Prairie Evaporite Formation | |
---|---|
Stratigraphic range: | |
Type | Geological formation |
Unit of | Elk Point Group |
Sub-units | Up to 6 members |
Underlies | Watt Mountain Formation and Dawson Bay Formation |
Overlies | Keg River Formation and Winnipegosis Formation |
Thickness | Up to 300 metres (980 ft) [1] |
Lithology | |
Primary | Halite, anhydrite |
Other | dolomite, mudstone |
Location | |
Region | Alberta Saskatchewan Manitoba North Dakota Montana |
Country | Canada United States |
Type section | |
Named by | A.D. Baillie (1953) [2] |
The Prairie Evaporite Formation, also known as the Prairie Formation, is a geologic formation of Middle Devonian (Givetian) age that consists primarily of halite (rock salt) and other evaporite minerals. It is present beneath the plains of northern and eastern Alberta, southern Saskatchewan and southwestern Manitoba in Canada, [3] and it extends into northwestern North Dakota and northeastern Montana in the United States. [4]
The formation is a major source of potash, most of which is used for fertilizer production. [5] [6] Salt is also produced from the formation, [7] and solution caverns are created in its thick salt beds for natural gas storage. [8]
The Prairie Evaporite Formation consists thick beds of halite, with interbeds of anhydrite, dolomite, dolomitic mudstone and claystone. In southern Saskatchewan and northern North Dakota it includes major deposits of sylvite and carnallite that are mined for their potassium content. [4] [5] [9] Gypsum is present in areas where anhydrite has been altered by reaction with groundwater.
The Prairie Evaporite Formation was deposited in an embayment called the Elk Point Basin. It extended from an open ocean in the present-day Northwest Territories in Canada to northern North Dakota in the United States, covering an area roughly 30% to 40% as large as that covered by today's Mediterranean Sea. An extensive reef complex called the Presqu'ile Barrier developed across the mouth of the embayment, blocking it from the open ocean and restricting the inflow of sea water. Low water levels and excessive evaporation resulted in the deposition of halite and other evaporite minerals in sabkha, supratidal flat and coastal lagoon environments, ultimately leading to the accumulation of potash minerals in the southern part of the area. [3] These events can be compared to the drying of the Mediterranean Sea that occurred during late Miocene time. That event, called the Messinian salinity crisis, resulted in the deposition of sequences of evaporite minerals up to 1,600 metres (5,250 ft) thick. [10]
Groundwater has gained access to Prairie Evaporite Formation along its eastern and southern margins, dissolving the halite and other soluble minerals. That process, which is ongoing today, produced a breccia that consists of fragments of overlying formations that collapsed when their support was removed, as well as insoluble material from within the Prairie Evaporite itself. [1] [3]
The Prairie Evaporite Formation is present in the subsurface in the Western Canada and Williston sedimentary basins, extending from northern Alberta to northern North Dakota, a distance of more than 1,500 kilometres (930 mi). It reaches thicknesses of more than 200 metres (660 ft) near Saskatoon in Saskatchewan, [5] and more than 300 metres (980 ft) north of Fort McMurray in Alberta. [1]
The formation is nowhere exposed in outcrop because its minerals are easily dissolved by water. Intact sequences are usually found at depths of more than 500 metres (1,640 ft) below ground surface, where they are protected by overlying aquitards. The potash deposits of Saskatchewan and North Dakota lie at depths exceeding 950 metres (3,120 ft). [1] [4]
The Prairie Evaporite Formation is part of the Elk Point Group and was named by A.D. Baillie in 1953 based on a core from a well (Imperial Davidson No. 1, 16-8-27-1W3) that was drilled in southern Saskatchewan. [2] There are no geophysical well logs for that core, however, and some intervals were removed for analysis, so in 1969 M.E. Holter designated a more complete reference section from another well (White Rose et al. Drake 4-29-32-22W2) to supplement it. [5] [11]
The formation is usually divided into three members in Alberta. The Whitkow Member at the base, which is present locally in the deepest parts of the basin, consists of coarsely crystalline halite with minor anhydrite. The overlying Shell Lake Member consists primarily of anhydrite interbedded with dolomite. The Leofnard Member at the top consists of halite with minor interbeds of dolomite, anhydrite and mudstone. [5] [9]
