| Southern Railway Ss class | |||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 Southern Railway No. 5016, constructed new in 1917 | |||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||
The Southern Railway Ss was a class of 2-10-2 "Santa Fe" type steam locomotives built in 1917 and 1918 for the Southern Railway (SOU). They were assigned to haul and bank heavy freight trains over the Saluda Grade and Old Fort Loops in the Blue Ridge Mountains of North Carolina.
Ever since the Santa Fe Railway develop the 2-10-2 wheel arrangement (hence the Railroad's namesake) in 1903, the Southern Railway (SOU) began placing a new order of their own 2-10-2s; the Ss class were built with 57 in (1,448 mm) driving wheels, duplex stokers, 71,000 lb (32.2 tonnes) of tractive effort, and an operating boiler pressure of 190 psi (1.31 MPa). [1] [2] The first batches of fifty-five locomotives (Nos. 5000-5054) were built in 1917 by the Baldwin Locomotive Works in Philadelphia, Pennsylvania. [1] In 1918, the second batches of twenty-five 2-10-2s (Nos. 6350-6374) were built by the American Locomotive Company (ALCO) of Richmond, Virginia for SOU's Cincinnati, New Orleans and Texas Pacific (CNO&TP) division, but were later renumbered to 5055-5079 when being moved to Southern's main division. [1]
These locomotives were designed to haul heavy freight trains, but were proven too slow to work on the Southern Railway's Washington, D.C. to Atlanta main line and too big for the CNO&TP tunnels' tight clearances. [1] [3] However, the Ss locomotives were very efficient on handling the mountain grades in North and South Carolina, Georgia, and Tennessee. [3] Eventually, they were moved to Southern's Asheville and Knoxville divisions to bank and haul heavy freight trains, especially on Saluda Grade between Asheville, North Carolina and Spartanburg, South Carolina and the Old Fort Loops between Asheville and Salisbury, North Carolina in the Blue Ridge Mountains. [1] [3]
To work on the Asheville division, the Ss locomotives were modified with two water gauges made longer for the engineer and fireman to safely measure the water level in the boiler while going up and down the railway grades. [2] Additionally, the Ss locomotives were equipped with a second air pump due to the excessive use of air brakes. [2] While they were used to bank the head end passenger trains, the Ss locomotives were given cab signals and steam brake connection; and the water pipes were added to cool down the driving wheels' tires while descending the mountains. [2]
By the late 1940s, the Southern Railway began to dieselize with the Ss steam locomotives' duties taken over by the EMD F7 diesel locomotives. [3] All of the Ss steam locomotives were retired and scrapped by the early 1950s, with none surviving into preservation. [2]
Under the Whyte notation for the classification of steam locomotives, 4-8-4 represents the wheel arrangement of four leading wheels on two axles, eight powered and coupled driving wheels on four axles and four trailing wheels on two axles. The type was first used by the Northern Pacific Railway, and initially named the Northern Pacific, but railfans and railroad employees have shortened the name since its introduction. It is most-commonly known as a Northern.
The Atchison, Topeka and Santa Fe Railway, often referred to as the Santa Fe or AT&SF, was one of the larger railroads in the United States. The railroad was chartered in February 1859 to serve the cities of Atchison and Topeka, Kansas, and Santa Fe, New Mexico. The railroad reached the Kansas–Colorado border in 1873 and Pueblo, Colorado, in 1876. To create a demand for its services, the railroad set up real estate offices and sold farmland from the land grants that it was awarded by Congress.
Saluda Grade is the steepest standard-gauge mainline railway grade in the United States. Owned by the Norfolk Southern Railway as part of its W Line, Saluda Grade in Polk County, North Carolina, gains 606 feet (185 m) in elevation in less than three miles between Melrose and Saluda. Average grade is 4.24 percent for 2.6 miles (4.2 km) and maximum is 4.9% for about 300 feet (91 m). In late 2001, Norfolk Southern abandoned the grade for economic reasons.
Under the Whyte notation for the classification of steam locomotives, 2-10-2 represents the wheel arrangement of two leading wheels, ten powered and coupled driving wheels, and two trailing wheels. In the United States of America and elsewhere the 2-10-2 is known as the Santa Fe type, after the Atchison, Topeka and Santa Fe Railway that first used the type in 1903.
Under the Whyte notation for the classification of steam locomotives, 2-8-0 represents the wheel arrangement of two leading wheels on one axle, usually in a leading truck, eight powered and coupled driving wheels on four axles, and no trailing wheels. In the United States and elsewhere, this wheel arrangement is commonly known as a Consolidation, after the Lehigh and Mahanoy Railroad’s Consolidation, the name of the first 2-8-0.
Electro-Motive Corporation produced five 1800 hp B-B experimental passenger train-hauling diesel locomotives in 1935; two company-owned demonstrators, #511 and #512, the Baltimore and Ohio Railroad's #50, and two units for the Atchison, Topeka and Santa Fe Railway, Diesel Locomotive #1. The twin engine power unit layout and multiple unit control systems developed with the B-B locomotives were soon adopted for other locomotives such as the Burlington Route's Zephyr locomotives built by the Budd Company in 1936 and EMC's own EMD E-units introduced in 1937. The B-B locomotives worked as proof-of-concept demonstrators for diesel power with the service loads of full size trains, breaking out of its niche powering the smaller custom Streamliners.
The EMD F7 is a 1,500 horsepower (1,100 kW) Diesel-electric locomotive produced between February 1949 and December 1953 by the Electro-Motive Division of General Motors (EMD) and General Motors Diesel (GMD).
