Marking axe

Last updated
A Norwegian timber marking axe from the 1960s. Blinkeoks.JPG
A Norwegian timber marking axe from the 1960s.
A marking axe being used by a forestry officer Marking a Tree - 1939 (5376159034).jpg
A marking axe being used by a forestry officer

Marking axe or marking hatchet is a small hatchet which is used by forest workers to mark trees designated for logging or for thinning. These axes were used also for trail blazing or for marking the ends of the felled logs for identification of the owner (stamping axe).

Contents

Usage

A hole in the bark is first cut with the axe and then the hammer part was hit on the spot and a raised die on the head would create a stamp on the mark. The hammer would create a recognizable marking to show the owner or buyer of the tree. After marking all the trees on a stand it would be ready for cutting. Felled logs could be marked also with a log marking hammer which was used on the end of the logs. [1] [2] Nowadays the marks on standing trees are done usually with paint. [3] [4]

Related Research Articles

<span class="mw-page-title-main">Lumberjack</span> Worker who performs the initial harvesting of trees

Lumberjacks are mostly North American workers in the logging industry who perform the initial harvesting and transport of trees for ultimate processing into forest products. The term usually refers to loggers in the era when trees were felled using hand tools and dragged by oxen to rivers. The work was difficult, dangerous, intermittent, low-paying, and involved living in primitive conditions. However, the men built a traditional culture that celebrated strength, masculinity, confrontation with danger, and resistance to modernization.

<span class="mw-page-title-main">Hewing</span> Method for converting a log into lumber

In woodworking, hewing is the process of converting a log from its rounded natural form into lumber (timber) with more or less flat surfaces using primarily an axe. It is an ancient method, and before the advent of the industrial-era type of sawmills, it was a standard way of squaring up wooden beams for timber framing. Today it is still used occasionally for that purpose by anyone who has logs, needs beams, and cannot or would prefer not to pay for finished lumber. Thus, homesteaders on frugal budgets, for example, may hew their own lumber rather than buy it.

<span class="mw-page-title-main">Tomahawk</span> Axe from North America

A tomahawk is a type of single-handed axe used by the many Indigenous peoples and nations of North America. It traditionally resembles a hatchet with a straight shaft. In pre-colonial times the head was made of stone, bone, or antler, and European settlers later introduced heads of iron and steel. The term came into the English language in the 17th century as an adaptation of the Powhatan word.

<span class="mw-page-title-main">Sawmill</span> Facility where logs are cut into lumber

A sawmill or lumber mill is a facility where logs are cut into lumber. Modern sawmills use a motorized saw to cut logs lengthwise to make long pieces, and crosswise to length depending on standard or custom sizes. The "portable" sawmill is of simple operation. The log lies flat on a steel bed, and the motorized saw cuts the log horizontally along the length of the bed, by the operator manually pushing the saw. The most basic kind of sawmill consists of a chainsaw and a customized jig, with similar horizontal operation.

<span class="mw-page-title-main">Hatchet</span> Single-handed striking tool

A hatchet is a single-handed striking tool with a sharp blade on one side used to cut and split wood, and a hammerhead on the other side. Hatchets may also be used for hewing when making flattened surfaces on logs; when the hatchet head is optimized for this purpose it is called a hewing hatchet.

<span class="mw-page-title-main">Broad arrow</span> Symbol

A broad arrow, of which a pheon is a variant, is a stylised representation of a metal arrowhead, comprising a tang and two barbs meeting at a point. It is a symbol used traditionally in heraldry, most notably in England, and later by the British government to mark government property. It became particularly associated with the Board of Ordnance, and later the War Department and the Ministry of Defence. It was exported to other parts of the British Empire, where it was used in similar official contexts.

<span class="mw-page-title-main">Crosscut saw</span> Type of saw optimized for cutting across wood fibres

A crosscut saw is any saw designed for cutting wood perpendicular to (across) the wood grain. Crosscut saws may be small or large, with small teeth close together for fine work like woodworking or large for coarse work like log bucking, and can be a hand tool or power tool.