Additional units are present in the potash-bearing areas of Saskatchewan and North Dakota. They overlie, or are considered to be submembers of, the Leofnard Member. [9] From base to top, they are the Esterhazy, White Bear, Belle Plaine, Patience Lake Members [5] [7] which, in North Dakota, are overlain by the Mountrail and White Lake Members. [4] They are separated by unnamed zones of halite. [4] [7]
The contact between the Prairie Evaporite Formation and the underlying Keg River Formation (in the north) and Winnipegosis Formation (in the south) is sharp and conformable. The contact with the overlying Watt Mountain Formation (in the north) and Second Red Bed Member of the Dawson Bay Formation (in the south) is sharp and disconformable. [11]
The northern limit of the formation occurs at about 58° north latitude in Alberta, where the Prairie Evaporite grades into the anyhdritic Muskeg Formation through a decrease in its halite content and an increase in its anhydrite content. Along its eastern and southern margins the formation grades into the breccia that results from the dissolution of its halite and anhydrite. Along its western margin it thins to zero at its depositional limit. [1] [3]
In Saskatchewan, underground mining of potash is conducted to depths of about 1,100 metres (3,610 ft), and solution mining is used at greater depths. Reserves suitable for underground and solution mining have been estimated at about 14 billion tonnes (15 billion short tons) and more than 42 billion tonnes (46 billion short tons), respectively. As of 2003, there were 2 solution mines and 8 conventional mines operating in Saskatchewan. [7]
Salt is produced primarily as a byproduct of potash mining. For practical purposes, the salt reserves of the Prairie Evaporite Formation are essentially unlimited. [7]
The thick halite beds of the Prairie Evaporite Formation are essentially impermeable, and numerous solution caverns have been artificially created in them to store natural gas and liquified petroleum gas products. [8] Storage of nuclear waste, carbon dioxide, and other waste products has also been discussed. [1] Because of their impermeability, the salt and anhydrite beds of Prairie Evaporite also act as a seal for petroleum and natural gas reservoirs in underlying formations.
Halite, commonly known as rock salt, is a type of salt, the mineral (natural) form of sodium chloride (NaCl). Halite forms isometric crystals. The mineral is typically colorless or white, but may also be light blue, dark blue, purple, pink, red, orange, yellow or gray depending on inclusion of other materials, impurities, and structural or isotopic abnormalities in the crystals. It commonly occurs with other evaporite deposit minerals such as several of the sulfates, halides, and borates. The name halite is derived from the Ancient Greek word for "salt", ἅλς (háls).
The Michigan Basin is a geologic basin centered on the Lower Peninsula of the U.S. state of Michigan. The feature is represented by a nearly circular pattern of geologic sedimentary strata in the area with a nearly uniform structural dip toward the center of the peninsula.
Sylvinite is a sedimentary rock made of a mechanical mixture of the minerals sylvite and halite. Sylvinite is the most important source for the production of potash in North America, Russia and the UK. Most Canadian operations mine sylvinite with proportions of approximately 31% KCl and 66% NaCl with the balance being insoluble clays, anhydrite and in some locations carnallite. Other deposits of sylvinite are located in Belarus, Brazil, France, Germany, Kazakhstan, Slovakia and Spain.
The Williston Basin is a large intracratonic sedimentary basin in eastern Montana, western North Dakota, South Dakota, southern Saskatchewan, and south-western Manitoba that is known for its rich deposits of petroleum and potash. The basin is a geologic structural basin but not a topographic depression; it is transected by the Missouri River. The oval-shaped depression extends approximately 475 miles (764 km) north-south and 300 miles (480 km) east-west.
The Leduc Formation is a stratigraphic unit of Late Devonian (Frasnian) age in the Western Canada Sedimentary Basin. It takes its name from the city of Leduc, and it was formally described from the B.A. Pyrz No. 1 well in central Alberta, between the depths of 1,623.7 m (5,327 ft) and 1,807.5 m (5,930 ft), by Imperial Oil Limited in 1950. Supplementary information came from a complete section of the formation that was cored in Imperial Oil's Leduc No. 530 well between 1,633 m (5,358 ft) and 1,863 m (6,112 ft).
The Muskeg Formation is a geologic formation of Middle Devonian (Givetian) age in the Western Canada Sedimentary Basin. It extends from the plains of northwestern Alberta to northeastern British Columbia, and includes important petroleum and natural gas reservoirs in the Zama lake and Rainbow Lake areas of northwestern Alberta.
