Burlington Northern Railroad Bridge 9.6 | |
---|---|
Coordinates | 45°37′29″N122°41′27″W / 45.6247°N 122.6908°W |
Carries | Freight and passenger trains |
Crosses | Columbia River |
Locale | Portland, Oregon; Vancouver, Washington |
Other name(s) | BNSF Railway Bridge 9.6, Columbia River Railroad Bridge (at Portland) |
Owner | BNSF Railway |
Characteristics | |
Design | Swing bridge, Pratt truss |
Total length | 2,807 feet (856 m) [1] |
Height | 136.154 ft (41 m) [2] |
Longest span | 467 feet (142 m) [3] [4] |
Piers in water | 9 |
Clearance below | 33 feet (10 m) |
Rail characteristics | |
No. of tracks | 2 |
History | |
Construction start | February 8, 1906 |
Construction end | July 24, 1908 |
Opened | November 17, 1908 |
Statistics | |
Daily traffic | 63 freight, 10 Amtrak per day (as of 1998 [update] ) [5] |
Location | |
Burlington Northern Railroad Bridge 9.6 or BNSF Railway Bridge 9.6, [3] also known as the Columbia River Railroad Bridge, [4] is through truss railway bridge across the Columbia River, between Portland, Oregon, and Vancouver, Washington, owned and operated by BNSF Railway. [3] Built by the Spokane, Portland and Seattle Railway (SP&S) and completed in 1908, it was the first bridge of any kind to be built across the lower Columbia River, [1] preceding the first road bridge, the nearby Interstate Bridge, by a little more than eight years.
The 2,807-foot-long (856 m) [1] bridge has a swing span, which pivots on its base to allow for the passage of taller ships. The bridge carries two railroad tracks, which are used by BNSF, Union Pacific Railroad, and Amtrak. It is one of only two surviving swing-span bridges in the Portland metropolitan area, which once had several bridges of that type. [3] The other survivor is another BNSF bridge located nearby, on the same line and built at the same time, the Oregon Slough Railroad Bridge (also known as BNSF Railway Bridge 8.8). [3] The 9.6 in the name is the distance, in miles, from Portland's Union Station, the same as for Bridge 5.1 (across the Willamette River) and Bridge 8.8 on the same line. [3]
Construction of a single-track railroad bridge at the same location was started in 1890, engineered by George S. Morison [1] for the Portland & Puget Sound Railroad Company [6] (affiliated with Union Pacific), but that project was abandoned at an early stage. [1] In 1905, another crossing of the Columbia River was proposed, this time by the Northern Pacific Railway (NP), for use by the newly formed Portland & Seattle Railway. The Portland & Seattle had been formed jointly by NP and Great Northern Railway, [7] to build and ultimately operate new railroad lines from Portland to Seattle and Portland to Spokane, but was renamed Spokane, Portland & Seattle Railway (SP&S) – in early 1908, [8] before opening any track sections – after construction of the Portland–Spokane line got under way before the Seattle line. [9] The planned new railroad was commonly referred to as the "North Bank road" [4] [7] (road being short for railroad or railroad line), or North Bank line, because the Seattle line would follow the Columbia River's north bank as far as Kelso and the Spokane line would also follow the north bank, running east from Vancouver. East from Portland, the south bank of the Columbia already had a rail line, owned by the Oregon Railroad and Navigation Company (later absorbed by Union Pacific Railroad).
The bridge was part of an overall planned new line from Vancouver to Northwest Portland, which included three major new bridges: the Columbia River Bridge, Oregon Slough Bridge and Willamette Drawbridge. Northern Pacific hired bridge builder Ralph Modjeski to design all three. [4] [10] On November 14, 1905, the SP&S board approved Modjeski's recommendations. Plans for the bridges were submitted to the War Department, and eventually approved in February 1906. [4] Pier 2 of the Columbia River bridge, the pier on which the swing-span section pivots, was built as part of the canceled 1890 project, and was incorporated into the plans for the 1906 bridge. [1] [10]
The first work was performed on February 8, 1906, when work crews began framing the caissons. The steel was fabricated by the American Bridge Company of New York. Construction took approximately 26 months. Steel construction at the site began on June 15, 1907. [1] Structural work on the bridge was completed in June 1908, [1] but its opening to traffic was delayed by problems concerning installation of the heavy machinery required to turn the huge swing span on the new Willamette River bridge located on the same line. [11] The span was the first bridge of any kind to be built across the lower Columbia River, [1] preceding the first road bridge, the nearby Interstate Bridge, by a little more than eight years.
