| NZR U class | |||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 Steam locomotive 65 | |||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||
The NZR U class, the first tender locomotives built in New Zealand, were a class of 4-6-0 Ten Wheeler locomotive designed to the requirements of Mr T. F. Rotherham and built at NZR Addington between 1894 and 1903. They were amongst NZRs' longest lived tender engines.
The U class was designed to fill a need to provide more powerful and faster passenger locomotives than the N and V classes then in service. The class were the first express locomotives on the NZR to have Walschaerts valve motion and also introduced the 4' 6" driving wheel which would be considered standard for express passenger work. They did however have flat slide valves and would be the last NZR locomotives so built.
The U's were the first tender locomotives built in New Zealand and were a significant step in the country's industrial capability. However, Addington was not yet set up for mass production and construction was intermittent and drawn out, resulting in changes to the design over the course of building. The first pair had a curved running board that started high near the smokebox and curved over downward over the lead driver. The livery was black edged on the tender and cab with chocolate, and lined with a gold stripe. the boiler bands, steam dome casing and leading edge of the Belpaire firebox were polished brass and the wheels and frames were varnished. The second pair introduced the new standard cab but retained wooden headstocks. The third pair received steel headstocks. The final three were built with boilers of 175psi capacity. The last built, No. 378, had a sand dome and continuous brakes, features soon added to the rest.
Although reported to 'curve well and ride easily', and possessed of relatively large driving wheels, they were not a success on the Canterbury plains as intended. According to driver Jack Ewart: "... she [the U class] failed when the Canterbury Nor'wester was blowing and would not stand thrashing and consequently lost time." They were soon replaced on these services by the Baldwin built UB class. Before World War One the class averaged 27,000 miles annually.
Superheating was applied in the 1920s, followed by piston valves shortly afterwards. Between 1935 and 1940 the class received Waikato spark arrestors and tender cabs. Second sand domes and standard funnels were added around this time. By now the class were all stationed in Southland and performed branchline work in and around Invercargill, and were well regarded in these duties.
The class as a whole survived into the 1950s and were withdrawn between 1954 and 1959. Some were dumped in rivers as erosion protection in Southland rivers.
The remains of the chassis from U194 was stored at Waitara, as part of the ill-fated Hooterville Heritage Charitable Trust depot. Hooterville owner Tony Bachelor fell victim to Donald Rea, who was later arrested for (allegedly) defrauding $26.1 million from investors (including the trust). The financial impact of this on the society caused it to close, leaving the chassis exposed and unrestored. The tender of 194 is stored at the Midland Rail Heritage Trust at Springfield which maybe used for one of the Uc's when restored in the future.
The NZR T class was a class of steam locomotive used in New Zealand; of the "Consolidation" type, popular in North America, especially with the narrow gauge Denver and Rio Grande Western Railroad.
The New Zealand F class was the first important class of steam locomotive built to operate on New Zealand's railway network after the national gauge of 3 ft 6 in was adopted. The first locomotives built for the new gauge railways were two E class double Fairlies for the Dunedin and Port Chalmers Railway Company. The F class was the first class ordered by the central government, and between 1872 and 1888, a total of eighty-eight members of the class were constructed.
The NZR A class were a class of steam locomotives built in 1906 with a 4-6-2 wheel arrangement for the New Zealand Railways Department (NZR). The class should not be confused with the older and more obscure A class of 1873. They were designed by the NZR's Chief Mechanical Engineer, A. L. Beattie and his Chief Draughtsman, G. A. Pearson to replace less powerful locomotives struggling with increasing loads on the South Island Main Trunk Railway, and in anticipation of the traffic volumes that would be created upon the completion of the North Island Main Trunk Railway.
The NZR AB class was a class of 4-6-2 Pacific tender steam locomotive that operated on New Zealand's national railway system for New Zealand Railways (NZR). Originally an improvement on the 1906 A class, 141 were built between 1915 and 1927 by NZR's Addington Workshops, A & G Price of Thames, New Zealand, and North British Locomotive Company, making the AB class the largest class of steam locomotives ever to run in New Zealand. An additional eleven were rebuilt from the tank version of the AB – the WAB class – between 1947 and 1957. Two North British-made locomotives were lost in the wreck of the SS Wiltshire in May 1922.
The Wellington and Manawatu Railway Trust is a charitable trust based in Wellington, New Zealand, and is actively restoring former Wellington and Manawatu Railway locomotive No.9, to full working order.
The P class was a class of steam locomotives built to haul freight trains on the national rail network of New Zealand. The class consisted of ten individual locomotives ordered from the British company of Nasmyth, Wilson and Company in 1885, but miscommunications about the weight limitations imposed on the locomotives meant they did not start work until 1887. This debacle came at a time when the New Zealand Railways Department (NZR) was suffering from a lack of motive power to work on its rapidly expanding network and was part of what prompted a shift towards American and home-grown manufacturers.
