Holomorphic function

Last updated

A rectangular grid (top) and its image under a conformal map f (bottom). Conformal map.svg
A rectangular grid (top) and its image under a conformal map f (bottom).

In mathematics, a holomorphic function is a complex-valued function of one or more complex variables that is complex differentiable in a neighbourhood of each point in a domain in complex coordinate space Cn. The existence of a complex derivative in a neighbourhood is a very strong condition: it implies that a holomorphic function is infinitely differentiable and locally equal to its own Taylor series (is analytic ). Holomorphic functions are the central objects of study in complex analysis.

Contents

Though the term analytic function is often used interchangeably with "holomorphic function", the word "analytic" is defined in a broader sense to denote any function (real, complex, or of more general type) that can be written as a convergent power series in a neighbourhood of each point in its domain. That all holomorphic functions are complex analytic functions, and vice versa, is a major theorem in complex analysis. [1]

Holomorphic functions are also sometimes referred to as regular functions. [2] A holomorphic function whose domain is the whole complex plane is called an entire function. The phrase "holomorphic at a point z0" means not just differentiable at z0, but differentiable everywhere within some neighbourhood of z0 in the complex plane.

Definition

The function f(z) = z is not complex differentiable at zero, because as shown above, the value of (f(z) - f(0)) / (z - 0) varies depending on the direction from which zero is approached. Along the real axis, f equals the function g(z) = z and the limit is 1, while along the imaginary axis, f equals h(z) = -z and the limit is -1. Other directions yield yet other limits. Non-holomorphic complex conjugate.svg
The function f(z) = z̅ is not complex differentiable at zero, because as shown above, the value of (f(z) − f(0)) / (z − 0) varies depending on the direction from which zero is approached. Along the real axis, f equals the function g(z) = z and the limit is 1, while along the imaginary axis, f equals h(z) = −z and the limit is −1. Other directions yield yet other limits.

Given a complex-valued function f of a single complex variable, the derivative of f at a point z0 in its domain is defined as the limit [3]

This is the same definition as for the derivative of a real function, except that all quantities are complex. In particular, the limit is taken as the complex number z tends to z0, and this means that the same value is obtained for any sequence of complex values for z that tends to z0. If the limit exists, f is said to be complex differentiable at z0. This concept of complex differentiability shares several properties with real differentiability: it is linear and obeys the product rule, quotient rule, and chain rule. [4]

A function is holomorphic on an open set U if it is complex differentiable at every point of U. A function f is holomorphic at a point z0 if it is holomorphic on some neighbourhood of z0. [5] A function is holomorphic on some non-open set A if it is holomorphic at every point of A.

A function may be complex differentiable at a point but not holomorphic at this point. For example, the function is complex differentiable at 0, but not complex differentiable elsewhere (see the Cauchy–Riemann equations, below). So, it is not holomorphic at 0.

The relationship between real differentiability and complex differentiability is the following: If a complex function f(x + iy) = u(x, y) + iv(x, y) is holomorphic, then u and v have first partial derivatives with respect to x and y, and satisfy the Cauchy–Riemann equations: [6]

or, equivalently, the Wirtinger derivative of f with respect to the complex conjugate of is zero: [7]

which is to say that, roughly, f is functionally independent from the complex conjugate of z.

If continuity is not given, the converse is not necessarily true. A simple converse is that if u and v have continuous first partial derivatives and satisfy the Cauchy–Riemann equations, then f is holomorphic. A more satisfying converse, which is much harder to prove, is the Looman–Menchoff theorem: if f is continuous, u and v have first partial derivatives (but not necessarily continuous), and they satisfy the Cauchy–Riemann equations, then f is holomorphic. [8]

Terminology

The term holomorphic was introduced in 1875 by Charles Briot and Jean-Claude Bouquet, two of Augustin-Louis Cauchy's students, and derives from the Greek ὅλος (hólos) meaning "whole", and μορφή (morphḗ) meaning "form" or "appearance" or "type", in contrast to the term meromorphic derived from μέρος (méros) meaning "part". A holomorphic function resembles an entire function ("whole") in a domain of the complex plane while a meromorphic function (defined to mean holomorphic except at certain isolated poles), resembles a rational fraction ("part") of entire functions in a domain of the complex plane. [9] Cauchy had instead used the term synectic. [10]

Today, the term "holomorphic function" is sometimes preferred to "analytic function". An important result in complex analysis is that every holomorphic function is complex analytic, a fact that does not follow obviously from the definitions. The term "analytic" is however also in wide use.

