Abingdon Junction railway station

Last updated

Abingdon Junction
General information
Locationnear Radley, Vale of White Horse, Oxfordshire
England
Grid reference SU525975
Platforms?
Other information
StatusDisused
History
Original companyAbingdon Railway Company
Key dates
2 June 1856 [1] Opened
8 September 1873 [2] Closed

Abingdon Junction railway station was a junction station for the branch line to Abingdon. It was opened by the Abingdon Railway Company on 2 June 1856 [1] along with the branch, and was subsequently closed and replaced by Radley railway station on 8 September 1873. [2] Radley station was in a more convenient place for access. At the same time as the station's opening, the next station to the south, formerly known as Abingdon Road was renamed Culham. [3]

In 1837 the first Bill for a railway to Abingdon was laid before Parliament; it would have brought a direct line from Didcot to Oxford through the town. The House of Commons passed the Bill, but the Lords rejected it. The Bill for the Oxford line was revived in the following year, but so strong was the opposition of Mr. Duffield, Abingdon's M.P., that the proposed line was forced to by-pass Abingdon; it eventually opened on 12 June 1844 and ran no nearer to Abingdon than the village of Radley, some two miles to the east. [4]

Located at the point where the branch diverges from the main line, Abingdon Junction was provided purely for interchange for services to Oxford, Culham and Didcot and was not shown in timetables. [5] [6] [7] No proper road access to the station was provided and only modest passenger facilities were afforded consisting of two facing wooden platforms [8] with a small building constructed on the up main side and a run-around loop for branch services and connections with the main line. [8]

Following the conversion of the branch to standard gauge in November 1872, works began to extend the line a further ¾ mile northwards alongside the main line to reach a new station at Radley where it terminated in a bay platform on the station's west side. The station building from Abingdon Junction was transported to Radley, where it was sited just south of the road bridge, most likely on the down side. [9] It remained there until well into British Railways days and was used by gangers and platelayers. [10] The remains of Abingdon Junction survived for several years before their demolition, so that the only trace of the station today is the widened formation to the west of the main line before the Abingdon branch curved away. [11]

Preceding station Historical railways Following station
Oxford   Great Western Railway
Cherwell Valley Line
  Culham
Disused railways
Abingdon   Abingdon Railway Company
Abingdon Branch Line
 Terminus

Related Research Articles

Radley railway station Railway station in Oxfordshire, England

Radley railway station serves the villages of Radley and Lower Radley and the town of Abingdon, in Oxfordshire, England.

Culham railway station Railway station in Oxfordshire, England

Culham railway station serves the village of Culham in Oxfordshire, England. It is on the Cherwell Valley Line between Didcot Parkway and Banbury, 56 miles 17 chains (90.5 km) from London Paddington. It is served by local train services provided by Great Western Railway.

Granborough Road railway station was a station serving the village of Granborough, to the north of Quainton in Buckinghamshire, England.

Winslow Road railway station Former Metropolitan Railway Station in Buckinghamshire

Winslow Road railway station served the village of East Claydon near Winslow to the north of Quainton in Buckinghamshire, England. It was the second station to serve the town after Winslow on the Varsity Line.

Claydon railway station Disused railway station in Buckinghamshire, England

Claydon railway station is a former railway station on the 'Varsity Line', that served the village of Steeple Claydon in Buckinghamshire.

Abingdon railway station Disused railway station in Oxfordshire, England

Abingdon railway station was a station which served the town of Abingdon in Oxfordshire, England until 1963.

Newport Dock Street railway station was one of three stations in central Newport, Monmouthshire.

Winslow railway station Disused railway station in Buckinghamshire, England

Winslow railway station refers to either of two railway stations which historically served or is planned to serve, the town of Winslow in north Buckinghamshire, England. The original station (1850–1968) was on the historical Varsity Line between Cambridge and Oxford or Banbury Merton Street, where it was an important stop before the routes diverged. The planned new station is to be served by East West Rail, a new or re-engineered route between the University cities that reuses the original track-bed at Winslow. In October 2020, the East West Rail Alliance announced that ground works had started on the new station earlier that summer. As of April 2020, the Alliance projects that the Oxford–Bletchley infrastructure will be fully tested and ready to use "in 2024".

