Diargon

Last updated
Diargon
Diargon-3D-vdW.png
Names
Other names
argon dimer
Identifiers
3D model (JSmol)
PubChem CID
  • InChI=1S/2Ar
    Key: XMPZLAQHPIBDSO-UHFFFAOYSA-N
  • [Ar].[Ar]
Properties
Ar2
Molar mass 79.896 g·mol−1
Appearancetransparent gas
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

Diargon or the argon dimer is a molecule containing two argon atoms. Normally, this is only very weakly bound together by van der Waals forces (a van der Waals molecule). However, in an excited state, or ionised state, the two atoms can be more tightly bound together, with significant spectral features. At cryogenic temperatures, argon gas can have a few percent of diargon molecules. [1]

Contents

Theory

Interaction energy of argon dimer Argon dimer potential.png
Interaction energy of argon dimer

Two argon atoms are attracted together by van der Waals forces when far from each other. When they are close, electrostatic forces repel them. There is a balance point where the van der Waals force matches the opposing repelling force, where energy is at a minimum, represented as the trough in the graph of interaction energy versus distance. This distance is the ground state of the unexcited argon dimer. In a vibrating molecule, the distance between the atoms bounces backwards and forwards from one side of the trough to the other. Faster vibrations will force the state up to higher levels in the energy trough. If the vibration is too much the molecule will break up. In a rotating molecule, the centrifugal force drags the atoms apart, but can still be overcome by the attractive force. But if the rotation is too much the atoms break apart.

Properties

The ionisation energy of the neutral molecule is 14.4558 eV (or 116593 cm−1). [2]

The dissociation energy of neutral Ar2 in the ground state is 98.7 cm−1 [3] which is hundreds of times weaker than that of typical molecules. [1] The dissociation energy of Ar2+ is 1.3144 eV or 10601 cm−1. [4]

The Ar2 molecule can exist in a number of different vibration and rotational states. If the molecule is not rotating, there are eight different vibration states. But if the molecule spins fast, vibration is more likely to shake it apart, and at the 30th rotational level there are only two stable and one metastable state of vibration. In combination, there are 170 different possibilities that are stable. In the metastable states, energy will be released if the molecule breaks apart into two separate atoms, but some extra energy is required to overcome the attraction between the atoms. Quantum tunneling can result in the molecule breaking apart with no extra energy. However this takes time, which can vary from 10−11 seconds to several centuries. [1] Molecules crashing into each other also results in breakup of the van der Waals molecules. At standard conditions this only takes about 100 picoseconds. [1]

Excited states

Neutral

99.6% of the argon isotopes are 40Ar, so the spectrum observed in natural argon dimer will be due to the 40Ar40Ar isotopomer. [5] The following table lists different excited states. [6]

ParameterTeωeωexeωeyeBeαeγeDeβereν00Re Åref
H112033.9
G110930.9
F 0+
g
108492.2
E107330
D106029.5
C 0+
g
95050.7
B1Σu+ 0+
g
93241.26
A3Σ2u+1u92393.3
X1Σg+31.923.310.110.0600.00476.93.8 [1] [5]

Cation

ParameterbreakupTeωeωexeωeyeBeαeγeDeβereν00Re Åref
D2Σ1/2u+Ar1S0 + Ar+2P1/2
C2Π1/2uAr1S0 + Ar+2P1/2128 00458.91.4622 cm−1 [7]
B2Π1/2gAr1S0 + Ar+2P3/2
C2Π3/2uAr1S0 + Ar+2P3/2126884311 cm−1 [7]
B2Π3/2g+Ar1S0 + Ar+2P3/20.104 eV [3]
A2Σ1/2u+Ar1S0 + Ar+2P3/2116591307.02.05622 cm−1 ?1.361 eV [3] [4] [7]

Related Research Articles

<span class="mw-page-title-main">Infrared spectroscopy</span> Measurement of infrared radiations interaction with matter

Infrared spectroscopy is the measurement of the interaction of infrared radiation with matter by absorption, emission, or reflection. It is used to study and identify chemical substances or functional groups in solid, liquid, or gaseous forms. It can be used to characterize new materials or identify and verify known and unknown samples. The method or technique of infrared spectroscopy is conducted with an instrument called an infrared spectrometer which produces an infrared spectrum. An IR spectrum can be visualized in a graph of infrared light absorbance on the vertical axis vs. frequency, wavenumber or wavelength on the horizontal axis. Typical units of wavenumber used in IR spectra are reciprocal centimeters, with the symbol cm−1. Units of IR wavelength are commonly given in micrometers, symbol μm, which are related to the wavenumber in a reciprocal way. A common laboratory instrument that uses this technique is a Fourier transform infrared (FTIR) spectrometer. Two-dimensional IR is also possible as discussed below.

Dilithium, Li2, is a strongly electrophilic, diatomic molecule comprising two lithium atoms covalently bonded together. Li2 is known in the gas phase. It has a bond order of 1, an internuclear separation of 267.3 pm and a bond energy of 102 kJ/mol or 1.06 eV in each bond. The electron configuration of Li2 may be written as σ2.

