Vauxhall A-Type

Last updated

Vauxhall 20 22 and 16-20
A
Vauxhall A-Type A12 3.4-litre 1912.jpg
22.4 horsepower A12 3½-litre, 1912
Overview
Manufacturer Vauxhall
ProductionOctober 1908 to 1915
AssemblyLuton Bedfordshire
Designer Laurence Pomeroy
Powertrain
Engine 4-cylinder inline
186 cu in (3,054 cc)
208 cu in (3,402 cc) [1]
Transmission manual: 4-speed and reverse
(some early cars 3 speed)
clutch
early cars— cone
later cars— multi-plate in graphite
final drive by— [1]
Dimensions
Wheelbase 2,921.0 mm (115 in)
3,124.2 mm (123 in) [1]
Lengthwidth and height depending on coachwork
Kerb weight depends on coachwork
Vauxhall 20 and 22
A
Overview
Manufacturer Vauxhall
Layout
Configuration in-line 4-cylinder
Displacement 3054 c.c.
(3½-litre 3402 cc)
Cylinder bore 90mm
(3½-litre 95mm)
Piston stroke 120mm
Cylinder block material
Sheet copper sump in very early cars, later cast alloy [1]
Valvetrain camshaft gear-driven until 16-20 was driven by chain [1]
Combustion
Fuel systemCarburettors:
White & Poppe
Zenith
Claudel Hobson
gravity or forced feed [1]
Fuel typepetrol
Cooling system thermo syphon
Output
Power output 1909 38 bhp (28 kW; 39 PS)
1910 60 bhp (45 kW; 61 PS)
1913 80 bhp (60 kW; 81 PS)
tax horsepower:
3054cc 20.09hp
3402cc 22.38hp [1]
Early 16-20 engine Early-1620-A-Type-Engine.jpg
Early 16-20 engine
16-20 h.p. 1914 1914 Vauxhall 16-20 2-seater (2829272923).jpg
16-20 h.p. 1914
16-20 h.p. 1914 with racing body 191418 Vauxhall AD.jpg
16-20 h.p. 1914 with racing body

The Vauxhall 20 h.p. chassis code A, was a four-cylinder medium-sized car manufactured by Vauxhall from 1908 to 1914 with one more built in 1920. It was the first production Vauxhall designed by Laurence Pomeroy. It became a highly acclaimed 3 litre of its day and at Brooklands on 26 October 1910 it became the first 20 hp car to exceed 100 mph (160 km/h).[ citation needed ]

Contents

Genesis

Laurence Pomeroy had joined Vauxhall in 1907 as an assistant draughtsman at the age of twenty-two. He first made his mark at the 1908 RAC and Scottish Reliability Trial, held in June of that year. His first prototype, a development of Vauxhall's 12-16 and named Y1, had outstanding success showing excellent hill climbing ability with an aggregate of 37 seconds less time in the hill climbs than any other car in its class and unparalleled speeds around the Brooklands circuit. His Vauxhall was so far ahead of all cars whatever class that the driver could relax, accomplishing the 200 miles (320 km) at an average speed of 46 mph (74 km/h), when the car was capable of 55 mph (89 km/h). It went on to win class E of the Trial. That design was put into production in 1908 as Vauxhall's 20 hp offering. Four distinct variations were produced between 27 October 1908 and the end of production in 1914. One last car was put together in 1920. [1]

The four distinct versions - A09, A11, A12 and 16-20

Engine

The 3-litre side-valve monobloc engine was provided with forced lubrication . The camshaft and magneto were gear-driven until the 16-20 when it was changed to chain drive. [1]

Reviewing the exhibits at the North of England Motor Show at the beginning of 1912 the Manchester Guardian reported that the 20 h.p. engine had been given for 1912 new light connecting rods of very high grade steel and pistons reduced in weight to give smooth running. [2]

Gearbox

The A09 and A11 were supplied with a four-speed gearbox though some of the earliest cars retained the three-speed gearboxes of the 12-16 and at least 70 of the first cars also retained the sheet copper sump of their predecessor. There was a major revision of the chassis for the A12 and for the 16-20 both engine and chassis underwent major redesign. [1]

A12 3 1/2 -litre, 1912 Vauxhall Type A Tourer 1912 (14764519707).jpg
A12 3½-litre, 1912
Sutherland cabriolet 1912 Vauxhall Sutherland cabriolet 1912.png
Sutherland cabriolet 1912

Range for 1913

In November 1912 immediately before the opening of the Olympia Show Vauxhall announced their full range for 1913 would be four chassis:

all were to have 4-speed gearboxes [3]


See the table [1] below for more information.

