![]() |
Proton Perdana (second generation) | |
---|---|
![]() 2014 Proton Perdana 2.4P | |
Overview | |
Manufacturer | Honda Motor Company, Ltd. Proton |
Also called | Honda Accord (eighth generation) |
Production | December 2013 – April 2020 7,420 Units sold |
Assembly | Malaysia: Malacca (HMSB 2013–2016); Shah Alam, Selangor (PROTON Sdn. Bhd. 2016–2020) |
Designer | Bostami Ahmad [1] Daisuke Sawai (Accord) [2] |
Body and chassis | |
Class | Mid-size car (D) |
Body style | 4-door sedan |
Layout | Front-engine, front-wheel drive |
Powertrain | |
Engine | |
Transmission | 5-speed automatic |
Dimensions | |
Wheelbase | 2,800 mm (110 in) [3] |
Length | 4,998 mm (196.8 in) |
Width | 1,845 mm (73 in) |
Height | 1,475 mm (58 in) |
Kerb weight | 1,535 kg (3,384 lb) |
Chronology | |
Predecessor | Proton Perdana (first generation) |
The second generation Proton Perdana is a mid-sized four-door saloon from Malaysian automobile manufacturer, Proton. It was unveiled on 11 December 2013 as the successor to the original Proton Perdana. The second generation Perdana is a badge engineered version of the eighth generation Honda Accord.
Perdana is the Malay language word for Prime.
Proton refers to the 2013–2015 models as the second generation Proton Perdana and the 2016–2020 models as the facelifted second generation Proton Perdana. However, the general public commonly refers both 2013–2015 models and 2016–2020 models based on the eighth generation Honda Accord as second generation Proton Perdana's.
The second generation Proton Perdana project included two phases of development, in which the P4-90B represents the latter half. [4] The second generation Perdana was launched in two phases: the first in mid-December 2013, for sale exclusively to the Malaysian government and the second in June 2016, for the Malaysian Domestic Market. The first phase, second generation Perdana is simply a rebadged North America eighth generation Honda Accord, with minimal exterior and interior changes. [5] [6]
The Proton Perdana was first introduced in 1995 to serve the niche Malaysian luxury market segment which consisted of vehicles with engine displacement of 2,000cc and above. Proton considered a replacement for the Perdana in 2004 under a tie-up with Volkswagen and again in 2005 with Mitsubishi Motors Australia for its 380. However, both ventures were unfruitful and the Perdana continued in production up until 2010. Proton signed a Memorandum of Understanding with Nissan in 2011 with the intention of rebadging the Nissan Fuga or Infiniti M for exclusive sale to Malaysian government officials, but no further developments occurred and the venture was abandoned. [7] [8]
On 29 October 2012, Proton entered a collaboration with Honda. [9] Both companies have agreed to explore collaboration opportunities in the areas of technology enhancement, new product line up and the sharing of vehicle platforms and facilities. [10] In April 2013, it was revealed that the Proton Perdana Replacement Model (PRM) would most likely be based on a Honda Accord chassis, and be powered by Proton's newly acquired range of Petronas E01e 1.8, 2.0 and 2.2 litre engines. [11] Furthermore, it will not be limited to government officials, and will also serve as an instrument to Honda's expansion into the Malaysian market. Additionally, the name Proton Suprima was filed for trademark status under the Intellectual Property Corporation of Malaysia (MyIPO) in January 2013, where the name Suprima has its roots in the English word Supreme, widely speculated and deemed fitting for the Proton PRM's official product name. [12] However, on 14 August 2013, a spyshot of a Proton P3-22A test drive unit confirmed the name Proton Suprima S as the final and official product name of the hatchback complement of the Proton Prevé instead. [13]
On 7 November 2013, spyshots revealed that the PRM would indeed be based on the North American eighth generation Honda Accord. [14] It is not known whether the PRM would be exported to other countries, although such plans are highly unlikely judging from the Proton Inspira's marketing strategy. Unlike the Inspira, which was sold alongside the Mitsubishi Lancer which it was based on, the PRM will present no marketing conflicts to its sister car, as Honda Malaysia has already launched the new ninth generation Honda Accord on 4 September 2013. [15]