<span class="mw-page-title-main">Rotational spectroscopy</span> Spectroscopy of quantized rotational states of gases

Rotational spectroscopy is concerned with the measurement of the energies of transitions between quantized rotational states of molecules in the gas phase. The spectra of polar molecules can be measured in absorption or emission by microwave spectroscopy or by far infrared spectroscopy. The rotational spectra of non-polar molecules cannot be observed by those methods, but can be observed and measured by Raman spectroscopy. Rotational spectroscopy is sometimes referred to as pure rotational spectroscopy to distinguish it from rotational-vibrational spectroscopy where changes in rotational energy occur together with changes in vibrational energy, and also from ro-vibronic spectroscopy where rotational, vibrational and electronic energy changes occur simultaneously.

<span class="mw-page-title-main">Molecular physics</span> Study of the physical and chemical properties of molecules

Molecular physics is the study of the physical properties of molecules and molecular dynamics. The field overlaps significantly with physical chemistry, chemical physics, and quantum chemistry. It is often considered as a sub-field of atomic, molecular, and optical physics. Research groups studying molecular physics are typically designated as one of these other fields. Molecular physics addresses phenomena due to both molecular structure and individual atomic processes within molecules. Like atomic physics, it relies on a combination of classical and quantum mechanics to describe interactions between electromagnetic radiation and matter. Experiments in the field often rely heavily on techniques borrowed from atomic physics, such as spectroscopy and scattering.

<span class="mw-page-title-main">Morse potential</span> Model for the potential energy of a diatomic molecule

The Morse potential, named after physicist Philip M. Morse, is a convenient interatomic interaction model for the potential energy of a diatomic molecule. It is a better approximation for the vibrational structure of the molecule than the quantum harmonic oscillator because it explicitly includes the effects of bond breaking, such as the existence of unbound states. It also accounts for the anharmonicity of real bonds and the non-zero transition probability for overtone and combination bands. The Morse potential can also be used to model other interactions such as the interaction between an atom and a surface. Due to its simplicity, it is not used in modern spectroscopy. However, its mathematical form inspired the MLR (Morse/Long-range) potential, which is the most popular potential energy function used for fitting spectroscopic data.

<span class="mw-page-title-main">Matrix isolation</span> Experimental chemistry technique

Matrix isolation is an experimental technique used in chemistry and physics. It generally involves a material being trapped within an unreactive matrix. A host matrix is a continuous solid phase in which guest particles are embedded. The guest is said to be isolated within the host matrix. Initially the term matrix-isolation was used to describe the placing of a chemical species in any unreactive material, often polymers or resins, but more recently has referred specifically to gases in low-temperature solids. A typical matrix isolation experiment involves a guest sample being diluted in the gas phase with the host material, usually a noble gas or nitrogen. This mixture is then deposited on a window that is cooled to below the melting point of the host gas. The sample may then be studied using various spectroscopic procedures.

<span class="mw-page-title-main">Spartan (chemistry software)</span>

Spartan is a molecular modelling and computational chemistry application from Wavefunction. It contains code for molecular mechanics, semi-empirical methods, ab initio models, density functional models, post-Hartree–Fock models, and thermochemical recipes including G3(MP2) and T1. Quantum chemistry calculations in Spartan are powered by Q-Chem.

<span class="mw-page-title-main">Van der Waals molecule</span> Weakly bound complex of atoms or molecules

A Van der Waals molecule is a weakly bound complex of atoms or molecules held together by intermolecular attractions such as Van der Waals forces or by hydrogen bonds. The name originated in the beginning of the 1970s when stable molecular clusters were regularly observed in molecular beam microwave spectroscopy.

Giacinto Scoles is a European and North American chemist and physicist who is best known for his pioneering development of molecular beam methods for the study of weak van der Waals forces between atoms, molecules, and surfaces. He developed the cryogenic bolometer as a universal detector of atomic and molecule beams that not only can detect a small flux of molecules, but also responds to the internal energy of the molecules. This is the basis for the optothermal spectroscopy technique which Scoles and others have used to obtain very high signal-to noise and high resolution ro-vibrational spectra.

Xenon monochloride (XeCl) is an exciplex which is used in excimer lasers and excimer lamps emitting near ultraviolet light at 308 nm. It is most commonly used in medicine. Xenon monochloride was first synthesized in the 1960s. Its kinetic scheme is very complex and its state changes occur on a nanosecond timescale. In the gaseous state, at least two kinds of xenon monochloride are known: XeCl and Xe
2
Cl
, whereas complex aggregates form in the solid state in noble gas matrices. The excited state of xenon resembles halogens and it reacts with them to form excited molecular compounds.

<span class="mw-page-title-main">Calcium monohydride</span> Chemical compound

Calcium monohydride is a molecule composed of calcium and hydrogen with formula CaH. It can be found in stars as a gas formed when calcium atoms are present with hydrogen atoms.

<span class="mw-page-title-main">Magnesium monohydride</span> Chemical compound

Magnesium monohydride is a molecular gas with formula MgH that exists at high temperatures, such as the atmospheres of the Sun and stars. It was originally known as magnesium hydride, although that name is now more commonly used when referring to the similar chemical magnesium dihydride.