The first train crossed the span on October 23, 1908, [12] and the bridge opened for regular use in November 1908. [13] This completed the initial SP&S route, between Portland and Pasco.
Ownership and operation of the bridge passed to the Burlington Northern Railroad (BN) in 1970, when SP&S, Northern Pacific and other railroads merged to form BN. At the end of 1996, BN merged with the Atchison, Topeka and Santa Fe Railway (Santa Fe), becoming the Burlington Northern and Santa Fe Railway [14] (officially shortened to BNSF Railway in 2005).
The swing span is located at the bridge's north end, in Washington, a short distance from the Vancouver Amtrak station. All trains using the bridge are required to call the bridge tender to obtain permission to cross. [15] A bridge tender is on duty 24 hours a day, year-round. [16] Boats requesting an opening should contact the bridge over VHF channel 13 using call sign KQ 9049.
The bridge's swing span is opened for river traffic an average of 12 times per day. [16]
Wishram is an unincorporated community and census-designated place (CDP) in Klickitat County, Washington, United States. The population was 366 at the 2020 census. The site of the historic Celilo Falls is nearby.
The Great Northern Railway was an American Class I railroad. Running from Saint Paul, Minnesota, to Seattle, Washington, it was the creation of 19th-century railroad entrepreneur James J. Hill and was developed from the Saint Paul & Pacific Railroad. The Great Northern's route was the northernmost transcontinental railroad route in the U.S.
The Burlington Northern Railroad was a United States-based railroad company formed from a merger of four major U.S. railroads. Burlington Northern operated between 1970 and 1995.
The Steel Bridge is a through truss, double-deck vertical-lift bridge across the Willamette River in Portland, Oregon, United States, opened in 1912. Its lower deck carries railroad and bicycle/pedestrian traffic, while the upper deck carries road traffic, and light rail (MAX), making the bridge one of the most multimodal in the world. It is the only double-deck bridge with independent lifts in the world and the second oldest vertical-lift bridge in North America, after the nearby Hawthorne Bridge. The bridge links the Rose Quarter and Lloyd District in the east to Old Town Chinatown neighborhood in the west.
The Oregon Electric Railway (OE) was an interurban railroad line in the U.S. state of Oregon that linked Portland to Eugene.
A swing bridge is a movable bridge that can be rotated horizontally around a vertical axis. It has as its primary structural support a vertical locating pin and support ring, usually at or near to its center of gravity, about which the swing span can then pivot horizontally as shown in the animated illustration to the right.
The BNSF Railway Bridge 5.1, also known as the St. Johns Railroad Bridge or the Willamette River Railroad Bridge, is a through truss railway bridge with a vertical lift that spans the Willamette River in Portland, Oregon, United States. Built by the Spokane, Portland and Seattle Railway (SP&S) and completed in 1908, it was originally a swing-span bridge, and its swing-span section was the longest in the world at the time. However, 81 years later the main span was converted from a swing-type to a vertical-lift type, in order to widen the navigation channel. The lift span is one of the highest and longest in the world. The bridge consists of five sections, with the two sections closest to the bank on each side fixed.
The Spokane, Portland & Seattle Railway was a railroad in the northwest United States. Incorporated in 1905, it was a joint venture by the Great Northern Railway and the Northern Pacific Railway to build a railroad along the north bank of the Columbia River. The railroad later built or acquired other routes in Oregon. The SP&S was merged into the Burlington Northern in March, 1970. Remnants of the line are currently operated by BNSF Railway and the Portland and Western Railroad.
The North Coast Limited was a named passenger train operated by the Northern Pacific Railway between Chicago and Seattle via Bismarck, North Dakota. It started on April 29, 1900, and continued as a Burlington Northern Railroad train after the merger on March 2, 1970 with Great Northern Railway and the Chicago, Burlington and Quincy Railroad. The next year, it ceased operations after the trains which left their originating stations on April 30, 1971, the day before Amtrak began service, arrived at their destinations.
