This article needs additional citations for verification .(August 2010) |
Ford SHO V6 | |
---|---|
Overview | |
Manufacturer | Yamaha Motor Corporation |
Production | 1989–1995 |
Layout | |
Configuration | Naturally aspirated 60° V6 |
Displacement | 3.0 L; 182.2 cu in (2,986 cc) 3.2 L; 194.7 cu in (3,191 cc) |
Cylinder bore | 89 mm (3.5 in) 92 mm (3.62 in) |
Piston stroke | 80 mm (3.15 in) |
Cylinder block material | Iron |
Cylinder head material | Aluminum |
Valvetrain | DOHC 24-valve |
RPM range | |
Max. engine speed | 7000 |
Combustion | |
Fuel system | Fuel injection |
Fuel type | Gasoline |
Cooling system | Water-cooled |
Output | |
Power output | 220 hp (164 kW) at 6200 rpm (3.0L) 220 hp (164 kW) at 6000 rpm (3.2L) |
Torque output | 200 lb⋅ft (271 N⋅m) at 4800 rpm (3.0L) 215 lb⋅ft (292 N⋅m) at 4000 rpm (3.2L) |
Chronology | |
Successor | Ford SHO V8 |
The Ford SHO V6 is a family of DOHC V6 engines fitted to the Ford Taurus SHO from 1989 to 1995. The designation SHO denotes Super High Output. [1]
Due to the engine's unusual and aesthetically pleasing appearance it is sometimes transplanted into other vehicles. Its distinctive variable length intake manifold is bilaterally symmetrical, so it can be rotated 180 degrees (making it face "backwards" on the engine, relative to its original installation orientation) to ease the engine's transition from transverse to longitudinal mounting. [2] [3] [4] [5] [6] [7]
The SHO engines share a common bell housing pattern with the following Ford engines: the 2.3/2.5 L FWD HSC I4, the 3.0 L FWD/RWD Vulcan V6, and the 3.8 L FWD Canadian Essex V6. [8] In 1996, Ford discontinued the SHO V6 and began fitting the Taurus SHOs with the SHO 3.4 L V8 and the Ford AX4N automatic transmission.
In 1984, executives of the Yamaha Motor Corporation signed a contract with the Ford Motor Company to develop, produce, and supply a compact 60° DOHC V6 engine based upon the existing Vulcan engine for transverse application. [9] [10]
There has been some confusion about the original intended use of the engine. It was thought this engine was first intended to power a mid-engine sports car, that project (known internally as GN34) was canceled. Patents have been found and pictures of prototype SHO powerplants installed in the Taurus show that the original intent was for the larger FWD setup and the GN34 would have come later.[ citation needed ] There were a few GN34 prototypes produced, most with standard Vulcan engines and a few other factory swaps, a SHO Ranger being one.
The SHO V6 was a high-tech and revolutionary design when it debuted in 1988. Displacing 3.0 L; 182.2 cu in (2,986 cc), it was an iron block, aluminum head 24-valve DOHC engine with an innovative variable length intake manifold. Its oversquare and symmetrical design, which sported an 89 mm × 80 mm (3.50 in × 3.15 in) bore and stroke, gave the high-revving engine an output of 220 bhp (164 kW; 223 PS) at 6200 rpm and 200 lb⋅ft (271 N⋅m) of torque at 4800 rpm at the flywheel, and it sported the added luxury of being able to be used in rear-drive applications. Redline was marked on the tachometer at 7000 rpm, and fuel cut-off occurred at 7300 rpm. This engine was only available with the Ford MTX-IV transmission.
From 1993 to 1995, the SHO engine was sold in two displacements: the existing 3.0 L (2,986 cc) continued to be sold mated to the MTX-IV manual transmission, and a new 3.2 L; 194.7 cu in (3,191 cc) engine was sold mated to the Ford AX4S automatic transmission. The new 3.2 L (3,191 cc) engine, while retaining the same 80 mm (3.15 in) stroke of its 3.0 L (2,986 cc) brother, sported a larger 92 mm (3.62 in) bore that helped raise torque output to 215 lb⋅ft (292 N⋅m) at 4000 rpm at the flywheel. [11] Horsepower output was still 220 bhp (164 kW; 223 PS), but now at 6000 rpm: This was due to a milder cam setup compared to the more aggressive intake camshaft in the 3.0 L (2,986 cc) version.
