North American Ensemble Forecast System

Last updated

The North American Ensemble Forecast System (NAEFS) is a joint project involving the Meteorological Service of Canada (MSC) in Canada, the National Weather Service (NWS) in the United States, and the National Meteorological Service of Mexico (NMSM) in Mexico providing numerical weather prediction ensemble guidance for the 1- to 16-day forecast period. [1] The NAEFS combines the Canadian MSC (Global Environmental Multiscale Model) and the US NWS global ensemble prediction systems (Global Forecast System), improving probabilistic operational guidance over what can be built from any individual country's ensemble. [1] Model guidance from the NAEFS is incorporated into the forecasts of the respective national agencies. [2] [3]

Contents

NAEFS operates on the fundamental principles of ensemble forecasting which provides a range of possible weather forecasts of the atmospheric state over a given forecast period. The initial state of the atmosphere and/or the numerical weather prediction model configuration are slightly varied to provide a range of possible forecast solutions. [4] [5] The global ensemble prediction systems at MSC and NWS use slightly different, but equally valid methods to initialize and integrate the atmospheric state. By combining the ensembles from both centers into one ensemble, the possible range of future atmospheric states for a given forecast period are better sampled, producing on average, improved estimates of the future atmospheric state and the associated uncertainty. [6] [7] [8] NAEFS collaboration allows the national weather agencies to pool their research resources and make improvements to the ensemble prediction systems more quickly and efficiently. The exchange of knowledge allows research and operations to develop a new generation of ensemble products with the goal of improving timeliness and accuracy in alerting the public of high impact weather events.

History

Officials from the MSC and the NWS first met in February 2003 to discuss building a joint ensemble prediction system. In May 2003, weather modeling experts from Canada and the U.S. held a workshop to start planning the research, development, and operational implementation of the NAEFS. The initial NAEFS development plan was completed in October 2003. Intensive work for the Initial Operational Capability implementation then began, and was successfully completed on schedule in September 2004. NAEFS was launched in November 2004 in the presence of representatives of the three countries. [1]

Technical details

The NAEFS constituent ensemble prediction systems and post-processing techniques are continually upgraded to include improved scientific understanding of atmospheric phenomenon, advances in computational methods, and advances in computing, among other reasons. Implementation changes to the NWS global ensemble prediction system (GEFS), global forecast model (GFS) configuration and NWS NAEFS post-processed products can be found at the NWS National Centers for Environmental Prediction Central Operations website. The NWS provides global and downscaled (CONUS and Alaska) and MSC provides global post-processed model guidance on various standard pressure-levels.

NAEFS configuration as of April 2016
NAEFS
ModelsNWS Global Forecasting System (GFS) +

MSC Global Environmental Multiscale Model (GEM)

Daily Frequency0000 UTC and 1200 UTC
Forecast Length16 days
Initial Condition UncertaintyEnsemble Kalman Filter (EnKF) [9]
Control1 NWS + 1 MSC
Ensemble Members40 (20 NWS + 20 MSC) for each cycle
Post-Processed Probabilistic

Products

mean, mode, standard deviation,

and probabilities (10%, 50%, 90%)

Post-Processed Probabilistic

Product Resolution

NWS/MSC: 1° x 1° global products

NWS: downscaled CONUS 2.5 km, Alaska 3 km

Research use

NAEFS has been the subject of meteorological research. [8] [10] [11] [12] A few such research studies have compared NAEFS with the THORPEX Interactive Grand Global Ensemble (TIGGE), a part of THORPEX, an initiative of the World Meteorological Organization to determine whether combining them can yield even better forecasts than either one individually. [12] [13]

See also

Related Research Articles

<span class="mw-page-title-main">National Hurricane Center</span> Division of the United States National Weather Service

The National Hurricane Center (NHC) is the division of the United States' NOAA/National Weather Service responsible for tracking and predicting tropical weather systems between the Prime Meridian and the 140th meridian west poleward to the 30th parallel north in the northeast Pacific Ocean and the 31st parallel north in the northern Atlantic Ocean. The agency, which is co-located with the Miami branch of the National Weather Service, is situated on the campus of Florida International University in Westchester, Florida.

<span class="mw-page-title-main">Weather Prediction Center</span> United States weather agency

The Weather Prediction Center (WPC), located in College Park, Maryland, is one of nine service centers under the umbrella of the National Centers for Environmental Prediction (NCEP), a part of the National Weather Service (NWS), which in turn is part of the National Oceanic and Atmospheric Administration (NOAA) of the U.S. Government. Until March 5, 2013 the Weather Prediction Center was known as the Hydrometeorological Prediction Center (HPC). The Weather Prediction Center serves as a center for quantitative precipitation forecasting, medium range forecasting, and the interpretation of numerical weather prediction computer models.

