Last updated
Pieces from a Tinkertoy set Tinkertoy 120137669430.JPG
Pieces from a Tinkertoy set

The Tinkertoy Construction Set—commonly known as Tinkertoy, Tinker Toy, or plural forms thereof—is a construction set for children. It was designed in 1914 and was originally manufactured in Evanston, Illinois, U.S. The brand is now owned by Hasbro.



Children in Laos playing with Tinkertoy sets Tinkertoys in Laos.jpg
Children in Laos playing with Tinkertoy sets

The construction set was designed in 1914six years after the Frank Hornby's Meccano setsby Charles H. Pajeau, who formed the Toy Tinker Company in Evanston, Illinois, to manufacture them. Pajeau, a stonemason, designed the set after seeing children play with sticks and empty spools of thread. Pajeau partnered with Robert Pettit and Gordon Tinker to market a toy that would allow and inspire children to use their imaginations. After an initially-slow start, over a million were sold. [1] [2]

The cornerstone of the set is a wooden spool roughly 1.4 inches (3.6 cm) in diameter, with holes drilled every 45 degrees around the perimeter and one through the center. Unlike the center, the perimeter holes do not go all the way through. With the differing-length sticks, the set was intended to be based on the Pythagorean progressive right triangle.

The sets were introduced to the public through displays in and around Chicago which included model Ferris wheels. Tinkertoys have been used to construct complex machines, including Danny Hillis's tic-tac-toe-playing computer (now in the collection of the Computer History Museum in Mountain View, California) and a robot at Cornell University in 1998.

One of Tinkertoy’s distinctive features is the toy’s packaging. Initially, the mailing tube design was chosen to reduce shipping costs. Early versions of the packaging included an address label on the tube with space for postage. To assist buyers in differentiating between the various offerings, sets were placed in mail tube packages of different sizes and also delineated with a number (e.g.: 116, 136) and a name (e.g.: major, prep, big boy, junior, grad). A colorful "how-to" instruction guide accompanied each set. In the 1950s, color was added and the wooden sticks appeared in red, green, blue, and peach. [3]

The main manufacturing location was a 65,000-square-foot (6,000 m2) four-story plant at 2012 Ridge Avenue, Evanston, Illinois.

Tinkertoys were inducted into the National Toy Hall of Fame at The Strong in Rochester, New York, in 1998. [4]

Hasbro bought the Tinkertoy brand and currently produces both Tinkertoy Plastic and Tinkertoy Classic (wood) sets and parts. [5] The US rights are now owned by Basic Fun!. [6]

Standard parts

In addition to the spools, a standard Tinkertoy set includes:

Spools and pulleys all have a single groove around the outside; "Part W" has two parallel grooves.

Sticks (or "rods") are slotted on each end, both to provide slight flexibility when inserted into snug-fitting holes, and to allow thin cards, flags, and strings to be inserted into the slots. They are color-coded by size; in the 1960s-era sets, they were, in order from shortest to longest, orange, peach, blue, red, green, and violet. Each successively longer rod is (with allowances for the size of the spools) the next smaller size times the square root of two; thus any two of the same size will combine with one of the next size up, and three spools, to form an isosceles right triangle (45°–45°–90°).

Tinkertoy sticks before 1992 were made with a diameter of 0.25 inches (0.64 cm). The earlier sets had natural wood sticks, but changed to colored sticks in the late 1950s. From measurement, the orange sticks are 1.25 inches (3.2 cm) inches long; peach, 2.15 inches (5.5 cm); blue, 3.35 inches (8.5 cm); red, 5.05 inches (12.8 cm); green, 7.40 inches (18.8 cm); and purple, 10.85 inches (27.6 cm). Spools are 1.35 inches (3.4 cm) inches in diameter with holes of 0.30 inches (0.76 cm) inch depth.

Most of the larger sets also include a driveshaft (an unfinished wooden rod without slotted ends, of an intermediate length between "green" and "violet", normally turned with a small plastic crank.

The Ultra Construction Set also includes connectors, small cylindrical plastic pieces approximately 2 inches (5.1 cm) long with a slot in either end and a slotted hole crosswise through the center of the part.

