adult microconchs are 16-49mm in diameter, adult macroconchs are 85-200mm in diameter. Falcoid ribs are bifurcating, or intercalated in diameters of up to 40-50mm, but then they are becoming single and at the end of the adult body chamber, they are striate. [4]
As it has evolved directly from Eleganticeras elegantulum, there exists some transitional forms, that were found in Yorkshire. While C. exaratum has larger shell diameter than E. elegantulum, it is smaller, than C. elegans, which is also always more compressed. While in E. elegantulum, umbilical width growth during ontogeny, in C. exaratum it is constant and in the case of C. elegans, it is decreasing. Strength of ornamentation is also growing during their evolutionary process. Another similar species is Harpoceras serpentinum, which has been contemporaneous with C. exaratum. It differs from this species by being more evolute, having bevelled umbilical walls, similar, but still different ribs and also by having series of undulations near falcoid bend of the ribs. [4]
Middle one-third of Exaratum Subzone of Falciferum Zone (Toarcian) of Europe, Canada and Siberia and possibly also from north Africa [4] [9]
C. elegans Sowerby, 1815
'Elegans' is a Latin word for English 'elegant'.
It is more involute than its predecessor C. exaratum and has higher whorls. Sloping umbilical wall is forming a funnel shaped umbilicus and also a more compressed whorl section. Keel is strong. Nearly all ribs are single and they are of falcoid shape.. They are weak to moderate on microconchs, but stronger in middle growth stage of macroconchs. Later at the end of the body chamber, they become striate. [4]
It is more involute than Cleviceras exaratum and Eleganticeras elegantulum, but as it is evolved directly from C. exaratum, there exists some transitional specimens. Also, C. exaratum has vertical, or undercut umbilical walls, while C. elegans has them bevelled, or sloping. C. elegans also has weaker and more striate ribs at sizes below 30mm diameter. Then, ribbing is the same. Its phylogenetic successor, genus Polyplectus has an oxycone shell with acutely angled venter, without differentiated keel and has also smaller umbilicus. There is difference in suture too, where Polyplectus has 3, or more auxiliary saddles. Harpoceras serpentinum, which has lived in the same time has a much wider umbilicus, ribs with shorter inner halves and a series of undulations at the falcoid bend of the ribs. Harpoceras falciferum has falcate ribs, much wider umbilicus and a spiral groove at the falcate bend of the ribs. [3] [4]
Upper one-third of Exaratum subzone of Falciferum zone (Toarcian) in Europe, NE of Siberia and western Canada. [3] [4]
Chrysanthemum is genus of flowering plants from the family Asteraceae, that is often used in symbols in Japan.
Shell is midvolute and its whorl section is ellipsoidal to rectangular. Vertical umbilical wall has abrupt, but still rounded umbilical shoulder. Carinate-sulcate venter is moderately wide. Keel is sharp and prominent. Sinuous, sharp and strong ribs are separated by inter-rib spaces, that are as wide as these ribs. Ribs have prorsiradiate direction up to approximately mid-flank, then they gently curve backward. After that, along ventrolateral shoulder, they again trend prorsiradiately. [2] [7]
While it occurs with Cleviceras cf. exaratum, ribs are less strongly curved. Similar species is Hildaites borealis, but it has shorter hafts of the ribs, has unicarinate-tabulate venter (and not unicarinate-bisulcate as in C. chrysanthemum) and somewhat subangular ventro-lateral shoulders, while C. chrysanthemum has gentle ventro-lateral shoulders. It is similar also to Harpoceras falciferum, but it does not have such long hafts of the ribs and also not such acute curve of the ribs in the middle of the flank. [10]
C. chrysanthemum and C. cf. chrysanthemum are found in lower to middle Toarcian sediments of Japan, Siberia, Canada and South America. [7]
Stenopterygius is an extinct genus of thunnosaur ichthyosaur known from Europe. This genus of ichthyosaur grew to a maximum length of 4 meters.
Stephanoceras is an extinct genus of Stephanoceratoid ammonite which lived during the Bajocian. It is the type genus of the family Stephanoceratidae.
Barroisiceras is an acanthoceratacean ammonite from the Upper Cretaceous, Coniacian, included in the family Collignoniceratidae.
Hildoceras is a genus of ammonite from the Jurassic period in the family Hildoceratidae. The shells are characterized by a narrow discoidal evolute shape, keeled venter, concave ribs along the outer flanks, and a shallow spiral groove running along smooth inner flanks. Whorls slightly overlap, cross sections are compressed. The ventral keel is bordered on either side by a shallow groove. The genus was named by Alpheus Hyatt after Saint Hilda in 1876.
Psiloceratoidea is a superfamily of Early Jurassic ammonoid cephalopods proposed by Hyatt in 1867, assigned to the order Ammonitida. They were very successful during Hettangian and Sinemurian. Last of them, family Cymbitidae and genera Hypoxynoticeras and Radstockiceras survived into Early Pliensbachian.
