LNWR Webb Coal Tank

Last updated

LNWR Webb Coal Tank
LNWR Coal Tank engine No.848.jpg
No. 848 in photographic grey livery
Type and origin
Power typeSteam
Designer Francis Webb
Build date1881–1897 [1]
Total produced300
Specifications
Configuration:
   Whyte 0-6-2T
   UIC C1n2Gt
Gauge 4 ft 8+12 in (1,435 mm) standard gauge
Driver dia.4 ft 5+12 in (1.359 m)
Loco weight43 long tons 15 cwt (98,000 lb or 44.5 t)
Fuel type Coal
Boiler pressure150 psi (1.03 MPa)
SuperheaterNone
Cylinders Two, inside
Cylinder size 17 in × 24 in (432 mm × 610 mm)
Valve gear Stephenson
Valve type Slide valves
Performance figures
Tractive effort 16,530 lbf (73.5 kN)
Career
Operators LNWR  · LMS  · BR
Power class2F
Number in class1 January 1923: 292,
1 January 1948: 64
Withdrawn1921–1958
DispositionOne preserved, remainder scrapped.

The London and North Western Railway (LNWR) Webb Coal Tank is a class of 0-6-2T steam locomotive. They were called "Coal Tanks" because they were a side tank version of Webb's standard LNWR 17in Coal Engine, an 0-6-0 tender engine for slow freight trains.

Contents

Design

The design was introduced in 1881 by F.W. Webb and had the same cheaply produced cast iron wheels and H-section spokes as the tender engines. A trailing radial axle supporting the bunker was added also with two similarly cast iron wheels. Three hundred were built between 1881 and 1897.

Operational history

Four (LNWR nos. 178, 484, 1257, 69) were withdrawn in January–February 1920 [2] and a further four (LNWR nos. 142, 994, 782, 1012) in July and November 1922, [3] so at the 1923 grouping, 292 passed to the London Midland and Scottish Railway (LMS). They were renumbered from the LNWR's random allocation based on vacant numbers, to a solid block sequence 7550–7841, and given the power classification 1F. Many locomotives still in service in 1934 were renumbered by the addition of 20,000 to their number.

Sixty-four locomotives passed into British Railways ownership in January 1948 and they were numbered 58880–58937, but not all examples survived long enough to carry their BR numbers.

Preservation

The sole survivor at Dinting in 1982 London and North Western Railway Webb Coal Tank class locomotive number 1054.jpg
The sole survivor at Dinting in 1982
The surviving Coal Tank wearing LMS unlined 1920s livery as No. 7799 when visiting the Severn Valley Railway in September 2012 Rth Rly LMS LNWR 7799 SVR 22.09.12R edited-2.jpg
The surviving Coal Tank wearing LMS unlined 1920s livery as No. 7799 when visiting the Severn Valley Railway in September 2012

One Coal Tank number BR 58926, ex-LMS 7799, originally LNWR 1054, the 250th one built, has survived in preservation on the Keighley and Worth Valley Railway, normally carrying its LNWR livery and number. The locomotive is owned by the National Trust and is maintained and run by the Bahamas Locomotive Society. [4]

In February 2024, the National Trust handed ownership of 1054 to the Bahamas Locomotive Society and will remain based at Ingrow West on the Keighley and Worth Valley Railway. [5]

Models

Bachmann Branchline released a model of the coal tanks in 2017. The three variants released were: -LNWR Black 1054 (As preserved) -LMS Black 7841 -BR Black early emblem 58900 So far, these are the only variants in production with no other liveries announced. [6] [7]

Notes

  1. Baxter 1979, pp. 240, 247
  2. Baxter 1979 , pp. 243, 244, 246, 247
  3. Baxter 1979 , pp. 241, 244
  4. "LNWR Webb Coal Tank 1054". Keighley and Worth Valley Railway. 15 March 2019.
  5. "National Trust hands over Yorkshire based steam locomotive to society". RailAdvent. 15 February 2024.
  6. "Bachmann Coal Tank | Hornby Magazine". www.hornbymagazine.com. Archived from the original on 28 December 2016.
  7. "LNWR%20coal%20tank search from Hattons Model Railways".

Related Research Articles

<span class="mw-page-title-main">Steam locomotives of British Railways</span> Steam locomotives used under British Railways (1948 - 1968)

The steam locomotives of British Railways were used by British Railways over the period 1948–1968. The vast majority of these were inherited from its four constituent companies, the "Big Four".

<span class="mw-page-title-main">LMS Fairburn 2-6-4T</span>

The London, Midland and Scottish Railway (LMS) Fairburn Tank 2-6-4T is a class of steam locomotive. They were designed by Charles E. Fairburn for the LMS. 277 of these locomotives were built between 1945 and 1951, numbered in the range 42050–42186, (4)2187–(4)2299, (4)2673–(4)2699.

<span class="mw-page-title-main">LMS Ivatt Class 2 2-6-2T</span>

The London, Midland and Scottish Railway (LMS) Ivatt Class 2 2-6-2T is a class of light 'mixed-traffic' steam locomotive introduced in 1946.

Locomotives of the London and North Western Railway. The London and North Western Railway (LNWR) Locomotive Department was headquartered at Crewe from 1862. The Crewe Works had been built in 1840–43 by the Grand Junction Railway (GJR).