In 1989, with the help of Roush Racing, Ford Truck Public Affairs created a one-off Ford Ranger, dubbed the "SHO Ranger", with a 3.0 L (2,986 cc) SHO V6 and a Mustang GT's T-5 manual transmission. According to D.A. "Woody" Haines, assistant manager of that division, they commissioned the project truck "to test the market." [12] [13]
In 1993, Ford Canada hand-built 40 Mercury Sables, some of which were powered by SHO V6 engines, as part of their AIV (Aluminum Intensive Vehicle) program and released 20 to the public. Using aluminum suspension elements and aluminum body panels, held together with spot welding and adhesive joining processes developed specifically for this vehicle, the end result was a car that was 400 lb (180 kg) lighter than a SHO Taurus. Multimatic Motorsports entered one of these vehicles in the 1995 One Lap of America event, finishing 15th overall and 1st in the Mid-Price class. [14] [15] [16] [17]
A popular modification to cars equipped with the 3.0 L (2,986 cc) SHO engine is to replace the engine with a 3.2 L (3,191 cc) engine. Further modification can include installing the cams from a 3.0 L (2,986 cc) engine into a 3.2 L (3,191 cc) engine. These more aggressive cams, along with a higher torque output have been known to allow the manual transmission-equipped Taurus SHO to run into the low 14s on the 1⁄4 mi (402 m).[ citation needed ]
In 1990, Chuck Beck of Special Editions and Rick Titus took seven Ford Festivas and mounted 3.0 L (2,986 cc) SHO V6s − still mated to their native transmissions − behind the front seats in mid-rear engine configuration. Along with substantial cosmetic body changes, including custom fiberglass wheel arches to accommodate a wider stance and larger tires, the suspension was completely redesigned. Each car was painted a different color. These changes resulted in a car that could travel the 1⁄4 mi (402 m) in 12.9 seconds at 100.9 mph (162.4 km/h), and could achieve a lateral acceleration figure ranging from .95 to 1.04 g. Two of the seven are notable; Jay Leno owns number 003 (the silver one), and number 005 (the purple one) included special modifications for competition in the SCCA, including a rollcage and 5-point restraints. [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] One was destroyed in the 2021–2022 Boulder County fires. [29]
Since the creation of these cars, others have imitated the idea by performing SHO-to-Festiva transplants of their own. [30]
The Ford Taurus is an automobile that was manufactured by the Ford Motor Company in the United States from the 1986 to 2019 model years. Introduced in late 1985 for the 1986 model year, six generations were produced over 34 years; a brief hiatus was undertaken between 2006 and 2007. From the 1986 to 2009 model years, the Taurus was sold alongside its near-twin, the Mercury Sable; four generations of the high-performance Ford Taurus SHO were produced. The Taurus also served as the basis for the first-ever front-wheel-drive Lincoln Continental (1988–2002).
The Ford Festiva is a subcompact car that was designed and manufactured by Mazda for Ford between 1986 and 2002. Festiva was sold in Japan, the Americas, and Australia. The name "Festiva" is derived from the Spanish word for "festive". It was not related to the similarly sized and named Ford Fiesta, and was not replaced by the Ford Ka, which is smaller.
The Mercury Sable is a range of automobiles manufactured and marketed by the Mercury brand of Ford Motor Company. Introduced on December 26, 1985, as the replacement for the Mercury Marquis, the Sable marked the transition of the mid-size Mercury product range to front-wheel drive.
The Ford Vulcan is a 3.0 L V6 engine designed and built by the Ford Motor Company. It debuted in 1986 in the newly launched Ford Taurus. Ford went on to install the Vulcan V6 in a variety of car, van, and pickup truck models until the 2008 model year, after which production stopped.
The Mazda K-series automobile engine is a short stroke 60° 24-valve V6 with belt-driven DOHC and all-aluminium construction. Displacements range from 1.8 L to 2.5 L. They all use a 27-degree DOHC valvetrain with directly actuated hydraulic bucket lifters. The K-series also features a highly rigid aluminum split-crankcase engine block design with 4-bolt mains with additional bolts securing the lower block, an internally balanced forged steel crankshaft with lightweight powder forged carbon steel connecting rods. They were designed with the intent of being as compact as possible for short-hood front-wheel drive applications.
The Ford Super High Output (SHO) V8 engine was designed and built by Ford Motor Company in conjunction with Yamaha Motor Corporation for use in the 1996 Ford Taurus SHO. It was based on the successful Ford Duratec engine rather than its predecessor, the compact Ford SHO V6 engine developed by Yamaha for the 1989 Taurus SHO. The engine was retired in 1999 when production of the third-generation Taurus SHO ended.
The Essex V6 is a 90° V6 engine family built by the Ford Motor Company at the Essex Engine Plant in Windsor, Ontario, Canada. This engine is unrelated to Ford's British Essex V6. Introduced in 1982, versions of the Essex V6 engine family were used in subcompact through to large cars, vans, minivans, and some pickup trucks. The Essex V6 was last used in the 2008 regular-cab F-150, after which it was succeeded by a version of the Ford Cyclone engine. An industrial version of the engine was available until 2015.
The VK engine is a V8 piston engine from Nissan. It is an aluminum DOHC 4-valve design.
