CALPUFF

Last updated

CALPUFF is an advanced, integrated Lagrangian puff modeling system for the simulation of atmospheric pollution dispersion distributed by the Atmospheric Studies Group at TRC Solutions. [1]

Contents

It is maintained by the model developers and distributed by TRC. The model has been adopted by the United States Environmental Protection Agency (EPA) in its Guideline on Air Quality Models [2] as a preferred model for assessing long range transport of pollutants and their impacts on Federal Class I areas and on a case-by-case basis for certain near-field applications involving complex meteorological conditions.

The integrated modeling system consists of three main components and a set of preprocessing and postprocessing programs. The main components of the modeling system are CALMET (a diagnostic 3-dimensional meteorological model), CALPUFF (an air quality dispersion model), and CALPOST (a postprocessing package). Each of these programs has a graphical user interface (GUI). In addition to these components, there are numerous other processors that may be used to prepare geophysical (land use and terrain) data in many standard formats, meteorological data (surface, upper air, precipitation, and buoy data), and interfaces to other models such as the Penn State/NCAR Mesoscale Model (MM5), the National Centers for Environmental Prediction (NCEP) Eta model and the RAMS meteorological model.

The CALPUFF model is designed to simulate the dispersion of buoyant, puff or continuous point and area pollution sources as well as the dispersion of buoyant, continuous line sources. The model also includes algorithms for handling the effect of downwash by nearby buildings in the path of the pollution plumes. [3]

History

The CALPUFF model was originally developed by the Sigma Research Corporation (SRC) in the late 1980s under contract with the California Air Resources Board (CARB) [3] and it was first issued in about 1990. [4]

The Sigma Research Corporation subsequently became part of Earth Tech, Inc. After the US EPA designated CALPUFF as a preferred model in their Guideline on Air Quality Models, Earth Tech served as the designated distributor of the model.

In April 2006, ownership of the model switched from Earth Tech to the TRC Environmental Corporation. More recently ownership transferred to Exponent, [5] who are currently (December 2015) responsible for maintaining and distributing the model. [1]

See also

Related Research Articles

<span class="mw-page-title-main">Environmental engineering</span> Integration of sciences and engineering principles to improve the natural environment for life

Environmental engineering is a professional engineering discipline related to environmental science. It encompasses broad scientific topics like chemistry, biology, ecology, geology, hydraulics, hydrology, microbiology, and mathematics to create solutions that will protect and also improve the health of living organisms and improve the quality of the environment. Environmental engineering is a sub-discipline of civil engineering and chemical engineering. While on the part of civil engineering, the Environmental Engineering is focused mainly on Sanitary Engineering.

<span class="mw-page-title-main">Finnish Meteorological Institute</span>

The Finnish Meteorological Institute is the government agency responsible for gathering and reporting weather data and forecasts in Finland. It is a part of the Ministry of Transport and Communications but it operates semi-autonomously.

<span class="mw-page-title-main">Norwegian Institute for Air Research</span>

The NILU – Norwegian Institute for Air Research or NILU is one of the leading specialized scientific laboratories in Europe researching issues related to air pollution, climate change and health. It is an independent nonprofit institution, established in 1969, staffed by scientists, engineers and technicians with specialized expertise for working on air pollution problems. The staff do more than two hundred projects annually for research councils, industries, international banks and local, national and international authorities and organizations. Its first director was Brynjulf Ottar.

<span class="mw-page-title-main">Atmospheric dispersion modeling</span> Mathematical simulation of how air pollutants disperse in the ambient atmosphere

Atmospheric dispersion modeling is the mathematical simulation of how air pollutants disperse in the ambient atmosphere. It is performed with computer programs that include algorithms to solve the mathematical equations that govern the pollutant dispersion. The dispersion models are used to estimate the downwind ambient concentration of air pollutants or toxins emitted from sources such as industrial plants, vehicular traffic or accidental chemical releases. They can also be used to predict future concentrations under specific scenarios. Therefore, they are the dominant type of model used in air quality policy making. They are most useful for pollutants that are dispersed over large distances and that may react in the atmosphere. For pollutants that have a very high spatio-temporal variability and for epidemiological studies statistical land-use regression models are also used.

<span class="mw-page-title-main">Royal Netherlands Meteorological Institute</span> Research institute

The Royal Dutch Meteorological Institute is the Dutch national weather forecasting service, which has its headquarters in De Bilt, in the province of Utrecht, central Netherlands.

<span class="mw-page-title-main">Air Quality Modeling Group</span>

The Air Quality Modeling Group (AQMG) is in the U.S. EPA's Office of Air and Radiation (OAR) and provides leadership and direction on the full range of air quality models, air pollution dispersion models and other mathematical simulation techniques used in assessing pollution control strategies and the impacts of air pollution sources.