20 hp
A09
20 hp
A11
20 hp
A12
22 hp
A12
16-20 hp
A12
Production run:
253 cars
359 cars
57 cars
21 cars
271 cars
Period:
Oct 1908 - Oct 1910
Oct 1910 - Jun 1912
Jun 1912 - Nov 1912
Nov 1912 - 1915
Oct 1920 (one car)
Work Orders:
1770–1778
1803–1811
1811 & 1812
1813–1818
Engine:
Capacity
Bore x Stroke
-

3 Litre

90 x120
-
3 Litre 90 x120
-
3 Litre 90 x120
-
3½ Litre 95 x120
-
3 Litre 90 x120
Carburettor:
White & Poppe
Zenith
Claudel Hobson
-
30 mm

-

-

-
30 mm

-

-

-
30 mm
36 mm

-

-
30 mm
36 mm
26 mm
Fuel supply:
gravity
gravity
gravity a few forced feed
forced feed
Cam drive:
gear
gear
gear
chain
Magneto:
Bosch D
Bosch D
Bosch D
Bosch D or Eisman EK4
Clutch:
cone
cone or multi-plate
multi-plate
multi-plate
Brake drums:
12 inches (300 mm)
12 inches (300 mm)
12 inches (300 mm)
9 inches (230 mm)
Rear axle ratio:
1:2.95 to 1:4.13
1:3.65 or 1:3.875
1:3.65 or 1:3.875
1:3.875
King pins:
vertical
vertical
inclined
inclined
Std Wheel size:
875 x105 mm
875 x105 mm
880 x120 mm
815 x105 mm
Sub frame
U section
U section
angle iron
angle iron
Chassis length:
9 ft 7 in (2,920 mm) or 10 ft 3 in (3,120 mm)
9 ft 7 in (2,920 mm) or 10 ft 3 in (3,120 mm)
9 ft 7 in (2,920 mm) or 10 ft 3 in (3,120 mm)
9 ft 9 in (2,970 mm)
Chassis width:
Front:
Rear:
-
30 inches (760 mm) 36 inches (910 mm)
-
30 inches (760 mm) 36 inches (910 mm)
-
30 inches (760 mm) 36 inches (910 mm)
-
28 inches (710 mm) 34 inches (860 mm)

Capable of up to 100 mph (160 km/h) the A-Type Vauxhall was one of the most acclaimed 3-litre cars of its day,[ citation needed ] achieving many records for out-right speed and high speed endurance, within the 21 hp limit, as well as having had some parental involvement in the conception of both the Prince Henry and the 30-98 Vauxhalls. [1]

Fewer than two dozen survive today out of the 950 produced. [1]

Basic chassis changes during production [1]

ModelDate RangeChassis Change Work OrderCar Number / Range of Car NumbersChange
16-2021 Nov 1912 to
2 Oct 1920
1813–1818For the 16-20 A-Type Laurence Pomeroy introduced a completely new chassis design. With the first work order for 16-20 cars 1813 the chassis had changed quite considerably. The 16-20 A-Type Work Order 1813 Chassis was drawn up in May 1912 Drawing Number: No663-664 Drawing Date: 19-05-1912. The chassis narrowed at the front and rear to Front: 28 inches Rear: 34 inches.
1813–1818Sometime in 1913 the clutch, transmission brake and accelerator pedal design changed somewhat.
16-2016 Aug19131814For the 1814 work order the chassis was redesigned again to
20 Sep 1913 - onwards1814A58-A104Sometime between A58 and A104 the support brackets for the running boards changed from a bracket secured by 2 large dome headed bolts to a bracket fixed with 4 smaller bolts. The newly designed brackets slowly were fitted as stocks diminished of the 2 bolt type.

