Trojan armoured engineer vehicle

Last updated

Trojan
Trojan AVRE in Helmand, Afghanistan MOD 45151228.jpg
A Trojan AEV in Afghanistan during 2010
Type Combat engineering vehicle
Place of originUnited Kingdom
Service history
In service2007–present
Used by Royal Engineers
Wars Operation Moshtarak, Afghanistan (since 2010)
Production history
Designed2000s
Manufacturer BAE Systems Land Systems
Unit cost~£4,217,000
~$6,694,400
~€5,338,860 [1]
Produced2004–
No. built33
Specifications
Mass62.5 tonnes (61.5 long tons; 68.9 short tons)
Length8.3 m (27 ft 3 in) 11.50 m (37 ft 9 in)
Width3.5 m (11 ft 6 in) [lower-alpha 1]
Height2.5 m (8 ft 2 in)
Crew3 (commander, operator, driver)

Armour Chobham/Dorchester Level 2 (classified),
Main
armament
7.62 mm L94A1 (remote controlled)
Engine Perkins CV12-8A Diesel
1,200 hp (890 kW)
Power/weight19.2 hp/t (14.2 kW/t)
TransmissionDavid Brown TN54ETS epicyclic transmission (6 fwd, 2 rev.)
Suspension Hydropneumatic
Operational
range
450 km (280 mi)
Maximum speed 59 km/h (37 mph) 40 km/h (25 mph) off road

The Trojan armoured engineer vehicle (AEV) is a combat engineering vehicle of the British Army. It is used to breach minefields and for many other tasks. It is currently in use with the Royal Engineers.

Contents

Design

The Trojan armoured engineer vehicle is based on a Challenger 2 tank chassis, but lacks the main armament. In place of the turret, it has a large hydraulic excavator arm, which can be used to excavate areas, move obstacles, and deposit the fascine that the Trojan carries at its rear. The Trojan is usually also fitted with a plough on the front, which enables it to clear mines, either detonating them on contact, or pushing them out of the way to clear a safe channel for following vehicles.

For self-defence only, it carries a 7.62mm machine gun.

For rapid mine-clearing purposes, the Trojan can also tow a trailer carrying the Python, a rocket-propelled hose similar to the Giant Viper. This allows for a much quicker way of clearing a path for ground forces. The hose, packed with explosive, is launched across a minefield, and detonates after it hits the ground, clearing a 7-metre wide path for 230 metres.

History

The vehicles were built at BAE Systems Land Systems plant in Newcastle upon Tyne. The contract was awarded in 2001 to Vickers Defence Systems, who were bought by BAE Systems in 2004. The project was known as the Future Engineer Tank. 33 have been built.

It was first used on exercise in May 2007 with the 1st Battalion (Mechanised) of the Duke of Lancaster's Regiment.

A number of Trojans are permanently based in Canada at British Army Training Unit Suffield in order to allow the Royal Engineers to support Armoured Battle Groups on major exercises.

Trojans were first deployed operationally by the British Army to Afghanistan in 2009 engaging in their first advance under contact in 2010. [2] During Operation Moshtarak 28 Engineer Regiment operated the Trojan attempting to use its traditional mine clearance equipment in the Counter-IED role in support of a major British Army advance. [3]

Its companion vehicle, developed at the same time, is another variant of the Challenger 2, the Titan armoured bridge layer, of which 33 have also been built.

See also

Related Research Articles

<span class="mw-page-title-main">Armoured fighting vehicle</span> Combat vehicle with both armament and armour

An armoured fighting vehicle or armored fighting vehicle (AFV) is an armed combat vehicle protected by armour, generally combining operational mobility with offensive and defensive capabilities. AFVs can be wheeled or tracked. Examples of AFVs are tanks, armoured cars, assault guns, self-propelled artilleries, infantry fighting vehicles (IFV), and armoured personnel carriers (APC).

<span class="mw-page-title-main">Military engineering vehicle</span> Battlefield support vehicle

A military engineering vehicle is a vehicle built for construction work or for the transportation of combat engineers on the battlefield. These vehicles may be modified civilian equipment or purpose-built military vehicles. The first appearance of such vehicles coincided with the appearance of the first tanks, these vehicles were modified Mark V tanks for bridging and mine clearance. Modern military engineering vehicles are expected to fulfill numerous roles such as; bulldozer, crane, grader, excavator, dump truck, breaching vehicle, bridging vehicle, military ferry, amphibious crossing vehicle, and combat engineer section carrier.

<span class="mw-page-title-main">Land mine</span> Explosive weapon, concealed under or on the ground

A land mine, or landmine, is an explosive weapon concealed under or camouflaged on the ground, and designed to destroy or disable enemy targets, ranging from combatants to vehicles and tanks, as they pass over or near it.

<span class="mw-page-title-main">Mine plow</span> Device to clear minefield

A mine plow is a device designed to clear a lane through a minefield, allowing other vehicles to follow. A mine plow is typically mounted to a tank or military engineering vehicle. Buried land mines are plowed up and pushed outside the tank's track path or tipped over. Since modern anti-tank mines rely on a focused explosion to destroy armored vehicles, they are useless when turned upside-down; as the tank runs over the mine, it will expend its blast down instead of upwards, causing insignificant damage, if any.

<span class="mw-page-title-main">Mine roller</span> Device mounted on a tank that clears mines by detonating them

A mine roller or mine trawl is a demining device mounted on a tank or armoured personnel carrier, designed to detonate anti-tank mines. It allows engineers to clear a lane through a minefield which is protected by enemy fire.