Properties

Because complex differentiation is linear and obeys the product, quotient, and chain rules, the sums, products and compositions of holomorphic functions are holomorphic, and the quotient of two holomorphic functions is holomorphic wherever the denominator is not zero. [11] That is, if functions f and g are holomorphic in a domain U, then so are f + g, fg, fg, and fg. Furthermore, f / g is holomorphic if g has no zeros in U, or is meromorphic otherwise.

If one identifies C with the real plane R2, then the holomorphic functions coincide with those functions of two real variables with continuous first derivatives which solve the Cauchy–Riemann equations, a set of two partial differential equations. [6]

Every holomorphic function can be separated into its real and imaginary parts f(x + iy) = u(x, y) + iv(x, y), and each of these is a harmonic function on R2 (each satisfies Laplace's equation 2u = ∇2v = 0), with v the harmonic conjugate of u. [12] Conversely, every harmonic function u(x, y) on a simply connected domain Ω ⊂ R2 is the real part of a holomorphic function: If v is the harmonic conjugate of u, unique up to a constant, then f(x + iy) = u(x, y) + iv(x, y) is holomorphic.

Cauchy's integral theorem implies that the contour integral of every holomorphic function along a loop vanishes: [13]

Here γ is a rectifiable path in a simply connected complex domain UC whose start point is equal to its end point, and f : UC is a holomorphic function.

Cauchy's integral formula states that every function holomorphic inside a disk is completely determined by its values on the disk's boundary. [13] Furthermore: Suppose UC is a complex domain, f : UC is a holomorphic function and the closed disk D = {z : |zz0|r} is completely contained in U. Let γ be the circle forming the boundary of D. Then for every a in the interior of D:

where the contour integral is taken counter-clockwise.

The derivative f(a) can be written as a contour integral [13] using Cauchy's differentiation formula:

for any simple loop positively winding once around a, and

for infinitesimal positive loops γ around a.

In regions where the first derivative is not zero, holomorphic functions are conformal: they preserve angles and the shape (but not size) of small figures. [14]

Every holomorphic function is analytic. That is, a holomorphic function f has derivatives of every order at each point a in its domain, and it coincides with its own Taylor series at a in a neighbourhood of a. In fact, f coincides with its Taylor series at a in any disk centred at that point and lying within the domain of the function.

From an algebraic point of view, the set of holomorphic functions on an open set is a commutative ring and a complex vector space. Additionally, the set of holomorphic functions in an open set U is an integral domain if and only if the open set U is connected. [7] In fact, it is a locally convex topological vector space, with the seminorms being the suprema on compact subsets.

From a geometric perspective, a function f is holomorphic at z0 if and only if its exterior derivative df in a neighbourhood U of z0 is equal to f(z)dz for some continuous function f. It follows from

that df is also proportional to dz, implying that the derivative f is itself holomorphic and thus that f is infinitely differentiable. Similarly, d(f dz) = fdzdz = 0 implies that any function f that is holomorphic on the simply connected region U is also integrable on U.

(For a path γ from z0 to z lying entirely in U, define in light of the Jordan curve theorem and the generalized Stokes' theorem, Fγ(z) is independent of the particular choice of path γ, and thus F(z) is a well-defined function on U having F(z0) = F0 and dF = f dz.)

Examples

All polynomial functions in z with complex coefficients are entire functions (holomorphic in the whole complex plane C), and so are the exponential function exp z and the trigonometric functions and (cf. Euler's formula). The principal branch of the complex logarithm function log z is holomorphic on the domain C {zR : z ≤ 0}. The square root function can be defined as and is therefore holomorphic wherever the logarithm log z is. The reciprocal function 1/z is holomorphic on C ∖ {0}. (The reciprocal function, and any other rational function, is meromorphic on C.)

As a consequence of the Cauchy–Riemann equations, any real-valued holomorphic function must be constant. Therefore, the absolute value |z|, the argument arg(z), the real part Re(z) and the imaginary part Im(z) are not holomorphic. Another typical example of a continuous function which is not holomorphic is the complex conjugate (The complex conjugate is antiholomorphic.)