Engine changes during production [1]

ModelDate RangeEngine Change Work OrderEngine Number / Range of Engine NumbersChange
A09xx xxx 19081770–1778The A09...
24 Nov 1908 to

25 Jun 1909

1770–1771A09.01-A09.73Sometime between A09.1 and A09.73 the engine sump was changed from a sheet copper sump carried over from the X Type Engine to a Cast Alloy sump.
A11xx xxx 19081803–1811The A11...
A12xx xxx 19081811–1812The A12...
16-2021 Nov 19121813–1818The 16-20...

For the 16-20 A-Type Laurence Pomeroy introduced a completely new engine design with a silent chain drive for the cam-shaft and magneto. The inlet manifold is now cast en bloc with the radiator cooling outlet pipe located at the front where the fan bolts on this was to allow a waterpump to be fitted if required.

6 Mar 1913 to 26 Jun 19131813-1813A8-A31Sometime between Engine Numbers A8 and A31 the exhaust manifold gained cooling fins located along the top of the manifold.
26 Jun 1913 to 12 Mar 19141813–1814A31-A41Sometime between Engine Numbers A41 and A100 the external oil level pot located on the side of the engine sump carried over from A09-A12 Production was deleted in favour of a redesigned sump integrating this feature.
26 Jun 1913 to

12 Mar 1914

1813–1816A31-A100Sometime between Engine Numbers A31 and A100 the radiator outlet located around the fan on the engine block was relocated to the side of the block near the front under the inlet manifold.
29 Sep 1913 to 12 Mar 19141813–1816A41-A100Sometime between Engine Numbers A41 and A100 the external oil feed line going to each main bearing in the crank case was deleted in favor of an oil gallery integral to the crank case.
12 Mar 1914 to

5 May 1914

1816–1817A100-A151Sometime between Engine Numbers A100 and A151 the number of securing bolts holding the radiator inlet on top of the engine block increased from 4 bolts to 6 bolts.
12 Mar 1914 to

5 May 1914

1816–1817A100-A151Sometime between Engine Numbers A100-A151 the steel baffles located under the cylinders in the engine block were deleted from production.

Surviving cars [1]

ModelYearChassis NumberWork OrderEngine NumberGearbox NumberSteering Box NumberRadiator NumberCoolingPetrol Supply G.Gravity F.ForceMagnetoCarburettorHand Brake DiaSize of TyreRear Axle RatioDate of ManufactureLocationStatusBody Type
A091908A09.11770A09.1Thermo SyphonGBosch DW+P 30mm12"875x10515-6224-11-1908AustraliaRestored
A091909A09.731771A09.73Thermo SyphonGBosch DW+P 30mm12"875x10517-5625-06-1909EnglandRestored
A111911A11.4551808A11.455Thermo SyphonFBosch DW+P 30mm12"875x10516-6229-09-1911SpainRestored
A111911A11.4871808A11.471Thermo SyphonGBosch DW+P 30mm (Current Engine from A11.471 had Zenith 36mm)12"880x12016-627-11-1911AustraliaRestored
A111911A11.5961811A11.440Thermo SyphonFBosch DW+P 30mm12"875x10516-625-02-1912AustraliaRestored
A121912A12.6701812A12.670Thermo SyphonGBosch DZenith 36mm12"875x10516-6223-08-1912AustraliaRestored
A121912EnglandN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/A
16-201913A131813A8N/AN/AN/AThermo SyphonFEiseman EK4Zenith 36mm9"815x10516-626-03-1913New ZealandUnrestored
16-201913A351813A31121151731PumpFEiseman EK4Zenith 36mm9"880x12016-6226-06-1913AustraliaUnder Restoration
16-201913A581814A151N/AN/AN/AThermo SyphonFEiseman EK4Zenith 36mm9"880x12016-6220-09-1913AustraliaRestoredAscot 2 seat (original)
16-201914A1041816A100380N/AN/AThermo SyphonFBosch ZR4Zenith 36mm9"815x10516-6212-3-1914New ZealandUnrestored
16-201914A1701818A186704N/A1601N/AN/AN/AClaudel Hobson 26mm9"880x12015-6201-12-1914AustraliaRestored
16-201914A1981817A192N/AN/AN/AN/AN/ABosch ZR4Claudel Hobson 26mm9"815x10516-6224-11-1914EnglandRestored
16-201914A2071817A197N/AN/AN/AThermo SyphonFEiseman EK4Claudel Hobson 26mm9"880x12016-628-12-1914AustraliaUnrestored
16-201914A2101817A207N/AN/AN/AThermo SyphonFBosch ZU4Claudel Hobson 26mm9"875x10516-6223-10-1914AustraliaRestored
16-201914N/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/AN/A

