The NZR A class of 1873 consisted of three types of steam locomotives used on New Zealand's railway network of similar specification but differing detail. The first and most numerous were from the Dübs and Company, the next from the Wellington firm E.W. Mills Lion Foundry, and the last from the Scottish firm of Shanks. The specifications are for the Dubs Yorkshire engines.
The NZR WD class was a class of tank locomotive built by Baldwin Locomotive Works to operate on New Zealand's national rail network.
The NZR O class consisted of six steam locomotives that operated on New Zealand's national rail network. Ordered from the Baldwin Locomotive Works of Pennsylvania in 1885, three arrived in time to begin work in December 1885, while two more were placed in service in January 1886 and the sixth in February 1886. After almost four decades of service, all six were withdrawn in May 1922. None survived to be preserved, although two engine frames and 5 tenders from O class locomotives are known to exist near Summit on the former Rimutaka Incline.
The N class were 12 steam locomotives that operated on the national rail network of New Zealand. They were built in three batches, including one batch of two engines for the private Wellington and Manawatu Railway Company, the WMR, by the Baldwin Locomotive Works in 1885, 1891, and 1901. Previously the N class designation had been applied between 1877 and 1879 to Lady Mordaunt, a member of the B class of 1874.
The NZR NA class was a class of two steam locomotives that operated on the privately owned Wellington and Manawatu Railway (WMR) and then the publicly owned New Zealand Railways (NZR). Ordered by the WMR to operate on its line up the west coast of the North Island north of Wellington, the first was built in 1894 by the Baldwin Locomotive Works and entered service that year as WMR No. 14. In 1896, a second locomotive that was slightly more powerful was ordered from Baldwin, and it entered service in October 1897. The engines were similar to the two members of the N class ordered in 1891, except they were heavier and more powerful. They were Vauclain compound locomotives.
The NZR NC class was a class of two steam locomotives built by Baldwin Locomotive Works built for service on New Zealand's private Wellington and Manawatu Railway (WMR). They did not acquire their NC classification until the publicly owned New Zealand Railways Department (NZR) purchased the WMR and its locomotive fleet.
The OB class was the first class of steam locomotives constructed by the Baldwin Locomotive Works for the Wellington and Manawatu Railway Company (WMR) in New Zealand. The class consisted of two locomotives ordered in 1888, and they entered service in September of that year as WMR No.'s 11 and 12.
The OC class, built by the Baldwin Locomotive Works for the Wellington and Manawatu Railway (WMR) in New Zealand, consists of a solitary steam locomotive. Ordered in 1896 as an externally similar but more powerful version of the OA class locomotive ordered in 1894, it entered service in June 1897 as No. 16. It was a Vauclain compound locomotive.
The New Zealand E class locomotive comprised a single Mallet steam locomotive operated by New Zealand Railways (NZR) from 1906 until 1917. Classified as E 66 and nicknamed Pearson's Dream after its designer, it was an experimental Mallet locomotive designed to work on the Rimutaka Incline. The "E" classification was previously used by the Double Fairlie E class of 1872-75, but the classification was free as they had all been withdrawn by the time E 66 entered service. After the withdrawal of E 66, "E" was again re-used on the battery-electric E class of 1922. It was the only Mallet locomotive to operate for the NZR
The NZR P class was a class of two 0-6-0ST locomotives built to work on the government-owned national rail network of New Zealand in 1876. They were initially ordered by the Otago Provincial Council, but they were soon incorporated into the national locomotive fleet when the provinces were abolished. Other examples of the P class were built for industrial service and never came under the ownership of the New Zealand Railways Department, though one worked on the Kaitangata Line.
The NZR B class of 1874 was the first of two steam locomotive classes to be designated as B by the Railways Department that then oversaw New Zealand's national rail network. Ordered from the Avonside Engine Company in 1874, the locomotives were of the Double Fairlie type and were the first British-built locomotives to feature Walschaerts valve gear. They were not the first Double Fairlies to operate in New Zealand, as the first two members of the E class had commenced operations in 1872.
The NZR BB class of steam locomotives comprised 30 engines operated by the New Zealand Railways (NZR) in the North Island of New Zealand. Ordered to replace smaller locomotives of several classes in the North Island, they were similar in design and appearance to the preceding B and BA classes. The first BB class locomotive entered service in February 1915, with the last to commence operations doing so on 8 March 1917. All were built by A & G Price Ltd of Thames, New Zealand, and as their cylinders had a larger diameter than the B and BA locomotives they were capable of generating more power to haul heavier trains. The most visible difference however was the roundtop firebox in place of the preceding classes Belpaire design. The BB class could haul up to 700 long tons of freight on a level railway line, though they were limited to a top speed of around 40 mph (64 km/h).
The BC class comprised a single steam locomotive that operated on New Zealand's national rail network. Built for the Wellington and Manawatu Railway (WMR) and classified as No. 17, it passed into the ownership of the New Zealand Railways Department (NZR) when the government purchased the WMR in December 1908, and it was then that it acquired the BC classification as BC 463.
The NZR LA class was a class of 4-4-0T steam locomotives used by the New Zealand Railways Department and the New Zealand Midland Railway Company. They were built by Nasmyth, Wilson and Company in 1887 for New Zealand Midland Railway Company, and were taken over by NZR in 1900, when the government acquired the incomplete Midland line. The designation also applies to the NZR 4-4-0Trebuilds of the Avonside L class of 1875 which were later reclassified LB after being rebuilt as 4-4-2Ts.
The NZR Q class was an important steam locomotive class not only in the history of New Zealand's railway network but also in worldwide railways in general. Designed by New Zealand Government Railways' (NZR) Chief Mechanical Engineer A. L. Beattie and ordered from the Baldwin Locomotive Works in 1901, they were the first locomotives in the world to be built with the wheel arrangement of 4-6-2. This wheel arrangement came to be known as the Pacific type after the voyage the completed locomotives had to make across the Pacific Ocean to New Zealand. A few instances of the 4-6-2 wheel arrangement are known to have existed prior to 1901, but these were all reconstructions of locomotives that were originally built with a different wheel arrangement, thereby making the thirteen members of the Q class the first "true" Pacifics in the world. The Pacific style went on to become arguably the most famous wheel arrangement in the world.
The New Zealand V class steam locomotive was used on New Zealand's railway network from 1885 onwards. They were operated by New Zealand Government Railways and the Wellington and Manawatu Railway Company.
The NZR WJ class was a class of one steam locomotive built by Baldwin Locomotive Works for service on New Zealand's private Wellington and Manawatu Railway (WMR). She acquired the WJ classification when the publicly owned New Zealand Railways Department (NZR) purchased the WMR and its locomotive fleet in 1908.
The NZR WA class locomotives were a class of tank locomotive built by New Zealand Railways (NZR). Eleven were built at NZR's own Addington Workshops in Christchurch and Hillside Workshops in Dunedin. Four more were converted from old J class 2-6-0 locomotives.
The NZR G Class was a class of four saddle tank locomotives from English builders Black Hawthorn in the early 1870s. Like the similarly sized D class, they were an attempt to produce a passenger version of the already highly successful F class.
The NZR WG class was a development of the preceding WF class of all purpose tank locomotive. Later in their careers most (14) were rebuilt as WW class. The locomotives were designed by A. L. Beattie, who described them as a "large tank locomotive."