<span class="mw-page-title-main">Froe</span> Tool for cleaving wood

A froe, shake axe or paling knife is a tool for cleaving wood by splitting it along the grain. It is an L-shaped tool, used by hammering one edge of its blade into the end of a piece of wood in the direction of the grain, then twisting the blade in the wood by rotating the haft (handle).

<span class="mw-page-title-main">Two-man saw</span>

A two-man saw is a saw designed for use by two sawyers. While some modern chainsaws are so large that they require two persons to control, two-man crosscut saws were primarily important when human power was used. Such a saw would typically be 1 to 4 m long, and sometimes up to 5 m, with a handle at each end. In some cases, such as when felling Giant Sequoias, sawblades could be brazed together end-to-end in order to create longer saws.

<span class="mw-page-title-main">Trail blazing</span> Practice of marking footpaths by leaving signs that indicate the route

Trail blazing or way marking is the practice of marking paths in outdoor recreational areas with signs or markings that follow each other at certain, though not necessarily exactly defined, distances and mark the direction of the trail.

<span class="mw-page-title-main">Shepherd's axe</span> Axe-like weapon use by shepherds

The shepherd's axe is a long thin light axe of Eurasian origin used in past centuries by shepherds in the Carpathian Mountains and in other territories which comprise today Slovakia, Czech Republic, Poland, Ukraine, Romania and Hungary. The features of a shepherd's axe combine a tool with a walking stick, that could be used as a light weapon. It has symbolic historical and cultural connotations and is still used as a prop in many traditional dances, for example the odzemek.

The following outline is provided as an overview of and guide to forestry:

<span class="mw-page-title-main">Felling</span> Process of cutting down trees

Felling is the process of cutting down trees, an element of the task of logging. The person cutting the trees is a feller. A feller buncher is a machine capable of felling a single large tree or grouping and felling several small ones simultaneously.

Underwater logging is the process of logging trees from underwater forests. When artificial reservoirs and dams are built, large areas of forest are often inundated; although the trees die, the wood is often preserved. The trees can then be felled using special underwater machinery and floated up to the surface. One such machine is the sawfish harvester. There is an ongoing debate to determine whether or not underwater logging is a sustainable practice and if it is more environmentally sustainable than traditional logging.

<i>Ax Men</i> TV show about loggers

Ax Men is an American reality television series that premiered on March 9, 2008 on History. The program follows the work of several logging crews in the second-growth forests of Northwestern Oregon, Washington and Montana and the rivers of Louisiana and Florida. The show highlights the dangers encountered by the loggers. Following in the footsteps of other shows from Original Productions, like Deadliest Catch and Ice Road Truckers, the series is considered part of a recent "real-men-in-real-danger" television programming trend.

<span class="mw-page-title-main">Axe</span> Type of wedge tool

An axe is an implement that has been used for millennia to shape, split and cut wood, to harvest timber, as a weapon, and as a ceremonial or heraldic symbol. The axe has many forms and specialised uses but generally consists of an axe head with a handle, or helve.

<span class="mw-page-title-main">Cleaving axe</span>

A cleaving axe or cleaver is a form of axe used within green woodworking to split wood lengthways. Cleaving (riving) is used to turn a log into lumber or billets into firewood. Splitting axe is sometimes described as an old name for a splitting maul or froe.

<span class="mw-page-title-main">Carpenter's axe</span>

Carpenter's axes or Carpenter's hatchets are small axes, usually slightly larger than a hatchet, used in traditional woodwork, joinery and log-building. They have pronounced beards and finger notches to allow a "choked" grip for precise control.

<i>Bosko the Lumberjack</i> 1932 film

Bosko the Lumberjack is an American animated short film, released September 3, 1932, though one source gives only an ambiguous release date of 1931–1932. It is a Looney Tunes cartoon, featuring Bosko, the original star of the series. Like most Looney Tunes of its day, it was directed by Hugh Harman; its musical direction was by Frank Marsales.

References

  1. Log-marking hammer (Wisconsin 101) Our history in objects
  2. Nummerierschlägel (Faszination "Altes Werkzeug" - Markierwerkzeuge / Forst)
  3. Timber marking (Veon Ltd)
  4. An introduction to Tree Marking by Tommy Lutz (Published by the Medway Community Forest Cooperative)