Book folding

Last updated

Book folding is the stage of the book production process in which the pages of the book are folded after printing and before binding. [1]

Contents

Until the middle of the 19th century, book folding was done by hand, and was a trade. In the 1880s and 1890s, book folding machines by Brown and Dexter came onto the market, and by the 1910s hand-folding was rare, with one publisher declaring them to be "practically obsolete" in 1914. [1]

The folding process is also necessary to produce print products other than books—for instance mailings, magazines, leaflets etc.

Hand folding

Folding machines

Two main types of mechanisms are commonly employed in folding machines: buckle folders and knife folders. [2] [3] [4]

Buckle folder

In a buckle folder, the paper is first passed through 2 spinning rollers, which feed the paper into a pair of guide plates that redirect the paper at a slight angle, bending the paper. At the far end of the guide plates is a "paper stop". As the rollers continue to spin, the paper continues to slide in between the guides until it hits the paper stop, then, having nowhere else to go, buckles at the interface between the rollers and the angled guides. As the rollers continue to spin, the buckle increases, until it is eventually caught by a pair of "nip" rollers, which pull the buckle in and compresses and flattens it into a neat crease.

Adjusting the paper stop in a buckle folder determines where the fold will be placed. Also, a buckle folder may contain only 3 rollers, with one shared by both the input rollers and the nip rollers. [2]

Although buckle folders are fast, simple, efficient, and have small folding tolerances, they are not suitable for substrate of very low (<40g/m2) or very heavy paper grammage (>120g/m2). [5]

Knife folder

In a knife folder, a sheet of paper is fed horizontally over 2 unpowered rollers until it hits a paper stop, at which point a dull blade pushes down on the paper and in between the 2 rollers to create the fold. [2]

Although the knife folder is slower than buckle folders, it is more precise [2] and can handle extreme grammages very well.[ citation needed ] It also has small folding tolerances, but is a more complex machine.[ citation needed ]

Folding variants

Letter Fold / C-Fold / Tri-Fold
Tri-Fold / Gate Fold
Double Gate Fold / Roll Fold
Z-Fold / Accordion (6-page)
Double Fold / Double Parallel Fold
French Fold / Double Right-Angle Fold Folding.svg
  1. Letter Fold / C-Fold / Tri-Fold
  2. Tri-Fold / Gate Fold
  3. Double Gate Fold / Roll Fold
  4. Z-Fold / Accordion (6-page)
  5. Double Fold / Double Parallel Fold
  6. French Fold / Double Right-Angle Fold

Parallel folds

Folding a paper more than once in the same direction (i.e. with parallel creases) is called parallel folding. Common examples of this are the half fold, letter fold, gate fold, and Z-fold. [2]

Cross folds

A cross fold is when a paper is folded once, then rotated 90 degrees and folded again. The creases therefore cross each other at right angles. The most basic cross fold is the French fold, or right-angle fold. Other examples include the 16-page broadside and the 12-page letter. [2]

See also

Related Research Articles

<span class="mw-page-title-main">Origami</span> Traditional Japanese art of paper folding

Origami is the Japanese art of paper folding. In modern usage, the word "origami" is often used as an inclusive term for all folding practices, regardless of their culture of origin. The goal is to transform a flat square sheet of paper into a finished sculpture through folding and sculpting techniques. Modern origami practitioners generally discourage the use of cuts, glue, or markings on the paper. Origami folders often use the Japanese word kirigami to refer to designs which use cuts.

<span class="mw-page-title-main">Corrugated fiberboard</span> Composite paper material

Corrugated fiberboard or corrugated cardboard is a type of packaging material consisting of a fluted corrugated sheet and one or two flat linerboards. It is made on "flute lamination machines" or "corrugators" and is used for making corrugated boxes. The corrugated medium sheet and the linerboard(s) are made of kraft containerboard, a paperboard material usually over 0.25 millimetres (0.01 in) thick.

<span class="mw-page-title-main">Yoshizawa–Randlett system</span> A diagramming system for describing the folds of origami models.

