This article contains content that is written like an advertisement .(April 2023) |
Release date | May 31, 2016 [1] |
---|---|
Introductory price | US$9 [2] |
Operating system | Linux (Debian) [3] |
CPU | 1 GHz R8M/R8 (ARMv7) [4] |
Memory | 512 MB DDR3 SDRAM [5] |
Storage | 4 GB - 8 GB onboard [5] [6] |
Power | 5 V DC >500 mA, wired or optional battery [5] |
CHIP (stylized as C.H.I.P.) was a single-board computer crowdfunded by now-defunct Next Thing Co. (NTC), released as open-source hardware running open-source software. [7] It was advertised as "the world's first $9 computer". CHIP and related products are discontinued. NTC has since gone insolvent.
C.H.I.P. is an affordable single-board computer developed by Next Thing Co. Retailing for just $9, it features a 1GHz ARMv7 processor, 512MB of RAM, and 3.8GB (approximately 4GB) of storage, running a customised, lightweight Debian-based operating system. The device also includes onboard Wi-Fi and Bluetooth, making it a versatile option for both standalone computing and integration into various hardware projects, as you have 3.2GB of free storage. [8]
Next Thing Co. was an Oakland, California based start-up company founded in 2013 by Dave Rauchwerk, Gustavo Huber and Thomas Deckert. [9] NTC initially launched the CHIP computer via a successful Kickstarter campaign in May 2015. The campaign started with a goal of US$50,000, and ended with 39,560 backers pledging US$2,071,927. [5]
Next Thing began shipping alpha boards to "Kernel Hacker" backers on September 25, 2015. [10] First customer shipping (for Kickstarter backers) began by May 31, 2016. [1] [11] Pre-orders opened by December 2015. [12] Pre-orders for the original CHIP had stopped by April 4, 2017, as the line was discontinued. [13]
By March 2018, Next Thing Co. had entered insolvency. Many customers still had not received their pre-orders. [14]
CHIP was the original board, mostly targeting hobbyists. The system is built around the Allwinner R8 SoC processor, which integrates an ARM Cortex-A8 CPU (based on ARM architecture V7-A) and peripherals, such as Graphic Engine, UART, SPI, USB ports, CIR, CMOS Sensor Interface and LCD controller. [15] The CPU is also accompanied by a NEON SIMD coprocessor and has RCT JAVA-Accelerations to optimize just-in-time (JIT) and dynamic adaptive compilation (DAC). There is also an ARM Mali-400 GPU, and a H263, H264 and vp8 hardware video decoder in the R8. [16]
CHIP was upgraded in April 2017 in anticipation of the CHIP Pro to "share a large number of the same components". [13]
Features implemented on this model:
The CHIP is 60mm × 40mm in size. [22]
CHIP Pro is similar to the original CHIP board, but uses the newer GR8 version of the chip. It is a system in package (SiP) made by Next Thing Co. It features a 1GHz Allwinner R8 ARMv7 Cortex-A8 processor with NEON SIMD extensions and a Mali-400 GPU. 256MB of Nanya Technology DDR3 SDRAM is combined with the R8 SoC into a 14mm × 14mm, 0.8mm-pitch 252-ball FBGA package, simplifying the routing of connections. Instead of having two dual-line 40-pin sockets as on CHIP, it implements castellated edges where the pin holes are designed and optimized to embed to another board with SMT. [23] Most of the CHIP's hardware features are also included in this model.
Few details were available in regard to CHIP's would-be successor or successors except it would have used Next Thing's own SiP GR8 instead of Allwinner's original R8. In addition to feature-sharing with CHIP Pro, the company wanted to "take advantage of CHIP Pro's much more stable supply chain" [13] in order to address the uneasiness in its user base about the future of the product. [24] In responding to user concerns, Next Thing also disclosed that more than one successor product line was in the works. [25]
As Next Thing Co. entered insolvency with its assets and intellectual properties being sold, [14] release of "v2" is improbable.
In addition to open-source hardware and software, Next Thing also published an HPI and an API for users to develop add-ons boards called "DIP" [26] The company produced several DIPs including the Pocket CHIP.