Several variables

The definition of a holomorphic function generalizes to several complex variables in a straightforward way. A function in n complex variables is analytic at a point p if there exists a neighbourhood of p in which f is equal to a convergent power series in n complex variables; [15] the function f is holomorphic in an open subset U of Cn if it is analytic at each point in U. Osgood's lemma shows (using the multivariate Cauchy integral formula) that, for a continuous function f, this is equivalent to f being holomorphic in each variable separately (meaning that if any n − 1 coordinates are fixed, then the restriction of f is a holomorphic function of the remaining coordinate). The much deeper Hartogs' theorem proves that the continuity assumption is unnecessary: f is holomorphic if and only if it is holomorphic in each variable separately.

More generally, a function of several complex variables that is square integrable over every compact subset of its domain is analytic if and only if it satisfies the Cauchy–Riemann equations in the sense of distributions.

Functions of several complex variables are in some basic ways more complicated than functions of a single complex variable. For example, the region of convergence of a power series is not necessarily an open ball; these regions are logarithmically-convex Reinhardt domains, the simplest example of which is a polydisk. However, they also come with some fundamental restrictions. Unlike functions of a single complex variable, the possible domains on which there are holomorphic functions that cannot be extended to larger domains are highly limited. Such a set is called a domain of holomorphy.

A complex differential (p, 0)-form α is holomorphic if and only if its antiholomorphic Dolbeault derivative is zero: α = 0.

Extension to functional analysis

The concept of a holomorphic function can be extended to the infinite-dimensional spaces of functional analysis. For instance, the Fréchet or Gateaux derivative can be used to define a notion of a holomorphic function on a Banach space over the field of complex numbers.

See also

Related Research Articles

<span class="mw-page-title-main">Complex analysis</span> Branch of mathematics studying functions of a complex variable

Complex analysis, traditionally known as the theory of functions of a complex variable, is the branch of mathematical analysis that investigates functions of complex numbers. It is helpful in many branches of mathematics, including algebraic geometry, number theory, analytic combinatorics, and applied mathematics, as well as in physics, including the branches of hydrodynamics, thermodynamics, quantum mechanics, and twistor theory. By extension, use of complex analysis also has applications in engineering fields such as nuclear, aerospace, mechanical and electrical engineering.

<span class="mw-page-title-main">Cauchy–Riemann equations</span> Chacteristic property of holomorphic functions

In the field of complex analysis in mathematics, the Cauchy–Riemann equations, named after Augustin Cauchy and Bernhard Riemann, consist of a system of two partial differential equations which form a necessary and sufficient condition for a complex function of a complex variable to be complex differentiable.

<span class="mw-page-title-main">Riemann mapping theorem</span>

In complex analysis, the Riemann mapping theorem states that if is a non-empty simply connected open subset of the complex number plane which is not all of , then there exists a biholomorphic mapping from onto the open unit disk

In complex analysis, a branch of mathematics, the Casorati–Weierstrass theorem describes the behaviour of holomorphic functions near their essential singularities. It is named for Karl Theodor Wilhelm Weierstrass and Felice Casorati. In Russian literature it is called Sokhotski's theorem.

<span class="mw-page-title-main">Cauchy's integral theorem</span> Theorem in complex analysis

In mathematics, the Cauchy integral theorem in complex analysis, named after Augustin-Louis Cauchy, is an important statement about line integrals for holomorphic functions in the complex plane. Essentially, it says that if is holomorphic in a simply connected domain Ω, then for any simply closed contour in Ω, that contour integral is zero.

<span class="mw-page-title-main">Analytic function</span> Type of function in mathematics

In mathematics, an analytic function is a function that is locally given by a convergent power series. There exist both real analytic functions and complex analytic functions. Functions of each type are infinitely differentiable, but complex analytic functions exhibit properties that do not generally hold for real analytic functions. A function is analytic if and only if its Taylor series about converges to the function in some neighborhood for every in its domain. It is important to note that it is a neighborhood and not just at some point , since every differentiable function has at least a tangent line at every point, which is its Taylor series of order 1. So just having a polynomial expansion at singular points is not enough, and the Taylor series must also converge to the function on points adjacent to to be considered an analytic function. As a counterexample see the Weierstrass function or the Fabius function.

<span class="mw-page-title-main">Cauchy's integral formula</span> Provides integral formulas for all derivatives of a holomorphic function

In mathematics, Cauchy's integral formula, named after Augustin-Louis Cauchy, is a central statement in complex analysis. It expresses the fact that a holomorphic function defined on a disk is completely determined by its values on the boundary of the disk, and it provides integral formulas for all derivatives of a holomorphic function. Cauchy's formula shows that, in complex analysis, "differentiation is equivalent to integration": complex differentiation, like integration, behaves well under uniform limits – a result that does not hold in real analysis.