Sets with battery-powered electric motors were available; these sets also typically included at least one wooden "double pulley" with a single snug-fitting through-drilled center hole, and grooved rims at two diameters, allowing different moving parts to operate at different speeds.

See also


  1. Coopee, Todd (14 March 2016). "Tinkertoys Vintage Toys". Toy Tales. Retrieved 14 March 2016.
  2. Cole, David J.; Cole, Eve Browning; Schroeder, Fred E.H. (2003). The encyclopedia of everyday inventions. Westport, Conn.: Greenwood Press. pp. 73–77. ISBN   978-0313313455 . Retrieved 25 January 2017.
  3. Coopee, Todd (14 March 2016). "Tinker Toys". ToyTales.ca.
  4. "Inducted Toys: Alphabetical List". National Toy Hall of Fame. Retrieved 2021-04-16.
  5. Pendergast, Sara (2002). Bowling, Beatniks, and Bell-bottoms: 1900s and 1910s. U X L. ISBN   978-0-7876-5676-8.
  6. "TinkerToy | Basic Fun!".

General and cited references

Related Research Articles

<span class="mw-page-title-main">Drill</span> Tool used to create holes

A drill is a tool used for making round holes or driving fasteners. It is fitted with a bit, either a drill or driver chuck. Hand-operated types are dramatically decreasing in popularity and cordless battery-powered ones proliferating due to increased efficiency and ease of use.

<span class="mw-page-title-main">Tap and die</span> Tools to create screw threads

Taps and dies are tools used to create screw threads, which is called threading. Many are cutting tools; others are forming tools. A tap is used to cut or form the female portion of the mating pair. A die is used to cut or form the male portion of the mating pair. The process of cutting or forming threads using a tap is called tapping, whereas the process using a die is called threading.

<span class="mw-page-title-main">Ice fishing</span> Winter activity of catching fish in frozen-over bodies of water

Ice fishing is the practice of catching fish with lines and fish hooks or spears through an opening in the ice on a frozen body of water. Ice fishers may fish in the open or in heated enclosures, some with bunks and amenities.

<span class="mw-page-title-main">Erector Set</span> Brand of metal toy construction set

Erector Set was a brand of metal toy construction sets which were originally patented by Alfred Carlton Gilbert and first sold by his company, the Mysto Manufacturing Company of New Haven, Connecticut, in 1913. In 1916, the company was reorganized as the A. C. Gilbert Company. The brand continued its independent existence under various corporate ownerships until 2000, when Meccano bought the Erector brand and consolidated its worldwide marketing with its own brand. The coverage here focuses on the historical legacy of the classic Erector Set; for current developments under the "Erector by Meccano" brand name, see the Meccano article.

<span class="mw-page-title-main">Drill bit</span> Type of cutting tool

Drill bits are cutting tools used in a drill to remove material to create holes, almost always of circular cross-section. Drill bits come in many sizes and shapes and can create different kinds of holes in many different materials. In order to create holes drill bits are usually attached to a drill, which powers them to cut through the workpiece, typically by rotation. The drill will grasp the upper end of a bit called the shank in the chuck.

<span class="mw-page-title-main">Rivet</span> Permanent mechanical fastener

A rivet is a permanent mechanical fastener. Before being installed, a rivet consists of a smooth cylindrical shaft with a head on one end. The end opposite the head is called the tail. On installation, the rivet is placed in a punched or drilled hole, and the tail is upset or bucked, so that it expands to about 1.5 times the original shaft diameter, holding the rivet in place. In other words, the pounding or pulling creates a new "head" on the tail end by smashing the "tail" material flatter, resulting in a rivet that is roughly a dumbbell shape. To distinguish between the two ends of the rivet, the original head is called the factory head and the deformed end is called the shop head or buck-tail.

<span class="mw-page-title-main">Hole punch</span> Office tool for making uniform holes in paper

A hole punch, also known as hole puncher, or paper puncher, is an office tool that is used to create holes in sheets of paper, often for the purpose of collecting the sheets in a binder or folder. A hole punch can also refer to similar tools for other materials, such as leather, cloth, or plastic or metal sheets.