<span class="mw-page-title-main">Midland Railway 1377 Class</span>

The Midland Railway 1377 Class was a class of 185 0-6-0T tank locomotives. They were introduced in 1878 by Samuel W. Johnson, and were almost identical to the 1102 class of 1874; the latter having fully enclosed cabs, while the 1377 class were built without a rear to the cab and only a short cab roof, hence their nickname "half-cabs". They were given the power classification 1F.

<span class="mw-page-title-main">L&YR Class 5</span> Lancashire & Yorkshire Railway 2-4-2T passenger tank locomotive introduced in 1889

The Lancashire and Yorkshire Railway Class 5 were 2-4-2T steam locomotives designed by Chief Mechanical Engineer (CME) John Aspinall and introduced from 1889 for local passenger work. Later batches included progressive modifications such as extended coal bunkers and Belpaire fireboxes. The final batch built from 1911 to 1914 under George Hughes incorporating superheated boilers gave increased tractive effort, others were also rebuilt to this standard. When Hughes introduced his classification system in 1919, the more powerful superheated locomotives were designated Class 6. The final examples were withdrawn in 1961.

<span class="mw-page-title-main">Midland Railway 3835 Class</span>

The Midland Railway (MR) 3835 Class is a class of 0-6-0 steam locomotives designed for freight work. The first two were introduced in 1911 by Henry Fowler. After the grouping in 1923, the designs were slightly modified and continued to be built up to 1941 by the LMS as the LMS Fowler Class 4F.

LMS Jubilee Class 5596 <i>Bahamas</i>

London, Midland and Scottish Railway (LMS) Jubilee Class 5596Bahamas is a preserved British steam locomotive. It is named after The Bahamas.

<span class="mw-page-title-main">LNWR Improved Precedent Class</span>

The London and North Western Railway (LNWR) Improved Precedent Class or Renewed Precedent Class is a class of 2-4-0 steam locomotives originally designed for express passenger work. They later gained the nickname of Jumbos.

<span class="mw-page-title-main">LNWR 1185 Class</span>

The LNWR 1185 Class was a class of 0-8-2T steam tank locomotives designed by Charles Bowen-Cooke and introduced in 1911. They passed into LMS ownership in 1923 and 8 survived to British Railways ownership in 1948. British Railways numbers were 47875-47896.

<span class="mw-page-title-main">LNWR 380 Class</span> Class of locomotives, manufactured 1923–24

The LNWR 380 Class was a class of 0-8-4T steam tank locomotives designed by H. P. M. Beames. Although designed under the LNWR regime they appeared as LMS locomotives after the 1923 grouping. They were essentially an extended version of the 1185 Class 0-8-2T with a longer bunker, and were also related to the 0-8-0 freight engines. Their main area of work was to be in South Wales.

<span class="mw-page-title-main">Cleator and Workington Junction Railway</span> United Kingdom legislation

The Cleator and Workington Junction Railway (C&WJR) was located in West Cumberland in Northern England, serving the towns of Cleator Moor and Workington and intermediate villages. It was mainly used for coal, limestone and iron ore traffic for the local industries.

<span class="mw-page-title-main">LNWR Prince of Wales Class</span>

The London and North Western Railway (LNWR) Prince of Wales Class was a class of express passenger locomotive. It was in effect, a superheated version of the Experiment Class 4-6-0.

<span class="mw-page-title-main">LNWR George the Fifth Class</span> Class of 90 two-cylinder 4-4-0 passenger locomotives

The London and North Western Railway (LNWR) George the Fifth Class was a class of 4-4-0 passenger steam locomotive.

<span class="mw-page-title-main">LNWR Prince of Wales Tank Class</span>

The London and North Western Railway (LNWR) Prince of Wales Tank Class was a pacific tank engine version of the Prince of Wales Class 4-6-0 steam locomotive.

<span class="mw-page-title-main">LNWR Whale Precursor Class</span> Type of steam locomotive

The London and North Western Railway (LNWR) "Precursor" Class was a type of 4-4-0 ("American") steam locomotive designed by the company's Chief Mechanical Engineer, George Whale. Introduced in 1904, it should not be confused with the LNWR 2-4-0 "Precursor" Class of 1874 designed by Francis Webb, the last example of which was scrapped in 1895. In 1906, a 4-4-2T ("Atlantic") tank variant of Webb's engine, the "Precursor Tank" Class, also entered service.

<span class="mw-page-title-main">LNWR Precursor Tank Class</span>

The London and North Western Railway (LNWR) "Precursor Tank" Class was a type of 4-4-2 tank steam locomotive. Fifty were built to the design of George Whale between May 1906 and April 1909, being a tank engine version of his "Precursor" Class.

<span class="mw-page-title-main">LNWR Waterloo Class</span>

The London and North Western Railway (LNWR) Waterloo Class was a class of 2-4-0 steam locomotives that was also known as the Whitworth Class.

<span class="mw-page-title-main">LNWR 18in Goods Class</span>

The LNWR 18-inch Goods was a class of 310 0-6-0 freight steam locomotives built by the London and North Western Railway at their Crewe Works between 1880 and 1902.

<span class="mw-page-title-main">LNWR 5ft 6in Tank Class</span>

The LNWR 5ft 6in Tank was a class of 160 passenger 2-4-2T locomotives manufactured by the London and North Western Railway in their Crewe Works between 1890 and 1897. The "5ft 6in" in the title referred to the diameter of the driving wheels – although the stated dimension was for the wheel centres – the nominal diameter including the tyres was 5 ft 8+12 in (1,740 mm).

References