<span class="mw-page-title-main">Zeros and poles</span> Concept in complex analysis

In complex analysis, a pole is a certain type of singularity of a complex-valued function of a complex variable. It is the simplest type of non-removable singularity of such a function. Technically, a point z0 is a pole of a function f if it is a zero of the function 1/f and 1/f is holomorphic in some neighbourhood of z0.

The theory of functions of several complex variables is the branch of mathematics dealing with functions defined on the complex coordinate space , that is, n-tuples of complex numbers. The name of the field dealing with the properties of these functions is called several complex variables, which the Mathematics Subject Classification has as a top-level heading.

<span class="mw-page-title-main">Morera's theorem</span> Integral criterion for holomorphy

In complex analysis, a branch of mathematics, Morera's theorem, named after Giacinto Morera, gives an important criterion for proving that a function is holomorphic.

In the mathematical field of complex analysis, a branch point of a multi-valued function is a point such that if the function is n-valued at that point, all of its neighborhoods contain a point that has more than n values. Multi-valued functions are rigorously studied using Riemann surfaces, and the formal definition of branch points employs this concept.

In mathematics, the Schwarzian derivative is an operator similar to the derivative which is invariant under Möbius transformations. Thus, it occurs in the theory of the complex projective line, and in particular, in the theory of modular forms and hypergeometric functions. It plays an important role in the theory of univalent functions, conformal mapping and Teichmüller spaces. It is named after the German mathematician Hermann Schwarz.

In mathematics, a real-valued function defined on a connected open set is said to have a conjugate (function) if and only if they are respectively the real and imaginary parts of a holomorphic function of the complex variable That is, is conjugate to if is holomorphic on As a first consequence of the definition, they are both harmonic real-valued functions on . Moreover, the conjugate of if it exists, is unique up to an additive constant. Also, is conjugate to if and only if is conjugate to .

In mathematics, infinite-dimensional holomorphy is a branch of functional analysis. It is concerned with generalizations of the concept of holomorphic function to functions defined and taking values in complex Banach spaces, typically of infinite dimension. It is one aspect of nonlinear functional analysis.

In mathematics, with special application to complex analysis, a normal family is a pre-compact subset of the space of continuous functions. Informally, this means that the functions in the family are not widely spread out, but rather stick together in a somewhat "clustered" manner. Note that a compact family of continuous functions is automatically a normal family. Sometimes, if each function in a normal family F satisfies a particular property , then the property also holds for each limit point of the set F.

In mathematics, a function of a motor variable is a function with arguments and values in the split-complex number plane, much as functions of a complex variable involve ordinary complex numbers. William Kingdon Clifford coined the term motor for a kinematic operator in his "Preliminary Sketch of Biquaternions" (1873). He used split-complex numbers for scalars in his split-biquaternions. Motor variable is used here in place of split-complex variable for euphony and tradition.

<span class="mw-page-title-main">Antiderivative (complex analysis)</span> Concept in complex analysis

In complex analysis, a branch of mathematics, the antiderivative, or primitive, of a complex-valued function g is a function whose complex derivative is g. More precisely, given an open set in the complex plane and a function the antiderivative of is a function that satisfies .

In the mathematical field of complex analysis, the Looman–Menchoff theorem states that a continuous complex-valued function defined in an open set of the complex plane is holomorphic if and only if it satisfies the Cauchy–Riemann equations. It is thus a generalization of a theorem by Édouard Goursat, which instead of assuming the continuity of f, assumes its Fréchet differentiability when regarded as a function from a subset of R2 to R2.

In complex analysis of one and several complex variables, Wirtinger derivatives, named after Wilhelm Wirtinger who introduced them in 1927 in the course of his studies on the theory of functions of several complex variables, are partial differential operators of the first order which behave in a very similar manner to the ordinary derivatives with respect to one real variable, when applied to holomorphic functions, antiholomorphic functions or simply differentiable functions on complex domains. These operators permit the construction of a differential calculus for such functions that is entirely analogous to the ordinary differential calculus for functions of real variables.

In mathematics, a planar Riemann surface is a Riemann surface sharing the topological properties of a connected open subset of the Riemann sphere. They are characterized by the topological property that the complement of every closed Jordan curve in the Riemann surface has two connected components. An equivalent characterization is the differential geometric property that every closed differential 1-form of compact support is exact. Every simply connected Riemann surface is planar. The class of planar Riemann surfaces was studied by Koebe who proved in 1910, as a generalization of the uniformization theorem, that every such surface is conformally equivalent to either the Riemann sphere or the complex plane with slits parallel to the real axis removed.

