Princess (car)

Last updated

Austin/Morris/Wolseley 1800/2200 (until September 1975)
Princess (thereafter)
1977 Princess 2200 HL.jpg
1977 Princess 2200 HL
Overview
Manufacturer British Leyland, Austin Morris division
Production1975–1981 (until 1982 for New Zealand)
AssemblyUnited Kingdom
New Zealand: Nelson
Designer Harris Mann
Body and chassis
Class Large family car
Body style 4-door saloon
Layout FF layout
Powertrain
Engine 1.8 L B-series pushrod straight-4 (Austin 1800 & Morris 1800 only)
2.2 L E-series SOHC straight-6 (Austin 2200, Morris 2200 & Wolseley Saloon only)
Transmission 4-speed manual all-synchromesh [1]
3-speed automatic
Dimensions
Wheelbase 105 in (2,667 mm) [1]
Length175.4 in (4,455 mm) [1]
Width68.1 in (1,730 mm) [1]
Height55.5 in (1,410 mm) [1]
Chronology
Predecessor Austin 1800 & 2200 (ADO17)
Morris 1800 & 2200 (ADO17)
Wolseley 18/85 & Six (ADO17)
Successor Austin Ambassador

The Princess is a large family car produced in the United Kingdom by the Austin-Morris division of British Leyland from 1975 until 1981 (1982 in New Zealand). The car inherited a front-wheel drive / transverse engine configuration from its predecessor, the Austin/Morris 1800 range. This was still unusual in Europe for family cars of this type and gave the Princess a cabin space advantage when compared with similarly sized cars from competing manufacturers.

Contents

The car, which had the design code ADO71, [2] was originally marketed as the Austin / Morris / Wolseley 18–22 series. Ahead of the October 1975 London Motor Show the range was rebranded "Princess". This was effectively a new marque created by British Leyland, [3] although the "Princess" name had previously been used for the Austin Princess limousine from 1947 to 1956, [4] and the Vanden Plas Princess. The Princess is often referred to, incorrectly, as the Austin Princess. Although this name was not used in the UK market, it was used in New Zealand. The car was later revamped as the Austin Ambassador, a hatchback, which was produced from 1981 until 1984 and only available in Britain and Ireland.

Princess sales, although initially strong, were tailing off by the end of the 1970s. Some competitors had added a fifth door as a "hatchback", something the Princess lacked (though Harris Mann originally designed the car with a hatch) and the large family car sector fell victim to a poor economic climate further compounded by the OPEC oil crisis. The Princess was somewhere between the Ford Cortina and Ford Granada in terms of size, being designed to compete with more expensive versions of the Cortina as well as entry-level versions of the Granada. British Leyland restyled the Princess with a separate boot so that it would not compete with their existing SD1 and Maxi designs.

The limousine version was devised in late 1975 and produced on a small scale by Woodall Nicholson. Based on the top of the range Princess 2200 HLS, stretched at the B-pillar to allow more room for the rear compartment, the front door remained unchanged, making the car look oddly proportioned from the side. The Princess 2200 HLS Limousine was produced between 1975 and 1979, and was mostly sold to local borough councils (as a mayoral car) and to the funeral sector. The Princess limousine was a lower cost alternative to the Daimler DS420 for local government use.

Total production amounted to 224,942 units, with most examples scrapped by the 1990s.

Launch of the Austin / Morris / Wolseley 18–22 series

1975 Austin 1800 (ADO71) Austin 1800 (ADO71).jpg
1975 Austin 1800 (ADO71)
Wolseley Saloon Wolseley saloon 1975.jpg
Wolseley Saloon

The car was launched on 26 March 1975 as the 18–22 series, "the car that has got it all together". The number designation 18–22 referred to the engine sizes available carried forward from the 1800 cc BMC B-series and 2200 cc E-series-engined BMC ADO 17 "Landcrab". For the first six months of production three badge-engineered versions were produced: Austin, Morris and Wolseley. The Austin model bore the original "design intent", featuring trapezoidal headlights and a simple horizontally-vaned grille with added "Austin" script to the lower right side. The Morris and Wolseley cars bonnets had a raised "hump" permitting a larger, styled grille for each model; the Morris one was a simple chrome rectangle with "Morris" script in the lower right-hand corner, while Wolseleys had a chrome grille with the traditional illuminated Wolseley badge in the middle, with narrower vertical bars either side set back within the chromed surround. Both of these versions had four round headlights, and the Wolseley model was only available with the six-cylinder engine and luxury velour trim. Apart from their bonnet and headlamp designs, and of course their badging, the Austin and Morris models were virtually identical.