<span class="mw-page-title-main">Helium dimer</span> Chemical compound

The helium dimer is a van der Waals molecule with formula He2 consisting of two helium atoms. This chemical is the largest diatomic molecule—a molecule consisting of two atoms bonded together. The bond that holds this dimer together is so weak that it will break if the molecule rotates, or vibrates too much. It can only exist at very low cryogenic temperatures.

Helium is the smallest and the lightest noble gas and one of the most unreactive elements, so it was commonly considered that helium compounds cannot exist at all, or at least under normal conditions. Helium's first ionization energy of 24.57 eV is the highest of any element. Helium has a complete shell of electrons, and in this form the atom does not readily accept any extra electrons nor join with anything to make covalent compounds. The electron affinity is 0.080 eV, which is very close to zero. The helium atom is small with the radius of the outer electron shell at 0.29 Å. Helium is a very hard atom with a Pearson hardness of 12.3 eV. It has the lowest polarizability of any kind of atom, however, very weak van der Waals forces exist between helium and other atoms. This force may exceed repulsive forces, so at extremely low temperatures helium may form van der Waals molecules. Helium has the lowest boiling point of any known substance.

Neon compounds are chemical compounds containing the element neon (Ne) with other molecules or elements from the periodic table. Compounds of the noble gas neon were believed not to exist, but there are now known to be molecular ions containing neon, as well as temporary excited neon-containing molecules called excimers. Several neutral neon molecules have also been predicted to be stable, but are yet to be discovered in nature. Neon has been shown to crystallize with other substances and form clathrates or Van der Waals solids.

Argon compounds, the chemical compounds that contain the element argon, are rarely encountered due to the inertness of the argon atom. However, compounds of argon have been detected in inert gas matrix isolation, cold gases, and plasmas, and molecular ions containing argon have been made and also detected in space. One solid interstitial compound of argon, Ar1C60 is stable at room temperature. Ar1C60 was discovered by the CSIRO.

<span class="mw-page-title-main">Argonium</span> Chemical compound

Argonium (also called the argon hydride cation, the hydridoargon(1+) ion, or protonated argon; chemical formula ArH+) is a cation combining a proton and an argon atom. It can be made in an electric discharge, and was the first noble gas molecular ion to be found in interstellar space.

The magnesium argide ion, MgAr+ is an ion composed of one ionised magnesium atom, Mg+ and an argon atom. It is important in inductively coupled plasma mass spectrometry and in the study of the field around the magnesium ion. The ionization potential of magnesium is lower than the first excitation state of argon, so the positive charge in MgAr+ will reside on the magnesium atom. Neutral MgAr molecules can also exist in an excited state.

<span class="mw-page-title-main">Dirubidium</span> Chemical compound

Dirubidium is a molecular substance containing two atoms of rubidium found in rubidium vapour. Dirubidium has two active valence electrons. It is studied both in theory and with experiment. The rubidium trimer has also been observed.

Kwong-Tin Tang is an engineer, academic and researcher. He is an Emeritus Professor of Physics at the Pacific Lutheran University, Tacoma.

References

  1. 1 2 3 4 5 Ewing, George E. (June 1975). "Structure and Properties of van der Waals Molecules". Accounts of Chemical Research. 8 (6): 185–192. doi:10.1021/ar50090a001.
  2. Dehmer, P. M.; Pratt, S. T. (15 January 1982). "Photoionization of argon clusters". The Journal of Chemical Physics. 76 (2): 843–853. Bibcode:1982JChPh..76..843D. doi:10.1063/1.443056.
  3. 1 2 3 Pradeep, T.; Niu, B.; Shirley, D. A. (April 1993). "Photoelectron spectroscopy of rare gas dimers revisited: Vibrationally resolved photoelectron spectrum of argon dimer" (PDF). The Journal of Chemical Physics. 98 (7): 5269–5275. Bibcode:1993JChPh..98.5269P. doi:10.1063/1.464926. S2CID   96815402.
  4. 1 2 Signorell, R.; Wüest, A.; Merkt, F. (22 December 1997). "The first adiabatic ionization potential of Ar2". The Journal of Chemical Physics. 107 (24): 10819–10822. Bibcode:1997JChPh.10710819S. doi: 10.1063/1.474199 .
  5. 1 2 Docken, Kate K.; Schafer, Trudy P. (June 1973). "Spectroscopic information on ground-state Ar2, Kr2, and Xe2 from interatomic potentials". Journal of Molecular Spectroscopy. 46 (3): 454–459. Bibcode:1973JMoSp..46..454D. doi:10.1016/0022-2852(73)90057-X.
  6. "Argon dimer". NIST Standard Reference Database 69: NIST Chemistry WebBook. Retrieved 19 February 2018.
  7. 1 2 3 Signorell, R.; Merkt, F. (8 December 1998). "The first electronic states of Ar2+ studied by high resolution photoelectron spectroscopy". The Journal of Chemical Physics. 109 (22): 9762–9771. Bibcode:1998JChPh.109.9762S. doi:10.1063/1.477646.

Extra references