<span class="mw-page-title-main">Treenail</span> Wooden fastener

A treenail, also trenail, trennel, or trunnel, is a wooden peg, pin, or dowel used to fasten pieces of wood together, especially in timber frames, covered bridges, wooden shipbuilding and boat building. It is driven into a hole bored through two pieces of structural wood.

<span class="mw-page-title-main">Mandrel</span> Gently tapered cylinder against which material can be forged or shaped

A mandrel, mandril, or arbor is a tapered tool against which material can be forged, pressed, stretched or shaped, or a flanged or tapered or threaded bar that grips a workpiece to be machined in a lathe. A flanged mandrel is a parallel bar of a specific diameter with an integral flange towards one end, and threaded at the opposite end. Work is gripped between the flange and a nut on the thread. A tapered mandrel has a taper of approximately 0.005 inches per foot and is designed to hold work by being driven into an accurate hole on the work, gripping the work by friction. A threaded mandrel may have a male or female thread, and work which has an opposing thread is screwed onto the mandrel.

<span class="mw-page-title-main">Swaging</span> Metalworking process

Swaging is a forging process in which the dimensions of an item are altered using dies into which the item is forced. Swaging is usually a cold working process, but also may be hot worked.

Drill bits are the cutting tools of drilling machines. They can be made in any size to order, but standards organizations have defined sets of sizes that are produced routinely by drill bit manufacturers and stocked by distributors.

<span class="mw-page-title-main">Butt joint</span> Techniques to join two pieces of wood together

A butt joint is a wood joint in which the end of a piece of material is simply placed against another piece. The butt joint is the simplest joint. An unreinforced butt joint is also the weakest joint, as it provides a limited surface area for gluing and lacks any mechanical interlocking to resist external forces.

<span class="mw-page-title-main">Pipe (fluid conveyance)</span> Tubular section or hollow cylinder

A pipe is a tubular section or hollow cylinder, usually but not necessarily of circular cross-section, used mainly to convey substances which can flow — liquids and gases (fluids), slurries, powders and masses of small solids. It can also be used for structural applications; hollow pipe is far stiffer per unit weight than solid members.

<span class="mw-page-title-main">Hole saw</span> Cylindrical saw used to quickly cut holes

A hole saw, also known as a hole cutter, is a saw blade of annular (ring) shape, whose annular kerf creates a hole in the workpiece without having to cut up the core material. It is used in a drill. Hole saws typically have a pilot drill bit (arbor) at their center to keep the saw teeth from walking. The fact that a hole saw creates the hole without needing to cut up the core often makes it preferable to twist drills or spade drills for relatively large holes (especially those larger than 25 millimetres. The same hole can be made faster and using less power.

A molecular model is a physical model of an atomistic system that represents molecules and their processes. They play an important role in understanding chemistry and generating and testing hypotheses. The creation of mathematical models of molecular properties and behavior is referred to as molecular modeling, and their graphical depiction is referred to as molecular graphics.

A lacrosse stick or crosse is used to play the sport of lacrosse. Players use the lacrosse stick to handle the ball and to strike or "check" opposing players' sticks, causing them to drop the ball. The head of a lacrosse stick is roughly triangular in shape and is strung with loose netting that allows the ball to be caught, carried, passed, or shot.

<span class="mw-page-title-main">Weep</span> Small opening that allows water to drain from within an assembly

A weep, a weep hole, or a weep-brick is a small opening that allows water to drain from within an assembly. Weeps are located at the bottom of the object to allow for drainage; the weep hole must be sized adequately to overcome surface tension.

In mechanical engineering, a key is a machine element used to connect a rotating machine element to a shaft. The key prevents relative rotation between the two parts and may enable torque transmission. For a key to function, the shaft and rotating machine element must have a keyway and a keyseat, which is a slot and pocket in which the key fits. The whole system is called a keyed joint. A keyed joint may allow relative axial movement between the parts.

<span class="mw-page-title-main">Tom drum</span> Cylindrical drum

A tom drum is a cylindrical drum with no snares, named from the Anglo-Indian and Sinhala language. It was added to the drum kit in the early part of the 20th century. Most toms range in size between 6 and 20 inches in diameter, though floor toms can go as large as 24 inches (61 cm).

A peg loom is a simple weaving loom. Handheld weaving sticks use the same principle.