Hildoceras bifrons is an extinct species of ammonite in the family Hildoceratidae. It dates from about 175 million years ago in the Early Jurassic when it was both widespread and common. Fossils have been found in North Africa and Europe, including several regions of England.
Harpoceras is an extinct genus of ammonite belonging to the family Hildoceratidae. These cephalopods existed in the Jurassic period, during the Toarcian age from the Falciferum zone to the Commune subzone of the Bifrons zone. They were fast-moving nektonic carnivores.
Harpoceratinae is an extinct subfamily of cephalopods belonging to the family Hildoceratidae. Ammonites of this subfamily had involute and compressed shells with strong keels. Keel might be rarely missing, but this is considered to be an abnormality. This has been observed both in Cleviceras and Harpoceras and called as genus Monestieria, which is now known to be invalid. Another example is Pseudolioceras, whose unkeeled specimen was used as type for description of invalid genus Praehaploceras. Oxyconic forms of this subfamily does not have any keel. Ribs were single, but in some genera also bifurcating with shapes from sigmoidal to falcate. Sometimes, shell can have only striate ribs or is smooth. Tubercules are rare. Dimorphism is known in some genera and it is observable mostly in size. Macrochons can be 4, to 6 times larger than microconchs. As an example, macroconchs of Pseudolioceras are more than 150mm in diameter, while adult microconchs are only 35-50mm. There are big size differences even within dimorphs. Specimens ca be 2, or sometimes even 3 times bigger than other specimens of same dimorph.
Hammatoceras is a genus of ammonites belonging to the family Hammatoceratidae which lived during the Toarcian stage of the Early/Lower Jurassic between about 184 and 175 million year ago.
Taffertia is an extinct genus of cephalopod belonging to the family Hildoceratidae. These cephalopods existed in the Jurassic period, during Toarcian age in the Falciferum zone and possibly only in Exaratum subzone. Its fossils were found in Canada, Morocco, Algeria and Italy
Ovaticeras is an extinct genus of cephalopod belonging to the family Hildoceratidae. These cephalopods existed in the Jurassic period, during upper Pliensbachian and lower Toarcian. Its fossils were found in Europe, North Africa and possibly also in Canada and Vietnam. It might have evolved from Harpoceras falciferum and died out without leaving any descendants.
Osperleioceras is an extinct genus of cephalopod belonging to the family Hildoceratidae. These cephalopods existed in the Jurassic period, during Toarcian stage. Its fossils were found in Europe and South America. First species of this genus, Osperleioceras bicarinatum has evolved in what is now France from Harpoceras subplanatum.
Cheltonia is an extinct genus of ammonite from the Upper Sinemurian substage of Lower Jurassic of Europe, Africa, and America. It is probably a microconch of genus Oxynoticeras.
Radstockiceras is an extinct genus of lower Jurassic ammonite that lived from Oxynotum zone of upper Sinemurian to Raricostatum zone of lower Pliensbachian. Shells of these animals were oxycone and involute with umbilicus that took maximum of 12% of diameter in the case of outer whorls. On inner whorls, venter has been sharp, but then it became rounded. Faint ribs had falcoid shape, but sometimes, ribs could absent. Shells could have been large in their size. Suture has been very complex, similar to Oxynoticeras, but culmination at umbilical margin has been missing. Genus has been named after town of Radstock, in Somerset.
Porpoceras is genus of ammonite that lived during the early and middle Toarcian stage of early Jurassic. Members of this genus existed from uppermost part of the Harpoceras serpentinum zone to the Haugia variabilis zone. Their fossils were found in Europe, Asia, North America and South America.
Nodicoeloceras is genus of ammonite that lived during early to middle Toarcian stage of early Jurassic. Members of this genus existed from Exaratum Subzone of Falciferum Zone to Commune subzone of Bifrons Zone. Their fossils were found in Europe, northern Africa, Asia, North America and South America. It has probably evolved from Dactylioceras (Orthodactylites) or Kedonoceras and gave rise to Mesodactylites.
Transicoeloceras, which is sometimes considered to be a synonym of Catacoeloceras is genus of ammonite that lived during Toarcian stage of early Jurassic. Their fossils were found in Hungary, Italy, France, southern Spain and South America. It has evolved from Mesodactylites.
Hildoceratinae is an extinct subfamily of cephalopods belonging to the family Hildoceratidae. Ammonites of this subfamily had shells with elliptical or quadrate whorl section with keel or tricarinate, bisulcate venter. Ribs were variable, from falcate to strongly angled and from fine to strong. They can be interrupted by spiral groove in midlateral part of the shell. While some species can be smooth, strongly ribbed ones can have tubercules. Microconchs have short lapplets that is in its shape similar to the shape of growth lines in spiral midlateral groove.
Orthildaites is a genus of ammonites that lived during the lower Toarcian stage of early Jurassic, during Falciferum subzone.
Tiltoniceras is an extinct genus of cephalopod belonging to the family Hildoceratidae. These cephalopods existed in the Jurassic period, from upper Pliensbachian age, Spinatum zone until lower Toarcian, Tenuicostatum zone in what is now Europe, North America and Asian part of Russia.