The New Zealand E class locomotive comprised a single Mallet steam locomotive operated by New Zealand Railways (NZR) from 1906 until 1917. Classified as E 66 and nicknamed Pearson's Dream after its designer, it was an experimental Mallet locomotive designed to work on the Rimutaka Incline. The "E" classification was previously used by the Double Fairlie E class of 1872-75, but the classification was free as they had all been withdrawn by the time E 66 entered service. After the withdrawal of E 66, "E" was again re-used on the battery-electric E class of 1922. It was the only Mallet locomotive to operate for the NZR
The NZR B class of 1899 was a class of steam locomotives that operated on New Zealand's national rail network. An earlier B class of Double Fairlies had entered service in 1874, but as they had departed from the ownership of the New Zealand Railways (NZR) by the end of 1896, the B classification was free to be re-used. Despite early difficulties, they were amongst NZR's most influential designs.
The BA class was a class of steam locomotive built by the New Zealand Railways Department (NZR) for use on New Zealand's national rail network. The first BA entered service in November 1911, with the last of the 11 class members introduced on 14 May 1913.
The NZR C class consisted of twenty-four steam locomotives built to perform shunting duties on New Zealand's national rail network. It is sometimes known as the big C class to differentiate it from the C class of 1873.
The NZR JA class were a type of 4-8-2 steam locomotive used on the New Zealand railway network. The class was built in two batches, the first batch was built at Dunedin's Hillside Workshops between 1946 and 1956 and the second batch by the North British Locomotive Works in 1951. To distinguish between the batches, locomotives are identified by their maker.
The NZR K class of 1932 was a class of mixed traffic 4-8-4 steam locomotives built by the New Zealand Railways Department (NZR) that operated on New Zealand's railway network. The locomotives were developed following the failure of the G class Garratts. The class should not be confused with the much earlier K class of 1877-78, the first American-built engines to arrive in New Zealand.
The NZR KA class of 1939 was a class of mixed traffic 4-8-4 steam locomotives that operated on New Zealand's railway network. They were built after the success of the K class to meet the increasing traffic demands of the New Zealand Railways Department. The locomotives first appeared with distinctive streamlining, mainly to hide their ACFI feedwater heater systems.
The NZR J class steam locomotives were a type of 4-8-2 steam locomotive built for the New Zealand Railways Department (NZR) and used on the New Zealand railway network. Built by the North British Locomotive Works, although designed to work on the lighter secondary lines the class was frequently used on mainline express passenger trains as well as freight. The class first appeared in distinctive streamlining, which was later removed from 1947 onwards for maintenance reasons. The class should not be confused with the earlier 1874 J class. Three J class lasted until the end of steam-hauled services on 26 October 1971, three locomotives of the forty built have been preserved.
The New Zealand V class steam locomotive was used on New Zealand's railway network from 1885 onwards. They were operated by New Zealand Government Railways and the Wellington and Manawatu Railway Company.
The NZR WJ class was a class of one steam locomotive built by Baldwin Locomotive Works for service on New Zealand's private Wellington and Manawatu Railway (WMR). She acquired the WJ classification when the publicly owned New Zealand Railways Department (NZR) purchased the WMR and its locomotive fleet in 1908.
The NZR FA class was a class of tank steam locomotives that was built as a larger version of the NZR F class 0-6-0T. The requirements were for larger water and coal capacity on a locomotive that could handle grades better than the F class. Due to costs involved in producing new machines, NZR chose to rebuild existing machines with larger coal and water capacity, larger boiler and firebox, higher boiler pressure and larger diameter pistons. Seven F class engines were rebuilt between 1892 and 1897. Another seven were built new, one at Newmarket Workshops in 1896 and six at Addington Workshops in 1902–03.
The NZR UA class were a class of 4-6-0 Ten Wheeler locomotive built by the Scottish firm of Sharp Stewart and Company to ease a motive power shortage. They lived relatively short lives amongst NZR ten wheelers, mostly at the southern end of the country where they were seldom photographed.
The NZR UC class were a group of ten 4-6-0 steam locomotives obtained from Scottish builders Sharp, Stewart and Company for New Zealand Railways (NZR). Essentially they were developments of the firm's previous batch of 4-6-0s' for NZR.
The New Zealand WW class was a class of 4-6-4T tank locomotives that operated on the New Zealand national railway network. They were built for New Zealand Railways Department (NZR), and were the final development of the six-coupled tank engine in New Zealand, the penultimate class of tank locomotives to be built for NZR, and the first class of tank locomotives to be built with superheaters.