Related Research Articles

<span class="mw-page-title-main">AC Cars</span> British specialist automobile manufacturer

AC Cars, originally incorporated as Auto Carriers Ltd., is a British specialist automobile manufacturer and one of the oldest independent car makers founded in Britain. As a result of bad financial conditions over the years, the company was renamed or liquidated many times until its present form. In 2022, the new corporate structure began the production of new AC Cobra models, with a slightly modified structure to adapt it to modern safety and technology requirements and obtain the European road homologation certificate.

<span class="mw-page-title-main">Opel Omega</span> Executive car engineered and manufactured by Opel

The Opel Omega is an executive car engineered and manufactured by German automaker Opel between 1986 and 2004. The first generation, the Omega A (1986–1994), superseded the Opel Rekord. It was voted European Car of the Year for 1987, and was available as a saloon or estate. The second generation, the Omega B, was manufactured from 1994 to 2004.

<span class="mw-page-title-main">Caterham 7</span> Motor vehicle

The Caterham 7 is a super-lightweight sports car produced by Caterham Cars in the United Kingdom. It is based on the Lotus Seven, a lightweight sports car sold in kit and factory-built form by Lotus Cars, from 1957 to 1972.

<span class="mw-page-title-main">Arab (automobile)</span> Motor vehicle

The Arab was a high-performance English automobile designed by Reid Railton and manufactured in Letchworth, Hertfordshire, between 1926 and 1928. The factory had previously been used by the Phoenix car company.

<span class="mw-page-title-main">Opel Rekord</span> Motor vehicle

The Opel Rekord is a large family car which was built in eight generations by the German car manufacturer Opel. Between 1953 and 1986, approximately ten million were sold.

<span class="mw-page-title-main">Sunbeam Motor Car Company</span> British automobile manufacturer, 1905–1934

Sunbeam Motor Car Company Limited was a British automobile manufacturer in operation between 1905 and 1934. Its works were at Moorfields in Blakenhall, a suburb of Wolverhampton in Staffordshire, now West Midlands. The Sunbeam name had originally been registered by John Marston in 1888 for his bicycle manufacturing business. Sunbeam motor car manufacture began in 1901. The motor business was sold to a newly incorporated Sunbeam Motor Car Company Limited in 1905 to separate it from Marston's pedal bicycle business; Sunbeam motorcycles were not made until 1912.

<span class="mw-page-title-main">Delage</span> 1905-1953 French automotive brand manufacturer

Delage is a French luxury automobile and racecar company founded in 1905 by Louis Delâge in Levallois-Perret near Paris; it was acquired by Delahaye in 1935 and ceased operation in 1953.

<span class="mw-page-title-main">Chitty Bang Bang</span> Racing cars

Chitty Bang Bang was the informal name of a number of celebrated British racing cars, built and raced by Count Louis Zborowski and his engineer Clive Gallop in the 1920s, which inspired the book, film and stage musical Chitty-Chitty-Bang-Bang.

<span class="mw-page-title-main">Vauxhall Prince Henry</span> Motor vehicle

The Vauxhall Prince Henry was a car manufactured by Vauxhall from 1911 to 1914. It had a length of around 4.05 metres (159.4 in) and a weight of 1,250 kg (2,756 lb) depending on the model and the coachwork fitted.