The development of the earlier first phase, second generation Perdana spanned from late-2012 to late-2013, or from the announcement of the collaboration between Proton and Honda Motor Company, Ltd to the eight-month product development phase and lastly, the début. [16]
The second generation Perdana commenced production in late-2013 at the Honda Malaysia Sdn. Bhd. (HMSB) plant in Alor Gajah, Malacca. [17]
On 11 December 2013, the long anticipated second generation Proton Perdana was unveiled at an official ceremony in Putrajaya. [18] It was officially badged simply as the Proton Perdana, but it has also been dubbed the New-look Proton Perdana by local media.[ citation needed ] The second generation Perdana has thus become the second Proton car after the Saga to use an existing nameplate. A total of 3,000 Perdanas are delivered on a staggered basis over two years to replace the old Perdanas in government service. [19]
Two versions of the Perdana were unveiled, namely 2.0 and 2.4 litre models. Additionally, three bespoke long-wheelbase editions have been produced for the sixth Prime Minister of Malaysia, Najib Razak, Muhyiddin Yassin and the Prime Minister of Turkey, Recep Tayyip Erdoğan, the latter of which is a left-hand drive unit and a celebratory gift in view of the 50th anniversary of Malaysia–Turkey relations. [16] [20] Only two long-wheelbase editions have been produced for exclusive use by the sixth Prime Minister of Malaysia, Najib Razak, Muhyiddin Yassin. Second generation Proton Perdanas are powered by either Honda's 2.0L R20A3 I4 and 2.4L K24Z2 I4 engines. [21] [16] [20]
On 2 March 2014 at 00:01 MST, a convoy of second generation Proton Perdanas fitted with national and state flags were driven across the Penang Second Bridge during its opening ceremony, cueing the national anthem.
On 18 April 2014, during a two-day bilateral visit to Turkey, Malaysian sixth Prime Minister Najib Razak presented a new Proton Perdana limousine to Turkish Prime Minister Recep Tayyip Erdoğan as a celebratory gift marking the 50th anniversary of Malaysia–Turkey relations. [22] Uniquely, this specific Perdana is a left-hand drive (LHD) example, and is thus far the only known all-new Proton Perdana to be exported out of Malaysia. Additionally, Turkey has historically been a strong market for Proton, and the company plans to introduce the new Prevé and Suprima S models in the country by 2014.
Around 3,000 units of the first phase, second generation Perdana was produced to replace the ageing first generation Perdana fleet in use by civil servants and government officials. [23]
At around mid-2015, at least one prototype of the P4-90B had been completed. [24] Mahathir Mohamad, the chairman of Proton, has made mention that an unnamed aircraft company with the capacity to design cars has also been enlisted in the P4-90B's development. [4] Additionally, it is speculated that Mahathir has in his possession a P4-90B prototype, which he has been evaluating personally. [25]
It was reported that Mahathir had exported his personal Perdana to the UK to contribute to R&D efforts to create an electric vehicle. [26] Instead, it was reported to be found in an unused building in Surrey, UK. [26]
A heavily major makeover of the Perdana's exterior based on the eighth generation Accord was launched in Malaysian market on 14 June 2016. [27] The pricing for the facelifted Proton Perdana was revealed on its launching day to be RM113,888 for the 2.0 litre model, and RM138,888 for the 2.4 litre model (both are "on-the-road prices" for West Malaysia). [28]
Standard safety features includes dual front SRS airbags, dual side airbags, ABS with EBD, front active head rest and seatbelts with pre-tensioner and load limiter system. The 2.4 litre model added adds ESC. [29]
Exterior colour of the vehicle options will includes Midnight Black, Sterling Silver, Cotton White, Graphite Grey, Ruby Red, Citrine Gold and Silver Moon Dust. [29]
On July 15, 2016, it was suggested by the Argentine ambassador to Malaysia that Proton may have a good market audience if the Perdana is exported to Argentina. [30]
