NZR KB class

Last updated

NZR KB class
Kb class steam locomotive, New Zealand Railways no 969, 4-8-4 type ATLIB 277647.png
KB class 4-8-4 steam locomotive, NZR number 969, c. 1940 at Hillside Workshops in Dunedin. [1] Godber Collection, Alexander Turnbull Library.
Type and origin
Power typeSteam
Builder NZR Hillside Workshops, Dunedin
Build date1939
Specifications
Configuration:
   Whyte 4-8-4
Gauge 3 ft 6 in (1,067 mm)
Wheel diameter54 in (1.372 m)
Wheelbase 34 ft 10 in (10.62 m)
Length69 ft 8 in (21.23 m)
Width8 ft 6 in (2.59 m)
Height11 ft 6 in (3.51 m)
Adhesive weight 56.0 long tons (56.9  t; 62.7 short tons)
Loco weight94.8 long tons (96.3  t; 106.2 short tons)
Tender weight52.9 long tons (53.7  t; 59.2 short tons)
Total weight147.7 long tons (150.1  t; 165.4 short tons)
Fuel type Coal
Fuel capacity7.5 long tons (7.6  t; 8.4 short tons)
Water cap.5,000 imp gal (23,000 L; 6,000 US gal)
Firebox:
  Firegrate area
47.7 sq ft (4.4 m2)
Boiler pressure200  psi (1,379  kPa)
Feedwater heater ACFI
Heating surface1,984 sq ft (184.3 m2)
Superheater:
  Heating area485 sq ft (45.1 m2)
Cylinders 2 driving
2 booster
Cylinder size 20 in × 26 in (508 mm × 660 mm)
Performance figures
Power output1,400  hp (1,000  kW)
Tractive effort 30,815  lbf (137.07  kN)
36,815  lbf (163.76  kN) with booster
Career
Number in class6
Numbers965 - 970 [2]
Locale South Island of New Zealand, mainly the Midland line
First run1939 - 1940
Last runDecember 1968
Retired1967 - 1969
Current ownerFerrymead Trust, leased to Mainline Steam
DispositionWithdrawn; 1 preserved

The NZR KB class of 1939 was a class of six mixed traffic steam locomotives built for New Zealand Railways Department (NZR), that operated on New Zealand's railway network. After the success of the K class, the KB class were built to meet the increasing traffic demands on the Midland Line in the South Island. The locomotives had a wheel arrangement of 4-8-4 and first appeared with distinctive streamlining, mainly to hide their ACFI feedwater systems. [3]

Contents

History

Following the success of the K class in the North Island, there was a need for similar locomotives to operate the Midland Line, primarily between Springfield and Arthur's Pass. These new locomotives incorporated a number of improvements upon the K class, including a re-designed plate frame to eliminate cracking issues the K class experienced; roller bearings on all wheels; hydrostatic lubrication throughout; and the inclusion of the ACFI feed-water system that had been pioneered on K 919. The ACFI equipment's aesthetic appearance had been criticised, hence the KB and contemporary KA classes were both fitted with shrouding to obscure it.

The KB class were technically very similar to the KA class, but were distinguished by the inclusion of a booster engine on the rear axle of the trailing bogie and Nicholson thermic syphons in the firebox. [3] The use of the booster, first proposed for the K class in 1932, was mainly due to steeper gradients and heavy freight trains on the Midland Line, especially Cass bank. Additional piping and sanding equipment for the booster gave the KB a slightly different appearance to the KA. The booster was intended solely for use at low speed, and some class members ultimately had the booster removed due to problems such as jamming in gear, reducing the locomotive's top speed.

Construction of the locomotives commenced in 1939. Construction and assembly took place at NZR's Hillside Workshops. The first of the six-member class was produced before the first of the KA class under construction at Hutt Workshops, in June 1939. [2] All of the class were in service by 1940. [2]

In service

As intended, the KB class were based solely in the South Island and performed most of their work hauling freight trains on the Midland Line. During the Second World War, they were also used on the Main South Line.

While the aesthetic shrouding cleaned up the appearance of the locomotives, it was open at the top and gathered soot and dust which affected the working environment in the cab. After the war, the aesthetic shrouding was removed from the locomotives and the ACFI feed-water system was replaced with exhaust steam injector.

Although the K and KA classes were converted to burn oil at the time, the KB class remained as coal burners due to the availability of high grade West Coast coal.

