The Dallara F3 cars are open-wheel formula racing car, designed, developed and built by Italian manufacturer Dallara, for Formula Three categories.
Category | Formula Three |
---|---|
Constructor | Dallara |
Predecessor | Dallara F304 |
Successor | Dallara F308 |
Technical specifications [1] | |
Chassis | Carbon fibre and Kevlar composite honeycomb monocoque covered in glass fiber composite-nomex body |
Suspension (front) | Pushrod with mono-damper system and torsion-bar springs |
Suspension (rear) | Pushrod with mono-damper system and coils springs |
Length | 4,188 mm (165 in) |
Width | 1,825 mm (72 in) including tyres |
Height | 950 mm (37 in) |
Axle track | 1,580 mm (62 in) (front) 1,465 m (57,677 in) (rear) |
Wheelbase | 2,710 mm (107 in) |
Engine | Various manufacturers 2.0 L (122 cu in) DOHC inline-4 engine naturally-aspirated, longitudinally mounted in a mid-engined, rear-wheel drive layout |
Transmission | Hewland FTR-200 6-speed sequential gearbox |
Power | ~ 220–240 hp (164–179 kW) [2] |
Weight | 550 kg (1,213 lb) including driver |
Fuel | Various unleaded control fuel |
Lubricants | Various |
Brakes | Brembo Carbon brake discs, 6-piston calipers and pads |
Tyres | Various |
Competition history | |
Debut | 2005 |
The Dallara F305 was built in 2005. [3] It became upgradable with aero kits, and its evolutions became known as the F306 and the F307, in 2006 and 2007, respectively. [4] [5] [6] [7] [8]
Category | Formula Three |
---|---|
Constructor | Dallara |
Designer(s) | Luca Pignacca Andrea Toso Jos Claes Ferdinando Concari |
Predecessor | Dallara F307 |
Successor | Dallara F312 |
Technical specifications [9] | |
Chassis | Carbon fibre monocoque |
Suspension (front) | Pushrod with twin-damper system and torsion-bar springs |
Suspension (rear) | Pushrod with twin-damper system and coils springs |
Length | 4,264 mm (168 in) |
Width | 1,835 mm (72 in) including tyres |
Height | 950 mm (37 in) |
Axle track | 1,585 mm (62 in) (front) 1,535 mm (60 in) (rear) |
Wheelbase | 2,730 mm (107 in) |
Engine | Various manufacturers (Mercedes-Benz HWA, Spiess-Volkswagen, TOM's-Toyota, Spiess-Opel, Sodemo-Renault) [10] 2.0 L (122 cu in) inline-4 engine naturally-aspirated, longitudinally mounted in a mid-engined, rear-wheel drive layout |
Transmission | Hewland 6-speed sequential |
Power | 217 hp (162 kW) [11] |
Weight | 570 kg (1,257 lb) including driver |
Fuel | Various unleaded control fuel |
Lubricants | Various |
Brakes | Carbon brake discs, 6-piston calipers and pads |
Tyres | Various OZ 9”front & 10.5”rear |
Competition history | |
Debut | 2008 |
The Dallara F308 was built in 2008. It was used in different Formula Three racing categories and competitions between 2008 and 2011. It was later replaced and succeeded by the F312, in 2012. [12] [13]
The F308 can be upgraded to either the F309, the F310, or the F311, through Dallara's annual add-on kits. These include modifications in the area of aerodynamics such as additional air deflectors or similar or improved suspension units. [14]
The F308 is a conventional Formula 3 racing car with a carbon fiber reinforced plastic monocoque, load-bearing mid-engined, and free-standing wheels. The Hewland FTR and the Pankl DGB03 gearbox are homologated for the car. It is shifted manually by means of ignition interruption and shift lever on the right side without the clutch. The front and rear wing elements, the front, and rear crash boxes, and the wheel carriers are also homologated. The bodywork can be done by the teams themselves. For example, the chimneys on the sidepods were removed from all teams in the Euroseries and the sidepods were laminated shut. [14] [15] [16]
Category | Formula Three |
---|---|
Constructor | Dallara |
Designer(s) | Luca Pignacca Andrea Toso Jos Claes Ferdinando Concari |
Predecessor | Dallara F308 |
Successor | Dallara F317 |
Technical specifications [17] | |
Chassis | Carbon fibre monocoque |
Suspension (front) | Pushrod with twin-damper system and torsion-bar springs |
Suspension (rear) | Pushrod with twin-damper system and coils springs |
Length | 4,351 mm (171 in) |
Width | 1,845 mm (73 in) including tyres |
Height | 945 mm (37 in) |
Wheelbase | 2,800 mm (110 in) |
Engine | Various manufacturers (Mercedes-Benz F3 414, Volkswagen Spiess 0XY, Tomei-ThreeBond TB14F3, TOM's Toyota TAZ31, Mugen-Honda MF204D and Toda TR-F301) 2.0 L (122 cu in) inline-4 engine naturally-aspirated, longitudinally mounted in a mid-engined, rear-wheel drive layout |
Transmission | 6-speed semi-automatic sequential gearbox |
Power | 240 hp (179 kW) |
Weight | 580 kg (1,279 lb) including driver |
Fuel | Various unleaded control fuel |
Lubricants | Various |
Brakes | Carbon brake discs, 6-piston calipers and pads |
Tyres | Various |
Competition history | |
Debut | 2012 |
The Dallara F312 proved to be one of the most popular Formula 3 Chassis ever, with over 53 of the original type having been produced. [18] Even after its successor the Dallara F317 was introduced, the F312 remained widely used, in championships such as the Euroformula Open Championship and the Japanese Formula 3 Championship.