<span class="mw-page-title-main">Numerical weather prediction</span> Weather prediction using mathematical models of the atmosphere and oceans

Numerical weather prediction (NWP) uses mathematical models of the atmosphere and oceans to predict the weather based on current weather conditions. Though first attempted in the 1920s, it was not until the advent of computer simulation in the 1950s that numerical weather predictions produced realistic results. A number of global and regional forecast models are run in different countries worldwide, using current weather observations relayed from radiosondes, weather satellites and other observing systems as inputs.

<span class="mw-page-title-main">Ensemble forecasting</span> Multiple simulation method for weather forecasting

Ensemble forecasting is a method used in or within numerical weather prediction. Instead of making a single forecast of the most likely weather, a set of forecasts is produced. This set of forecasts aims to give an indication of the range of possible future states of the atmosphere. Ensemble forecasting is a form of Monte Carlo analysis. The multiple simulations are conducted to account for the two usual sources of uncertainty in forecast models: (1) the errors introduced by the use of imperfect initial conditions, amplified by the chaotic nature of the evolution equations of the atmosphere, which is often referred to as sensitive dependence on initial conditions; and (2) errors introduced because of imperfections in the model formulation, such as the approximate mathematical methods to solve the equations. Ideally, the verified future atmospheric state should fall within the predicted ensemble spread, and the amount of spread should be related to the uncertainty (error) of the forecast. In general, this approach can be used to make probabilistic forecasts of any dynamical system, and not just for weather prediction.

Data assimilation is a mathematical discipline that seeks to optimally combine theory with observations. There may be a number of different goals sought – for example, to determine the optimal state estimate of a system, to determine initial conditions for a numerical forecast model, to interpolate sparse observation data using knowledge of the system being observed, to set numerical parameters based on training a model from observed data. Depending on the goal, different solution methods may be used. Data assimilation is distinguished from other forms of machine learning, image analysis, and statistical methods in that it utilizes a dynamical model of the system being analyzed.

<span class="mw-page-title-main">Bred vector</span>

In applied mathematics, bred vectors are perturbations, related to Lyapunov vectors, that capture fast-growing dynamical instabilities of the solution of a numerical model. They are used, for example, as initial perturbations for ensemble forecasting in numerical weather prediction. They were introduced by Zoltan Toth and Eugenia Kalnay.

<span class="mw-page-title-main">Global Forecast System</span>

The Global Forecast System (GFS) is a global numerical weather prediction system containing a global computer model and variational analysis run by the United States' National Weather Service (NWS).

<span class="mw-page-title-main">Tropical cyclone forecast model</span> Computer program that uses meteorological data to forecast tropical cyclones

A tropical cyclone forecast model is a computer program that uses meteorological data to forecast aspects of the future state of tropical cyclones. There are three types of models: statistical, dynamical, or combined statistical-dynamic. Dynamical models utilize powerful supercomputers with sophisticated mathematical modeling software and meteorological data to calculate future weather conditions. Statistical models forecast the evolution of a tropical cyclone in a simpler manner, by extrapolating from historical datasets, and thus can be run quickly on platforms such as personal computers. Statistical-dynamical models use aspects of both types of forecasting. Four primary types of forecasts exist for tropical cyclones: track, intensity, storm surge, and rainfall. Dynamical models were not developed until the 1970s and the 1980s, with earlier efforts focused on the storm surge problem.

<span class="mw-page-title-main">Atmospheric model</span>

An atmospheric model is a mathematical model constructed around the full set of primitive dynamical equations which govern atmospheric motions. It can supplement these equations with parameterizations for turbulent diffusion, radiation, moist processes, heat exchange, soil, vegetation, surface water, the kinematic effects of terrain, and convection. Most atmospheric models are numerical, i.e. they discretize equations of motion. They can predict microscale phenomena such as tornadoes and boundary layer eddies, sub-microscale turbulent flow over buildings, as well as synoptic and global flows. The horizontal domain of a model is either global, covering the entire Earth, or regional (limited-area), covering only part of the Earth. The different types of models run are thermotropic, barotropic, hydrostatic, and nonhydrostatic. Some of the model types make assumptions about the atmosphere which lengthens the time steps used and increases computational speed.