Withdrawal and disposal

From the mid-1950s, dieselisation impacted the use of the KB class. With the introduction of diesel railcars in the 1950s, the class stopped hauling passenger trains. [3] This became especially pronounced in the 1960s, and the introduction of the DJ class in 1968 brought about their ultimate demise. As they were displaced from duties in the late 1960s, some members were used on the Main South Line, including hauling the South Island Limited.

The first withdrawals were KBs 966 and 969 in October 1967; [2] both were cut up for scrap. KB 969 was withdrawn after hauling the only ever double-headed KB train, having suffered a cracked motion bracket. Before it was sent to the breakers' yard, it was inscribed with a message reading "Goodbye Kb 969, you'll come back as roofing iron". [4]

KB 967 was withdrawn in October 1968. [2] This left only three KB's in service (965, 968 and 970), and of those, only 968 and 970 were still used regularly while 965 was kept as a standby spare locomotive from July 1968 onwards; with the remaining two being withdrawn in March 1969. [2] 970 was scrapped in late March 1968, while 968 made its last journey on 22 June 1969, hauling a railway enthusiast's excursion from Christchurch to Arthur's Pass and return, and 965 was scrapped in late September 1969.

Preservation

NZR donated members of the K and KA classes for preservation, but due to the considerable technical similarities, it chose not to donate a KB. Instead, enthusiasts purchased one at the scrap market rate of NZ$1500 (equal to $22,200 in December 2008 dollars). [5] KB 968 was supposed to be cut up the week following its last excursion, but a collection on the return journey was sufficient to temporarily save the locomotive. [4] Retired school teacher Cyril Evans raised the rest of the $1500 by showing railway films to Christchurch school children and collecting their donations. The locomotive was then vested into the Ferrymead Trust on behalf of the children of Canterbury and was displayed for a number of decades at the Ferrymead Railway. [6] It is currently under restoration to mainline operating condition at Mainline Steam's Wellington depot.

Related Research Articles

<span class="mw-page-title-main">Railway preservation in New Zealand</span>

Railway preservation in New Zealand is the preservation of historically significant facets of New Zealand's rail transport history. The earliest recorded preservation attempt took place in 1925, although the movement itself did not start properly until 1960. New Zealand appears to have a higher proportion of organized railway enthusiasts per 1,000 of population than any other part of the world.

<span class="mw-page-title-main">NZR F class</span>

The New Zealand F class was the first important class of steam locomotive built to operate on New Zealand's railway network after the national gauge of 3 ft 6 in was adopted. The first locomotives built for the new gauge railways were two E class double Fairlies for the Dunedin and Port Chalmers Railway Company. The F class was the first class ordered by the central government, and between 1872 and 1888, a total of eighty-eight members of the class were constructed.

NZR W<sup>D</sup> class

The NZR WD class was a class of tank locomotive built by Baldwin Locomotive Works to operate on New Zealand's national rail network.

<span class="mw-page-title-main">NZR E class (1872)</span>

The NZR E class of Double Fairlie steam locomotives were two different types of Fairlie steam locomotives, used on New Zealand's railway network.

<span class="mw-page-title-main">NZR X class</span>

The New Zealand X class was a pioneering class of eighteen 4-8-2 steam locomotives built for New Zealand Railways Department (NZR) and designed by A. L. Beattie that operated on the national rail network of New Zealand. In 1908, a heavy and powerful locomotive was required to haul traffic on the newly completed mountainous central section of the North Island Main Trunk Railway, and as a logical progression of the 4-6-2 Q class design, the 4-8-2 wheel arrangement was created for the X class.

<span class="mw-page-title-main">NZR C class (1930)</span>

The NZR C class consisted of twenty-four steam locomotives built to perform shunting duties on New Zealand's national rail network. It is sometimes known as the big C class to differentiate it from the C class of 1873.

NZR W<sup>AB</sup> class

The NZR WAB class locomotives were steam locomotives designed, built and used by New Zealand Railways Department (NZR). Their wheel arrangement is described by the Whyte notation 4-6-4T. The locomotives were designed by NZR chief draughtsman S.H. Jenkinson as tank versions of the AB class 4-6-2 Pacific locomotive. Initially, the locomotives were separated into two classes, designated WAB for mainline work and WS for suburban work.

