Cutdown

Last updated

A cutdown is a customised scooter (usually an Italian Vespa or Lambretta) with parts of the bodywork removed or cut away. Cutdowns were popular amongst skinheads and scooterboys during the mod revival of the 1970s and 1980s. While the style-obsessed British mod youth subculture of the 1960s prized the glamorous, metropolitan image of scooters, many skinheads and scooterboys viewed their bikes as simply a form of transportation. [1] [2]

Contents

This "naked" Lambretta has been cut down and customized. Naked Lambretta 01.jpg
This "naked" Lambretta has been cut down and customized.

While some scooter enthusiasts have focused on the stripped-down look, with just a bare frame and visible engine and mechanical parts, some scooterboys put back almost as much hardware as they had taken off, by adding customized chrome-plated accessories and racks.

Modifications

Many cutdowns have unneeded parts removed to improve power-to-weight ratio. Typically the front mudguards, leg shields, floors, rear section and side panels are removed. Cutting away body parts is the easiest with Lambretta scooters, because they are built on a tubular frame, which means that the body parts do not have a structural role. Vespa scooters, on the other hand, are usually built with a unibody design, so the body panels give the bike its structure. This means that when Vespas are cut down, they cannot be made as bare-bones as a Lambretta. The body panels of a Vespa are modified by slimming them down or giving them a different shape, in such a way that the structural soundness of the bike is not compromised.

Cutdowns are often tuned – much like a four-wheeled hot rod – by overboring the cylinders to increase engine power or adding performance exhausts, modified carburettors, or aftermarket shock absorbers. Some enthusiasts replace the standard drum front brakes with hydraulic disc brakes or add water cooling radiators. Lambretta owners may replace existing parts with a Nikasil plated aluminium barrel with radical porting, large Dell'Orto or Mikuni carburettors and bespoke (custom-made) expansion chambers, hydraulic clutches, and modern low-profile tyres. Some scooterists use aluminum Fabrizi racing barrels, because they use a rotary induction mechanism. Stock gas tanks may be replaced with increased capacity tanks, which put the weight of the fuel further forward. Some riders install a small fairing to reduce wind resistance and enable higher speeds and stability. To reduce weight, some scooterists use lighter-weight aftermarket parts, such as carbon fibre sports seats and other parts made from carbon fibre, carbon kevlar and fiberglass.

Some cutdowns have been used for drag racing. At scooter races, cutdowns often race in a separate category called the "specials", which is for cutdown and heavily modified racing scooters. The other scooter race categories include stock races with relatively unmodified larger scooters (152 to 250 cc) and "small frame" races for scooters with 136 cc or smaller engines. For races, scooters usually have to have accessories removed, such as center and side stands, mirrors, turn signals that stick out, and luggage racks. Scooter races often disallow performance-enhancing fuel additives such as octane booster.

A Baja 150cc scooter. Twist N' Go Baja 150cc 1.jpg
A Baja 150cc scooter.

A cutdown scooter resembles a "naked scooter", which is a scooter designed without panels covering the engine and with little or no bodywork. The difference between the two types is that while a cutdown scooter started as a regular scooter with body panels and bodywork, before it was customized, a "naked scooter" is designed and manufactured as a "bare-bones" vehicle. In the 1960s, Lambretta models A through D were in this category. In the 1990s, Italjet produced a stripped-down scooter called the Dragster. In the 2000s Honda produced the Ruckus, which had the motor mounted in a skeleton-style metal frame.

The Honda Ruckus uses a skeleton-style frame without body paneling Honda ruckus-side.png
The Honda Ruckus uses a skeleton-style frame without body paneling

Another scooter type which is related to cutdowns is the "chopper", which is an extreme cutdown scooter with extra-long front forks. These bikes are mostly made using Lambrettas, because when the bodywork is removed from their tubular frame they resemble smaller custom style motorcycles. "Rats" are cutdowns which are made by putting together old parts to create a rough-looking, unpainted bike. In contrast to many other scooter enthusiasts, "rat" builders view blemishes and unrepaired dents as attractive. The "rat" approach to scooter customizing is similar to the rat rod style of hot rodding, in which old cars often have original paint with rust patches, or even just bare rusty metal. Major scooter rallies which give prizes to scooters sometimes put "chopper" and "rat" scooters in a separate category from the rest of the cutdowns.

See also

Related Research Articles

Vespa Italian scooter

Vespa is an Italian brand of scooter manufactured by Piaggio. The name means wasp in Italian. The Vespa has evolved from a single model motor scooter manufactured in 1946 by Piaggio & Co. S.p.A. of Pontedera, Italy to a full line of scooters and one of seven companies today owned by Piaggio.

Hot rod American car with large engine modified for linear speed

Hot rods are typically old, classic or modern American cars with large engines modified for faster speed. The origin of the term "hot rod" is unclear. For example, some claim that the term "hot" refers to the vehicle being stolen. Other origin stories include replacing the engine's camshaft or "rod" with a higher performance version. Hot rods were favorites for greasers.