Models

ModelsYearsEngine typesTransmissions
Austin 1800March–September 19754-cyl 1798 cc B series4-speed manual
3-speed automatic
Austin 1800 HLMarch–September 19754-cyl 1798 cc B series4-speed manual
3-speed automatic
Austin 2200 HLMarch–September 19756-cyl 2227 cc E series4-speed manual
3-speed automatic
Morris 1800March–September 19754-cyl 1798 cc B series4-speed manual
3-speed automatic
Morris 1800 HLMarch–September 19754-cyl 1798 cc B series4-speed manual
3-speed automatic
Morris 2200 HLMarch–September 19756-cyl 2227 cc E series4-speed manual
3-speed automatic
Wolseley Saloon [5] March–September 19756-cyl 2227 cc E series4-speed manual
3-speed automatic

Styling

The exterior styling was distinctive, innovative, and somewhat divisive. "The Wedge", as it was often nicknamed, was indeed very wedge-shaped; the styling was all angles and slanting panels. This was very much a 1970s design as created by Italian stylists (see Lamborghini Countach for example). Within BL the car was often referred to as "The Anteater". The designer, Harris Mann, was also responsible for the Triumph TR7, another wedge-shaped car, as was his original design for the Austin Allegro, although by the time that design had been readied for production nearly all the angular styling features had been lost.

The Princess, unlike the Allegro, made it to regular production relatively unscathed and unaltered from Harris's original plan. The bonnet (hood) was a little higher, to allow for taller engines, but the biggest change from Harris's design involved the rear. Harris had intended the design to be a five-door hatchback, but management decided that the Austin Maxi should be the only hatchback in the range, making that its unique selling point, and besides, they thought the Princess's prospective buyers would dislike a hatchback – despite the fact that in the Rover division the larger Rover SD1 was being given a hatchback design. Consequently, the Princess received fixed rear glass and a separate boot, belying its appearance. An estate version was also proposed, but never reached production.

Mechanical details

The base engine fitted was the 1798 cc B-series pushrod straight-4. The lay-out closely followed that of the predecessor model, but access to the alternator/water pump was greatly improved by exploiting the car's longer nose to fit a front-mounted radiator. [6] The basic design of the engine dated back to 1947 and the unit with a claimed output of 84 bhp [6] was notably lacking in power, although torque was reasonable. The larger engine, fitted to upper models in the range, was a 2227 cc E-series SOHC straight-6. This was very smooth and a much more modern engine, with a published output figure of 110 bhp, [6] but was still not hugely powerful. The Princess was a big car, and the engine choice gave lacklustre performance, not helped by the provision of only a 4-speed manual gearbox (a Borg-Warner automatic transmission was an option). Suspension used BL's Hydragas system.

Performance and price comparison

A six-cylinder car was road tested by Britain's Autocar magazine in March 1975 at the time of the model's launch. It recorded a maximum speed of 104 mph (167 km/h) and reached 60 mph (97 km/h) from a standing start in 13.5 seconds. [1] The top speed was marginally lower than the 109 mph (175 km/h) achieved by a recently tested Ford Consul 2500 L and a full three seconds slower to 60 mph than the Ford which managed the standing start test in just 10.4 seconds. The 2200 also fell slightly behind the Fiat 132GLS 1800 in these comparisons. [1] At the same time its overall fuel consumption at 20.7 mpg was usefully superior to the Ford's 18.1 mpg. [1] The lighter Fiat was more frugal with fuel than either of the other two. [1] On price, the Austin's domestic market recommended retail prices including taxes of £2,424 was significantly higher than the £2,221 charged for the Ford. [1]

Although its performance figures on paper were a little underwhelming, the testers were impressed with the roominess and roadholding of the Austin 2200. [1] They found it quiet and comfortable, the driving position in particular representing a vast improvement over the car's predecessor. [1] They mentioned in passing that the boot/trunk on the test car "leaked slightly", but did not labour the point. [1]

The Princess was similar in size to the Ford Cortina, and was marketed by British Leyland as a rival to the larger engined versions of the Cortina, as well as smaller engined versions of the Ford Granada.

