The Community Climate System Model (CCSM) is a coupled general circulation model (GCM) developed by the University Corporation for Atmospheric Research (UCAR) with funding from the National Science Foundation (NSF), the Department of Energy (DoE), and the National Aeronautics and Space Administration (NASA). [1] The coupled components include an atmospheric model (Community Atmosphere Model), a land-surface model (Community Land Model), an ocean model (Parallel Ocean Program), and a sea ice model (Community Sea Ice Model, CICE). [2] CCSM is maintained by the National Center for Atmospheric Research (NCAR).
Its software design assumes a physical/dynamical component of the climate system and, as a freely available community model, is designed to work on a variety of machine architectures powerful enough to run the model. [3] The CESM codebase is mostly public domain with some segregable components issued under open source and other licenses. [4] The offline chemical transport model has been described as "very efficient". [5]
The model includes four submodels (land, sea-ice, ocean and atmosphere) connected by a coupler that exchanges information with the submodels. NCAR suggested that because of this, CCSM cannot be considered a single climate model, but rather a framework for building and testing various climate models. [6]
The Climatological Data Ocean Model (docn) is recently[ when? ] at version 6.0. It must be run within the framework of CCSM rather than standalone. [6] It takes two netCDF datasets as input and sends six outputs to the coupler, to be integrated with the output of the other submodels. [7]
The Community Atmosphere Model (CAM) can also be run as a standalone atmosphere model. Its most current version is 3.1, while 3.0 was the fifth generation. On May 17, 2002, its name was changed from the NCAR Community Climate Model to reflect its role in the new system. [8] It shares the same horizontal grid as the land model of CCSM: a 256×128 regular longitude/latitude global horizontal grid (giving a 1.4 degree resolution). It has 26 levels in the vertical. [9]
The polar component of ocean-atmosphere coupling includes sea ice geophysics using the formerly-known Los Alamos Sea Ice Model, CICE, now often referred to as the CICE Consortium model, to which NCAR has contributed code and physical improvements through the Polar Climate Working Group. [10] CICE simulates the growth, movement, deformation and melt of sea ice, critical for calculating energy and mass fluxes between the polar atmosphere and oceans in the earth system. [11] [12] [13]
The first version of CCSM was created in 1983 as the Community Climate Model (CCM). Over the next two decades it was steadily improved and was renamed CCSM after the Climate System Model (CSM) components were introduced in May 1996. [1] In June 2004 NCAR released the third version, which included new versions of all of the submodels. In 2007 this new version (commonly given the acronym CCSM3 or NCCCSM [14] ) was used in the IPCC Fourth Assessment Report, [15] alongside many others. In May 2010 NCAR released CCSM version 4 (CCSM4). On June 25, 2010 NCAR released the successor to CCSM, called the Community Earth System Model (CESM), version 1.0 (CESM1), as a unified code release that included CCSM4 as the code base for its atmospheric component.
Numerical climate models use quantitative methods to simulate the interactions of the important drivers of climate, including atmosphere, oceans, land surface and ice. They are used for a variety of purposes from study of the dynamics of the climate system to projections of future climate. Climate models may also be qualitative models and also narratives, largely descriptive, of possible futures.
A general circulation model (GCM) is a type of climate model. It employs a mathematical model of the general circulation of a planetary atmosphere or ocean. It uses the Navier–Stokes equations on a rotating sphere with thermodynamic terms for various energy sources. These equations are the basis for computer programs used to simulate the Earth's atmosphere or oceans. Atmospheric and oceanic GCMs are key components along with sea ice and land-surface components.
HadCM3 is a coupled atmosphere-ocean general circulation model (AOGCM) developed at the Hadley Centre in the United Kingdom. It was one of the major models used in the IPCC Third Assessment Report in 2001.
The Cooperative Institute for Research in Environmental Sciences (CIRES) is a research institute that is sponsored jointly by the National Oceanic and Atmospheric Administration (NOAA) Office of Oceanic and Atmospheric Research (OAR) and the University of Colorado Boulder (CU). CIRES scientists study the Earth system, including the atmosphere, hydrosphere, cryosphere, biosphere, and geosphere, and communicate these findings to decision makers, the scientific community, and the public.
The US National Center for Atmospheric Research is a US federally funded research and development center (FFRDC) managed by the nonprofit University Corporation for Atmospheric Research (UCAR) and funded by the National Science Foundation (NSF). NCAR has multiple facilities, including the I. M. Pei-designed Mesa Laboratory headquarters in Boulder, Colorado. Studies include meteorology, climate science, atmospheric chemistry, solar-terrestrial interactions, environmental and societal impacts.
Earth's climate system is a complex system having five interacting components: the atmosphere (air), the hydrosphere (water), the cryosphere, the lithosphere and the biosphere. Climate is the statistical characterization of the climate system, representing the average weather, typically over a period of 30 years, and is determined by a combination of processes in the climate system, such as ocean currents and wind patterns. Circulation in the atmosphere and oceans is primarily driven by solar radiation and transports heat from the tropical regions to regions that receive less energy from the Sun. The water cycle also moves energy throughout the climate system. In addition, different chemical elements, necessary for life, are constantly recycled between the different components.
Upper-atmospheric models are simulations of the Earth's atmosphere between 20 and 100 km that comprises the stratosphere, mesosphere, and the lower thermosphere. Whereas most climate models simulate a region of the Earth's atmosphere from the surface to the stratopause, there also exist numerical models which simulate the wind, temperature and composition of the Earth's tenuous upper atmosphere, from the mesosphere to the exosphere, including the ionosphere. This region is affected strongly by the 11 year Solar cycle through variations in solar UV/EUV/Xray radiation and solar wind leading to high latitude particle precipitation and aurora. It has been proposed that these phenomena may have an effect on the lower atmosphere, and should therefore be included in simulations of climate change. For this reason there has been a drive in recent years to create whole atmosphere models to investigate whether or not this is the case.