Pocket CHIP included a CHIP, a case with a 4.3 inch 480×272 pixel resistive touchscreen, a clicky keyboard, GPIO headers on the top of the device, GPIO soldering pads inside of the injection molded case, and a 5-hour battery. Following DIP specifications, the CHIP snapped into the case with no "screws or glues" creating a portable computer. On the lower right corner of the Pocket CHIP was a hexagonal hole that takes a standard #2 HB pencil. Inserting the pencil created a stand that allowed the Pocket CHIP to stand upright on a desk. Likewise, on the lower left is a circular hole for a pen.
PocketCHIP came loaded with a special edition of CHIP OS that included the DIP's driver and a couple of additional applications, including a special version of video game console virtual machine PICO-8, a fully functional Linux terminal, a file browser, a terminal based web browser called surf, and modular synthesizer SunVox.
The Pockulus is a virtual reality setup incorporating a Pocket CHIP that requires some 3D printing.
For users who did not want to use the small screen in Pocket CHIP and also did not want to use the built-in composite TV output, Next Thing sold a VGA DIP [27] and an HDMI DIP. [28] Unlike Pocket CHIP, physical dimensions of these DIPs are similar to CHIP, so the snapped assembly looks like a thicker CHIP.
CHIP received favorable reviews, and constant comparisons to Raspberry Pi. Laura Sydell of NPR asked if the device could "spark a new wave of tinkering and innovation", noting it was also open source hardware. [29] Marco della Cava of USA Today said that the device "represent[s] opportunities to both close the technology gap in developing and developed countries alike, while encouraging children to learn coding, due to their approachable design". [30]
Reviewers also noted its low price. Bo Moore of PC Gamer said the price of CHIP "[puts] Raspberry Pi 2 to shame", [31] and Ian Paul of PCWorld said it made "Raspberry Pi's price seem luxurious". [32] Within days of the launch of its Kickstarter, US national media outlets like The Washington Post and Time followed with glowing coverage. [33] [34] Even Fortune joined the chorus with headline "This $9 computer could change the economics of building hardware." [35]
Since its alpha shipping, CHIP has attracted an enthusiastic user base, communicating mainly on NTC's bulletin board system (BBS). At the time of NTC's demise, the BBS had over 10,000 users, with hundreds of active users and hundreds of postings every month, to a total of over 100,000. [36]
Despite enthusiasm from reviewers and users, Next Thing Co. declared bankruptcy in March 2018, leaving many pre-order customers with undelivered orders. [14]
While NTC has published many of its hardware and software repositories on GitHub, surviving users also launched an effort in order to preserve useful documents, software, and other artifacts by leveraging the Internet Archive (a.k.a. archive.org). One effort is led by a user who has never received his preordered CHIP. [37] Another user set up a standalone site focusing on binary packages and a Git repository. [38]
In addition, the community also has a Wiki site that is independent of NTC. [39] However, as of 2021, the website ceased to function. The original content is however available in the Internet Archive snapshot [40] from November 2020.
In computing, a plug and play (PnP) device or computer bus is one with a specification that facilitates the recognition of a hardware component in a system without the need for physical device configuration or user intervention in resolving resource conflicts. The term "plug and play" has since been expanded to a wide variety of applications to which the same lack of user setup applies.
The boot ROM is a type of ROM that is used for booting a computer system. There are two types: a mask boot ROM that cannot be changed afterwards and a boot EEPROM, which can contain an UEFI implementation.
Wireless network cards for computers require control software to make them function. This is a list of the status of some open-source drivers for 802.11 wireless network cards.
The BeagleBoard is a low-power open-source single-board computer produced by Texas Instruments in association with Digi-Key and Newark element14. The BeagleBoard was also designed with open source software development in mind, and as a way of demonstrating the Texas Instrument's OMAP3530 system-on-a-chip. The board was developed by a small team of engineers as an educational board that could be used in colleges around the world to teach open source hardware and software capabilities. It is also sold to the public under the Creative Commons share-alike license. The board was designed using Cadence OrCAD for schematics and Cadence Allegro for PCB manufacturing; no simulation software was used.
Rockchip is a Chinese fabless semiconductor company based in Fuzhou, Fujian province. Rockchip has been providing SoC products for tablets & PCs, streaming media TV boxes, AI audio & vision, IoT hardware since founded in 2001. It has offices in Shanghai, Beijing, Shenzhen, Hangzhou and Hong Kong. It designs system on a chip (SoC) products, using the ARM architecture licensed from ARM Holdings for the majority of its projects.