Princess

Princess
1977 Princess 2200 HL Automatic.jpg
1975–1978 Princess
Overview
Manufacturer British Leyland
Also calledAustin Princess (New Zealand)
ProductionSeptember 1975 – July 1978
Body and chassis
Class Large family car (D)
Body style 4-door saloon
Powertrain
Engine 1.8 L B-series pushrod straight-4
2.2 L E-series SOHC straight-6
Chronology
Predecessor Austin 18-22
Morris 18-22
Wolseley Saloon
SuccessorPrincess 2
interior of a 1977 model 1977 Princess 2200 HL Interior.jpg
interior of a 1977 model

After the publication of the Ryder Report in March 1975, one of its key recommendations was to consolidate the many British Leyland brands into a single "Leyland Cars" organisation with a common dealer network for all marques and models. By September 1975, the process of unifying Austin and Morris dealerships was advanced sufficiently, while the Wolseley marque was to be abandoned. Thus the policy of selling seven 18–22 series models under three different marques was changed and the range was reduced to four models all sold under the Princess name. All cars now used the Austin versions flat bonnet and horizontally-vaned grille, a crown badge was affixed to the point of the bonnet and the script word "Princess" was affixed to the grille replacing the "Austin" script, the thick vinyl-clad C-pillars and the boot. The 1800 models bore the twin headlights, with the 2200 models sporting the wedge-shaped headlights Harris Mann had designed the car to be seen with.

Build quality of the Princess was affected by poor quality control and constant industrial disputes; it gained a reputation for unreliability it could never shake off, even though quality improved in later years. The styling, praised upon introduction, was soon labelled "ugly". To quote a phrase in Parker's Car Price Guide from the 1990s, "an early critic suggested that the people responsible for designing the front and rear of the car were not speaking to one another".

Models

ModelsYearsEngine typesTransmissions
Princess 1800September 1975 – July 19784-cyl 1798 cc B series4-speed manual
3-speed automatic
Princess 1800 HLSeptember 1975 – July 19784-cyl 1798 cc B series4-speed manual
3-speed automatic
Princess 2200 HLSeptember 1975 – July 19786-cyl 2227 cc E series4-speed manual
3-speed automatic
Princess 2200 HLSSeptember 1975 – July 19786-cyl 2227 cc E series4-speed manual
3-speed automatic

Princess 2

Princess 2
British Leyland Princess HL 1979.jpg
1979 Princess 2 HL
Overview
Manufacturer British Leyland
Also calledAustin Princess 2 (New Zealand)
ProductionJuly 1978 – November 1981
Body and chassis
Class Large family car (D)
Body style 4-door saloon
Powertrain
Engine 1.7 L O-series SOHC straight-4
2.0 L O-series SOHC straight-4
2.2 L E-series SOHC straight-6
Chronology
PredecessorPrincess
Successor Austin Ambassador

In July 1978, the Princess was given a revamp and renamed the Princess 2. The main change was the replacement of the 1800 cc B-series engine with the new O-series engine. The new engine was offered in two sizes: 1695 cc and 1993 cc. Since there was an 1800 cc tax barrier for company cars at the time, the 1700 cc O-series engine was developed to take advantage of that, whilst the 2000 cc engine was developed for the private motorists who wanted something different from the hugely popular Ford Cortina. The L and HL models had the twin headlamps and the HLS models got the trapezoids. The car had perhaps reached its pinnacle when the prestigious Motoring Which publication described the Princess 2200 HLS automatic model as "An excellent car, marred only by poor reliability".

Production of the Princess ceased in November 1981.

The basic Princess design lived on in revised form until 1984 as the Austin Ambassador. [7]

Models

ModelsYearsEngine TypesTransmissions
Princess 2 1700 LJuly 1978 – November 19814-cyl 1695 cc O series4-speed manual
3-speed automatic
Princess 2 1700 HLJuly 1978 – November 19814-cyl 1695 cc O series4-speed manual
3-speed automatic
Princess 2 1700 HLSMay 1979 – March 19804-cyl 1695 cc O series4-speed manual
3-speed automatic
Princess 2 2000 HLJuly 1978 – November 19814-cyl 1993 cc O series4-speed manual
3-speed automatic
Princess 2 2000 HLSMay 1979 – November 19814-cyl 1993 cc O series4-speed manual
3-speed automatic
Princess 2 2200 HLJuly 1978 – January 19796-cyl 2227 cc E series4-speed manual
3-speed automatic
Princess 2 2200 HLSJuly 1978 – November 19816-cyl 2227 cc E series4-speed manual
3-speed automatic

New Zealand – Austin Princess

1982 Austin Princess 2 HL in New Zealand. The Princess was badged as an Austin in that country. 1982 Austin Princess 2 HL (9297318875).jpg
1982 Austin Princess 2 HL in New Zealand. The Princess was badged as an Austin in that country.