The Weather Research and Forecasting (WRF) Model is a numerical weather prediction (NWP) system designed to serve both atmospheric research and operational forecasting needs. NWP refers to the simulation and prediction of the atmosphere with a computer model, and WRF is a set of software for this. WRF features two dynamical (computational) cores, a data assimilation system, and a software architecture allowing for parallel computation and system extensibility. The model serves a wide range of meteorological applications across scales ranging from meters to thousands of kilometers.
In fluid dynamics, the von Kármán constant, named for Theodore von Kármán, is a dimensionless constant involved in the logarithmic law describing the distribution of the longitudinal velocity in the wall-normal direction of a turbulent fluid flow near a boundary with a no-slip condition. The equation for such boundary layer flow profiles is:
Geophysical Fluid Dynamics Laboratory Coupled Model is a coupled atmosphere–ocean general circulation model (AOGCM) developed at the NOAA Geophysical Fluid Dynamics Laboratory in the United States. It is one of the leading climate models used in the Fourth Assessment Report of the IPCC, along with models developed at the Max Planck Institute for Climate Research, the Hadley Centre and the National Center for Atmospheric Research.
Yellowstone was the inaugural supercomputer at the NCAR-Wyoming Supercomputing Center (NWSC) in Cheyenne, Wyoming. It was installed, tested, and readied for production in the summer of 2012. The Yellowstone supercomputing cluster was decommissioned on December 31, 2017, being replaced by its successor Cheyenne.
The Climate Forecast System or coupled forecast system is a medium to long range numerical weather prediction and a climate model run by the National Centers for Environmental Prediction (NCEP) to bridge weather and climate timescales. Version 2 became operational as CFSv2 in 2011.
Julie Michelle Arblaster is an Australian scientist. She is a Professor in the School of Earth, Atmosphere and Environment at Monash University. She was a contributing author on reports for which the Intergovernmental Panel on Climate Change (IPCC) was a co-recipient of the 2007 Nobel Peace Prize. Arblaster was a lead author on Chapter 12 of the IPCC Working Group I contribution to the IPCC Fifth Assessment Report in 2013. She has received the 2014 Anton Hales Medal for research in earth sciences from the Australian Academy of Science, and the 2017 Priestley Medal from the Australian Meteorological and Oceanographic Society. She has been ranked as one of the Top Influential Earth Scientists of 2010-2020, based on citations and discussion of her work.
The Model for Prediction Across Scales (MPAS) is an Earth system modeling software that integrates atmospheric, oceanographic, and cryospheric modeling across scales from regional to planetary. It includes climate and weather modeling and simulations that were used initially by researchers in 2013. The atmospheric models were created by the Earth System Laboratory at the National Center for Atmospheric Research and the oceanographic models were created by the Climate, Ocean, and Sea Ice Modeling Group at Los Alamos National Laboratory. The software has been used to model real-time weather as well as seasonal forecasting of convection, tornadoes and tropical cyclones. The atmospheric modeling component of the software can be used with other atmospheric modeling software including the Weather Research and Forecasting Model, the Global Forecast System, and the Community Earth System Model.
The Community Earth System Model (CESM) is a fully coupled numerical simulation of the Earth system consisting of atmospheric, ocean, ice, land surface, carbon cycle, and other components. CESM includes a climate model providing state-of-art simulations of the Earth's past, present, and future. It is the successor of the Community Climate System Model (CCSM), specifically version 4 (CCSMv4), which provided the initial atmospheric component for CESM. Strong ensemble forecasting capabilities, CESM-LE, were developed at the onset to control for error and biases across different model runs (realizations). Simulations from the Earth's surface through the thermosphere are generated utilizing the Whole Atmosphere Community Climate Model (WACCM). CESM1 was released in 2010 with primary development by the Climate and Global Dynamics Division (CGD) of the National Center for Atmospheric Research (NCAR), and significant funding by the National Science Foundation (NSF) and the Department of Energy (DoE).
Cecilia M. Bitz is an American climatologist known for her research on sea ice and high-latitude climate change. She is a professor and chair in the Atmospheric Sciences Department, as well as the director of the Program on Climate Change at the University of Washington. She was featured on NPR's All Things Considered segment to speak about factors that lead to sea ice loss in 2007, and testified before the United States Senate committee of Energy and Natural Resources on arctic opportunities in 2015.
CICE is a computer model that simulates the growth, melt and movement of sea ice. It has been integrated into many coupled climate system models as well as global ocean and weather forecasting models and is often used as a tool in Arctic and Southern Ocean research. CICE development began in the mid-1990s by the United States Department of Energy (DOE), and it is currently maintained and developed by a group of institutions in North America and Europe known as the CICE Consortium. Its widespread use in earth system science in part owes to the importance of sea ice in determining Earth's planetary albedo, the strength of the global thermohaline circulation in the world's oceans, and in providing surface boundary conditions for atmospheric circulation models, since sea ice occupies a significant proportion (4-6%) of earth's surface. CICE is a type of cryospheric model.
Bette Otto-Bliesner is an earth scientist known for her modeling of Earth's past climate and its changes over different geological eras.
Marika Holland is a scientist at the National Center for Atmospheric Research known for her work on modeling sea ice and its role in the global climate.
Sukyoung Lee is a professor at Pennsylvania State University known for her research on circulation in Earth's atmosphere and the Southern Ocean. In 2021 Lee was elected a fellow of the American Geophysical Union.