The Dallara F312 was designed to meet the new for 2012 FIA Formula 3 regulations, which were much more restrictive compared to previous Formula 3 regulations, and led to reduced downforce levels. [19] Compared to the previous generation Dallara F308, the 312 features a higher monocoque and a lower nose-section than the outgoing model, with the front dampers and springs being placed inside the tub, a first for a Dallara F3 car, alongside a revised aerodynamic package. The car was unveiled at the Masters of Formula 3 event on the 20th of October 2011 at Circuit Zandvoort, in the Netherlands. [20]
Category | Formula Three |
---|---|
Constructor | Dallara |
Designer(s) | Luca Pignacca Andrea Toso Ferdinando Concari |
Predecessor | Dallara F312 |
Successor | Dallara 320 |
Technical specifications [21] | |
Chassis | Carbon fibre monocoque |
Suspension (front) | Pushrod with twin-damper system and torsion-bar springs |
Suspension (rear) | Pushrod with twin-damper system and coils springs |
Length | 4,351 mm (171 in) |
Width | 1,845 mm (73 in) including tyres |
Height | 945 mm (37 in) |
Wheelbase | 2,800 mm (110 in) |
Engine | Various manufacturers (Mercedes-Benz F3 414, Volkswagen Spiess 0XY, Tomei-ThreeBond TB14F3, TOM's Toyota TAZ31, Mugen-Honda MF204D and Toda TR-F301) 2.0 L (122 cu in) inline-4 engine naturally-aspirated, longitudinally mounted in a mid-engined, rear-wheel drive layout |
Transmission | 6-speed semi-automatic sequential gearbox |
Power | 240 hp (179 kW) |
Weight | 580 kg (1,279 lb) including driver |
Fuel | Various unleaded control fuel |
Lubricants | Various |
Brakes | Carbon brake discs, 6-piston calipers and pads |
Tyres | Various |
Competition history | |
Debut | 2017 |
The Dallara F317 is the thirty-seventh car used by the FIA-sanctioned Formula Three championships. Although the F317 is only an aero-upgraded F312 chassis, it works as a replacement for the aging Dallara F312 chassis. [22] However, some series like the Euroformula Open Championship opted for a slightly upgraded F312 chassis instead of the F317 package to keep costs low.
Formula Three, also called Formula 3, abbreviated as F3, is a third-tier class of open-wheel formula racing. The various championships held in Europe, Australia, South America and Asia form an important step for many prospective Formula One drivers.
The Euroformula Open Championship is a junior formula racing series based in Spain. It was one of six national and international Formula Three championships in Europe that together used to form an important part of the established "career ladder" below Formula One. The championship's first season was held in 2001. In 2006, it was branded as the Spanish F3 Championship by Toyota, in deference to its sole engine supplier. In 2020, the championship ceased to be a F3-championship and will share its specifications with Japan's Super Formula Lights based on the previous-generation Formula Three standards, primarily with a choice of engines.
Double R Racing is a motor racing team, which currently races in the 2023 F4 British Championship. The team was formed in November 2004 as Räikkönen Robertson Racing by then McLaren Formula One driver and 2007 world champion with Ferrari, Kimi Räikkönen, and his race manager Steve Robertson, a former Formula Three driver. It is based in Woking, site of the McLaren manufacturing facility, and it is managed by Anthony "Boyo" Hieatt.
The FIA Formula 3 European Championship was a European Formula Three (F3) auto racing competition, organised by the Fédération Internationale de l'Automobile (FIA). After one season of the FIA Formula 3 International Trophy, the FIA revived the FIA Formula 3 European Championship. The ten-event season included seven Formula 3 Euro Series rounds, two British Formula Three rounds and DTM-supporting round at Brands Hatch. From 2013, the series started running its own rounds, based upon the defunct Formula 3 Euro Series.
Japanese Formula 3 Championship was a national motor racing championship that takes place in Japan. It is a junior-level feeder formula that uses small single seater Formula Three chassis.