The Portland and Western Railroad is a 516-mile (830 km) Class II railroad serving the U.S. state of Oregon, and is a wholly owned subsidiary of shortline and regional railroad holding company Genesee & Wyoming Inc. The PNWR includes a subsidiary, the Willamette and Pacific Railroad.
Spokane, Portland & Seattle 700 is the oldest and only surviving example of the class "E-1" 4-8-4 "Northern" type steam locomotive and the only surviving "original" Spokane, Portland and Seattle Railway steam locomotive. It was built by the Baldwin Locomotive Works in May 1938. Nearly identical to the class "A-3" Northerns built for Northern Pacific Railway, it burns oil instead of coal.
Youngs Bay, or Youngs River Bay, is located in the northwestern corner of the U.S. state of Oregon. The Youngs River meets the Columbia River at this point, which is situated between Astoria and Warrenton.
The Northern Transcon, a route operated by the BNSF Railway, traverses the most northerly route of any railroad in the western United States. This route was originally part of the Chicago, Burlington and Quincy Railroad, Northern Pacific Railway, Great Northern Railway and Spokane, Portland and Seattle Railway systems, merged into the Burlington Northern Railroad system in 1970.
The Oregon Trunk Rail Bridge or Celilo Bridge is a single-track railroad bridge opened in 1912 over the Columbia River in the Pacific Northwest of the United States. It consists of eight steel truss spans and several deck girder spans, and since 1957 it has included a vertical-lift section. The bridge was designed by engineer Ralph Modjeski and erected by the Missouri Valley Bridge & Iron Co., of Leavenworth, Kansas.
Rail transportation is an important element of the transportation network in the U.S. state of Oregon. Rail transportation has existed in Oregon in some form since 1855, and the state was a pioneer in development of electric railway systems. While the automobile has displaced many uses of rail in the state, rail remains a key means of moving passengers and freight, both within the state and to points beyond its borders.
The SP&S Class A-1 steam locomotives were a group of 5 identical locomotives. They were used in the rail yards at Portland, Oregon, and Vancouver, Washington, from 1907 to 1952. They were replaced with diesel-electric switch locomotives.
The North Bank Depot Buildings, in central Portland, Oregon, United States, are a pair of buildings formerly used as a freight warehouse and passenger terminal for the Spokane, Portland and Seattle Railway (SP&S). Formed in 1905, the SP&S was commonly known as the North Bank Road during the period in which these buildings were in use. The Portland buildings' passenger facilities were also used by the Oregon Electric Railway after that railway was acquired by the SP&S. Located in what is now known as the Pearl District, the buildings were listed on the National Register of Historic Places in 1996. They were in use by the SP&S and its successor, Burlington Northern Railroad, from 1908 until the 1980s. Only the east building was used as a passenger station, and this usage lasted from 1908 until 1931.
The Oregon Slough Railroad Bridge, also known as the BNSF Railway Bridge 8.8, is a swing-span, through truss bridge in Portland, Oregon, United States. Currently owned and operated by BNSF Railway, it crosses an anabranch of the Columbia River known as North Portland Harbor and historically as the Oregon Slough. The bridge's northern end is on Hayden Island, which, along with Tomahawk Island, forms the north shore of the channel. Completed in 1908, the two-track bridge is one of only two swing bridges surviving in Portland, which once had several bridges of that type, both for road and rail traffic. The only other remaining swing bridge in the Portland area is another rail-only bridge on the same line, BNSF's nearby Bridge 9.6, spanning the Columbia River.
The Crooked River Railroad Bridge, part of a BNSF Railway line between the Columbia River and Bend, Oregon, crosses Oregon's Crooked River Canyon in southern Jefferson County. The bridge is 320 feet (98 m) above the river and when it was completed in 1911, it was the second-highest railroad bridge in the United States. It is a steel two-hinge arch span with a total length of 460 feet (140 m).
Bonita was a steamboat which operated on the Willamette and Yamhill rivers. This boat was renamed Metlako in 1902, and operated under that name until 1924 on the Columbia River and its tributaries, the Cowlitz, Lewis and Lake rivers. In 1924, Metlako was renamed B. H. Smith Jr., operating under that name until 1931, when the steamer was abandoned. As Bonita, in September 1900, this vessel was the first steamer to pass through the Yamhill locks.