Raspberry Pi is a series of small single-board computers (SBCs) developed in the United Kingdom by the Raspberry Pi Foundation in association with Broadcom. The Raspberry Pi project originally leaned toward the promotion of teaching basic computer science in schools. The original model became more popular than anticipated, selling outside its target market for diverse uses such as robotics, home automation, industrial automation, and by computer and electronic hobbyists, because of its low cost, modularity, open design, and its adoption of the HDMI and USB standards.
The Allwinner A1X is a family of single-core SoC devices designed by Allwinner Technology from Zhuhai, China. Currently the family consists of the A10, A13, A10s and A12. The SoCs incorporate the ARM Cortex-A8 as their main processor and the Mali 400 as the GPU.
Cubieboard is a single-board computer, made in Zhuhai, Guangdong, China. The first short run of prototype boards were sold internationally in September 2012, and the production version started to be sold in October 2012. It can run Android 4 ICS, Ubuntu 12.04 desktop, Fedora 19 ARM Remix desktop, Armbian, Arch Linux ARM, a Debian-based Cubian distribution, FreeBSD, or OpenBSD.
Allwinner Technology Co., Ltd is a Chinese fabless semiconductor company specialized in mixed-signal systems on a chips (SoC). The company is headquartered in Zhuhai, Guangdong, China.
OLinuXino is an open hardware single-board computer capable of running Android or Linux designed by OLIMEX Ltd in Bulgaria.
Banana Pi is a line of single-board computers produced by the Chinese company Shenzhen SINOVOIP Company, its spin-off Guangdong BiPai Technology Company, and supported by Hon Hai Technology (Foxconn). Its hardware design was influenced by the Raspberry Pi, and both lines use the same 40-pin I/O connector.
The Micro Bit is an open source hardware ARM-based embedded system designed by the BBC for use in computer education in the United Kingdom. It was first announced on the launch of BBC's Make It Digital campaign on 12 March 2015 with the intent of delivering 1 million devices to pupils in the UK. The final device design and features were unveiled on 6 July 2015 whereas actual delivery of devices, initially planned for September 2015 to schools and October 2015 to general public, began on 10 February 2016.
The ESP8266 is a low-cost Wi-Fi microcontroller, with built-in TCP/IP networking software, and microcontroller capability, produced by Espressif Systems in Shanghai, China.
Endless Mobile, Inc. is an American information technology company that develops the Linux-based operating system Endless OS and reference platform hardware for it. The company was founded in 2011 and is based in San Francisco, California, U.S. with an additional office in Rio de Janeiro, Brazil.
Pine Store Limited, doing business as Pine64, is a Hong Kong-based organization that designs, manufactures, and sells single-board computers, notebook computers, as well as smartwatch/smartphones. Its name was inspired by the mathematical constants pi and e with a reference to 64-bit computing power.
PICO-8 is a virtual machine and game engine created by Lexaloffle Games. It is a fantasy video game console that mimics the limited graphical and sound capabilities of the old 8-bit systems of the 1980s to encourage creativity and ingenuity in producing games without being overwhelmed with the many possibilities of modern tools and machines. Such limitations also give PICO-8 games a particular look and feel.
Samsung DeX is a feature included on some high-end Samsung handheld devices that enables users to extend their device into a desktop-like experience by connecting a keyboard, mouse, and monitor. The name "DeX" is a contraction of "Desktop eXperience".
The Pinebook is a low-cost notebook developed by Hong Kong-based computer manufacturer Pine64. The Pinebook was announced in November 2016 and production started in April 2017. It is based on the platform of Pine64's existing Pine A64 single board computer, costing US$89 or US$99 for the 11.6" and 14" model respectively. Its appearance resembles the MacBook Air. The Pinebook is sold "at-cost" by Pine64 as a community service.
The Libre Computer Project is an effort initiated by Shenzhen Libre Technology Co., Ltd., with the goal of producing standards-compliant single-board computers (SBC) and upstream software stack to power them.
{{cite web}}
: CS1 maint: numeric names: authors list (link)