| LNWR 18-inch Goods (“Cauliflower”) | |||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 A photo of 1382 in photographic grey livery, as built. | |||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||
The LNWR 18-inch Goods was a class of 310 0-6-0 freight steam locomotives built by the London and North Western Railway at their Crewe Works between 1880 and 1902. [1]
They were also known officially as the Express Goods 5 ft 0in, and unofficially as the Crested Goods or Cauliflower Class, due to the application of the large LNWR crest on the middle splasher in the original livery. [2]
The design featured a boiler pressed to 150 lbf/in2 (1.03 MPa) delivering saturated steam to two 18 by 24 in (457 by 610 mm) cylinders connected by Joy valve gear to the driving wheels.
The dimensions quoted in the class title could be misleading: several locomotives ran for a period with 17-or-17+1⁄2-inch (432 or 444 mm) cylinders; and the “5ft 0in” referred to the diameter of the wheel centres – measured of the tyres the diameter was 5 ft 2+1⁄2 in (1,588 mm).
A tank locomotive version was also produced as the LNWR 18in Tank Class 0-6-2T.
Two locomotives were withdrawn before the 1923 Grouping, leaving 308 to pass to the London, Midland and Scottish Railway, who gave them power classification 2F, and renumbered them 8315–8624. The LMS later added them to the duplicate list by the addition of 20000 to their numbers to make room for additional Class 8F locomotives.
Sixty-nine locomotives entered British Railways (BR) stock in 1948. BR allocated them the numbers 58362–58430, as adding 40000 to their numbers as was done with most ex-LMS locomotives would have taken them into the 6xxxx ex-LNER series. The last one was withdrawn from British Railways service in 1955. None were preserved.
The Highland Railway's Clan Class was a class of passenger 4-6-0 steam locomotives designed by Christopher Cumming. The design is derived from that of the slightly earlier Clan Goods although the similarity is more visual than real. The first four were built in 1919, and the remaining four in 1921.
The London and North Western Railway (LNWR) Webb Coal Tank is a class of 0-6-2T steam locomotive. They were called "Coal Tanks" because they were a side tank version of Webb's standard LNWR 17in Coal Engine, an 0-6-0 tender engine for slow freight trains.
The L&YR Class 21 is a class of small 0-4-0ST steam locomotive built by the Lancashire and Yorkshire Railway for shunting duties. They were nicknamed Pugs.
The London and North Western Railway (LNWR) Improved Precedent Class or Renewed Precedent Class is a class of 2-4-0 steam locomotives originally designed for express passenger work. They later gained the nickname of Jumbos.
The LNWR 1185 Class was a class of 0-8-2T steam tank locomotives designed by Charles Bowen-Cooke and introduced in 1911. They passed into LMS ownership in 1923 and 8 survived to British Railways ownership in 1948. British Railways numbers were 47875-47896.
The LNWR 380 Class was a class of 0-8-4T steam tank locomotives designed by H. P. M. Beames. Although designed under the LNWR regime they appeared as LMS locomotives after the 1923 grouping. They were essentially an extended version of the 1185 Class 0-8-2T with a longer bunker, and were also related to the 0-8-0 freight engines. Their main area of work was to be in South Wales.
The London and North Western Railway (LNWR) Prince of Wales Class was a class of express passenger locomotive. It was in effect, a superheated version of the Experiment Class 4-6-0.
The London and North Western Railway (LNWR) George the Fifth Class was a class of 4-4-0 passenger steam locomotive.
The London and North Western Railway (LNWR) "Precursor" Class was a type of 4-4-0 ("American") steam locomotive designed by the company's Chief Mechanical Engineer, George Whale. Introduced in 1904, it should not be confused with the LNWR 2-4-0 "Precursor" Class of 1874 designed by Francis Webb, the last example of which was scrapped in 1895. In 1906, a 4-4-2T ("Atlantic") tank variant of Webb's engine, the "Precursor Tank" Class, also entered service.
The London and North Western Railway (LNWR) Experiment Class was a class of 4-6-0 steam locomotive designed by George Whale.
The LNWR 317 class, consisted of a class of 20 square saddle-tanked steam locomotives built by the London and North Western Railway at their Crewe Works between 1896 and 1901. They had a very short coupled wheelbase, with a trailing Bissel truck to carry weight.
The Midland Railway 1252 class was a class of thirty 0-4-4T locomotives built by Neilson and Company in 1875–1876 to the design of Samuel Waite Johnson. They were a development of the 6 Class. Originally numbers 1262–1281 and 1252–1261. Under the Midland Railway's 1907 renumbering scheme they became 1236–1265.
The London and North Western Railway (LNWR) Class C1 was a class of 0-8-0 steam locomotives. 34 were rebuilt by Charles Bowen Cooke from Class A 3-cylinder compounds between 1909 and 1912.
The London and North Western Railway (LNWR) Class E was a class of 2-8-0 steam locomotives in service between 1904 and 1928.
The London and North Western Railway (LNWR) DX Goods class was a class of 0-6-0 steam locomotive, designed by John Ramsbottom for freight duties. 943 were constructed, making them the largest single class of steam locomotives built in the United Kingdom. Despite this, none were preserved.
The LNWR 4ft 6in Tank was a class of 220 passenger 2-4-2T locomotives manufactured by the London and North Western Railway in their Crewe Works between 1879 and 1898. The "4ft 6in" in the title referred to the diameter of the driving wheels – although the stated dimension was for the wheel centres – the nominal diameter including the tyres was 4 ft 8+1⁄2 in (1,435 mm).
The Midland Railway 1532 class was a class of 65 0-4-4T locomotives built by Derby Works between 1881 and 1886 to the design of Samuel W. Johnson. They were a development of the 1252 class. Originally numbered 1532–1551, 1632–1656, and 1718–1737; under the 1907 renumbering scheme they became 1266–1330, and were given the power classification 1P.
The LNWR 18-inch Tank class was a class of 80 0-6-2T locomotives built by the London and North Western Railway in their Crewe Works between 1898 and 1902.
The LNWR 5ft 6in Tank was a class of 160 passenger 2-4-2T locomotives manufactured by the London and North Western Railway in their Crewe Works between 1890 and 1897. The "5ft 6in" in the title referred to the diameter of the driving wheels – although the stated dimension was for the wheel centres – the nominal diameter including the tyres was 5 ft 8+1⁄2 in (1,740 mm).
The LNWR Newton Class was a class of ninety-six 2-4-0 steam locomotives built by the London and North Western Railway at their Crewe Works between 1866 and 1873.
 | This article relating to steam locomotives operated in the United Kingdom is a stub. You can help Wikipedia by expanding it. |