LNWR Class B

Last updated

LNWR Class B
LNWR locomotive No. 1881 B.jpg
No. 1881 (later LMS 8900) in photographic grey livery - classified B from 1911
Type and origin
Power typeSteam
Designer Francis Webb
Builder Crewe Works
Build date1901-1904
Total produced170
Specifications
Configuration:
   Whyte 0-8-0
   UIC D n4v
Gauge 4 ft 8+12 in (1,435 mm)
Driver dia.4 ft 5+12 in (1.359 m)
Loco weight53 long tons 10 cwt (119,800 lb or 54.4 t)
Fuel typecoal
Boiler pressure200 psi (1.38 MPa)
Cylinders 4, compound
High-pressure cylinder(2 outside) 15" x 24"
Low-pressure cylinder(2 inside) 20+12" x 24"
Career
Operators LNWR  » LMS
Disposition26 rebuilt to Class E 1904–08
10 rebuilt to Class F 1906–08
32 rebuilt to Class G 1906–17
91 rebuilt to Class G1 1917–27
11 scrapped 1921–28

The London and North Western Railway (LNWR) Class B was a class of 0-8-0 steam locomotives introduced in 1901. [1] A development of the three-cylinder compound Class A (though this letter classification was not introduced until 1911), they had a 4-cylinder compound arrangement. 170 were built between 1901 and 1904.

Contents

Rebuilds

Class E

Between 1904 and 1908, Webb's successor George Whale added a leading pony truck to 26 engines, making them 2-8-0s and taking them into Class E (again from 1911).

Class F

Between 1906 and 1908, Whale also rebuilt 10 with larger Experiment-type boiler to Class F, again adding a leading pony truck. (Two more of Class B were also converted to Class F via Class E).

Class G

Neither of the above conversions was particularly successful and, as a result, 32 were rebuilt to Class G with 2-cylinder simple expansion between 1910 and 1917.

Class G1

Whale's Successor Charles Bowen Cooke rebuilt a further 91 direct from Class B to 2-cylinder simple superheated LNWR Class G1 (also known as "Super Ds"). The rebuilds from Class B to Class G1 continued under LMS ownership between 1923 and 1927.

Summary

A total of 170 locomotives was built but No. 134 was destroyed in a boiler explosion at Buxton on 11 November 1921 leaving 169. The rebuilds (some under LMS ownership) totalled 159, leaving 10 unrebuilt.

LMS ownership

The London, Midland and Scottish Railway (LMS) inherited 53 unrebuilt Class B locomotives in 1923 and numbered them 8900–8952. The LMS continued to rebuild them to Class G1 and the number of unrebuilt locomotives dwindled to 10.

Withdrawal

The remaining 10 Class B locomotives were withdrawn in 1927–1928. None were preserved.

Related Research Articles

George Whale was an English locomotive engineer who was born in Bocking, Essex, and educated in Lewisham, London. He worked for the London and North Western Railway (LNWR).

<span class="mw-page-title-main">LMS Royal Scot Class</span>

The London, Midland and Scottish Railway (LMS) Royal Scot Class is a class of 4-6-0 express passenger locomotive introduced in 1927. Originally having parallel boilers, all members were later rebuilt with tapered type 2A boilers, and were in effect two classes.

Locomotives of the London and North Western Railway. The London and North Western Railway (LNWR) Locomotive Department was headquartered at Crewe from 1862. The Crewe Works had been built in 1840–43 by the Grand Junction Railway (GJR).

<span class="mw-page-title-main">L&YR Class 8</span>

The Lancashire and Yorkshire Railway (L&YR) Class 8 was a four-cylinder 4-6-0 express passenger locomotive designed by George Hughes introduced in 1908.

The Midland Railway Johnson 0-6-0 were a class of locomotives serving Britain's Midland Railway system in the late 19th and early 20th centuries. Between 1875 and 1908 the Midland Railway, under the control of locomotive superintendents Samuel Waite Johnson and Richard Deeley, ordered 935 goods tender engines of 0-6-0 type, both from the railway's own shops at Derby and various external suppliers. Although there were many variations between different batches both as delivered and as successively rebuilt, all 935 can be regarded as a single series, one of the largest classes of engine on Britain's railways. The locomotives served as late as 1964, but none of them now survive.

<span class="mw-page-title-main">LNWR Whale Precursor Class</span> Type of steam locomotive

The London and North Western Railway (LNWR) "Precursor" Class was a type of 4-4-0 ("American") steam locomotive designed by the company's Chief Mechanical Engineer, George Whale. Introduced in 1904, it should not be confused with the LNWR 2-4-0 "Precursor" Class of 1874 designed by Francis Webb, the last example of which was scrapped in 1895. In 1906, a 4-4-2T ("Atlantic") tank variant of Webb's engine, the "Precursor Tank" Class, also entered service.