In New Zealand the car was officially sold as the Austin Princess. Assembled in the New Zealand Motor Corporation's plant in Nelson, it was introduced to the market in 1977 and utilized the Austin 1800 B-series engine.

New Zealand market 1978 Austin Princess 1800 HL (B-series engine) 1978 Austin Princess 1800 HL (23267191895).jpg
New Zealand market 1978 Austin Princess 1800 HL (B-series engine)

In early 1979 the car was re-engined with the BL O-series OHC motor. Due to a conflict of the Austin Princess and Morris Marina competing in the same market sector in New Zealand, the Princess got a 2.0 L unit mounted transversely, while the Marina (which was face-lifted at that time and renamed in NZ as "Morris 1700") received the 1.7 L unit mounted longitudinally.

Being competitively priced, the Princess proved a popular car on the New Zealand market, and proved to be a good alternative to the rear-wheel-drive Ford Cortina, Mitsubishi Sigma and Holden Commodore ranges.

Local production of the car ended in June 1982, when the completely knocked-down kits of the car had been used up. The Austin Princess R, the last model sold there, was still on new-car price lists in 1983, and was available only in black to commemorate the end of local assembly of a long line of Austin cars.

Torcars Princess Estate

The Princess designer Harris Mann intended it to be a hatchback and Torcars created a conversion designed to meet the growing demand for fifth-door saloons which was dealer approved. The Torcars Princess Estate was available in 1800 or 2200 engine sizes, with manual or automatic gearboxes.

The original sleek wedge profile was completely retained but the tailgate revealed an enormous loadspace accessible by probably the largest estate car aperture available on any European car at the time. With the rear seat lowered there is a load length of nearly 6 feet (1.8 m), a load width averaging 4 feet (1.2 m), a load height of nearly 3 feet (0.91 m), and an overall carrying capacity of 54 cubic feet (assuming Dunlop Denovo run-flat wheels and tyres are fitted, obviating the need for a spare wheel).

Also included as standard items not available on the standard Princess were a wash-wipe system for the rear screen and a fully carpeted luggage area.

Related Research Articles

<span class="mw-page-title-main">Mini</span> British car model from 1959 to 2000

The Mini is a small, two-door, four-seat car produced by the British Motor Corporation (BMC) and its successors, from 1959 until 2000. Minus a brief hiatus, original Minis were built for four decades and sold during five, from the last year of the 1950s into the last year of the 20th century, over a single generation, as fastbacks, estates, and convertibles.

<span class="mw-page-title-main">Morris Motors</span> British automotive company

Morris Motors Limited was a British privately owned motor vehicle manufacturing company formed in 1919 to take over the assets of William Morris's WRM Motors Limited and continue production of the same vehicles. By 1926 its production represented 42 per cent of British car manufacture—a remarkable expansion rate attributed to William Morris's practice of buying in major as well as minor components and assembling them in his own factory. Largely self-financed through his enormous profits, Morris did borrow some money from the public in 1926, and later shared some of Morris Motors' ownership with the public in 1936. The new capital was then used by Morris Motors to buy many of his other privately held businesses.

<span class="mw-page-title-main">British Motor Corporation</span> Automobile manufacturer

The British Motor Corporation Limited (BMC) was a UK-based vehicle manufacturer, formed in early 1952 to give effect to an agreed merger of the Morris and Austin businesses.

<span class="mw-page-title-main">Morris Marina</span> Motor vehicle

The Morris Marina is a front-engined, rear-wheel-drive small family car that was manufactured by the Austin-Morris division of British Leyland from 1971 until 1980. It served to replace the Morris Minor in the Morris product line, which had first been built in 1948. The Marina was also sold in some markets as the Austin Marina, the Leyland Marina and the Morris 1700.