The McMurray Formation is a stratigraphic unit of Early Cretaceous age of the Western Canada Sedimentary Basin in northeastern Alberta. It takes the name from Fort McMurray and was first described from outcrops along the banks of the Athabasca River 5 kilometres (3.1 mi) north of Fort McMurray by F.H. McLearn in 1917. It is a well-studied example of fluvial to estuarine sedimentation, and it is economically important because it hosts most of the vast bitumen resources of the Athabasca Oil Sands region.
The Wabamun Formation is a stratigraphic unit of Late Devonian (Famennian) age in the Western Canada Sedimentary Basin. It takes the name from Wabamun Lake and was first described in the Anglo Canadian Wabamun Lake No. 1 well by Imperial Oil in 1950.
The Exshaw Formation is a stratigraphic unit in the Western Canada Sedimentary Basin. It takes the name from the hamlet of Exshaw, Alberta in the Canadian Rockies, and was first described from outcrops on the banks of Jura Creek north of Exshaw by P.S. Warren in 1937. The formation is of Late Devonian to Early Mississippian age as determined by conodont biostratigraphy, and it straddles the Devonian-Carboniferous boundary.
The Palliser Formation is a stratigraphic unit of Late Devonian (Famennian) age in the Western Canada Sedimentary Basin. It is a thick sequence of limestone and dolomitic limestone that is present in the Canadian Rockies and foothills of western Alberta. Tall cliffs formed of the Palliser Formation can be seen throughout Banff and Jasper National Parks.
The Beaverhill Lake Group is a geologic unit of Middle Devonian to Late Devonian age in the Western Canada Sedimentary Basin that is present in the southwestern Northwest Territories, northeastern British Columbia and Alberta. It was named by the geological staff of Imperial Oil in 1950 for Beaverhill Lake, Alberta, based on the core from a well that they had drilled southeast of the lake, near Ryley, Alberta.
The Elk Point Group is a stratigraphic unit of Early to Middle Devonian age in the Western Canada and Williston sedimentary basins. It underlies a large area that extends from the southern boundary of the Northwest Territories in Canada to North Dakota in the United States. It has been subdivided into numerous formations, number of which host major petroleum and natural gas reservoirs.
The Winterburn Group is a stratigraphical unit of Frasnian age in the Western Canadian Sedimentary Basin.
The Saskatchewan Group is a stratigraphical unit of Frasnian age in the Western Canadian Sedimentary Basin.
The Manitoba Group is a stratigraphical unit of middle to late Devonian age in the Western Canadian Sedimentary Basin.
The Gravelbourg Formation is a stratigraphical unit of Bajocian age in the Western Canadian Sedimentary Basin.
In geology, the Paradox Formation Is a Pennsylvanian age formation which consists of abundant evaporites with lesser interbedded shale, sandstone, and limestone. The evaporites are largely composed of gypsum, anhydrite, and halite. The formation is found mostly in the subsurface, but there are scattered exposures in anticlines in eastern Utah and western Colorado. These surface exposures occur in the Black Mesa, San Juan and Paradox Basins and the formation is found in the subsurface in southwestern Colorado, southeastern Utah, northeastern Arizona and northeastern New Mexico.
The Deadwood Formation is a geologic formation of the Williston Basin and Western Canada Sedimentary Basin. It is present in parts of North and South Dakota and Montana in the United States, and in parts of Alberta, Saskatchewan, and southwestern corner of Manitoba in Canada. It is of Late Cambrian to Early Ordovician age and was named for exposures in Whitewood Creek near Deadwood, South Dakota. It is a significant aquifer in some areas, and its conglomerates yielded significant quantities of gold in the Black Hills of South Dakota.
The La Loche Formation is a geologic formation of early Middle Devonian (Eifelian) age in the Western Canada Sedimentary Basin. It is present in northeastern Alberta and northwestern Saskatchewan and was first described by A. W. Norris in 1963, who named it for a Roman Catholic Mission at Lac La Loche. Its type section is located at Contact Rapids on the Clearwater River in Saskatchewan, northwest of Lac La Loche. It is not fossiliferous.
La Saline Natural Area in the boreal forest of northeastern Alberta, Canada, preserves Saline Lake, a saline oxbow lake adjacent to the Athabasca River north of Fort McMurray. The lake is an important stop for waterfowl and other birds that migrate along the Athabasca River. Large deposits of tufa have accumulated around the salt springs on the lake's southeastern shore.
{{cite web}}
: CS1 maint: multiple names: authors list (link){{cite web}}
: CS1 maint: multiple names: authors list (link){{cite web}}
: CS1 maint: multiple names: authors list (link)