<span class="mw-page-title-main">Weather Research and Forecasting Model</span> Numerical weather prediction system

The Weather Research and Forecasting (WRF) Model is a numerical weather prediction (NWP) system designed to serve both atmospheric research and operational forecasting needs. NWP refers to the simulation and prediction of the atmosphere with a computer model, and WRF is a set of software for this. WRF features two dynamical (computational) cores, a data assimilation system, and a software architecture allowing for parallel computation and system extensibility. The model serves a wide range of meteorological applications across scales ranging from meters to thousands of kilometers.

In weather forecasting, model output statistics (MOS) is a multiple linear regression technique in which predictands, often near-surface quantities, are related statistically to one or more predictors. The predictors are typically forecasts from a numerical weather prediction (NWP) model, climatic data, and, if applicable, recent surface observations. Thus, output from NWP models can be transformed by the MOS technique into sensible weather parameters that are familiar to a layperson.

<span class="mw-page-title-main">Wind wave model</span> Numerical modelling of the sea state

In fluid dynamics, wind wave modeling describes the effort to depict the sea state and predict the evolution of the energy of wind waves using numerical techniques. These simulations consider atmospheric wind forcing, nonlinear wave interactions, and frictional dissipation, and they output statistics describing wave heights, periods, and propagation directions for regional seas or global oceans. Such wave hindcasts and wave forecasts are extremely important for commercial interests on the high seas. For example, the shipping industry requires guidance for operational planning and tactical seakeeping purposes.

An atmospheric reanalysis is a meteorological and climate data assimilation project which aims to assimilate historical atmospheric observational data spanning an extended period, using a single consistent assimilation scheme throughout.

<span class="mw-page-title-main">Eugenia Kalnay</span> Argentine meteorologist

Eugenia Enriqueta Kalnay is an Argentine meteorologist and a Distinguished University Professor of Atmospheric and Oceanic Science, which is part of the University of Maryland College of Computer, Mathematical, and Natural Sciences at the University of Maryland, College Park in the United States.

<span class="mw-page-title-main">History of numerical weather prediction</span> Aspect of meteorological history

The history of numerical weather prediction considers how current weather conditions as input into mathematical models of the atmosphere and oceans to predict the weather and future sea state has changed over the years. Though first attempted manually in the 1920s, it was not until the advent of the computer and computer simulation that computation time was reduced to less than the forecast period itself. ENIAC was used to create the first forecasts via computer in 1950, and over the years more powerful computers have been used to increase the size of initial datasets as well as include more complicated versions of the equations of motion. The development of global forecasting models led to the first climate models. The development of limited area (regional) models facilitated advances in forecasting the tracks of tropical cyclone as well as air quality in the 1970s and 1980s.

The Climate Forecast System or coupled forecast system is a medium to long range numerical weather prediction and a climate model run by the National Centers for Environmental Prediction (NCEP) to bridge weather and climate timescales. Version 2 became operational as CFSv2 in 2011.

THORPEX is an international research programme established in 2003 by the World Meteorological Organization to accelerate improvements in the utility and accuracy of weather forecasts up to two weeks ahead. It is part of the World Weather Research Programme and is a key component of the WMO Natural Disaster Reduction and Mitigation Programme.

The THORPEX Interactive Grand Global Ensemble (TIGGE) is an implementation of ensemble forecasting for global weather forecasting and is part of THORPEX, an international research programme established in 2003 by the World Meteorological Organization to accelerate improvements in the utility and accuracy of weather forecasts up to two weeks ahead.

The Community Earth System Model (CESM) is a fully coupled numerical simulation of the Earth system consisting of atmospheric, ocean, ice, land surface, carbon cycle, and other components. CESM includes a climate model providing state-of-art simulations of the Earth's past, present, and future. It is the successor of the Community Climate System Model (CCSM), specifically version 4 (CCSMv4), which provided the initial atmospheric component for CESM. Strong ensemble forecasting capabilities, CESM-LE, were developed at the onset to control for error and biases across different model runs (realizations). Simulations from the Earth's surface through the thermosphere are generated utilizing the Whole Atmosphere Community Climate Model (WACCM). CESM1 was released in 2010 with primary development by the Climate and Global Dynamics Division (CGD) of the National Center for Atmospheric Research (NCAR), and significant funding by the National Science Foundation (NSF) and the Department of Energy (DoE).