References

  1. Analytic functions of one complex variable , Encyclopedia of Mathematics. (European Mathematical Society ft. Springer, 2015)
  2. "Analytic function", Encyclopedia of Mathematics , EMS Press, 2001 [1994], retrieved February 26, 2021
  3. Ahlfors, L., Complex Analysis, 3 ed. (McGraw-Hill, 1979).
  4. Henrici, P., Applied and Computational Complex Analysis (Wiley). [Three volumes: 1974, 1977, 1986.]
  5. Peter Ebenfelt, Norbert Hungerbühler, Joseph J. Kohn, Ngaiming Mok, Emil J. Straube (2011) Complex Analysis Springer Science & Business Media
  6. 1 2 Markushevich, A.I.,Theory of Functions of a Complex Variable (Prentice-Hall, 1965). [Three volumes.]
  7. 1 2 Gunning, Robert C.; Rossi, Hugo (1965). Analytic Functions of Several Complex Variables. Prentice-Hall series in Modern Analysis. Englewood Cliffs, N.J.: Prentice-Hall. pp. xiv+317. ISBN   9780821869536. MR   0180696. Zbl   0141.08601.
  8. Gray, J. D.; Morris, S. A. (1978), "When is a Function that Satisfies the Cauchy-Riemann Equations Analytic?", The American Mathematical Monthly (published April 1978), 85 (4): 246–256, doi:10.2307/2321164, JSTOR   2321164 .
  9. The original French terms were holomorphe and méromorphe. Briot, Charles Auguste; Bouquet, Jean-Claude (1875). "§15 fonctions holomorphes". Théorie des fonctions elliptiques (2nd ed.). Gauthier-Villars. pp. 14–15. Lorsqu'une fonction est continue, monotrope, et a une dérivée, quand la variable se meut dans une certaine partie du plan, nous dirons qu'elle est holomorphe dans cette partie du plan. Nous indiquons par cette dénomination qu'elle est semblable aux fonctions entières qui jouissent de ces propriétés dans toute l'étendue du plan. [...] ¶ Une fraction rationnelle admet comme pôles les racines du dénominateur; c'est une fonction holomorphe dans toute partie du plan qui ne contient aucun de ses pôles. ¶ Lorsqu'une fonction est holomorphe dans une partie du plan, excepté en certains pôles, nous dirons qu'elle est méromorphe dans cette partie du plan, c'est-à-dire semblable aux fractions rationnelles.[When a function is continuous, monotropic, and has a derivative, when the variable moves in a certain part of the plane, we say that it is holomorphic in that part of the plane. We mean by this name that it resembles entire functions which enjoy these properties in the full extent of the plane. [...] ¶ A rational fraction admits as poles the roots of the denominator; it is a holomorphic function in all that part of the plane which does not contain any poles. ¶ When a function is holomorphic in part of the plane, except at certain poles, we say that it is meromorphic in that part of the plane, that is to say it resembles rational fractions.]
    Harkness, James; Morley, Frank (1893). "5. Integration". A Treatise on the Theory of Functions. Macmillan. p. 161.
  10. Briot & Bouquet had previously also adopted Cauchy’s term synectic (synectique in French), in the 1859 first edition of their book. Briot, Charles Auguste; Bouquet, Jean-Claude (1875). "§10". Théorie des fonctions doublement périodiques. Mallet-Bachelier. p. 11.
  11. Henrici, Peter (1993) [1986], Applied and Computational Complex Analysis Volume 3, Wiley Classics Library (Reprint ed.), New York - Chichester - Brisbane - Toronto - Singapore: John Wiley & Sons, pp. X+637, ISBN   0-471-58986-1, MR   0822470, Zbl   1107.30300 .
  12. Evans, Lawrence C. (1998), Partial Differential Equations, American Mathematical Society.
  13. 1 2 3 Lang, Serge (2003), Complex Analysis, Springer Verlag GTM, Springer Verlag
  14. Rudin, Walter (1987), Real and complex analysis (3rd ed.), New York: McGraw–Hill Book Co., ISBN   978-0-07-054234-1, MR   0924157
  15. Gunning and Rossi, Analytic Functions of Several Complex Variables, p. 2.

Further reading