NZR J<sup>A</sup> class

The NZR JA class were a type of 4-8-2 steam locomotive used on the New Zealand railway network. The class was built in two batches, the first batch was built at Dunedin's Hillside Workshops between 1946 and 1956 and the second batch by the North British Locomotive Works in 1951. To distinguish between the batches, locomotives are identified by their maker.

This is a list of jargon commonly used by railfans and railway employees in New Zealand.

<span class="mw-page-title-main">New Zealand EW class locomotive</span>

The New Zealand EW class locomotive was a type of electric locomotive used in Wellington, New Zealand. The classification "EW" was due to their being electric locomotives allocated to Wellington. For two decades until the advent of the DX class they were the most powerful locomotives in New Zealand.

<span class="mw-page-title-main">NZR K class (1932)</span>

The NZR K class of 1932 was a class of mixed traffic 4-8-4 steam locomotives built by the New Zealand Railways Department (NZR) that operated on New Zealand's railway network. The locomotives were developed following the failure of the G class Garratts. The class should not be confused with the much earlier K class of 1877-78, the first American-built engines to arrive in New Zealand.

<span class="mw-page-title-main">NZR G class (1928)</span>

The NZR G class was a type of Garratt steam locomotive used in New Zealand, later rebuilt as Pacific type locomotives. They were the only Garratt type steam locomotives ever used by the New Zealand Railways (NZR). They were ordered to deal with traffic growth over the heavy gradients of the North Island Main Trunk (NIMT) and to do away with the use of banking engines on steep grades. They were one of the few Garratt designs to employ six cylinders. A mechanical stoker was used to feed coal into the locomotive.

NZR K<sup>A</sup> class

The NZR KA class of 1939 was a class of mixed traffic 4-8-4 steam locomotives that operated on New Zealand's railway network. They were built after the success of the K class to meet the increasing traffic demands of the New Zealand Railways Department. The locomotives first appeared with distinctive streamlining, mainly to hide their ACFI feedwater heater systems.

<span class="mw-page-title-main">NZR EO class (1923)</span>

The NZR EO class of 1923 were electric locomotives used on the steep Otira to Arthurs Pass section of the Midland Line in New Zealand. They were primarily needed for pulling trains through the 1 in 33 grade 8.5 km (5.3 mi) Otira Tunnel which was too long and steep to allow steam locomotives to be used.

<span class="mw-page-title-main">NZR J class (1939)</span>

The NZR J class steam locomotives were a type of 4-8-2 steam locomotive built for the New Zealand Railways Department (NZR) and used on the New Zealand railway network. Built by the North British Locomotive Works, although designed to work on the lighter secondary lines the class was frequently used on mainline express passenger trains as well as freight. The class first appeared in distinctive streamlining, which was later removed from 1947 onwards for maintenance reasons. The class should not be confused with the earlier 1874 J class. Three J class lasted until the end of steam-hauled services on 26 October 1971, three locomotives of the forty built have been preserved.

<span class="mw-page-title-main">New Zealand DG and DH class locomotive</span>

The New Zealand DG and DH class locomotive were a type of diesel-electric locomotives in operation on New Zealand's rail network from 1955-1983, built by English Electric.

<span class="mw-page-title-main">NZR D class (1874)</span>

NZR D class steam tank locomotives operated on New Zealand's national railway network. The first entered service in 1874 all had been withdrawn by the end of 1927, which allowed the D classification to be used again in 1929.

<span class="mw-page-title-main">NZR W class</span>

The NZR W class consisted of two steam locomotives built at the Addington Railway Workshops in Christchurch, New Zealand by the New Zealand Railways Department (NZR). They were the first locomotives to be built by NZR.

NZR E<sup>C</sup> class

The NZR EC class was a class of electric locomotive used in Christchurch, New Zealand. They replaced steam locomotives on trains through the Lyttelton rail tunnel between Lyttelton and Christchurch.

The Ferrymead 125 celebration was an event to celebrate 125 years of Rail transport in New Zealand. The event was held over a week from 17 to 24 October 1988, with trains running in, and to and from Christchurch.

References

Citations

  1. Lloyd 1974, p. 78.
  2. 1 2 3 4 5 6 Lloyd 1974, p. 79.
  3. 1 2 3 Palmer & Stewart 1965, p. 118.
  4. 1 2 Sinclair 1987, p. 140-145.
  5. "New Zealand CPI Inflation Calculator - Reserve Bank of New Zealand". Archived from the original on 1 July 2010. Retrieved 27 March 2009.
  6. Cavalcade125 1988, p. 12.

Bibliography