<span class="mw-page-title-main">Jensen 541R</span> Motor vehicle

The Jensen 541R is a closed four-seater GT-class car built in the United Kingdom by Jensen between 1957 and 1960.

<span class="mw-page-title-main">Fiat 518</span> Motor vehicle

The Fiat 518, also called Fiat Ardita, was a model of car produced by Italian car manufacturer Fiat between 1933 and 1938. The name "Ardita" was also used on the six-cylinder engined and more expensive Fiat Ardita 2500 or 527.

<span class="mw-page-title-main">Fiat 2B</span> Car produced by Fiat from 1912 to 1920

The Fiat Tipo 2B is a car produced by the Italian manufacturer Fiat between 1912 and 1920.

<span class="mw-page-title-main">ALFA 24 HP</span> Motor vehicle

The ALFA 24 HP is a 4.1-litre four-cylinder passenger car, the first model produced by Italian car manufacturer ALFA, which in 1919 would become Alfa Romeo. It was introduced in 1910, the year ALFA was founded, and produced until 1914 in ALFA's Portello factory near Milan. The model's name comes from its tax horsepower rating, then frequently used as vehicle designation.

<span class="mw-page-title-main">ALFA 40/60 HP</span> Motor vehicle

The ALFA 40/60 HP is a road car and race car made by Italian car manufacturer ALFA. This model was made between 1913 and 1922 and was designed by Giuseppe Merosi, as were all other Alfas at that time. The 40/60 HP has a 6082 cc straight-four engine with overhead valves, which produced 70 PS (51 kW) and its top speed was 125 km/h (78 mph). The 40-60 HP Corsa racing version had 73 PS (54 kW) and a top speed of 137 km/h (85 mph), and it also won its own category in the Parma-Berceto race.

Laurence Henry Pomeroy (1883–1941) was an English automotive engineer trained as a locomotive engineer and particularly interested in the introduction of light alloys into automotive applications.

The Marlborough was a make of car sold on the British market between 1906 and 1926. For most of its life the cars were made by Malicet et Blin in France, but after World War I they were partially assembled (finished) in London and an increasing number of British parts used.

<span class="mw-page-title-main">Vauxhall 30-98</span> Motor vehicle

The Vauxhall 30–98 is a car manufactured by Vauxhall at Luton, Bedfordshire from 1913 to 1927. In its day, its best-known configuration was the Vauxhall Velox standard 4-seater with open tourer body. Vauxhall's own description was the 30–98 hp Vauxhall-Velox sporting car. The 30–98 is also known to enthusiasts by Vauxhall's chassis code E.

<span class="mw-page-title-main">Vauxhall D-Type</span> Motor vehicle

The Vauxhall 25 h.p. chassis code D type is a car manufactured by Vauxhall from 1912 to 1922. More than 1,500 were supplied to the British Army in World War I for use as staff cars. Each Vauxhall chassis was sold with a three-year guarantee including regular inspections.

<span class="mw-page-title-main">Gobron-Brillié</span> Defunct French automobile manufacturer (1898–1930) and car model

Gobron-Brillié was an early French automobile manufactured from 1898 to 1930. The original company, Societé des Moteurs Gobron-Brillié, was founded by the French engineer, Eugène Brillié, and industrialist, Gustave Gobron, at 13, quai de Boulogne, Boulogne-sur-Seine, near Paris, in 1898.

<span class="mw-page-title-main">Fiat S76 Record</span> Motor vehicle

The Fiat S76, later also known as Fiat 300 HP Record and nicknamed "The Beast of Turin", was a car built in 1910 by the Italian company Fiat specifically to beat the land speed record held in those years by the Blitzen Benz. Its 28,353 cc displacement engine delivered 290 hp. Only two examples were built.

References

  1. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 From little acorns mighty oaks grow, Alisdaire Lockhart, May 2004. The A Type Vauxhall Register Archived 19 February 2013 at the Wayback Machine
  2. Some Exhibits: Vauxhall. pg 5. The Manchester Guardian; 20 February 1912;
  3. page 1283, The Automotor Journal 2 November 1912