Trojan (automobile) British automobile manufacturer producing light cars between 1914 and 1965

Trojan was a British automobile manufacturer producing light cars between 1914 and 1965, and light commercial vehicles for a short time.

Rat rod a custom car with a deliberately worn-down, unfinished appearance, typically lacking paint, showing rust, and made from cheap or cast-off parts

The modern definition of a "rat rod" is a custom car with a deliberately worn-down, unfinished appearance, typically lacking paint, showing rust, and made from cheap or cast-off parts. These parts can include non-automotive items that have been repurposed, such as using a rifle as a gear shifter, wrenches as door handles, and old saws as sun visors. A rat rod may or may not have extraneous decorations, but will always exude a great deal of personality due to the imagination required of the builder.

Maico

For the manga series, see Maico 2010.

Types of motorcycles

There are many systems for classifying types of motorcycles, describing how the motorcycles are put to use, or the designer's intent, or some combination of the two. Six main categories are widely recognized: cruiser, sport, touring, standard, dual-purpose, and dirt bike. Sometimes sport touring motorcycles are recognized as a seventh category. Strong lines are sometimes drawn between motorcycles and their smaller cousins, mopeds, scooters, and underbones, but other classification schemes include these as types of motorcycles.

Lambretta Special X

The Lambretta Special X (SX), was production Scooter made by Innocenti Lambretta from 1966-69 it replaced the Li Special 150 and TV200.

Lambretta Li Special

The Lambretta Li Special was made from 1963 to 1969 by Italian manufacturer Innocenti based in Milan. It was introduced as a sportier version of the Lambretta Li Series III but cheaper than the Lambretta TV Series III.

Triumph T140W TSS

The T140W TSS was the last motorcycle model made by Triumph Engineering at their Meriden factory.

Scooter (motorcycle) type of motorcycle

A scooter or motor scooter is a type of motorcycle with a step-through frame and a platform for the rider's feet. Elements of scooter design were present in some of the earliest motorcycles, and scooters have been made since at least 1914. Scooter development continued in Europe and the United States between the World Wars.

Maicoletta

The Maicoletta was a motor scooter built by Maico from 1955 to 1966. It was noted by motorcycle journalists in the United States and the United Kingdom for being powerful, responsive, and comfortable. It was one of the heaviest and most expensive motor scooters with typical styling and engineering of its time, and comparable to other manufacturers' products such as Heinkel Tourist, Zündapp Bella and the British Triumph Tigress and BSA Sunbeam.

Lambretta Line of Italian scooters (and name of a moped, "Lambretta 48")

Lambretta is the brand name of mainly motor scooters, initially manufactured in Milan, Italy, by Innocenti.

Brumana Pugliese S.A. was a Brazilian motorcycle and scooter manufacturer that ceased trading in 1982. Its predecessor companies were Lambretta do Brasil and Pasco Lambretta.

Scooterboy

A scooterboy is a member of one of several scooter-related subcultures of the 1960s and later decades, alongside rude boys, mods and skinheads. The term is sometimes used as a catch-all designation for any scootering enthusiast who does not fall into the latter three categories.

Lambretta GP/DL

The Lambretta GP/DL range was the final range of classic Lambrettas to be produced before Lambretta was sold to British Leyland Motor Corporation in 1971. The range was called the DL in most countries, but was called the GP in Britain and some other countries. This was to associate the scooters with Formula One which was extremely popular and successful in the late 1960s.

Lambretta Model C

The Lambretta Model C was the third production Scooter made by Innocenti's Lambretta. The Model C was the first Lambretta scooter to be imported the United Kingdom. The C is seen as a more reliable bike than previous models although it remained very similar to its predecessors.

The Lambretta V-Special is a scooter produced by Innocenti S.A. under the brand name Lambretta. The bike has been introduced in 3 models the V50 Special, V125 Special and the V200 Special. The V-Special began production in 2017 and is based on the SYM Fiddle.

Lambretta Model D Scooter built by Lambretta

The Lambretta Model D was a scooter produced by Lambretta as a direct replacement for the Model C. The Model D was the first Innocenti scooter to be manufactured outside of Italy as the licence was sold in Europe, Asia and South America.

The Scomadi Turismo Leggera, also known as TL, is the first scooter made by Scomadi. It was made to fill the gap for a 'retro styled' 'modern scooter'.

References

  1. Sarti, Doug (June 3, 2004). "Vespa Scoots Sexily Back to Vancouver". Straight.com. Vancouver, Canada: Vancouver Free Press. Archived from the original on 2011-05-22. Retrieved 2012-06-30.
  2. Long, Mary Anne (1998-12-17). "From Scooter to Scooterist: A Cultural History of the Italian Motorscooter" (PDF). p. 20. Archived from the original (PDF) on 2011-07-17. Retrieved 2010-08-28.