In January 2020, then Finance Minister Lim Guan Eng said that the Perdana is retained as the official vehicle for government ministers. [31]
In April 2020, it was reported that the Proton ended production of the Perdana and was discontinued.[ citation needed ]
After Anwar Ibrahim became prime minister, he used the limousine version of the Perdana as one of his official vehicles. [32]
In August 2020, Proton urged drivers of the Perdana made from 2012 to August 2018 to head to the nearest Proton service centre to get the installed Takata passenger airbag inflators changed without charge. [33] [34] Around 6,432 Perdanas are part of the recall. [35]
As of June 2021, around 568 Perdanas did not have their Takata airbags changed. [36]
Year | Malaysia [37] [lower-roman 1] |
---|---|
2013 | 13 |
2014 | 1,280 |
2015 | 1,667 |
2016 | 1,383 |
2017 | 938 |
2018 | 1,237 |
2019 | 821 |
2020 | 45 |
2021 | 36 |
Proton Holdings Berhad, commonly known as Proton, is a Malaysian multinational automotive company. Proton was established on May 7, 1983, as Malaysia's sole national badged car company until the advent of Perodua in 1993. The company is headquartered in Shah Alam, Selangor, and operates additional facilities in Proton City, Perak.
The Honda City is a subcompact car which has been produced by the Japanese manufacturer Honda since 1981.
The Proton Saga is a series of subcompact cars and currently city cars produced by Malaysian automobile manufacturer Proton. Introduced in 1985, the Proton Saga became the first Malaysian car and a major milestone in the Malaysian automotive industry. The Saga is Proton's longest-running and best-selling nameplate, with over 1.9 million units sold worldwide over 37 years.
The Proton Perdana is a series of four-door mid-size sedan cars produced by Malaysian automobile manufacturer Proton.
The Proton GEN•2 is a compact 5-door liftback manufactured by Malaysian automobile manufacturer Proton which launched in 2004. It was initially codenamed Wira Replacement Model (WRM). The GEN•2 uses a platform which was extensively developed in house by Proton and technical partner Lotus. This platform was later adapted for the Proton Satria Neo and Proton Persona.
The Perodua Myvi is a subcompact car/supermini (B-segment) produced by the Malaysian manufacturer Perodua since 2005. Based on the Daihatsu Boon, the Myvi is the result of Perodua's collaboration with both Toyota and Daihatsu. However, the third generation Myvi was entirely designed and made in Malaysia, thus not being based on the third generation Boon. The Myvi was the best-selling car in Malaysia for nine consecutive years, between 2006 and 2014, and again between the years 2018 and 2022. The Myvi has been Malaysia's best-selling car for 14 years since its first full year of sales in 2006. As of 2023, the Myvi reached 1.4 million units sold since the launch of its first generation in 2005.
The Honda HR-V is a subcompact crossover SUV (B-segment) manufactured and marketed by Honda over three generations.
The Proton Exora is a discontinued automobile produced by the Malaysian car manufacturer Proton. Considered to be a compact multi-purpose vehicle (MPV) in the C-segment, it became Malaysia's first locally developed MPV upon its release on April 15, 2009. The Exora is the first Proton based on the P2 platform. Its facelift revision, which debuted on December 15, 2011, became the first Proton to use the CamPro CFE turbocharged engine and CVT technology.
Takata Corporation was a Japanese automotive parts company. The company had production facilities on four continents, with its European headquarters located in Germany. In 2013, a series of deaths and injuries associated with defective Takata airbag inflators made in their Mexico plant led Takata to initially recall 3.6 million cars equipped with such airbags. Further fatalities caused by the airbags have led the National Highway Traffic Safety Administration (NHTSA) to order an ongoing, US-wide recall of more than 42 million cars, the largest automotive recall in U.S. history. In June 2017, Takata filed for bankruptcy. It was acquired by Key Safety Systems. As of January 2024, over 100 million airbag inflators worldwide have been recalled by more than 20 carmakers.