<span class="mw-page-title-main">LNWR Claughton Class</span>

The London and North Western Railway (LNWR) Claughton Class was a class of 4-cylinder express passenger 4-6-0 steam locomotives.

<span class="mw-page-title-main">LNWR 19in Express Goods Class</span>

The London and North Western Railway (LNWR) 19in Express Goods Class, otherwise known as the Experiment Goods Class was a class of 4-6-0 steam locomotives. They were essentially a smaller wheeled version of the Whale's Experiment Class and were an early attempt at a mixed traffic engine.

<span class="mw-page-title-main">LNWR Jubilee Class</span>

The London and North Western Railway (LNWR) Jubilee Class was a class of 4-4-0 4-cylinder compound locomotives by F.W. Webb. A total of forty were built from 1897–1900.

<span class="mw-page-title-main">LNWR Alfred the Great Class</span>

The London and North Western Railway (LNWR) Alfred the Great class, after modification known as the Benbow Class was a class of 4-4-0 4-cylinder compound locomotives by F.W. Webb. A total of forty were built from 1901–1903. They were a development of the Jubilee Class, with a slightly larger boiler.

<span class="mw-page-title-main">LNWR Class A</span>

The London and North Western Railway (LNWR) Class A was a class of 0-8-0 steam locomotives. From 1893 to 1900, Crewe Works built 111 of these engines, which had a three-cylinder compound arrangement, and were designed by Francis Webb. According to the LNWR Society, 110 were built between 1894 and 1900.

<span class="mw-page-title-main">LNWR Class C</span>

The London and North Western Railway (LNWR) Class C was a class of 0-8-0 steam locomotives. They were two cylinder simple expansion rebuilds of the three-cylinder Class A designed by F.W. Webb. Fifteen Class As were converted to Class C between 1904 and 1906 by George Whale.

<span class="mw-page-title-main">LNWR Class C1</span>

The London and North Western Railway (LNWR) Class C1 was a class of 0-8-0 steam locomotives. 34 were rebuilt by Charles Bowen Cooke from Class A 3-cylinder compounds between 1909 and 1912.

<span class="mw-page-title-main">LNWR Class D</span>

The London and North Western Railway (LNWR) Class D was a class of 0-8-0 steam locomotives. They were simple engine rebuilds of earlier Webb Class A three-cylinder compound engines.

<span class="mw-page-title-main">LNWR Class E</span>

The London and North Western Railway (LNWR) Class E was a class of 2-8-0 steam locomotives in service between 1904 and 1928.

<span class="mw-page-title-main">LNWR Class F</span>

The London and North Western Railway (LNWR) Class F was a class of 2-8-0 steam locomotives in service between 1906 and 1928.

<span class="mw-page-title-main">LNWR Class G1</span> Class of two-cylinder 0–8-0 steam locomotives

The London and North Western Railway (LNWR) Class G1 was a class of 0-8-0 steam locomotives. It was a superheated version of the LNWR Class G with 8 inch piston valves. The prototype was rebuilt in 1912 from a member of Class G and a further 170 new locomotives were built between 1912 and 1918. In addition, 278 older locomotives were rebuilt to the G1 specification between 1917 and 1934.

<span class="mw-page-title-main">LNWR Class G2</span>

The London and North Western Railway (LNWR) Class G2 is a class of 0-8-0 steam locomotives. 60 were built at Crewe Works in 1921–1922. Uniquely amongst classes of LNWR 8-coupled tender engines, they were not rebuilt from or into other classes. Somewhat confusingly, the LNWR Class G2a is sometimes considered a subclass, but not in this article. They were classified by the London, Midland and Scottish Railway (LMS) as 5, from 1928 7F.

<span class="mw-page-title-main">LNWR Class G</span>

The London and North Western Railway (LNWR) Class G were several related classes of 0-8-0 steam locomotives. These 0-8-0s were the principal work-horses for freight traffic on the latter-day London & North Western.

<span class="mw-page-title-main">LNWR Class G2A</span>

The London and North Western Railway (LNWR) Class G2A was a class of 0-8-0 steam locomotives. They were upgraded from LNWR Class G1 principally by the fitting of a higher pressure boiler. Some of the G2As subsequently received lower pressure boilers on overhaul, taking them back into Class G1.

References

  1. LNWR Society. "Goods Engines of LNWR - 'B' class". Lnwrs.org.uk. Retrieved 9 April 2012.

Further reading