<span class="mw-page-title-main">Austin Motor Company</span> Defunct English manufacturer of motor vehicles

The Austin Motor Company Limited was an English manufacturer of motor vehicles, founded in 1905 by Herbert Austin in Longbridge. In 1952 it was merged with Morris Motors Limited in the new holding company British Motor Corporation (BMC) Limited, keeping its separate identity. The marque Austin was used until 1987 by BMC's successors British Leyland and Rover Group. The trademark is currently owned by the Chinese firm SAIC Motor, after being transferred from bankrupt subsidiary Nanjing Automotive which had acquired it with MG Rover Group in July 2005.

<span class="mw-page-title-main">Austin Allegro</span> Car manufactured 1973-1982

The Austin Allegro is a small family car that was manufactured by the Austin-Morris division of British Leyland (BL) from 1973 until 1982. The same vehicle was built in Italy by Innocenti between 1974 and 1975 and sold as the Innocenti Regent. The Allegro was designed as a replacement for the Austin 1100 and 1300 models. In total, 642,350 Austin Allegros were produced during its 10-year production life, most of which were sold on the home market, less than a third of 2.1 million 1100s and 1300s sold in the previous 11 years.

<span class="mw-page-title-main">British Leyland</span> 1968–1986 automotive manufacturing conglomerate

British Leyland was an automotive engineering and manufacturing conglomerate formed in the United Kingdom in 1968 as British Leyland Motor Corporation Ltd (BLMC), following the merger of Leyland Motors and British Motor Holdings. It was partly nationalised in 1975, when the UK government created a holding company called British Leyland, later renamed BL in 1978. It incorporated much of the British-owned motor vehicle industry, which in 1968 had a 40% share of the UK car market, with its history going back to 1895. Despite containing profitable marques such as Jaguar, Rover, and Land Rover, as well as the best-selling Mini, BLMC had a troubled history, leading to its eventual collapse in 1975 and subsequent part-nationalisation.

<span class="mw-page-title-main">Austin Princess</span> Motor vehicle

The Austin Princess is a series of large luxury cars that were made by Austin and its subsidiary Vanden Plas from 1947 to 1968. The cars were also marketed under the Princess and Vanden Plas marque names.

<span class="mw-page-title-main">Austin Ambassador</span> Motor vehicle

The Austin Ambassador is a large family car that was introduced by the Austin Rover Group subsidiary of British Leyland in March 1982. The vehicle was a heavily updated version of the Princess, a saloon car that had lacked a hatchback. Only the doors and inner structure were carried over, but the wedge-shaped side profile betrayed the car's Princess origins, and it was not considered a truly new model. The Princess had been out of production for four months by the time that the Ambassador went on sale.

<span class="mw-page-title-main">Leyland P76</span> Motor vehicle

The Leyland P76 is a large car that was produced by Leyland Australia, the Australian subsidiary of British Leyland. Featuring what was described at the time as the "standard Australian wheelbase of 111 inches", it was intended to provide the company with a genuine rival to large local models like the Ford Falcon, the Holden Kingswood, and the Chrysler Valiant. But, due to the first real fuel crisis and demand far exceeding the supply, Leyland rushed the assembly process with the first of the P76s to come off the assembly line, resulting in poor build quality and some reliability problems. The combination of the rushed assembly, fuel crisis and strikes at the component manufacturers' factories, resulted in the Leyland P76 being labelled a lemon, despite being named Wheels Car of the Year in 1973. By 1974, sales of the P76 had slumped and BMC decided to end the production of the P76. Although the P76 has been labelled a lemon in Australian motoring history, it is viewed by some as an iconic Australian car and has a loyal following.

<span class="mw-page-title-main">Morris Minor</span> Motor vehicle

The Morris Minor is an economy car produced by British marque Morris Motors between 1948 and 1971. It made its debut at the Earls Court Motor Show, London, in October 1948. Designed under the leadership of Alec Issigonis, more than 1.6 million were manufactured in three series: the Series MM, the Series II, and the 1000 series.

<span class="mw-page-title-main">Austin Maxi</span> Motor vehicle

The Austin Maxi is a medium-sized, 5-door hatchback family car that was produced by Austin and later British Leyland between 1969 and 1981. It was the first British car to feature a hatchback body style.