<span class="mw-page-title-main">Combat engineer</span> Soldier who performs military engineering

A combat engineer is a type of soldier who performs military engineering tasks in support of land forces combat operations. Combat engineers perform a variety of military engineering, tunnel and mine warfare tasks, as well as construction and demolition duties in and out of combat zones.

A Bangalore torpedo is an explosive charge placed within one or several connected tubes. It is used by combat engineers to clear obstacles that would otherwise require them to approach directly, possibly under fire. It is sometimes colloquially referred to as a "Bangalore mine", "banger" or simply "Bangalore" as well as a pole charge.

<span class="mw-page-title-main">M728 Combat Engineer Vehicle</span> Military engineering vehicle

The M728 Combat Engineer Vehicle (CEV) is a full-tracked vehicle used for breaching, obstacle removal, and pioneering operations. Production commenced in 1965 and ceased in 1987. A total of 312 of all variants of these armored engineer vehicles were produced.

<span class="mw-page-title-main">Anti-tank mine</span> Type of land mine designed to destroy tanks

In anti-tank warfare, an anti-tank mine is a type of land mine designed to damage or destroy vehicles including tanks and armored fighting vehicles.

<span class="mw-page-title-main">Hobart's Funnies</span> Modified tanks first used in the Normandy Landings

Hobart's Funnies is the nickname given to a number of specialist armoured fighting vehicles derived from tanks operated during the Second World War by units of the 79th Armoured Division of the British Army or by specialists from the Royal Engineers.

<span class="mw-page-title-main">FV432</span> British armoured personnel carrier

The FV432 is the armoured personnel carrier variant in the British Army's FV430 series of armoured fighting vehicles. Since its introduction in the 1960s, it has been the most common variant, being used for transporting infantry on the battlefield. At its peak in the 1980s, almost 2,500 vehicles were in use.

<span class="mw-page-title-main">79th Armoured Division (United Kingdom)</span> Military unit

The 79th Armoured Division was a specialist armoured division of the British Army created during the Second World War. The division was created as part of the preparations for the Normandy invasion on 6 June 1944, D-Day.

<span class="mw-page-title-main">Mine flail</span> Vehicle-mounted anti-mine device

A mine flail is a vehicle-mounted device that makes a safe path through a minefield by deliberately detonating land mines in front of the vehicle that carries it. They were first used by the British during World War II.

The Giant Viper was a trailer-mounted, vehicle-pulled, mine clearance system, designed to be deployed in areas containing land mines. It was developed for the British Army in the 1950s. It was designed to be towed behind a Centurion gun tank, FV4003, AVRE ; and also the FV432 Armoured personnel carrier.

<span class="mw-page-title-main">Armoured Vehicle Royal Engineers</span> Series of armored military engineering vehicles

Armoured Vehicle Royal Engineers (AVRE), also known as Assault Vehicle Royal Engineers, is the title given to a series of armoured military engineering vehicles operated by the Royal Engineers (RE) for the purpose of protecting engineers during frontline battlefield operations.

<span class="mw-page-title-main">Mine-clearing line charge</span> Explosive charges used for demining

A mine-clearing line charge is a device used to create a breach in minefields under combat conditions. While there are many types, the basic design is for many explosive charges connected on a line to be projected onto the minefield and then exploded, detonating any buried mines, thus clearing a path for troops to cross.

<span class="mw-page-title-main">Python Minefield Breaching System</span> British Army vehicle

The Python Minefield Breaching System is used by the British Army to clear minefields. It replaces the Giant Viper, and has the ability to clear a safe lane in minefields 180–200 m long and 7.3 m wide through which vehicles can pass.

<span class="mw-page-title-main">M1150 Assault Breacher Vehicle</span> Military engineering vehicle

The M1150 Assault Breacher Vehicle (ABV) is a U.S. military mine- and explosives-clearing vehicle, based on the M1 Abrams chassis, equipped with a mine plow and line charges. Its first large scale use by the US Marines (USMC) was in the joint ISAF-Afghan Operation Moshtarak in Southern Afghanistan during the War in Afghanistan in 2010 against the Taliban insurgency.

<span class="mw-page-title-main">AEV 3 Kodiak</span> Armoured engineering variant of a main battle tank

The AEV 3 Kodiak is a Leopard 2 main battle tank (MBT) based armoured engineering vehicle that can be used for a wide variety of battlefield engineering, infrastructure and support roles. These roles can include, but would not be limited to, minefield breaching, route denial, dozing and digging tasks, and the erection or demolition of obstacles. The vehicle was originally developed for a Swiss Army requirement by the consortium of Rheinmetall Landsysteme GmbH (Germany) and RUAG Defence (Switzerland).

<span class="mw-page-title-main">Challenger Armoured Repair and Recovery Vehicle</span> UK armoured recovery vehicle

The Challenger Armoured Repair and Recovery Vehicle or CRARRV is a large British armoured recovery vehicle based on the hull of the Challenger 1 main battle tank. The CRARRV is currently operated in conjunction with the Challenger 2 tanks of the British Army and Royal Army of Oman. It is one of the few vehicles capable of repairing and recovering Challenger tanks in the field. Eighty vehicles were delivered to the British between 1988 and 1993; an additional four vehicles were delivered to Oman.

References

  1. 4.2 m (13 ft 9 in) with appliqué armour[ citation needed ]
  1. Trojan, UK: Armed Forces.
  2. Royal Engineers blast through Taliban IED field with new weapon, UK: MoD.
  3. Trojan used for IED clearance, UK: BBC, 19 February 2010.