Brackley railway station Former railway station in Northamptonshire, England

Brackley Town was a railway station which served the Northamptonshire town of Brackley in England. It opened in 1850 as part of the Buckinghamshire Railway's branch line to Verney Junction which provided connections to Banbury, Bletchley and Oxford and closed in 1963.

Padbury railway station Former railway station in Buckinghamshire, England

Padbury railway station served the village of Padbury in the English county of Buckinghamshire. It opened in 1878 as part of the Buckinghamshire Railway's branch line to Verney Junction which provided connections to Banbury, Bletchley and Oxford and closed in 1964.

Yarnton Junction was a three-platform station serving the village of Yarnton, Oxfordshire. It was built in 1861 at the junction of the Oxford, Worcester and Wolverhampton Railway and Witney Railway, north of Oxford. British Railways closed the station to passengers in 1962 and it was demolished c. 1965.

Witney railway station Former railway station in Oxfordshire, England

Witney railway station served the Oxfordshire town of Witney on the Oxford, Witney and Fairford Railway line. It consisted of two stone-built platforms, a station building, a signal box, and a shed in the form of a pagoda.

Eynsham railway station Former railway station in Oxfordshire, England

Eynsham railway station served the Oxfordshire town of Eynsham and the Eynsham Sugar Beet Factory on the Oxford, Witney and Fairford Railway between Oxford and Witney.

Witney goods station served the Oxfordshire town of Witney on the Oxford, Witney and Fairford Railway. It consisted of seven sidings, a goods shed, a wooden parcel office and a cattle dock. It also had an engine shed, which was demolished early in the twentieth century. Following the opening of the East Gloucestershire Railway in 1873, the station became a goods depot, with passengers using the second station situated to the south. The original station remained open to goods traffic until 1970.

Lechlade railway station

Lechlade railway station served the small town of Lechlade in Gloucestershire, England. The station was on the Oxford, Witney and Fairford Railway, between Oxford and Fairford, it was built where the line crossed the road to Burford, 0.5 miles (0.80 km) north of Lechlade.

Wainhill Crossing Halt railway station

Wainhill Crossing Halt was a halt on the Watlington and Princes Risborough Railway which the Great Western Railway opened in 1925 to serve the Oxfordshire hamlet of Wainhill. The opening of the halt was part of a GWR attempt to encourage more passengers on the line at a time when competition from bus services was drawing away patronage.

Fritwell & Somerton railway station

Fritwell & Somerton railway station was on the Oxford to Banbury line of the Great Western Railway, and was opened four years after the line, in September 1854. It was in the village of Somerton, Oxfordshire.

Moulsford railway station

Moulsford railway station was on the original route of the Great Western Railway, being one of three intermediate stations provided when the line was extended from Reading to Steventon in 1840.

Abingdon Road Halt railway station was built by the Great Western Railway to serve South Hinksey, a village near Oxford.

Hinksey Halt railway station was built by the Great Western Railway to serve New Hinksey, a suburb of Oxford.

References

  1. 1 2 Butt 1995, p. 13.
  2. 1 2 Clinker 1978, p. 2.
  3. Trippett & de Courtais 1985, p. 5.
  4. Trains Illustrated. June 1954. [ page needed ]
  5. "Disused Stations". Subterranea Britannica.
  6. MacDermot 1927, pp. 408–409.
  7. Simpson 2001, p. 53.
  8. 1 2 Trippett & de Courtais 1985, p. 47.
  9. Trippett & de Courtais 1985, p. 49.
  10. Trippett & de Courtais 1985, p. 6.
  11. Trippett & de Courtais 1985, pp. 47–49.

Sources

Coordinates: 51°40′26″N1°14′32″W / 51.67383°N 1.24218°W / 51.67383; -1.24218