The Yoshizawa–Randlett system is a diagramming system used to describe the folds of origami models. Many origami books begin with a description of basic origami techniques which are used to construct the models. There are also a number of standard bases which are commonly used as a first step in construction. Models are typically classified as requiring low, intermediate or high skill depending on the complexity of the techniques involved in the construction.

<span class="mw-page-title-main">Mathematics of paper folding</span> Overview of the mathematics of paper folding

The discipline of origami or paper folding has received a considerable amount of mathematical study. Fields of interest include a given paper model's flat-foldability, and the use of paper folds to solve up-to cubic mathematical equations.

<span class="mw-page-title-main">Paperboard</span> Thick paper-based material

Paperboard is a thick paper-based material. While there is no rigid differentiation between paper and paperboard, paperboard is generally thicker than paper and has certain superior attributes such as foldability and rigidity. According to ISO standards, paperboard is a paper with a grammage above 250 g/m2, but there are exceptions. Paperboard can be single- or multi-ply.

A die is a specialized machine tool used in manufacturing industries to cut and/or form material to a desired shape or profile. Stamping dies are used with a press, as opposed to drawing dies and casting dies which are not. Like molds, dies are generally customized to the item they are used to create.

Imposition is one of the fundamental steps in the prepress printing process. It consists of the arrangement of the printed product’s pages on the printer’s sheet, in order to obtain faster printing, simplify binding and reduce paper waste.

<span class="mw-page-title-main">Strider Knives</span>

Strider Knives, Inc. is a custom and production knifemaking facility headed by Mick Strider based in San Marcos, California.

<span class="mw-page-title-main">Folding machine</span>

A folding machine is a machine used primarily for the folding of paper. Folding is the sharp-edged bending of paper webs or sheets under pressure at a prepared or unprepared bending point along a straight line according to specified dimensions and folding layouts. Paper can be folded with either a buckle or a knife; thus, there are generally three types of folding machines: buckle folders, knife folders or a combination of these two types. Whilst buckle folding is the more popular of the two methods, knife folding is sometimes preferable. Folding machine models vary in sophistication, with high-end machines capable of processing more complex folding jobs and unusual paper forms. Organizations required to undertake mass mail-out campaigns often employ folding machines to improve efficiency. However it is very commonly used finishing process across the printing industry.

<span class="mw-page-title-main">Brochure</span> Flyer, pamphlet, or leaflet that is used to pass information about something

A brochure is a promotional document primarily used to introduce a company, organization, products, or services and inform prospective customers or members of the public of the benefits. Although, initially, a paper document that can be folded into a template, pamphlet, or leaflet, a brochure can also be a set of related unfolded papers put into a pocket folder or packet or can be in digital format.

<span class="mw-page-title-main">I-beam</span> Construction element

I-beam is a generic lay term for a variety of structural members with an I or H-shaped cross-section. Technical terms for similar items include H-beam, w-beam, universal beam (UB), rolled steel joist (RSJ), or double-T. I-beams are typically made of structural steel and serve a wide variety of construction uses.

<span class="mw-page-title-main">Bristol board</span>

Bristol board is an uncoated, machine-finished paperboard. It is not named after the city of Bristol in the southwest of England but rather after Frederick Hervey, 4th Earl of Bristol, a prolific art collector. Common sizes include 22+12 in × 28+12 in and its bulk thickness is 0.006 inches (0.15 mm) or higher and A4, A3, A2 and A1. Bristol board may be rated by the number of plies it contains, basis weight, or, in Europe, by its grammage of 220 to 250 g/m2. It is normally white, but is also made in different colours.

<span class="mw-page-title-main">Wasōbon</span> Books in Japan

Wasōbon is a traditional book style in Japan that dates from the late eighth century AD with the printing of "Hyakumantō Darani" during the reign of Empress Shōtoku (764-770AD). The majority of books were hand-copied until the Edo period (1603–1867), when woodblock printing became comparatively affordable and widespread. Movable-type printing had been used from the late 16th century, but for various aesthetic and practical reasons woodblock printing and hand-copied remained dominant until much later. Japanese equivalents for "book" include (hon) and 書籍 (shoseki). The former term indicates only bound books, and does not include scrolls. The latter is used for printed matter only. The most general term is 書物 (shomotsu), which means all written or printed matter that has been collected into a single unit, regardless of construction.

