 | This article does not cite any sources .(June 2010) (Learn how and when to remove this template message) |
The EN 10080: Steel for the reinforcement of concrete is a European Standard. This standard is referenced by EN 1992.
| | This article does not cite any sources .(June 2010) (Learn how and when to remove this template message) |
The EN 10080: Steel for the reinforcement of concrete is a European Standard. This standard is referenced by EN 1992.
| History | |
|---|---|
| Composition | |
| Production | |
| Science | |
| Types | |
| Construction | |
| Organizations | |
| Standards | |
 | This engineering-related article is a stub. You can help Wikipedia by expanding it. |
Deutsches Institut für Normung e.V. is the German national organization for standardization and is the German ISO member body. DIN is a German Registered Association (e.V.) headquartered in Berlin. There are currently around thirty thousand DIN Standards, covering nearly every field of technology.
Nondestructive testing (NDT) is a wide group of analysis techniques used in science and technology industry to evaluate the properties of a material, component or system without causing damage. The terms nondestructive examination (NDE), nondestructive inspection (NDI), and nondestructive evaluation (NDE) are also commonly used to describe this technology. Because NDT does not permanently alter the article being inspected, it is a highly valuable technique that can save both money and time in product evaluation, troubleshooting, and research. The six most frequently used NDT methods are eddy-current, magnetic-particle, liquid penetrant, radiographic, ultrasonic, and visual testing. NDT is commonly used in forensic engineering, mechanical engineering, petroleum engineering, electrical engineering, civil engineering, systems engineering, aeronautical engineering, medicine, and art. Innovations in the field of nondestructive testing have had a profound impact on medical imaging, including on echocardiography, medical ultrasonography, and digital radiography.
A steel-toe boot is a durable boot or shoe that has a protective reinforcement in the toe which protects the foot from falling objects or compression, usually combined with a mid sole plate to protect against punctures from below.
The Brinell scale characterizes the indentation hardness of materials through the scale of penetration of an indenter, loaded on a material test-piece. It is one of several definitions of hardness in materials science.
The ISO international standard ISO 9 establishes a system for the transliteration into Latin characters of Cyrillic characters constituting the alphabets of many Slavic and non-Slavic languages.
The European Committee for Standardization is a public standards organization whose mission is to foster the economy of the European Union (EU) in global trading, the welfare of European citizens and the environment by providing an efficient infrastructure to interested parties for the development, maintenance and distribution of coherent sets of standards and specifications.
International standard ISO 1000 is the ISO standard describing the International System of Units (SI).
British Standard Pipe (BSP) is a family of technical standards for screw threads that has been adopted internationally for interconnecting and sealing pipes and fittings by mating an external (male) thread with an internal (female) thread. It has been adopted as standard in plumbing and pipe fitting, except in the United States, where NPT and related threads are the standard used.
ISO 13485 Medical devices -- Quality management systems -- Requirements for regulatory purposes is an International Organization for Standardization (ISO) standard published for the first time in 1996; it represents the requirements for a comprehensive quality management system for the design and manufacture of medical devices. This standard supersedes earlier documents such as EN 46001 and EN 46002, the previously published ISO 13485, and ISO 13488. ISO 13485:2016 Certificates meets the requirement of IEC 60601-2-25 : 1993 + A1: 1999 safety of Electrocardiograms.
The European standard EN 62262 — the equivalent of international standard IEC 62262 (2002) — relates to IK ratings. This is an international numeric classification for the degrees of protection provided by enclosures for electrical equipment against external mechanical impacts. It provides a means of specifying the capacity of an enclosure to protect its contents from external impacts. The IK Code was originally defined in European Standard BS EN 50102. Following its adoption as an international standard in 2002, the European standard was renumbered EN 62262.
ISO 4165 is a standard adopted by the International Organization for Standardization (ISO) that describes a double-pole DC connector to supply between 12 and 24 V DC at up to 12 amps to appliances in vehicles. Although roughly similar in design to an automotive accessory receptacle, the ISO 4165 connector is shorter and smaller in diameter. It was originally a standard fitting on all the German military vehicles during World War II.
The RKM code, also referred to as "letter and digit code for resistance and capacitance values and tolerances" or "R notation", is a notation to specify resistor and capacitor values defined in the international standard IEC 60062 since 1952. It is also adopted by various other standards including DIN 40825 (1973), BS 1852 (1974), IS 8186 (1976) and EN 60062 (1993). The significantly updated IEC 60062:2016 comprises the most recent release of the standard.
The dash is a punctuation mark that is similar in appearance to U+002D - HYPHEN-MINUS and U+2212 − MINUS SIGN, but differs from these symbols in both length and height. The most common versions of the dash are the en dash (–), equal to half the height of the font; the em dash (—), twice as long as the en dash; and the horizontal bar (―), whose length varies across typefaces.
ISO 50001 Energy management systems – Requirements with guidance for use is a specification created by the International Organization for Standardization (ISO) for an energy management system. The standard specifies the requirements for establishing, implementing, maintaining and improving an energy management system, whose purpose is to enable an organization to follow a systematic approach in achieving continual improvement of energy performance, including energy efficiency, energy security, energy use and consumption. The standard aims to help organizations continually reduce their energy use, and therefore their energy costs and their greenhouse gas emissions.
The C programming language has a set of functions implementing operations on strings in its standard library. Various operations, such as copying, concatenation, tokenization and searching are supported. For character strings, the standard library uses the convention that strings are null-terminated: a string of n characters is represented as an array of n + 1 elements, the last of which is a "NUL" character.
ISO 10218 Robots and robotic devices — Safety requirements for industrial robots is an international standard for robot safety, developed by ISO/TC 184/SC 2 "Robots and robotic devices" in parallel with the European Committee for Standardization. It consists of two parts:
Flemish (Vlaams) also called Flemish Dutch (Vlaams-Nederlands), Belgian Dutch, or Southern Dutch (Zuid-Nederlands), is a Lower Franconian / Dutch dialect. It is spoken in the whole northern region of Belgium as well as French Flanders and the Dutch Zeelandic Flanders by approximately 6.5 million people. The term is used in at least five ways. These are:
The ISO-standard ISO 15398 regulates the minimum requirements, proofs of suitability and auditing standards for manhole covers made of thermoplastics.
ISO 45001 is an ISO standard for management systems of occupational health and safety (OH&S), published in March 2018. The goal of ISO 45001 is the reduction of occupational injuries and diseases.
ISO 17100:2015 Translation Services-Requirements for Translation Services was published on May 1, 2015. It was prepared by the International Organization for Standardization's Technical Committee ISO/TC 37, Terminology and other language and content resources, Subcommittee SC 5, Translation, interpreting and related technology.