The Proton Prevé is a four-door compact saloon developed by Malaysian automobile manufacturer Proton. It was launched on 16 April 2012 and is based on Proton's next-generation P2 platform. The Prevé is the saloon complement to its sister car, the Proton Suprima S hatchback, and is also the successor of Proton Inspira.
The first generation Proton Saga was the first automobile produced by Malaysian automobile manufacturer, Proton. It was based on the 1983 Mitsubishi Lancer Fiore as a result of a joint venture between HICOM and Mitsubishi. The Proton Saga was officially launched on 9 July 1985 by ex-prime minister Mahathir Mohamad. It was produced in both 4-door saloon and 5-door hatchback styles.
The second generation Proton Saga is a 4-door subcompact sedan produced by Malaysian car manufacturer Proton which launched on 18 January 2008. It succeeds the first generation Proton Saga as the company's flagship model. The second generation Proton Saga is based on a stretched Proton Savvy platform and was developed in-house by Proton with technical support from Lotus Cars and LG CNS.
The Proton Suprima S, codenamed P3-22A is a five-door compact hatchback engineered by Malaysian automobile manufacturer Proton. It was released on 17 August 2013 and is based on Proton's next generation P2 platform. The Suprima S complements the Proton Prevé saloon and has been designed with larger emphasis on international markets.
The first generation Proton Perdana is a four-door mid-size family saloon manufactured by Malaysian automobile producer Proton which launched on 26 January 1995. It is a badge engineered seventh generation Mitsubishi Eterna, developed as the result of a collaboration between Proton and Mitsubishi Motors. About 80,000 first generation Proton Perdanas were sold between 1995 and 2013.
The Perodua Axia is a city car produced by Malaysian automobile manufacturer Perodua. It was launched on 15 September 2014 as the successor to the Viva. The car takes over the title of being the most affordable car in Malaysia from the Viva, and the best-selling car in Malaysia for three consecutive years, between 2015 until 2017. The Axia is the first model to debut from Perodua's all-new second factory in Rawang, Selangor. As of mid-2023, the Axia reached 600,000 units sold since the launch of its first generation in 2014.
The Proton Iriz is a supermini (B-segment) produced by Malaysian automobile manufacturer Proton since 2014. It was unveiled on 25 September 2014 at Proton City by the fourth and seventh Malaysia's prime minister, Dr. Mahathir Mohamad. The Iriz platform is also used by its sedan equivalent, the Persona (BH) which was introduced in 2016.
The Proton E01 engine, formerly known as the Petronas E01 engine, is an upcoming automobile gasoline engine by the Malaysian carmaker, Proton. Originally developed by the Malaysian oil company Petronas in 1997, the engine patents were acquired by Proton in 2012. The engine is currently being reworked in order to meet the upcoming Euro 6C, as the original engine was designed for Euro 2 standard. The E01 engine will become one of the upcoming seven engines being developed by Proton as successors of the CamPro engine family, which are expected to be ready in 2017.
Reinforced Safety Structure (RESS) is the brand name of an automotive safety body construction system by the Malaysian carmaker, Proton. Debuted in 2012 via the Proton Preve, the RESS body structure is also currently being applied to the 2013 Proton Suprima S, the 2014 Proton Iriz and the 2016 Proton Persona. The RESS was developed by Proton in order to meet the tougher global crash safety regulations through the application of heat treatment and Hot Press Forming (HPF) technology.
The Proton X50 is a subcompact crossover SUV produced by the Malaysian car maker Proton. Marketed as a B-segment SUV, the vehicle was revealed on 15 September 2020 and was launched on 27 October 2020. The model is the second SUV from the brand after the X70. The vehicle is a rebadged Geely Binyue with several changes, including the right-hand drive conversion and several mechanical adjustments.
The Proton S70 is a compact sedan produced by Malaysian automobile manufacturer Proton. The vehicle was previewed on 20 November 2023, as it is marked the first sedan car produced by Proton following the 49.9% share acquisition by Geely in 2017. The S70 is the successor to the Proton Prevé.