New Zealand EB class locomotive

Last updated

New Zealand EB class locomotive
Eb class battery locomotive NZ.jpg
AP Godber Collection, Alexander Turnbull Library, Wellington
Type and origin
Power typeBattery electric,
later diesel electric
BuilderGoodman Manufacturing Company (1), and NZR (4)
Specifications
Configuration:
   UIC Bo
Gauge 1,067 mm (3 ft 6 in)
Length6.2 m (20 ft 4 in)
Loco weight12 long tons (13.4 short tons; 12.2 t)
Rebuilt 14 long tons (15.7 short tons; 14.2 t)
Prime mover AEC Comet Mark III
Performance figures
Maximum speed20 km/h (12 mph)
Power output23 kW (31 hp)
Rebuilt 48 kW (64 hp)
Career
Operators New Zealand Railways
Number in class5
NumbersOriginal: 25 – 29
TMS: 1809, 1815, 1821 (two did not receive TMS numbers)
LocaleFrankton, Hutt, Hillside,Addington, and Otahuhu.
First run1925, 1929
Rebuilt 1953

The New Zealand EB class locomotive [nb 1] was a class of five battery electric (later diesel-electric) locomotives built to perform shunting duties at the workshops of New Zealand's national rail network.

Contents

Introduction

The first (later No. 29) was built in 1925 in the United States, and began its working life at Hamilton railway station in Frankton; then four years later it was transferred to Christchurch's Addington Workshops. That same year, four more were built at Hutt Workshops (No's 25 and 26) and Hillside Workshops (No's 27 and 28); they were stationed at main workshops around the country. [1]

Conversion

New batteries were required in 1937, and although conversion into diesel-electric locomotives was proposed, rebuilding was not undertaken until the early 1950s. In their new guise, the locomotives survived well into the 1970s.

Withdrawal

The first to be withdrawn was EB 27 in 1976, and two years later, the class leader, EB 25, was also removed from service. It has been preserved by Auckland's Museum of Transport and Technology. The other three locomotives survived long enough to receive TMS numbers – EB 26 became EB 1809, EB 28 became EB 1815, and EB 29 became EB 1821. The latter two were withdrawn in 1980, but EB1809, now stationed in Napier, was reclassified as a member of the TR class, TR1003. After it was withdrawn, it was saved for preservation and is now serviceable at the Silver Stream Railway.

See also

Related Research Articles

<span class="mw-page-title-main">NZR A class (1906)</span>

The NZR A class were a class of steam locomotives built in 1906 with a 4-6-2 wheel arrangement for the New Zealand Railways Department (NZR). The class should not be confused with the older and more obscure A class of 1873. They were designed by the NZR's Chief Mechanical Engineer, A. L. Beattie and his Chief Draughtsman, G. A. Pearson to replace less powerful locomotives struggling with increasing loads on the South Island Main Trunk Railway, and in anticipation of the traffic volumes that would be created upon the completion of the North Island Main Trunk railway.

Locomotives of New Zealand is a complete list of all locomotive classes that operate or have operated in New Zealand's railway network. It does not include locomotives used on bush tramways.

<span class="mw-page-title-main">New Zealand DJ class locomotive</span>

The New Zealand DJ class locomotive is a type of diesel-electric locomotive in service on the New Zealand rail network. The class were built by Mitsubishi Heavy Industries and introduced from 1968 to 1969 for the New Zealand Railways Department (NZR) with a modernisation loan from the World Bank to replace steam locomotives in the South Island, where all of the class members worked most of their lives. Nine of the locomotives remain in use, mainly with Dunedin Railways.

<span class="mw-page-title-main">NZR E class (1906)</span>

The New Zealand E class locomotive comprised a single Mallet steam locomotive operated by New Zealand Railways (NZR) from 1906 until 1917. Classified as E 66 and nicknamed Pearson's Dream after its designer, it was an experimental Mallet locomotive designed to work on the Rimutaka Incline. The "E" classification was previously used by the Double Fairlie E class of 1872-75, but the classification was free as they had all been withdrawn by the time E 66 entered service. After the withdrawal of E 66, "E" was again re-used on the battery-electric E class of 1922. It was the only Mallet locomotive to operate for the NZR

<span class="mw-page-title-main">NZR C class (1930)</span>

The NZR C class consisted of twenty-four steam locomotives built to perform shunting duties on New Zealand's national rail network. It is sometimes known as the big C class to differentiate it from the C class of 1873.

<span class="mw-page-title-main">New Zealand DI class locomotive</span>

The New Zealand DI class locomotive was a class of diesel-electric locomotive in New Zealand. They were built by English Electric at their plant in Rocklea, Queensland in Australia. The class is very similar to the Queensland Railways 1620 class locomotives. At the time of their introduction, the class was seen as an alternative to the DB class for use on lightly laid secondary and branch lines, more so in the South Island. The World Bank financed introduction of the Japanese built DJ class in 1968, which ensured that no further DI class locomotives were purchased by New Zealand Railways.