<span class="mw-page-title-main">BMC ADO17</span> Motor vehicle

BMC ADO17 is the model code used by the British Motor Corporation (BMC) for a range of cars in the European 'D' market-segment of larger family cars, manufactured from September 1964 to 1975. The car was initially sold under the Austin marque as the Austin 1800, then by Morris as the Morris 1800, and by Wolseley as the Wolseley 18/85. Later, with a 2.2 L engine, also as the Austin 2200, Morris 2200 and Wolseley Six. Informally, because of the car's exceptional width and overall appearance, these cars became widely known under the nickname "landcrab"

<span class="mw-page-title-main">BMC ADO16</span> Motor vehicle

The BMC ADO16 is a range of small family cars built by the British Motor Corporation (BMC) and, later, British Leyland. Launched in 1962, it was Britain's best-selling car from 1963 to 1966 and from 1968 to 1971. The ADO16 was marketed under various make and model names; however, the Austin 1100 and Morris 1100 were the most prolific of all the ADO16 variants. The car's ubiquity at the height of its popularity led to it simply being known as the 1100 (eleven-hundred) in its home market. Also made with a 1275cc engine, it was then typically called 1300.

<span class="mw-page-title-main">BMC E-series engine</span> Reciprocating internal combustion engine

The BMC E-series engine is a line of straight-4 and straight-6 overhead camshaft automobile petrol engines from the British Motor Corporation (BMC). It displaced 1.5 L or 1.8 L in four-cylinder form, and 2.2 L or 2.6 L as a six-cylinder. The company's native United Kingdom market did not use the 2.6 L version, which was used in vehicles of Australian and South African manufacture. Although designed when the parent company was BMC, by the time the engine was launched the company had become British Leyland (BL), and so the engine is commonly referred to as the British Leyland E-series engine.

<span class="mw-page-title-main">Morris Nomad</span>

The Morris Nomad is a car that was produced in Australia by British Leyland Motor Corporation of Australia from 1969 to 1972. It is a hatchback version of the Morris 1500 sedan, itself a locally produced variant of the British BMC ADO16 design with a larger 1500 cc engine.

<span class="mw-page-title-main">Austin Kimberley</span> Leyland Australia-designed front-wheel-drive sedan based on the Austin 1800 platform

The Austin Kimberley and Austin Tasman "X6" models are a pair of Leyland Australia-designed front-wheel-drive sedans based on the Austin 1800 (ADO17) platform, that were produced from 1970 to 1972 and sold by Austin. At the time of the X6 being launched onto the Australian market it was quite an advanced design in comparison to the other competitors from Ford, Holden and Chrysler, whose rear-wheel drive, conventionally sprung underpinnings dominated the market at the time.

British Motor Corporation (Australia) was a motor manufacturing company formed in Australia in 1954 by the merger of the Austin Motor Company (Australia) and Nuffield (Australia). This followed the merger in 1952 of the Austin Motor Company and the Nuffield Group in the United Kingdom to form the British Motor Corporation. Following further corporate changes in the UK in the late 1960s, BMC Australia was absorbed into the newly established British Leyland Motor Corporation of Australia, the name of which became Leyland Motor Corporation of Australia in 1972, and then JRA Limited in March 1983.

<span class="mw-page-title-main">Austin Freeway</span> Australian car model

The Austin Freeway is an automobile which was developed by BMC Australia, based on the British Austin A60 Cambridge. Introduced in 1962, it was marketed under the Austin name in both four-door sedan and five-door station wagon body styles.

The Austin Drawing Office was the design and engineering department of the British Motor Corporation. From the early 1950s, the resulting projects of the office were known by the initials ADO. The numbers were assigned to vehicle and engineering projects, some resulting in production models. The ADO numbering system continued well beyond BMC's absorption into British Leyland, who continued to use the convention until the late 1970s.

References

  1. 1 2 3 4 5 6 7 8 9 10 11 12 13 "AutoTest: Austin 2200 HL". Autocar . 142. Vol. (nbr 4092). 29 March 1975. pp. 20–25.
  2. Princess Development Story Archived 31 May 2009 at the Wayback Machine Retrieved from www.austin-rover.co.uk on 24 November 2008
  3. Graham Robson, A–Z of Cars of the 1970s, 1990, Page 133
  4. Michael Sedgwick, A–Z of Cars 1945–70, 1986, Page 24
  5. Sales brochure for 1975 Wolseley Saloon, Free Car Brochures Retrieved on 6 February 2012
  6. 1 2 3 "Buying secondhand: Leyland 18–22". Autocar . 23 April 1977. pp. 51–53.
  7. Martin Lewis, A-Z of Cars of the 1980s, 1994, Page 19