<span class="mw-page-title-main">Roadway air dispersion modeling</span>

Roadway air dispersion modeling is the study of air pollutant transport from a roadway or other linear emitter. Computer models are required to conduct this analysis, because of the complex variables involved, including vehicle emissions, vehicle speed, meteorology, and terrain geometry. Line source dispersion has been studied since at least the 1960s, when the regulatory framework in the United States began requiring quantitative analysis of the air pollution consequences of major roadway and airport projects. By the early 1970s this subset of atmospheric dispersion models was being applied to real-world cases of highway planning, even including some controversial court cases.

The National Atmospheric Release Advisory Center (NARAC) is located at the University of California's Lawrence Livermore National Laboratory. It is a national support and resource center for planning, real-time assessment, emergency response, and detailed studies of incidents involving a wide variety of hazards, including nuclear, radiological, chemical, biological, and natural emissions.

The ADMS 3 is an advanced atmospheric pollution dispersion model for calculating concentrations of atmospheric pollutants emitted both continuously from point, line, volume and area sources, or intermittently from point sources. It was developed by Cambridge Environmental Research Consultants (CERC) of the UK in collaboration with the UK Meteorological Office, National Power plc and the University of Surrey. The first version of ADMS was released in 1993. The version of the ADMS model discussed on this page is version 3 and was released in February 1999. It runs on Microsoft Windows. The current release, ADMS 5 Service Pack 1, was released in April 2013 with a number of additional features.

<span class="mw-page-title-main">AERMOD</span>

The AERMOD atmospheric dispersion modeling system is an integrated system that includes three modules:

NAME atmospheric pollution dispersion model was first developed by the UK's Met Office in 1986 after the nuclear accident at Chernobyl, which demonstrated the need for a method that could predict the spread and deposition of radioactive gases or material released into the atmosphere.

DISPERSION21 is a local scale atmospheric pollution dispersion model developed by the air quality research unit at Swedish Meteorological and Hydrological Institute (SMHI), located in Norrköping.

<i>Fundamentals of Stack Gas Dispersion</i>

Fundamentals of Stack Gas Dispersion is a book devoted to the fundamentals of air pollution dispersion modeling of continuous, buoyant pollution plumes from stationary point sources. The first edition was published in 1979. The current fourth edition was published in 2005.

In environmental science, air pollution dispersion is the distribution of air pollution into the atmosphere. Air pollution is the introduction of particulates, biological molecules, or other harmful materials into Earth's atmosphere, causing disease, death to humans, damage to other living organisms such as food crops, and the natural or built environment. Air pollution may come from anthropogenic or natural sources. Dispersion refers to what happens to the pollution during and after its introduction; understanding this may help in identifying and controlling it.

ISC3 (Industrial Source Complex) model is a popular steady-state Gaussian plume model which can be used to assess pollutant concentrations from a wide variety of sources associated with an industrial complex.

SAFE AIR is an advanced atmospheric pollution dispersion model for calculating concentrations of atmospheric pollutants emitted both continuously or intermittently from point, line, volume and area sources. It adopts an integrated Gaussian puff modeling system. SAFE AIR consists of three main parts: the meteorological pre-processor WINDS to calculate wind fields, the meteorological pre-processor ABLE to calculate atmospheric parameters and a lagrangian multisource model named P6 to calculate pollutant dispersion. SAFE AIR is included in the online Model Documentation System (MDS) of the European Environment Agency (EEA) and of the Italian Agency for the Protection of the Environment (APAT).

A chemical transport model (CTM) is a type of computer numerical model which typically simulates atmospheric chemistry and may give air pollution forecasting.

The Hybrid Single-Particle Lagrangian Integrated Trajectory model (HYSPLIT) is a computer model that is used to compute air parcel trajectories to determine how far and in what direction a parcel of air, and subsequently air pollutants, will travel. HYSPLIT is also capable of calculating air pollutant dispersion, chemical transformation, and deposition. The HYSPLIT model was developed by the National Oceanic and Atmospheric Administration (NOAA) Air Resources Laboratory and the Australian Bureau of Meteorology Research Centere in 1998. The model derives its name from the usage of both Lagrangian and Eulerian approaches.

WindStation is a wind energy software which uses computational fluid dynamics (CFD) to conduct wind resource assessments in complex terrain. The physical background and its numerical implementation are described in. and the official manual of the software.

References

  1. 1 2 "CALPUFF Status and Update" (PDF).
  2. ↑ Appendix W of 40 Code of Federal Regulations (CFR) Part 51
  3. 1 2 "General and Specific Characteristics of the model" (PDF). Archived from the original (PDF) on August 6, 2006.
  4. ↑ "Model Formulation and Users Guide for the CALPUFF model, May 1990" (PDF).
  5. ↑ "Official CALPUFF Modeling System". src.com.

Further reading

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.