<span class="mw-page-title-main">New Zealand Railways Department</span> Government agency (1880–1982)

The New Zealand Railways Department, NZR or NZGR and often known as the "Railways", was a government department charged with owning and maintaining New Zealand's railway infrastructure and operating the railway system. The Department was created in 1880 and was corporatised on 1 April 1982 into the New Zealand Railways Corporation. Originally, railway construction and operation took place under the auspices of the former provincial governments and some private railways, before all of the provincial operations came under the central Public Works Department. The role of operating the rail network was subsequently separated from that of the network's construction. From 1895 to 1993 there was a responsible Minister, the Minister of Railways. He was often also the Minister of Public Works.

<span class="mw-page-title-main">New Zealand EW class locomotive</span>

The New Zealand EW class locomotive was a type of electric locomotive used in Wellington, New Zealand. The classification "EW" was due to their being electric locomotives allocated to Wellington. For two decades until the advent of the DX class they were the most powerful locomotives in New Zealand.

<span class="mw-page-title-main">NZR K class (1932)</span>

The NZR K class of 1932 was a class of mixed traffic 4-8-4 steam locomotives built by the New Zealand Railways Department (NZR) that operated on New Zealand's railway network. The locomotives were developed following the failure of the G class Garratt locomotives. The class should not be confused with the much earlier K class of 1877-78, the first American-built engines to arrive in New Zealand.

<span class="mw-page-title-main">New Zealand DA class locomotive</span>

The New Zealand DA class locomotive were a class of diesel-electric mainline locomotives operated on the New Zealand railway system between 1955 and 1989. Consisting of 146 locomotives, it was the most numerous class to ever operate in New Zealand, with five more than the AB class steam locomotive.

<span class="mw-page-title-main">New Zealand DB class locomotive</span>

The New Zealand DB class and DBR class locomotive is a type of diesel-electric locomotive built for service on New Zealand's rail network. They were built by General Motors Diesel (GMD) of Canada as a narrow-gauge version of the EMD G8 model, with seventeen locomotives constructed. Ten of these were later rebuilt into the DBR class.

<span class="mw-page-title-main">New Zealand DE class locomotive</span>

The New Zealand DE class was a class of fifteen diesel-electric shunting locomotives, introduced by the New Zealand Railways (NZR) with an intention to replace steam locomotives on shunting duties with diesel power. The class was physically similar to the Tasmanian Government Railways X class, which was also of English Electric design.

<span class="mw-page-title-main">New Zealand DSC class locomotive</span> Heavy shunting locomotive

The New Zealand DSC class locomotive is a heavy shunting locomotive used throughout New Zealand. The class was built in seven batches, the first 18 locomotives being built by British Thomson-Houston of the United Kingdom, with the remainder being built by New Zealand Railways (NZR).

<span class="mw-page-title-main">New Zealand TR class locomotive</span>

The New Zealand TR class locomotive is a type of diesel shunting locomotives built by many different manufacturers. Defined as "shunting tractors" or "rail tractors" by KiwiRail and its predecessors, they are classified "TR" for tractor as a result. Many of these locomotives have been withdrawn, but some are still in service. The first locomotive of this class was built by NZR in 1924. The most powerful were Japanese-built Hitachi TRs, with 138 kW Cummins engines.

<span class="mw-page-title-main">New Zealand EA class locomotive</span>

The New Zealand EA class of electric locomotives were used on the New Zealand rail network between 1968 and 1997 on the Otira – Arthur's Pass section of the Midland line in the South Island, through the Otira Tunnel. Following reconditioning, three were used by KiwiRail's Tranz Metro in Wellington from 2008 to 2011 to top and tail Metlink suburban passenger trains as an interim measure before new rolling stock arrived. Four of the five locomotives were scrapped in 2013 with one being set aside for preservation.

<span class="mw-page-title-main">NZR ED class</span>

The NZR ED class locomotive was a type of electric locomotive used in Wellington, New Zealand. They were built by English Electric and the New Zealand Railways Department (NZR) between 1938 and 1940, and hauled mainly passenger trains on the Wellington region's 1500 V DC electrification, and banked freight trains on the steep section between Paekākāriki and Pukerua Bay.

The NZR DS class locomotive is a type of 16 diesel shunting locomotives built by the Vulcan Foundry and supplied by the Drewry Car Co from 1949–1955, for New Zealand Railways (NZR).

<span class="mw-page-title-main">NZR DSA class</span>

The NZR DSA class locomotive was a type of 0-6-0DM diesel-mechanical locomotives built by three different manufacturers: W. G. Bagnall, Hunslet, Mitsubishi Heavy Industries, and Vulcan Foundry for the Drewry Car Co. They were built between 1953 and 1967.

The NZR DSB class locomotive is a type of shunting locomotive introduced to New Zealand's national rail network in 1954 by New Zealand Railways (NZR).

NZR W<sup>W</sup> class Class of 50 (+14) New Zealand 4-6-4T locomotives

The New Zealand WW class was a class of 4-6-4T tank locomotives that operated on the New Zealand national railway network. They were built for New Zealand Railways Department (NZR), and were the final development of the six-coupled tank engine in New Zealand, the penultimate class of tank locomotives to be built for NZR, and the first class of tank locomotives to be built with superheaters.

References

Footnotes

  1. Following the introduction of TMS in 1979, the class classification was capitalised, whereas previously the second letter was a smaller capital letter, that is EB

Citations

Bibliography

  • Palmer, A. N.; Stewart, W. W. (1965). Cavalcade of New Zealand Locomotives. Wellington: A H. & A W. Reed. ISBN   978-0-207-94500-7.