The EMD FP7 is a 1,500 horsepower (1,100 kW), B-B dual-service passenger and freight-hauling diesel locomotive produced between June 1949 and December 1953 by General Motors' Electro-Motive Division and General Motors Diesel. Final assembly was at GM-EMD's La Grange, Illinois plant, excepting locomotives destined for Canada, in which case final assembly was at GMD's plant in London, Ontario. The FP7 was essentially EMD's F7A locomotive extended by four feet to give greater water capacity for the steam generator for heating passenger trains.
Southern Railway 4501 is a preserved Ms class 2-8-2 "Mikado" type steam locomotive built in October 1911 by the Baldwin Locomotive Works in Philadelphia, Pennsylvania as the first of its wheel arrangement type for the Southern Railway (SOU). In 1948, the locomotive was retired from the SOU in favor of dieselization and was sold to the shortline Kentucky and Tennessee Railway (K&T) in Stearns, Kentucky to haul coal trains.
The Norfolk and Western class J was a class of fourteen 4-8-4 "Northern" streamlined steam locomotives built by the railway's Roanoke Shops located in Roanoke, Virginia from 1941 to 1950. They were operated by the Norfolk and Western Railway (N&W) in revenue service until the late 1950s.
An oil burner engine is a steam engine that uses oil as its fuel. The term is usually applied to a locomotive or ship engine that burns oil to heat water, to produce the steam which drives the pistons, or turbines, from which the power is derived.
The GE U28CG was a dual-service diesel-electric locomotive produced in 1966 by GE Transportation Systems and derived from their freight-hauling U28C design. The sole customer was the Atchison, Topeka and Santa Fe Railway, which ordered ten early that year for delivery in July and August.
Southern Railway 1401 is a 4-6-2 Heavy Pacific steam locomotive built in July 1926 by the American Locomotive Company (ALCO) of Richmond, Virginia for the Southern Railway (SOU) as a member of the Ps-4 class. It was assigned to haul the Southern's Crescent Limited passenger train between Washington D.C. and Atlanta, Georgia. In 1951, it was retired from revenue service and was donated to the Smithsonian Institution's National Museum of American History in 1961, where it currently remains on permanent static display as the sole survivor of the Southern Railway Ps-4 class.
Southern Railway 630 is a 2-8-0 "Consolidation" type steam locomotive built in February 1904 by the American Locomotive Company (ALCO) of Richmond, Virginia for the Southern Railway as a member of the Ks-1 class. It is currently owned and operated by the Tennessee Valley Railroad Museum (TVRM) in Chattanooga, Tennessee where it resides today for use on excursion trains.
Southern Railway 722 is a class "Ks-1" 2-8-0 "Consolidation" type steam locomotive built in September 1904 by the Baldwin Locomotive Works for the Southern Railway (SOU).
Norfolk and Western 611, also known as the "Spirit of Roanoke" and the "Queen of Steam", is a Norfolk and Western (N&W) class J 4-8-4 "Northern" streamlined steam locomotive built in May 1950 by the N&W's East End Shops in Roanoke, Virginia. It was one of the last steam passenger locomotives built in the United States and represents the pinnacle of steam locomotive technology.
The Southern Railway Ps-4 was a class of 4-6-2 steam locomotives built for the Southern Railway, as well as its subsidiaries, the Alabama Great Southern Railroad and the Cincinnati, New Orleans and Texas Pacific Railway. The locomotives were notable for their green with gold trim liveries, and have been regarded by Smithsonian curator John H. White Jr. as being "among the most celebrated passenger locomotives operated in the United States...."
The Chesapeake and Ohio Railway No. 2716 is a class "K-4" 2-8-4 "Kanawha" (Berkshire) type steam locomotive built in 1943 by the American Locomotive Company (ALCO) for the Chesapeake and Ohio Railway (C&O). While most railroads referred to these 2-8-4 type locomotives as Berkshires, the C&O referred to them as Kanawhas after the Kanawha River which flows through West Virginia. Used as a dual service locomotive, No. 2716 and its classmates served the C&O in a variety of duties until being retired from revenue service in 1956.
Grand Canyon Railway 4960 is a class "O-1a" 2-8-2 "Mikado" type steam locomotive originally built by the Baldwin Locomotive Works in Philadelphia, Pennsylvania in 1923 for the Chicago, Burlington and Quincy Railroad. It was mostly used for hauling freight trains until 1957. It was spared from scrap by the CB&Q, and it was used for their steam excursion program alongside 4-8-4 class O-5b No. 5632, until the program was shut down in 1966. It was sold to the Circus World Museum right before being donated to the Mid-Continent Railway Museum. In the early 1980s, it was operated again by the Bristol and Northwestern Railroad for only three years. Today, it is owned by the Grand Canyon Railway, pulling passenger trains every year between Williams, Arizona and the Grand Canyon National Park alongside former Lake Superior and Ishpeming 2-8-0 "Consolidation" type No. 29.
Atchison, Topeka and Santa Fe No. 1316 is a preserved 1309 class 4-6-2 "Pacific" type steam locomotive built by the Baldwin Locomotive Works in 1911 for the Atchison, Topeka and Santa Fe Railway. It was frequently used for pulling fast passenger trains in Texas, until it was reassigned to freight service in the late 1940s. After being retired in 1954, it was donated to the Fort Concho Museum in San Angelo, Texas for static display. In 1980, No. 1316 was acquired by the Texas State Railroad, who moved it to Rusk, Texas and restored it in 1982 as their No. 500. It continued to operate there until 2002, when it was found to be due for an overhaul, and it spent several years in storage, disassembled. As of 2022, No. 1316 has been put back together during a cosmetic restoration and it is awaiting the necessary overhaul required to operate it again.
| Passenger Locomotives |  | |
|---|---|---|
| Freight and Switching Locomotives | ||
| Survivors | ||