The Ford Taurus SHO is the high-performance variant of the Ford Taurus. Originally intended as a limited-production model, the SHO would be produced for the first three generations of the model line, from the 1989 to the 1999 model years. After an 11-year hiatus, the model was revived for 2010, continuing through the 2019 discontinuation of the Taurus model line.
The Cyclone engine, also branded Duratec, is Ford Motor Company's latest DOHC family of gasoline V6 engines introduced in 2006. The Cyclone succeeds Ford's previous V6 engine families, including the Canadian built Ford Essex engine introduced in 1981, the Ford Vulcan engine introduced in 1985, the original Duratec V6 introduced in 1993, and the Ford Cologne V6 engine, whose design dates back to 1962. The first version of the Cyclone engine, a 3.5 L V6, appeared in the 2007 Ford Edge and the Lincoln-badged luxury variant, the Lincoln MKX, as well as the Lincoln MKZ. Mazda badges its versions of the Cyclone MZI as it did with its versions of the Duratec V6.
The Ford Duratec V6, is an aluminum DOHC V6 engine with a 60° bank angle introduced in 1993 with the Ford Mondeo. The primary engineering input came from Porsche, who was developing a similar V6 before selling the engineering to Ford, and Cosworth, who helped with cylinder head manufacturing. The Jaguar AJ-V6 engine is similar but adds variable valve timing.
The Lincoln MKS is a full-sized luxury sedan that was manufactured and marketed by the Lincoln subdivision of Ford from 2008 to 2016. First shown at the LA Auto Show in November 2007, the MKS began production for the 2009 model year at Ford's Chicago Assembly plant in May 2008 with sales beginning a month later. The MKS was the second Lincoln to adopt the "MK" nomenclature and the first model to wear it through its entire production run. With the discontinuation of the Lincoln Town Car in 2011, the MKS at 205.6-inches in length became the longest production sedan sold by an American automaker through 2016.
The fourth-generation Ford Mustang is an automobile that was produced by the American automobile manufacturer Ford Motor Company for the 1994 through 2004 model years. Marking the first major redesign of the Ford Mustang in fifteen years, the fourth generation of the pony car was introduced in November 1993 with the launch taking place on December 9, 1993. The design, was based on an updated version of the Fox platform and was the final vehicle underpinned with this platform. It featured styling by Bud Magaldi that incorporated some stylistic elements from the classic Mustangs. A convertible model returned, but the previous notchback and hatchback bodystyles were discontinued in favor of a conventional 2-door coupe design.
The fifth-generation Ford Mustang (S197) is a pony car manufactured and marketed by Ford from 2004 to 2014, for the 2005 to 2014 model years. Assembly took place at the Flat Rock Assembly Plant in Flat Rock, Michigan. The fifth generation began with the 2005 model year, and received a facelift for the 2010 model year.
The first-generation Ford Taurus and Mercury Sable are automobiles produced by Ford as the first of six generations of the Ford Taurus and Mercury Sable. Launched on December 26, 1985, as a 1986 model, the front-wheel-drive Taurus was a very influential design that is credited with saving Ford from bankruptcy, bringing many innovations to the marketplace and starting the trend towards aerodynamic design for the American automakers in the North American market. Ford of Europe had launched the 1980s move to aerodynamic design for the company with the 1982 Ford Sierra.
The second-generation Ford Taurus is an automobile that was produced by Ford from 1991 to 1995, which served as the second out of six generations of the Ford Taurus. The second-generation Taurus shared all of its mechanical parts with the first-generation Ford Taurus, yet its exterior and interior were nearly completely redesigned. However, its exterior still strongly resembled that of the first-generation Taurus, leading many to believe that the second-generation was simply a facelift of the first-generation Taurus. However, this is partially true because the wagon model, from the B-pillar to the rear of the car, was a carryover from the first generation. The second generation of Taurus proved to be very popular, selling 410,000 units in its first year, becoming the best-selling car in the United States. It would hold this title until 1995, when it was discontinued and replaced with the third-generation Ford Taurus.
The third-generation Ford Taurus is an automobile that was marketed by Ford from the 1996 to 1999 model years. While the chassis underpinnings were largely carried over, the redesign gave the Taurus its first complete exterior redesign since its 1986 introduction. Slotted between the compact Ford Contour and full-size Ford Crown Victoria, the third-generation Taurus was again offered as a four-door sedan and as a five-door station wagon, marketed alongside the Mercury Sable.
The sixth generation of the Ford Taurus is the final generation of the model range manufactured by Ford. Introduced for the 2010 model year, the sixth-generation Taurus is the second generation of the model line produced as a full-size car; it was the heaviest sedan sold under the Ford brand worldwide. While sharing its D3 chassis underpinnings with the previous generation, the sixth generation marked the first North American use of Kinetic Design design language.