Coated paper is paper that has been coated by a mixture of materials or a polymer to impart certain qualities to the paper, including weight, surface gloss, smoothness, or reduced ink absorbency. Various materials, including kaolinite, calcium carbonate, bentonite, and talc, can be used to coat paper for high-quality printing used in the packaging industry and in magazines.

<span class="mw-page-title-main">Kawasaki's theorem</span> Description of flat one-vertex origami

Kawasaki's theorem or Kawasaki–Justin theorem is a theorem in the mathematics of paper folding that describes the crease patterns with a single vertex that may be folded to form a flat figure. It states that the pattern is flat-foldable if and only if alternatingly adding and subtracting the angles of consecutive folds around the vertex gives an alternating sum of zero. Crease patterns with more than one vertex do not obey such a simple criterion, and are NP-hard to fold.

<span class="mw-page-title-main">Bookbinding</span> Process of assembling a book

Bookbinding is the process of building a book of codex manuscripts from an ordered stack of paper sheets with one's hands and tools. Firstly, one binds the sheets of papers along an edge with a thick needle and strong thread. One can also use loose-leaf rings, binding posts, twin-loop spine coils, plastic spiral coils, and plastic spine combs, but they last for a shorter time. Next, one encloses the bound stack of paper in a cover. Finally, one places an attractive cover onto the boards, and features the publisher's information and artistic decorations.

<span class="mw-page-title-main">Bradford Industrial Museum</span> Industrial museum, Mill museum, Textile museum, in Eccleshill, Bradford

Bradford Industrial Museum, established 1974 in Moorside Mills, Eccleshill, Bradford, United Kingdom, specializes in relics of local industry, especially printing and textile machinery, kept in working condition for regular demonstrations to the public. There is a Horse Emporium in the old canteen block plus a shop in the mill, and entry is free of charge.

<span class="mw-page-title-main">Emile Doo's Chemist Shop</span> Historical exhibition

Emile Doo's Chemist Shop is an exhibition at the Black Country Living Museum in England. It was originally situated at 358 Halesowen Road, Netherton, before being rebuilt on the museum site.

<span class="mw-page-title-main">Zero Tolerance Knives</span>

Zero Tolerance Knives (ZT Knives) is a knife brand of Kai USA, headquartered in Tualatin, Oregon, United States. Both Zero Tolerance and Kai USA are members of the Kai Group, a global cutlery company.

In the mathematics of paper folding, the big-little-big lemma is a necessary condition for a crease pattern with specified mountain folds and valley folds to be able to be folded flat. It differs from Kawasaki's theorem, which characterizes the flat-foldable crease patterns in which a mountain-valley assignment has not yet been made. Together with Maekawa's theorem on the total number of folds of each type, the big-little-big lemma is one of the two main conditions used to characterize the flat-foldability of mountain-valley assignments for crease patterns that meet the conditions of Kawasaki's theorem. Mathematical origami expert Tom Hull calls the big-little-big lemma "one of the most basic rules" for flat foldability of crease patterns.

References

  1. 1 2 Patricia Lockhart Fleming (2004). "The Binding Trades". In Patricia Lockhart Fleming and Yvan Lamonde (ed.). History of the Book in Canada. Vol. 2: 1840–1918. University of Toronto Press. p. 101. ISBN   978-0-8020-8012-7.
  2. 1 2 3 4 5 6 7 "Folding". International Paper Knowledge Center. International Paper Company. Archived from the original on 15 May 2010. Retrieved 7 October 2010.
  3. Nicole Howard (September 2005). The book: the life story of a technology. Greenwood Publishing Group. pp. 63–. ISBN   978-0-313-33028-5 . Retrieved 8 January 2012.
  4. Rose Gonnella; Christopher J. Navetta (2 July 2010). Comp It Up: A Studio Skills Foundation. Cengage Learning. pp. 3–. ISBN   978-1-4283-2235-6 . Retrieved 8 January 2012.
  5. "All You Need to Know About Paper Folding Machines".

"Folded Book Art & Patterns For Sale and Free from BookFolding.net". BookFolding.net. Retrieved 2018-05-29.