The 2009 European F3 Open Championship was the first season with the new championship denomination after eight seasons of the Spanish Formula Three Championship. It began on 2 May 2009 in Valencia and will end on 1 November in Montmeló after 16 rounds in five different countries. The main Class A title was claimed by Bruno Méndez, holding off Celso Míguez by just two points. Callum MacLeod won the secondary Copa F306/300, as well as finishing ninth in the overall championship. Méndez's team Campos Racing also claimed the teams title, beating main rivals Drivex by seven points.
Team West-Tec F3 is a motor racing team owned by Gavin Wills and John Miller based in Corby in the United Kingdom, the most successful team in the history of the European F3 Open Championship, it also won two drivers championships in the ASCAR Racing Series.
The GB3 Championship is a single seater motorsport series based in the United Kingdom. The championship is the UK's premier single-seater category, and is aimed at young racing drivers moving up from FIA Formula 4 championships or Karting. Having previously been known since 2013 as the BRDC Formula 4 Championship, the championship was renamed the BRDC British Formula 3 Championship with the backing of the FIA in March 2016. The championship was rebranded to GB3 Championship in August 2021.
The 2012 European F3 Open Championship was the fourth European F3 Open Championship season. The series introduced the new Dallara F312 cars for Class A, with the F308 model being implemented for the Copa Class.
The 2014 Euroformula Open Championship was a multi-event motor racing championship for single-seat open wheel formula racing cars that was held across Europe. The championship featured drivers competing in two-litre Formula Three racing cars built by Italian constructor Dallara which conformed to the technical regulations, or formula, for the championship. It was the first edition of the Euroformula Open Championship – following a name change in February 2014 – after five seasons at the European F3 Open Championship. It is also included a revived three-round Spanish Formula Three Championship, held within the season calendar.
The 2017 FIA Formula 3 European Championship is a multi-event motor racing championship for third-tier single-seat open wheel formula racing cars that is held across Europe. The championship featured drivers competing in two-litre Formula Three racing cars which conform to the technical regulations, or formula, for the championship. It was the sixth edition of the FIA Formula 3 European Championship.
The 2018 FIA Formula 3 European Championship was the seventh and final season of the FIA Formula 3 European Championship, a multi-event motor racing championship for third-tier single-seat open wheel formula racing cars that is held across Europe. The championship features drivers competing in two-litre Formula 3 racing cars which conform to the technical regulations, or formula, for the championship. Teams and drivers competed in ten rounds, running in support of a variety of European motorsport championships including the Deutsche Tourenwagen Masters, Blancpain GT Series Endurance Cup and the FIA World Endurance Championship.
The 2018 Euroformula Open Championship is a multi-event motor racing championship for single-seat open wheel formula racing cars that is held across Europe. The championship features drivers competing in two-litre Formula Three racing cars built by Italian constructor Dallara which conform to the technical regulations, or formula, for the championship. It was the fifth Euroformula Open Championship season.
The 2019 Euroformula Open Championship was a multi-event motor racing championship for single-seat open wheel formula racing cars that held across Europe. The championship features drivers competing in two-litre Formula Three racing cars built by Italian constructor Dallara which conform to the technical regulations, or formula, for the championship. It was the sixth Euroformula Open Championship season.
The Dallara F3 2019 is an open-wheel racing car developed by Italian manufacturer Dallara for use in the FIA Formula 3 Championship, a feeder series for Formula One. The F3 2019 is the first car used by the FIA Formula 3 Championship and was introduced for the championship's inaugural season and scheduled to be used until the 2024 season before being replaced by planned Dallara F3 2025 from 2025 season onwards. As the Formula 3 Championship is a spec series, the F3 2019 is raced by every team and driver competing in the series. The F3 2019 was unveiled at the weekend of the final GP3 Series round in Abu Dhabi in November 2018 and later made its first public appearance when teams contesting the inaugural championship completed a test day at the Circuit de Nevers Magny-Cours in February 2019.
The 2020 Euroformula Open Championship was a multi-event motor racing championship for single-seater open wheel formula racing cars that was held across Europe. The championship featured drivers competing in the new Dallara 320 car, which features the Halo safety device. It was the seventh Euroformula Open Championship season.
Super Formula Lights is a national formula racing championship that takes place in Japan. It is a junior-level feeder formula that uses the same single seater chassis as the pan-European Euroformula Open Championship. The series will be the first with the new branding as a feeder series for the Super Formula championship. The nomenclature is similar to that of IndyCar, whose support series formerly used the "Lights" moniker as well.
The 2021 Euroformula Open Championship was a multi-event motor racing championship for single-seater open wheel formula racing cars that was held across Europe. The championship featured drivers competing in Euroformula Open Championship specification Dallara 320 chassis cars. It was the eighth Euroformula Open Championship season.
The Dallara 320 is an open-wheel racing car developed by Italian manufacturer Dallara for use in the Euroformula Open Championship and Super Formula Lights. It was built as an upgraded version of the Dallara F317 chassis in which it replaces.
The Reynard F3000 cars are open-wheeled Formula 3000 cars, designed and developed by Malcolm Oastler, and constructed and built by British manufacturer Reynard Motorsport.