CICE is a computer model that simulates the growth, melt and movement of sea ice. It has been integrated into many coupled climate system models as well as global ocean and weather forecasting models and is often used as a tool in Arctic and Southern Ocean research. CICE development began in the mid-1990s by the United States Department of Energy (DOE), and it is currently maintained and developed by a group of institutions in North America and Europe known as the CICE Consortium. Its widespread use in earth system science in part owes to the importance of sea ice in determining Earth's planetary albedo, the strength of the global thermohaline circulation in the world's oceans, and in providing surface boundary conditions for atmospheric circulation models, since sea ice occupies a significant proportion (4-6%) of earth's surface. CICE is a type of cryospheric model.

References

  1. 1 2 3 "North American Ensemble Forecast System (NAEFS)". Weather (Canada). Retrieved April 19, 2014.
  2. ↑ "NCEP Central Operations". National Weather Service . Retrieved April 19, 2014.
  3. ↑ "Temperature Anomaly Forecast: Day 8 to 14 Outlooks". Weather (Canada). Retrieved April 19, 2014.
  4. ↑ Toth, Zoltan; Kalnay, Eugenia (1993-12-01). "Ensemble Forecasting at NMC: The Generation of Perturbations". Bulletin of the American Meteorological Society. 74 (12): 2317–2330. Bibcode:1993BAMS...74.2317T. doi: 10.1175/1520-0477(1993)074<2317:efantg>2.0.co;2 . ISSN   0003-0007.
  5. ↑ Molteni, F.; Buizza, R.; Palmer, T. N.; Petroliagis, T. (1996-01-01). "The ECMWF Ensemble Prediction System: Methodology and validation". Quarterly Journal of the Royal Meteorological Society. 122 (529): 73–119. Bibcode:1996QJRMS.122...73M. doi:10.1002/qj.49712252905. ISSN   1477-870X.
  6. ↑ Palmer, T. N.; Doblas-Reyes, F. J.; Hagedorn, R.; Alessandri, A.; Gualdi, S.; Andersen, U.; Feddersen, H.; Cantelaube, P.; Terres, J-M. (2004-06-01). "Development of a european multimodel ensemble system for seasonal-to-interannual prediction (demeter)" (PDF). Bulletin of the American Meteorological Society. 85 (6): 853–872. Bibcode:2004BAMS...85..853P. doi:10.1175/BAMS-85-6-853. ISSN   0003-0007.
  7. ↑ Barnston, Anthony G.; Mason, Simon J.; Goddard, Lisa; Dewitt, David G.; Zebiak, Stephen E. (2003-12-01). "Multimodel Ensembling in Seasonal Climate Forecasting at IRI". Bulletin of the American Meteorological Society. 84 (12): 1783–1796. Bibcode:2003BAMS...84.1783B. doi: 10.1175/BAMS-84-12-1783 . ISSN   0003-0007.
  8. 1 2 Candille, Guillem; Beauregard, Stéphane; Gagnon, Normand (2010-06-22). "Bias Correction and Multiensemble in the NAEFS Context or How to Get a "Free Calibration" through a Multiensemble Approach". Monthly Weather Review. 138 (11): 4268–4281. Bibcode:2010MWRv..138.4268C. doi: 10.1175/2010MWR3349.1 . ISSN   0027-0644.
  9. ↑ Evensen, Geir (1994-05-15). "Sequential data assimilation with a nonlinear quasi-geostrophic model using Monte Carlo methods to forecast error statistics". Journal of Geophysical Research: Oceans. 99 (C5): 10143–10162. Bibcode:1994JGR....9910143E. doi:10.1029/94JC00572. hdl: 1956/3035 . ISSN   2156-2202.
  10. ↑ A. Peitroniro; et al. (2007). "Development of the MESH modelling system for hydrological ensemble forecasting of the Laurentian Great Lakes at the regional scale" (PDF). Hydrology and Earth System Sciences . 11 (4): 1279–1294. doi: 10.5194/hess-11-1279-2007 .
  11. ↑ "A Meeting of the Models: North American and International Multimodel Forecasting in Research and Operations". American Geophysical Union. January 2009. Retrieved April 19, 2014.
  12. 1 2 Candille, Guillem (May 5, 2009). "The Multiensemble Approach: The NAEFS Example". Monthly Weather Review . 137 (5).
  13. ↑ Zhu, Y.; Toth, Z.; Rutledge, Glenn K. "TIGGE and NAEFS: Research and operational developments in multi-center ensemble forecasting". American Geophysical Union, Spring Meeting 2008. Retrieved April 19, 2014.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.